Photocatalytic ozonation of 4-chloro-2-methylphenoxyacetic acid and its reaction intermediate 4-chloro-2-methyl phenol

Advanced oxidation technologies and constructed wetlands in aquaculture farms: What do we know so far about micropollutant removal?

Aquaculture is the fastest growing animal food-producing sector. Water is the central resource for aquaculture, and it is essential that its quality be preserved. Micropollutants (MPs) can reach aquaculture through anthropogenic addition or inlet water, and may cause harmful effects such as endocrine disruption and antibiotic resistance, adversely affecting the fish species being farmed. Furthermore, the discharge of aquaculture effluents into the environment may contribute to the deterioration of water courses. In this sense, the implementation of environmentally responsible measures in aquaculture farms is imperative for the protection of ecosystems and human health. The European Commission (EC) has recently launched a guiding document promoting ecological aquaculture practices; however, options for water treatment are still lacking. Conventional processes are not designed to deal with MPs; this review article consolidates relevant information on the application of advanced oxidation technologies (AOTs) and constructed wetlands (CWs) as potential strategies in this regard. Although 161 studies on the application of AOTs or CWs in aquaculture have already been published, only 34 focused on MPs (28 on AOTs and 6 on CWs), whereas the others reported the removal of contaminants such as bacteria, organic matter, solids and inorganic ions. No study coupling both treatments has been reported to date for the removal of MPs from aquaculture waters. AOTs and CWs are prospective alternatives for the treatment of aquacultural aqueous matrices. However, the type of aquaculture activity and the specifications of these available technologies should be considered while selecting the most suitable treatment option.

A review of ecotoxicity reduction in contaminated waters by heterogeneous photocatalytic ozonation

The widespread deterioration of our water systems requires new wastewater treatment technologies to ensure environmental protection. Conventional wastewater treatments were not designed for, and are therefore ineffective, at removing contaminants of emerging concern (CECs) such as pharmaceuticals, personal care products, pesticides, and industrial chemicals. Furthermore, treatment processes capable of breaking down CECs may produce toxic transformation products more harmful than the parent chemicals. Heterogeneous photocatalytic ozonation provides a promising option with high degradation and mineralization of organic compounds. The aim of the present paper is to review ecotoxicity reduction in water treated by heterogeneous photocatalytic ozonation as a measure of process viability. The discussion investigates changes in toxicity based on a variety of toxicity tests performed to evaluate potential effects on ecosystems, the types of catalysts and radiation sources used, the nature of the target contaminants, and the type of water matrix treated. Acute toxicity testing, TiO₂ catalysts, and mercury-vapour lamps including blacklights were dominant in the reviewed studies, investigated in 86%, 84% and 79% of the papers, respectively. Pharmaceuticals were the main group of chemicals treated and the water matrices used were predominantly pure water and secondary effluent. Overall, the findings of these studies provide evidence that photocatalytic ozonation is an efficient process to remove persistent organic compounds while, most of the time, not increasing the toxicity of the effluent (as reported by 86% of the studies). Due to the wide variation in experimental set-ups, no clear correlation between reaction conditions and toxicity was determined, however, V. fischeri acute toxicity assays and chronic/sublethal tests appeared most sensitive to transformation products. Future studies need to a) incorporate multiple toxicity tests to produce a more reliable and inclusive ecotoxicity assessment of treated effluent and b) investigate immobilized catalysts and energy efficient radiation sources (i.e. solar and LEDs) for industrial applications.

Preparation of alginate-chitosan floating granules loaded with 2-methyl-4-chlorophenoxy acetic acid (MCPA) and their bioactivity on water hyacinth

BACKGROUND

Water hyacinth (Eichhornia crassipes) is considered the most damaging aquatic weed in many countries. Chemical methods are still the primary approach to control, although this directly exposes the natural enemy of water hyacinth (water hyacinth weevil) to herbicides. In addition, spray drift can easily damage non-target plants. In this study, herbicides, natural polymer materials (chitosan and carboxymethyl chitosan), sodium alginate and natural oils (citronella oil) were used to prepare novel floating polysaccharide granules as a solution for controlling water hyacinth.

RESULTS

2-Methyl-4-chlorophenoxy acetic acid (MCPA) floating granules with a spherical structure were prepared using a MCPA-chitosan-sodium alginate-oil cross-linking and embedding method. The granules produced showed the required properties of floatation and slow controlled herbicide release. In addition, the polysaccharide granules collected around water hyacinth plants and enabled targeted release of the active herbicide ingredients onto the stems and roots of the weed, thereby stopping the herbicide from reaching non-target plants and preventing regrowth of water hyacinth.

CONCLUSION

We successfully prepared highly effective MCPA-loaded floating granules, which compared with an MCPA solution, exerted greater control on water hyacinth. Concomitantly, these granules provide a solution to spray drift and ensure the safety of natural enemies of water hyacinth, which is of great significance in research on herbicide formulations.

