Enhancement of power generation by toluene biodegradation in a microbial fuel cell in the presence of pyocyanin

Efficient Enhancement of Extracellular Electron Transfer in Shewanella oneidensis MR-1 via CRISPR-Mediated Transposase Technology

Electroactive bacteria, exemplified by Shewanella oneidensis MR-1, have garnered significant attention due to their unique extracellular electron-transfer (EET) capabilities, which are crucial for energy recovery and pollutant conversion. However, the practical application of MR-1 is constrained by its EET efficiency, a key limiting factor, due to the complexity of research methodologies and the challenges associated with the practical use of gene editing tools. To address this challenge, a novel gene integration system, INTEGRATE, was developed, utilizing CRISPR-mediated transposase technologies for precise genomic insertion within the S. oneidensis MR-1 genome. This system facilitated the insertion of extensive gene segments at different sites of the Shewanella genome with an efficiency approaching 100%. The inserted cargo genes could be kept stable on the genome after continuous cultivation. The enhancement of the organism's EET efficiency was realized through two primary strategies: the integration of the phenazine-1-carboxylic acid synthesis gene cluster to augment EET efficiency and the targeted disruption of the SO3350 gene to promote anodic biofilm development. Collectively, our findings highlight the potential of utilizing the INTEGRATE system for strategic genomic alterations, presenting a synergistic approach to augment the functionality of electroactive bacteria within bioelectrochemical systems.

Electricity generation and real oily wastewater treatment by Pseudomonas citronellolis 620C in a microbial fuel cell: pyocyanin production as electron shuttle

In the present study, the potential of Pseudomonas citronellolis 620C strain was evaluated, for the first time, to generate electricity in a standard, double chamber microbial fuel cell (MFC), with oily wastewater (OW) being the fuel at 43.625 mg/L initial chemical oxygen demand (COD). Both electrochemical and physicochemical results suggested that this P. citronellolis strain utilized efficiently the OW substrate and generated electricity in the MFC setup reaching 0.05 mW/m2 maximum power. COD removal was remarkable reaching 83.6 ± 0.1%, while qualitative and quantitative gas chromatography/mass spectrometry (GC/MS) analysis of the OW total petroleum and polycyclic aromatic hydrocarbons, and fatty acids revealed high degradation capacity. It was also determined that P. citronellolis 620C produced pyocyanin as electron shuttle in the anodic MFC chamber. To the authors' best knowledge, this is the first study showing (phenazine-based) pyocyanin production from a species other than P. aeruginosa and, also, the first time that P. citronellolis 620C has been shown to produce electricity in a MFC. The production of pyocyanin, in combination with the formation of biofilm in the MFC anode, as observed with scanning electron microscopy (SEM) analysis, makes this P. citronellolis strain an attractive and promising candidate for wider MFC applications.

A biomedical perspective of pyocyanin from Pseudomonas aeruginosa: its applications and challenges

Pyocyanin is a bioactive pigment produced by Pseudomonas aeruginosa. It is an important virulence factor that plays a critical role in P. aeruginosa infections as a redox-active secondary metabolite and a quorum sensing (QS) signaling molecule. Pyocyanin production from chorismic acid requires the involvement of two homologous operons, phz1 and phz2, which are activated by QS regulatory proteins. Pyocyanin inhibits the proliferation of bacterial, fungal, and mammalian cells by inducing oxidative stress due to which it acts as a potent antibacterial, antifungal, and anticancer agent. Its potential role as a neuroprotectant needs further exploration. However, pyocyanin exacerbates the damaging effects of nosocomial infections caused by P. aeruginosa in immunocompromised individuals. Further, cystic fibrosis (CF) patients are highly susceptible to persistent P. aeruginosa infections in the respiratory system. The bacterial cells form colonies and three interconnected QS networks-pqs, las, and rhl-get activated, thus stimulating the cells to produce pyocyanin which exacerbates pulmonary complications. As an opportunistic pathogen, P. aeruginosa produces pyocyanin to impede the recovery of injuries like burn wounds through its anti-proliferative activity. Moreover, pyocyanin plays a vital role in compounding P. aeruginosa infections by promoting biofilm formation. This review begins with a brief description of the characteristics of pyocyanin, its activity, and the different aspects of its production including its biosynthesis, the role of QS, and the effect of environmental factors. It then goes on to explore the potential applications of pyocyanin as a biotherapeutic molecule while also highlighting the biomedical challenges and limitations that it presents.

