Partial nitrification using aerobic granule continuous-flow reactor: Operations and microbial community

Impact of low and high temperatures on aerobic granular sludge treatment of industrial wastewater

The goal of this study was to unravel the impact of high and low temperatures (T) on glycogen-accumulating microorganisms (GAOs) which were stimulated in an aerobic granular sludge plant fed with industrial wastewater, which is derived from the cleaning of trucks transporting chocolate and beer. Among GAOs, Candidatus Competibacter (Ca. Competibacter) was the most abundant. The long-term impact on (1) anaerobic dissolved organic carbon (DOC) uptake, (2) sludge morphology, and (3) microbial community composition was investigated. In addition, the short-term impact of T changes on the anaerobic uptake rate was evaluated. High T (above 38 °C) and low T (below 11 °C) had a negative impact on the relative read abundance of Ca. Competibacter and the anaerobic DOC uptake. Nevertheless, the carbon removal efficiency and the settleability of the biomass were not affected. Denitrifiers such as Thauera and Zoogloea were promoted over Ca. Competibacter under high T and low T, respectively, indicating their positive contribution to granulation maintenance.

Current progress of continuous-flow aerobic granular sludge: A critical review

Aerobic granular sludge (AGS) is promising for water resource recovery. Despite the mature granulation strategies in sequencing batch reactor (SBR), the application of AGS-SBR in wastewater treatment is usually costly as it requires extensive infrastructure conversion (e.g., from continuous-flow reactor to SBR). In contrast, continuous-flow AGS (CAGS) that does not require such infrastructure conversion is a more cost-effective strategy to retrofit existing wastewater treatment plants (WWTPs). Formation of aerobic granules in both batch and continuous-flow mode depends on many factors, including selection pressure, feast/famine conditions, extracellular polymeric substances (EPS), and environmental conditions. Compared with AGS in SBR, creating proper conditions to facilitate granulation in continuous-flow mode is challenging. Researchers have been seeking to tackle this bottleneck by studying the impacts of selection pressure, feast/famine conditions, and operating parameters on granulation and granule stability in CAGS. This review paper summarizes the state-of-the-art knowledge regarding CAGS for wastewater treatment. Firstly, we discuss the CAGS granulation process and effective parameters (i.e., selection pressure, feast/famine conditions, hydrodynamic shear force, reactor configuration, the role of EPS, and other operating factors). Then, we evaluate CAGS performance in removing COD, nitrogen, phosphorus, emerging pollutants, and heavy metals from wastewater. Finally, the applicability of the hybrid CAGS systems is presented. At last, we suggest that integrating CAGS with other treatment methods such as membrane bioreactor (MBR) or advanced oxidation processes (AOP) can benefit the performance and stability of granules. However, future research should address unknowns including the relationship between feast/famine ratio and stability of the granules, the effectiveness of applying particle size-based selection pressure, and the CAGS performance at low temperatures.

Formation, application, and storage-reactivation of aerobic granular sludge: A review

It was an important discovery in wastewater treatment that the microorganisms in the traditional activated sludge can form aerobic granular sludge (AGS) by self-aggregation under appropriate water quality and operation conditions. With a typical three-dimensional spherical structure, AGS has high sludge-water separation efficiency, great treatment capacity, and strong tolerance to toxic and harmful substances, so it has been considered to be one of the most promising wastewater treatment technologies. This paper comprehensively reviewed AGS from multiple perspectives over the past two decades, including the culture conditions, granulation mechanisms, metabolic and structural stability, storage, and its diverse applications. Some important issues, such as the reproducibility of culture conditions and the structural and functional stability during application and storage, were also summarized, and the research prospects were put forward. The aggregation behavior of microorganisms in AGS was explained from the perspectives of physiology and ecology of complex populations. The storage of AGS is considered to have large commercial potential value with the increase of large-scale applications. The purpose of this paper is to provide a reference for the systematic and in-depth study on the sludge aerobic granulation process.

