Efficient use of Mg-modified zeolite in the treatment of aqueous solution contaminated with heavy metal toxic ions

Aluminosilicates-based nanosorbents for heavy metal removal - A review

Contamination of water bodies with heavy metals poses a significant threat to human health and the environment, requiring the development of effective treatment techniques. In this context, aluminosilicates emerge as promising sorbents due to their cost-effectiveness and natural abundance. This review provides a clear, in-depth, and comprehensive description of the structure, properties, and characteristics of aluminosilicates, supporting their application as adsorbents and highlighting their diversity and adaptability to different matrices and analytes. Furthermore, the functionalization of these materials is thoroughly addressed, detailing the techniques currently used, exposing the advantages and disadvantages of each approach, and establishing comparisons and evaluations of the performances of various functionalized aluminosilicates in the extraction of heavy metals in aqueous matrices. This work aims not only to comprehensively review numerous studies from recent years but also to identify trends in the study of such materials and inspire future research and applications in the field of contaminant removal using aluminosilicates.

Formulation of Novel Composite (Activated Nanoclay/Hydrocolloid of Nostoc sphaericum) and Its Application in the Removal of Heavy Metals from Wastewater

The removal of heavy metals from wastewater is an environmental challenge which demands the use of environmentally friendly materials that promote a circular economy. This study aimed to apply a novel composite of an activated nanoclay/hydrocolloid in the removal of heavy metals from wastewater. A composite blended under pressure was prepared with spray-dried hydrocolloid derived from Nostoc sphaericum algae and activated nanoclay in an acid medium and 1M NaCl. The composite and components were analyzed through infrared (IR), X-ray (XR), ζ potential, cation exchange capacity (CEC), particle size, and SEM images. The composite was subjected to the adsorption of heavy metals (Pb, As, Zn, and Cd) at pH 4.5 and the removal percentage, kinetics, and adsorption isotherms were evaluated. It was observed that the activated nanoclay and the composite that presented a particle size of around 400 nm significantly increased (p-value < 0.05) the CEC, ζ potential, the functional groups, and chelating components, removing heavy metals above 99% for Pb, As 33%, Cd 15%, and Zn 10%. Adsorption kinetics was adjusted to the pseudo second-order model (R2 > 0.98), and the Langmuir and Freundlich models better represented the sorption isotherm at 20 °C. The formulated composite presents a good ability to remove heavy metals in wastewater.

Ultrasonic-assisted synthesis of zeolite/activated carbon@MnO2 composite as a novel adsorbent for treatment of wastewater containing methylene blue and brilliant blue

In this study, zeolite/activated carbon@MnO₂ composite was used as a novel adsorbent to eliminate methylene blue (MB) and brilliant blue (BB) dyes from aqueous media. To this end, activated carbon (AC) was produced by Ziziphus Spina-Christi leaves and then used to synthesize zeolite/AC@MnO₂ composite. Various analyses such as BET, SEM, EDX, Map, FTIR, and XRD were performed to determine the surface features of the above composite. BET analysis indicated that the aforementioned composite has a mesoporous structure. Also, the best conditions for the adsorption of MB and BB dyes were obtained at pH of 9 and 2, temperature of 25 °C, adsorbent dosage of 1 and 2 g/L, initial dye concentration of 10 mg/L, and contact time of 40 and 60 min, respectively. Under optimal conditions, the utmost removal efficiency of MB and BB dyes using the zeolite/AC@MnO₂ composite was 98.43% and 96.54%, respectively, indicating significant adsorption efficiencies. Moreover, the utmost adsorption capacity of MB and BB dyes was 67.56 and 66.22 mg/g, respectively. Furthermore, intraparticle and film diffusion mechanisms were very important in the adsorption process. Besides, thermodynamic and equilibrium studies indicated that the adsorption process is exothermic, physical, and spontaneous. Generally, the aforementioned composite has a significant adsorption capacity and can be a suitable adsorbent to eliminate cationic dyes from industrial effluents.

Applications of Nano-Zeolite in Wastewater Treatment: An Overview

Nano-zeolite is an innovative class of materials that received recognition for its potential use in water and tertiary wastewater treatment. These applications include ion-exchange/sorption, photo-degradation, and membrane separation. The aim of this work is to summarize and analyze the current knowledge about the utilization of nano-zeolite in these applications, identify the gaps in this field, and highlight the challenges that face the wide scale applications of these materials. Within this context, an introduction to water quality, water and wastewater treatment, utilization of zeolite in contaminant removal from water was addressed and linked to its structure and the advances in zeolite preparation techniques were overviewed. To have insights into the trends of the scientific interest in this field, an in-depth analysis of the variation in annual research distribution over the last decade was performed for each application. This analysis covered the research that addressed the potential use of both zeolites and nano-zeolites. For each application, the characterization, experimental testing schemes, and theoretical analysis methodologies were overviewed. The results of the most advanced research were collected, summarized, and analyzed to allow an easy visualization and comparison of these research results. Finally, the gaps and challenges that face these applications are concluded.