Synthesis of Cr3+-doped TiO2 nanoparticles: characterization and evaluation of their visible photocatalytic performance and stability

Cr³⁺-doped TiO₂ nanoparticles (Ti-Cr) were synthesized by microwave-assisted sol-gel method. The Ti-Cr catalyst was characterized by X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, N₂ adsorption-desorption analysis, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy (XPS) and zetametry. The anatase mesoporous Ti-Cr material exhibited a specific surface area of 54.5 m²/g. XPS analysis confirmed the proper substitution of Ti⁴⁺ cations by Cr³⁺ cations in the TiO₂ matrix. The particle size was of average size of 17 nm for the undoped TiO₂ but only 9.5 nm for Ti-Cr. The Cr atoms promoted the formation of hydroxyl radicals and modified the surface adsorptive properties of TiO₂ due to the increase in surface acidity of the material. The photocatalytic evaluation demonstrated that the Ti-Cr catalyst completely degraded (4-chloro-2-methylphenoxy) acetic acid under visible light irradiation, while undoped TiO₂ and P25 allowed 45.7% and 31.1%, respectively. The rate of degradation remained 52% after three cycles of catalyst reuse. The higher visible light photocatalytic activity of Ti-Cr was attributed to the beneficial effect of Cr³⁺ ions on the TiO₂ surface creating defects within the TiO₂ crystal lattice, which can act as charge-trapping sites, reducing the electron-hole recombination process.

Promotion of catalytic ozonation of aniline with Mn-Ce-Ox/γ-Al2O3

In this study, Mn-Ce-O_x/γ-Al₂O₃ supported catalysts were adopted to promote the removal efficiency of aniline in simulated wastewater with ozone. Mn-Ce-O_x/γ-Al₂O₃ catalysts were prepared by the impregnation-calcination method. Its phase structure, specific surface area, loading amount and distribution of active units were analyzed by XRD, BET, ICP-AES and TEM/SEM respectively. The characterization results demonstrated that the catalysts had a good dispersion of Mn-Ce-O_x active sites and an abundant porous structure from the γ-Al₂O₃ support. The catalytic ozonation results showed that with Mn₃-Ce₁-O_x/γ-Al₂O₃(1.0), the aniline removal efficiency was highly improved, 15.0% higher than that of ozonation without a catalyst. Furthermore, from the variation in loading amounts of Mn and Ce, it can be seen that the molar ratio of Mn and Ce within the Mn-Ce-O_x plays a key role in accelerating the ozonation of aniline in simulated wastewater with ozone, while Mn:Ce = 1.9:1 showed the best performance. More importantly, the catalysts showed high recycling performance and could be reused at least 12 times without obvious loss of activity.

LuminoTox as a tool to optimize ozone doses for the removal of contaminants and their associated toxicity

New treatment technologies and quality monitoring tools are needed for Contaminants of Emerging Concern (CECs) in wastewater. The purpose of this work was to assess the LuminoTox as a monitoring tool for CEC-associated toxicity in municipal wastewater during ozone treatment, and to evaluate the impact of different ozone feed concentrations at equivalent ozone doses for removing toxicity. The LuminoTox was sensitive at monitoring changes in toxicity of atrazine (ATZ) in synthetic wastewater (SWW) and in a 14 CECs mix in secondary effluent (SE) during ozone treatment. In both experiments, a decrease in toxicity was observed with increasing transferred ozone dose, which corresponded to a decrease in CEC concentration. For ATZ in SWW, a 5 ppm ozone feed showed better toxicity removal, up to 25% and 35% inhibition for LuminoTox algae biosensors SAPS I and SAPS II, respectively, for statistically equivalent ozone dose pairs of 43 mg (5 ppm ozone feed) and 36 mg (15 ppm ozone feed). The opposite was true for the 14 CECs in SE; the 15 ppm ozone feed showed better toxicity removal, up to a reduction of 37% and 40% for SAPS I and SAPS II inhibition, respectively, for statistically equivalent ozone dose pairs of 42 mg (5 ppm ozone feed) and 42 mg (15 ppm ozone feed). Different feed applications had an impact on the efficiency of toxicity removal for equivalent ozone doses; this efficiency appears to depend on the type of contaminants and/or wastewater matrix.

UV and visible activation of Cr(III)-doped TiO2 catalyst prepared by a microwave-assisted sol-gel method during MCPA degradation

Photocatalytic degradation of 4-chloro-2-methylphenoxyacetic acid (MCPA) in aqueous solution using Cr(III)-doped TiO₂ under UV and visible light was investigated. The semiconductor material was synthesized by a microwave-assisted sol-gel method with Cr(III) doping contents of 0.02, 0.04, and 0.06 wt%. The catalyst was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), nitrogen physisorption, UV-Vis diffuse reflectance spectroscopy (DRS), and atomic absorption spectroscopy (AAS). The photocatalytic activity for the photodegradation of MCPA was followed by reversed-phase high-performance liquid chromatography (HPLC) and total organic carbon (TOC) analysis. The intermediates formed during degradation were identified using gas chromatography-mass spectrometry (GC-MS). Chloride ion evolution was measured by ion chromatography. Characterization results showed that Cr(III)-doped TiO₂ materials possessed a small crystalline size, high surface area, and mesoporous structure. UV-Vis DRS showed enhanced absorption in the visible region as a function of the Cr(III) concentration. The Cr(III)-doped TiO₂ catalyst with 0.04 wt% of Cr(III) was more active than bare TiO₂ for the degradation of MCPA under both UV and visible light. The intermediates identified during MCPA degradation were 4-chloro-2-methylphenol (CMP), 2-(4-hydroxy-2-methylphenoxy) acetic acid (HMPA), and 2-hydroxybuta-1,3-diene-1,4-diyl-bis (oxy)dimethanol (HBDM); the formation of these intermediates depended on the radiation source.