New Advances in Aerobic Granular Sludge Technology Using Continuous Flow Reactors: Engineering and Microbiological Aspects

Aerobic granular sludge (AGS) comprises an aggregation of microbial cells in a tridimensional matrix, which is able to remove carbon, nitrogen and phosphorous as well as other pollutants in a single bioreactor under the same operational conditions. During the past decades, the feasibility of implementing AGS in wastewater treatment plants (WWTPs) for treating sewage using fundamentally sequential batch reactors (SBRs) has been studied. However, granular sludge technology using SBRs has several disadvantages. For instance, it can present certain drawbacks for the treatment of high flow rates; furthermore, the quantity of retained biomass is limited by volume exchange. Therefore, the development of continuous flow reactors (CFRs) has come to be regarded as a more competitive option. This is why numerous investigations have been undertaken in recent years in search of different designs of CFR systems that would enable the effective treatment of urban and industrial wastewater, keeping the stability of granular biomass. However, despite these efforts, satisfactory results have yet to be achieved. Consequently, it remains necessary to carry out new technical approaches that would provide more effective and efficient AGS-CFR systems. In particular, it is imperative to develop continuous flow granular systems that can both retain granular biomass and efficiently treat wastewater, obviously with low construction, maintenance and exploitation cost. In this review, we collect the most recent information on different technological approaches aimed at establishing AGS-CFR systems, making possible their upscaling to real plant conditions. We discuss the advantages and disadvantages of these proposals and suggest future trends in the application of aerobic granular systems. Accordingly, we analyze the most significant technical and biological implications of this innovative technology.

Overlooked pathways of denitrification in a sulfur-based denitrification system with organic supplementation

Elemental sulfur-driven autotrophic denitrification (SADN) is a cost-effective approach for treating secondary effluent from wastewater treatment plants (WWTPs). Additional organics are generally supplemented to promote total nitrogen (TN) removal, reduce nitrite accumulation and sulfate production, and balance the pH decrease induced by SADN. However, understanding of the impacts of organic supplementation on microbial communities, nitrogen metabolism, denitrifier activity, and SADN rates in sulfur-based denitrification reactors is still limited. Here, a sulfur-based denitrification reactor was continuously operated for 272 days during which six different C/N ratios were tested successively (2.7, 1.5, 0.7, 0.5, 0.25, and 0). Organic supplementation improved TN removal and decreased NO₂^- accumulation, but reduced the relative abundance of denitrifiers and the contribution of autotrophic nitrate-reducing bacteria (aNRB) to TN removal during the long-term operation of reactor. Predictive functional profiling showed that nitrogen metabolism potential increased with decreasing C/N ratios. SADN was the predominant removal process when the C/N ratio was ≤0.7 (achieving 60% contribution when C/N = 0.7). Although organic supplementation weakened the dominant role of aNRB in denitrification, batch tests for the first time demonstrated that it could accelerate the SADN rate, attributed to the improvement of sulfur bioavailability, likely via the formation of polysulfide. A possible nitrogen removal pathway with multiple electron donors (i.e., sulfur, organics, sulfide, and polysulfide) in a sulfur-based denitrification reactor with organic supplementation was therefore proposed. However, supplementation with a high level of organics could increase the operational cost and effluent concentrations of sulfide and organics as well as enrich heterotrophic denitrifiers. Moreover, microbial community had substantial changes at C/N ratios of >0.5. Accordingly, an optimal C/N ratio of 0.25-0.5 was suggested, which could simultaneously minimize the additional operating cost associated with organic supplementation and maximize TN removal and SADN rates.

The mechanisms of granulation of activated sludge in wastewater treatment, its optimization, and impact on effluent quality

Granular activated sludge has gained increasing interest due to its potential in treating wastewater in a compact and efficient way. It is well-established that activated sludge can form granules under certain environmental conditions such as batch-wise operation with feast-famine feeding, high hydrodynamic shear forces, and short settling time which select for dense microbial aggregates. Aerobic granules with stable structure and functionality have been obtained with a range of different wastewaters seeded with different sources of sludge at different operational conditions, but the microbial communities developed differed substantially. In spite of this, granule instability occurs. In this review, the available literature on the mechanisms involved in granulation and how it affects the effluent quality is assessed with special attention given to the microbial interactions involved. To be able to optimize the process further, more knowledge is needed regarding the influence of microbial communities and their metabolism on granule stability and functionality. Studies performed at conditions similar to full-scale such as fluctuation in organic loading rate, hydrodynamic conditions, temperature, incoming particles, and feed water microorganisms need further investigations.