Adsorption and Release Characteristics of Purified and Non-Purified Clinoptilolite Tuffs towards Health-Relevant Heavy Metals

The occurrence of health-relevant contaminants in water has become a severe global problem. For treating heavy-metal-polluted water, the use of zeolite materials has been extended over the last decades, due to their excellent features of high ion exchange capacity and absorbency. The aim of this study was to assess the effect of heavy metal uptake of one purified (PCT) and two non-purified clinoptilolite tuffs (NPCT1 and NPCT2) in aqueous solutions on monovalent ions Ni+, Cd+, Cs+, Ba+, Tl+, and Pb+. Experiments were furthermore carried out in artificial gastric and intestinal fluids to mimic human digestion and compare removal efficiencies of the adsorbent materials as well as release characteristics in synthetic gastric (SGF) and intestinal fluids (SIF). Batch experiments show low sorption capacities for Ni+ and Cd+ for all studied materials; highest affinities were found for Ba+ (99–100%), Pb+ (98–100%), Cs+ (97–98%), and Tl+ (96%), depending on the experimental setup for the PCT. For the adsorption experiments with SGF, highest adsorption was observed for the PCT for Pb+, with an uptake of 99% of the lead content. During artificial digestion, it was proven that the PCT did not release Ba+ cations into solution, whereas 13,574 ng·g−1 and 4839 ng·g−1 of Ba+ were measured in the solutions with NPCT1 and NPCT2, respectively. It was demonstrated that the purified clinoptilolite tuff is most effective in remediating heavy-metal-polluted water, particularly during artificial digestion (99% of Pb+, 95% of Tl+, 93% of Ba+). In addition, it was shown that the released amount of bound heavy metal ions (e.g., barium) from the non-purified clinoptilolite tuffs into the intestinal fluids was significantly higher compared to the purified product.

Emerging novel polymeric adsorbents for removing dyes from wastewater: A comprehensive review and comparison with other adsorbents

Dye molecules are one of the most hazardous compounds for human and animal health and the excess intake of these materials can create toxic impacts. Several studies show the practicality of the adsorption process for dye uptake from wastewaters. In recent years, various adsorbents were used to be efficient in this process. Among all, polymeric adsorbents demonstrate great applicability in different environmental conditions and attract many researchers to work on them, although there is not enough reliable and precise information regarding these adsorbents. This study aims to investigate some influential parameters such as their type, physical properties, experimental conditions, their capacity, and further modeling along with a comparison with non-polymeric adsorbents. The influence of the main factors of adsorption capacity was studied and the dominant mechanism is explained extensively.

Combined Influence of Low-Grade Metakaolins and Natural Zeolite on Compressive Strength and Heavy Metal Adsorption of Geopolymers

Metakaolins (MKs) prepared from low-grade kaolins located in the Alvarães (A) and Barqueiros (B) regions of Portugal were used as the aluminosilicate source to compare their effect on the compressive strength and heavy metal adsorption of geopolymers. Natural zeolite, an inexpensive, efficient adsorbent, was used as an additive in formulations to enhance geopolymers’ adsorption capacities and reduce MK utilization’s environmental footprint. Geopolymers were synthesized with the replacement of MK by zeolite up to 75 wt.% (A25, B25—25% MK 75% zeolite; A50, B50—50% MK 50% zeolite; A75, B75—75% MK 25% zeolite; A100, B100—100% MK). The molar ratios of SiO2/Al2O3 and Na2O/Al2O3 were kept at 1 to reduce the sodium silicate and sodium hydroxide environmental impact. Geopolymers’ crystallography was identified using X-ray diffraction analysis. The surface morphology was observed by scanning electron microscopy to understand the effect of zeolite incorporation. Chemical analysis using X-ray fluorescence spectroscopy and energy dispersive X-ray spectroscopy yielded information about the geopolymers’ Si/Al ratio. Compressive strength values of geopolymers obtained after 1, 14, and 28 days of curing indicate high strengths of geopolymers with 100% MK (A100—15.4 MPa; B100—32.46 MPa). Therefore, zeolite did not aid in the improvement of the compressive strength of both MK-based geopolymers. The heavy metal (Cd2+, Cr3+, Cu2+, Pb2+, and Zn2+) adsorption tests exhibit relatively higher adsorption capacities of Barqueiros MK-based geopolymers for all the heavy metals except Cd2+. Moreover, zeolite positively influenced divalent cations’ adsorption on the geopolymers produced from Barqueiros MK as B75 exhibits the highest adsorption capacities, but such an influence is not observed for Alvarães MK-based geopolymers. The general trend of adsorption of the heavy metals of both MK-based geopolymers is Pb2+ > Cd2+ > Cu2+ > Zn2+ > Cr3+ when fitted by the Langmuir isotherm adsorption model. The MK and zeolite characteristics influence geopolymers’ structure, strength, and adsorption capacities.