Treatment of phenolic wastewater by anaerobic fluidized bed microbial fuel cell using carbon brush as anode: microbial community analysis and m-cresol degradation mechanism

Anaerobic fluidized bed microbial fuel cell (AFB-MFC) is a technology that combines fluidized bed reactor and microbial fuel cell to treat organic wastewater and generate electricity. The performance and the mechanism of treating m-cresol wastewater in AFB-MFC using carbon brush as biofilm anode were studied. After 48 h of operation, the m-cresol removal efficiency of AFB-MFC, MAR-AFB (fluidized bed bioreactor with acclimated anaerobic sludge), MAR-FB (ordinary fluidized bed reactor with only macroporous adsorptive resin) and AST (traditional anaerobic sludge treatment) were 95.29 ± 0.67%, 85.78 ± 1.81%, 71.24 ± 1.86% and 70.41 ± 0.32% respectively. The maximum output voltage and the maximum power density of AFB-MFC using carbon brush as biofilm anode were 679.7 mV and 166.6 mW/m2 respectively. The results of high-throughput sequencing analysis indicated the relative abundance of dominant electroactive bacteria, such as Trichococcus, Geobacter, and Pseudomonas, on the anode carbon brushes was higher than that of AST, and also identified such superior m-cresol-degrading bacteria as Bdellovibrio, Thermomonas, Hydrogenophaga, etc. Based on the determination of m-cresol metabolites detected by Gas Chromatography-Mass Spectrometry (GC-MS), the possible biodegradation pathway of m-cresol under anaerobic and aerobic conditions in AFB-MFC was speculated. The results showed that m-cresol was decomposed into formic acid-acetic anhydride and 3-methylpropionic acid under the action of electrochemistry, which is a simple degradation pathway without peripheral metabolism in AFB-MFC.

Upcycling of food waste streams to valuable biopigments pyocyanin and 1-hydroxyphenazine

Phenazines, including pyocyanin (PYO) and 1-hydroxyphenazine (1-HP) are extracellular secondary metabolites and multifunctional pigments of Pseudomonas aeruginosa responsible for its blue-green color. These versatile molecules are electrochemically active, involved in significant biological activities giving fitness to the host, but also recognized as antimicrobial and anticancer agents. Their wider application is still limited partly due to the cost of carbon substrate for production, which can be solved by the utilization of carbon from food waste within the biorefinery concept. In this study, a variety of food waste streams (banana peel, potato peel, potato washing, stale bread, yoghurt, processed meat, boiled eggs and mixed canteen waste) was used as sole nutrient source in submerged cultures of P. aeruginosa BK25H. Stale bread was identified as the most suitable substrate to support phenazine biopigments production and bacterial growth. This was further increased in 5-liter fermenter when on average 5.2 mg L-1 of PYO and 4.4 mg L-1 of 1-HP were purified after 24 h batch cultivations from the fermentation medium consisting of homogenized stale bread in tap water. Purified biopigments showed moderate antimicrobial activity, and showed different toxicity profiles, with PYO not being toxic against Caenorhabditis elegans, a free-living soil nematode up to 300 µg mL-1 and 1-HP showing lethal effects at 75 µg mL-1. Therefore, stale bread waste stream with minimal pretreatment should be considered as suitable biorefinery feedstock, as it can support the production of valuable biopigments such as phenazines.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

The two faces of pyocyanin - why and how to steer its production?

The ambiguous nature of pyocyanin was noted quite early after its discovery. This substance is a recognized Pseudomonas aeruginosa virulence factor that causes problems in cystic fibrosis, wound healing, and microbiologically induced corrosion. However, it can also be a potent chemical with potential use in a wide variety of technologies and applications, e.g. green energy production in microbial fuel cells, biocontrol in agriculture, therapy in medicine, or environmental protection. In this mini-review, we shortly describe the properties of pyocyanin, its role in the physiology of Pseudomonas and show the ever-growing interest in it. We also summarize the possible ways of modulating pyocyanin production. We underline different approaches of the researchers that aim either at lowering or increasing pyocyanin production by using different culturing methods, chemical additives, physical factors (e.g. electromagnetic field), or genetic engineering techniques. The review aims to present the ambiguous character of pyocyanin, underline its potential, and signalize the possible further research directions.