State of the art of aerobic granulation in continuous flow bioreactors

In the wake of the success of aerobic granulation in sequential batch reactors (SBRs) for treating wastewater, attention is beginning to turn to continuous flow applications. This is a necessary step given the advantages of continuous flow treatment processes and the fact that the majority of full-scale wastewater treatment plants across the world are operated with aeration tanks and clarifiers in a continuous flow mode. As in SBRs, applying a selection pressure, based on differences in either settling velocity or the size of the biomass, is essential for successful granulation in continuous flow reactors (CFRs). CFRs employed for aerobic granulation come in multiple configurations, each with their own means of achieving such a selection pressure. Other factors, such as bioaugmentation and hydraulic shear force, also contribute to aerobic granulation to some extent. Besides the formation of aerobic granules, long-term stability of aerobic granules is also a critical issue to be addressed. Inorganic precipitation, special inocula, and various operational optimization strategies have been used to improve granule long-term structural integrity. Accumulated studies reviewed in this work demonstrate that aerobic granulation in CFRs is capable of removing a wide spectrum of contaminants and achieving properties generally comparable to those in SBRs. Despite the notable research progress made toward successful aerobic granulation in lab-scale CFRs, to the best of our knowledge, there are only three full-scale tests of the technique, two being seeded with anammox-supported aerobic granules and the other with conventional aerobic granules; two other process alternatives are currently in development. Application of settling- or size-based selection pressures and feast/famine conditions are especially difficult to implement to these and similar mainstream systems. Future research efforts needs to be focused on the optimization of the granule-to-floc ratio, enhancement of granule activity, improvement of long-term granule stability, and a better understanding of aerobic granulation mechanisms in CFRs, especially in full-scale applications.

Comparison of the bacterial community composition in the granular and the suspended phase of sequencing batch reactors

Granulation of activated sludge is an increasingly important area within the field of wastewater treatment. Granulation is usually achieved by high hydraulic selection pressure, which results in the wash-out of slow settling particles. The effect of the harsh wash-out conditions on the granular sludge ecosystem is not yet fully understood, but different bacterial groups may be affected to varying degrees. In this study, we used high-throughput amplicon sequencing to follow the community composition in granular sludge reactors for 12 weeks, both in the granular phase and the suspended phase (effluent). The microbiome of the washed out biomass was similar but not identical to the microbiome of the granular biomass. Certain taxa (e.g. Flavobacterium spp. and Bdellovibrio spp.) had significantly (p < 0.05) higher relative abundance in the granules compared to the effluent. Fluorescence in situ hybridization images indicated that these taxa were mainly located in the interior of granules and therefore protected from erosion. Other taxa (e.g. Meganema sp. and Zooglea sp.) had significantly lower relative abundance in the granules compared to the effluent, and appeared to be mainly located on the surface of granules and therefore subject to erosion. Despite being washed out, these taxa were among the most abundant members of the granular sludge communities and were likely growing fast in the reactors. The ratio between relative abundance in the granular biomass and in the effluent did not predict temporal variation of the taxa in the reactors, but it did appear to predict the spatial location of the taxa in the granules.

Rapid formation and pollutant removal ability of aerobic granules in a sequencing batch airlift reactor at low temperature

The start-up of an aerobic granular sludge (AGS) reactor at low temperature was more difficult than at ambient temperature.The rapid formation and characteristics of AGS in a sequencing batch airlift reactor at low temperature were investigated. The nutrient removal ability of the system was also evaluated. It was found that compact granules with clear boundary were formed within 10 days and steady state was achieved within 25 days. The settling properties of sludge were improved with the increasing secretion of extracellular polymeric substances and removal performances of pollutants were enhanced along with granulation. The average removal efficiencies of COD, NH4(+)-N, total nitrogen (TN), total phosphorus (TP) after aerobic granules maturing were over 90.9%, 94.7%, 75.4%, 80.2%, respectively. The rise of temperature had little impact on pollutant biodegradation while the variation of dissolved oxygen caused obvious changes in TN and TP removal rates. COD concentrations of effluents were below 30 mg l(-1) in most cycles of operation with a wide range of organic loading rates (0.6-3.0 kg COD m(-3) d(-1)). The rapid granulation and good performance of pollutant reduction by the system might provide an alternate for wastewater treatment in cold regions.

Microstructural strength deterioration of aerobic granule sludge under organic loading swap

This study revealed that the gross indicators commonly adopted for monitoring the performance of aerobic granular sludge processes are not capable of probing the microstructural deterioration of granule interior upon organic loading swaps. These granules subjected to loading swaps retained their global characteristics: appearances, sizes and settling velocities, chemical oxygen demand (COD) and ammonia-nitrogen removal capacities. However, the granule interior strength, as determined by ultrasound method, was largely weakened upon COD switch-off and was not recovered in the subsequent COD re-supply stage. In response to COD switch-off, the 5.6kDa polysaccharides component of granule extracellular polymeric substances (EPS) was diminished. Correspondingly, two bacterial species, Thauera and Sphingomonas sp., were faded away together with the significant decline in contents of intracellular cyclic dimeric GMP (c-di-GMP). The microstructural integrity of granules was seriously deteriorated upon COD switch-off, which was not detectable by the commonly adopted gross indicators.

Aerobic granular processes: Current research trends

Aerobic granules are large biological aggregates with compact interiors that can be used in efficient wastewater treatment. This mini-review presents new researches on the development of aerobic granular processes, extended treatments for complicated pollutants, granulation mechanisms and enhancements of granule stability in long-term operation or storage, and the reuse of waste biomass as renewable resources. A discussion on the challenges of, and prospects for, the commercialization of aerobic granular process is provided.

Spectroscopic characterization of extracellular polymeric substances from a mixed culture dominated by ammonia-oxidizing bacteria

Extracellular polymeric substances (EPS) of aerobic (AerAOB) and anaerobic ammonium-oxidizing bacteria (AnAOB) are expected to have a significant impact on the performance of autotrophic nitrogen removal in engineered systems. However, there are a few investigations of the EPS of AerAOB and AnAOB, and the results are contradictory. In this study, photometric measurements indicated that the EPS of AerAOB- (31.74 ± 1.48 mg/g-VSS, volatile suspended solids) and AnAOB-enriched cultures (30.12 ± 1.52 mg/g-VSS) contained more polysaccharides than did conventional activated sludge from a municipal wastewater treatment facility (10.76 ± 0.83 mg/g-VSS). In addition, the EPS of the AnAOB-enriched culture was dominated by proteins, leading to a considerably higher protein/polysaccharide ratio (2.64 ± 0.12) than those of the AerAOB-enriched culture (0.56 ± 0.03) and conventional activated sludge (1.96 ± 0.09). Characterization using Fourier transform infrared spectroscopy (FTIR) revealed the dominance of amide bands and/or polysaccharide-associated bands in the EPS of AnAOB and AerAOB. These results corroborate the data from the photometric measurements. In addition, the EPS of AnAOB (23.1% ± 1.2%) and AerAOB (21.9% ± 1.1%) had a higher portion of α-helices, which is the key protein secondary structure that determines flocculation or cell aggregation, in the amide I band than that of activated sludge (16.7% ± 0.8%). X-ray photoelectron spectroscopy (XPS) characterization also revealed significantly different functionalities among the EPS of the three mixed cultures; e.g., O-(C,H), which indicates the presence of polysaccharides, was richer in the EPS of AerAOB, whereas protonated amines, which are commonly found in amino acids and amino sugars, accounted for a large portion of the EPS of AnAOB. The results of this study can potentially expand our knowledge of the microbial aggregates responsible for autotrophic nitrogen removal.