Flavin mononucleotide-stimulated microbial fuel cell for efficient gaseous toluene abatement

Chemical park is regarded as a major contributor of VOCs emissions in China. Currently, a green and safe technology, microbial fuel cells (MFCs), is being developed for the VOCs abatement. Noting that effective electron transfer is critical to the MFC performance. In this work, flavin mononucleotide (FMN) was dosed as an electron shuttle to improve the removal of the typical toxic VOCs, toluene. The experimental results revealed that the performance of toluene removal and power generation were accelerated with the dosage of 0.2-2 μM FMN. With the addition of 1 μM FMN, the removal efficiency, the maximum output voltage and the coulombic efficiency of MFC were increased by 18.4%, 64.4% and 56.3%, respectively. However, a further increase in FMN concentration to 2 μM caused a reduction in the removal efficiency and coulombic efficiency. The images of scanning electron microscopy and confocal laser scanning microscopy showed that the presence of FMN greatly promoted the microbial growth and its activity. Furthermore, microbial community analysis also implied that the moderate dosage of FMN (0.2-1 μM) was beneficial for the growth of the typical exoelectrogens, Geobacter sp., and thus the coulombic efficiency was increased. In addition, an electron transfer pathway involving in cytochrome b, OMCs, cytochrome c, and MtrA was proposed based on the cyclic voltammetry analysis. This work will provide a fundamental theoretical support for its application of toxic VOCs abatement from the chemical park.

Exogenous electron transfer mediator enhancing gaseous toluene degradation in a microbial fuel cell: Performance and electron transfer mechanism

Effective electron transfer (ET) between microorganisms and electrodes is essential for the toluene degradation and power generation in a microbial fuel cell (MFC). In this work, the neutral red, with excellent electrochemical reversibility and compatible redox potential as NADH/NAD⁺, was selected as electron mediator to boost the performance of the MFC. Experimental results revealed that, with the 0.5 μM neutral red, the removal efficiency and coulombic efficiency of the gaseous toluene powered MFC was increased by ~19% and ~400%, respectively. However, further increase in neutral red concentration resulted in a decreased in removal efficiency and coulombic efficiency, which was attributed by the toxicity of neutral red to the microbes. The microbial community analysis indicated that, with the dosage of the neutral red, the dominated bacteria shifted from Geobacter to Ignavibacteriales, resulting in a high coulombic efficiency. With the further increase in the neutral red, the amount of Ignavibacteriales gradually decreased and thus the coulombic efficiency declined at a high neutral red concentration. Based on the cyclic voltammetry analysis, an electron transport pathway involving neutral red, cytochromes, and OMCs in neutral red mediated MFC was proposed. Overall, the dosage of neutral not only enhanced the electron transfer but also induced the growth of the exoelectrogens, and thus significantly improve the MFC performance.

Advancement in Benthic Microbial Fuel Cells toward Sustainable Bioremediation and Renewable Energy Production

Anthropogenic activities are largely responsible for the vast amounts of pollutants such as polycyclic aromatic hydrocarbons, cyanides, phenols, metal derivatives, sulphides, and other chemicals in wastewater. The excess benzene, toluene and xylene (BTX) can cause severe toxicity to living organisms in wastewater. A novel approach to mitigate this problem is the benthic microbial fuel cell (BMFC) setup to produce renewable energy and bio-remediate wastewater aromatic hydrocarbons. Several mechanisms of electrogens have been utilized for the bioremediation of BTX through BMFCs. In the future, BMFCs may be significant for chemical and petrochemical industry wastewater treatment. The distinct factors are considered to evaluate the performance of BMFCs, such as pollutant removal efficiency, power density, and current density, which are discussed by using operating parameters such as, pH, temperature and internal resistance. To further upgrade the BMFC technology, this review summarizes prototype electrode materials, the bioremediation of BTX, and their applications.

Colour Me Blue: The History and the Biotechnological Potential of Pyocyanin

Pyocyanin was the first natural phenazine described. The molecule is synthesized by about 95% of the strains of Pseudomonas aeruginosa. From discovery up to now, pyocyanin has been characterised by a very rich and avant-garde history, which includes its use in antimicrobial therapy, even before the discovery of penicillin opened the era of antibiotic therapy, as well as its use in electric current generation. Exhibiting an exuberant blue colour and being easy to obtain, this pigment is the subject of the present review, aiming to narrate its history as well as to unveil its mechanisms and suggest new horizons for applications in different areas of engineering, biology and biotechnology.

Enhancement of gaseous o-xylene degradation in a microbial fuel cell by adding Shewanella oneidensis MR-1

An exoelectrogens, Shewanella oneidensis MR-1 (S. oneidensis MR-1), was supplied to a microbial fuel cell (MFC) to enhance the degradation of a recalcitrant organic compound, o-xylene. The experimental results revealed that, with the addition of the S. oneidensis MR-1, the o-xylene removal efficiency increased by 35-76% compared with the original MFC. The presence of the S. oneidensis MR-1 not only improved the activity of the biofilm in the bioanode but also developed the connections between the bacteria by nanowires. Therefore, the maximum power density increased from 52.1 to 92.5 mW/m³ after the addition of the S. oneidensis MR-1. The microbial community analysis showed that adding the S. oneidensis MR-1 increased the biodiversity in bioanode. The dominant exoelectrogens shifted from Zoogloea sp., Delftia sp., Achromobacter sp., Acinetobacter sp., Chryseobacterium sp., and Stenotrophomonas sp. to Zoogloea sp., Delftia sp., Shewanella sp., Achromobacter sp., Hydrogenophaga sp., Sedimentibacter sp. and Chryseobacterium sp.. Furthermore, the cyclic voltammetry analysis showed that the outer membrane bound protein complex of OmcA-MtrCAB was involved as direct electron transfer pathway in the S. oneidensis MR-1 containing bioanode. We believed that this work is promising to provide optional strategy for efficient VOCs degradation by adjusting the microbial community in the bioanode.

A new strategy for the efficient production of pyocyanin, a versatile pigment, in Pseudomonas aeruginosa OG1 via toluene addition

Pseudomonas aeruginosa produce pyocyanin, which is an extracellular secondary metabolite and multifunctional pigment. In this study, the effects of several surfactants (Tween 20, Tween 80 and Triton X-100) and organic solvents (toluene and chloroform) on pyocyanin production and cell growth were investigated in submerged culture of P. aeruginosa OG1. Organic solvents were found to be more effective in the production of pyocyanin. The maximum production of pyocyanin (33 mg/L) was achieved when 0.2% toluene was added at the stationary growth phase (30 h), corresponding to significant increase of 312% compared with the control (8 mg/L). With the addition of toluene, pyocyanin production was significantly increased, but bacterial biomass reduced. Production of alkaline protease was also affected by toluene addition. It was found that the ratio of saturated/unsaturated fatty acids in the bacterial biomass significantly increased when toluene addition to the medium. This study revealed that with a novel strategy, the addition of toluene to the fermentation medium significantly increased pyocyanin production. These findings suggest that solvent-assisted fermentation strategy can be used in microbial fermentations to increase the production of biotechnological products such as industrially important pigment and enzyme. This study is a first investigation on the stimulation of pyocyanin release in the medium of P. aeruginosa cultures by the addition of toluene.

Effect of hydraulic retention time on electricity generation using a solid plain-graphite plate microbial fuel cell anoxic/oxic process for treating pharmaceutical sewage

Treatment efficiency and electricity generation were evaluated using a solid plain-graphite plate microbial fuel cell (MFC) anoxic/oxic (A/O) process that treated pharmaceutical sewage using different hydraulic retention times (HRT). Short HRTs increased the volumetric organic loading rate, thereby reducing the MFC performance due to rapid depletion of the substrate (carbon/nitrogen source). The COD removal efficiency decreased from 96.28% at a HRT of 8 h to 90.67% at a HRT of 5 h. The removal efficiency of total nitrogen was reduced from 74.16% at a HRT of 8 h to 53.42% at a HRT of 5 h. A shorter HRT decreased the efficiency in treatment of the pharmaceutical products (PPs), which included acetaminophen, ibuprofen and sulfamethoxazole in an aerobic reactor because these antibiotic compounds inhibited the microbial activity of the aerobic activated sludge in the MFC A/O system. The average power density and coulombic efficiency values were 162.74 mW m^-2 and 7.09% at a HRT of 8 h and 29.12 mW m^-2 and 2.23% at a HRT of 5 h, respectively. The dominant bacterial species including Hydrogenophaga spp., Rubrivivax spp. and Leptothrix spp., which seem to be involved in PP biodegradation; these were identified in the MFC A/O system under all HRT conditions for the first time using next generation sequencing. Bacterial nanowires were involved in accelerating the transfer of electrons and served as mediators in the SPGRP biofilm. In conclusion, a SPGRP MFC A/O system at a HRT of 8 h gave better removal of COD, T-N and PPs, as well as generated more electricity.

Electricity production and benzene removal from groundwater using low-cost mini tubular microbial fuel cells in a monitoring well

A low-cost mini tubular microbial fuel cell (MFC) was developed for treating groundwater that contained benzene in monitoring wells. Experimental results indicate that increasing the length and density, and reducing the size of the char particles in the anode effectively reduced the internal resistance. Additionally, a thinner polyvinyl alcohol (PVA) hydrogel separator and PVA with a higher molecular weight improved electricity generation. The optimal parameters for the MFC were an anode density of 1.22 g cm^-3, a coke of 150 μm, an anode length of 6 cm, a PVA of 105,600 g mol^-1, and a separator thickness of 1 cm. Results of continuous-flow experiments reveal that the increasing the sets of MFCs and connecting them in parallel markedly improved the degradation of benzene. More than 95% of benzene was removed and electricity of 38 mW m^-2 was generated. The MFC ran continuously up to 120 days without maintenance.