Structural design and environmental applications of electrospun nanofibers

Nanofibers have attracted extensive attention and been applied in various fields due to their high aspect ratio, high specific surface area, flexibility, structural abundance, etc. The electrospinning method is one of the most promising and effective ways to produce nanofibers. The electrospun nanofibers-based films and membranes have already been demonstrated to possess small pore sizes, larges specific surface area, and can be grafted with different functionalities to adapt to various purposes. The environmental applications of nanofibers are one of the essential application fields, and great achievements have been made in this field. To well summarize the development of nanofibers and their environmental applications, we review the nanofiber fabrication methods, advanced fiber structures, and their applications in the field of air filtration, heavy metal removal, and self-cleaning surface. We hope this review and summary can provide readers a comprehensive understanding of the structural design and environmental applications of electrospun nanofibers.

Adsorption of cadmium using modified zeolite-supported nanoscale zero-valent iron composites as a reactive material for PRBs

The main challenge in utilizing permeable reactive barriers (PRB) for remediation of metals-contaminated groundwater is determination of a proper low-cost reactive medium that can remove the desired contaminants simultaneously. In this study, the performance of different zeolite materials and nZVI-based adsorbents for cadmium (Cd) removal was compared. Further, a composite of the best nZVI and zeolite samples was synthesized with the removal efficiency of 20.6 g/kg and selected as the proposed adsorbent. Moreover, the characteristics of the composite were analyzed through different techniques (BET, XRF, XRD, FT-IR, FE-SEM and EDX). In addition, through kinetic and thermodynamic studies, the effect of temperature, pH, ionic strength and presence of other metal ions on Cd removal efficiency was investigated. According to the results, since sodium zeolite (NaZ) provides a large number of specific ion-exchange sites for decoration with nZVI, stabilizes nZVI, and prevents its aggregation and further leaching in the harsh environment, the NaZ-nZVI composite is capable of removing Cd by adsorption and is applicable in PRBs, and thus it seems that the aforementioned composite is a proper candidate for groundwater remediation from a wide range of metal ions.

Assessment of the adsorption kinetics, equilibrium, and thermodynamic for Pb(II) removal using a low-cost hybrid biowaste adsorbent, eggshell/coffee ground/sericite

A hybrid adsorbent (CES), coffee grounds, eggshell powder and sericite as a binder, was prepared to remove Pb(II) from aqueous solution. The Fourier-transform infrared spectroscopy analysis showed that the CES contained a large amount of OH groups and had a favorable structure for adsorbing heavy metals. The value of pH_pzc of CES was estimated at 7.08. In the neutral pH region, the surface of CES is negatively charged and favorable for adsorption of Pb(II). The maximum Langmuir adsorption amount was 155.67 mg/g, and the adsorption process of Pb(II) using CES fitted pseudo-second-order kinetic model and Langmuir isotherm model. Moreover, the analysis of adsorption energy, free energy, enthalpy, and entropy found that the adsorption of Pb(II) onto CES was physical and a spontaneous exothermic reaction. CES is a hybrid adsorbent using general municipal waste and has great advantages in terms of environmental conservation and sustainable environmental circulation. This allows it to compete with other adsorbents. PRACTITIONER POINTS: A hybrid adsorbent, coffee grounds, eggshell, and sericite (CES), was used to remove Pb(II) Adsorption of Pb(II) using CES in an aqueous solution was physical rather than chemical CES contained a large amount of OH groups and had a favorable structure for adsorbing heavy metals The reactivity and strength of the adsorption of Pb(II) onto CES was very good CES has great advantages in terms of environmental conservation and sustainable environmental circulation.

Assessment of heavy metal pollution from anthropogenic activities and remediation strategies: A review

Heavy metal pollution is a nefarious issue with implications for life. Heavy metals are natural occurring elements, having both natural and anthropogenic sources. The latter are however the most significant, releasing greater amounts of these pollutants in more toxic and mobile forms. Their chemistry and dynamics in the ecosystems are presented, and the relation to the pollution problematic thereof is discussed. The concentration of heavy metals in several sites, assessed in water, soil and sediment samples, affected by different pollution sources are reviewed. These evidence how human activities impact natural media and how the pollution spreads. The pollution in each media is assessed by the concentration relative to drinking and irrigation water guidelines, and by the geoaccumulation index of soils and sediments. It is found that ore extraction and processing and metallurgical industries stand atop the most polluting sources. Given the dynamics of heavy metal cations and that, most of these are released in liquid effluents, wastewater treatment techniques for the removal of heavy metals are also surveyed and critically discussed. Economic viability at a large municipal scale and the ability to comply with strict regulations are the determining factors in the selection of these techniques. A critical discussion on the viability of such techniques is made, reviewing some literature studies and commenting on their applicability on the previously found polluted media.

Calcined Umbonium vestiarium snail shell as an efficient adsorbent for treatment of wastewater containing Co (II)

In the present study, the Umbonium vestiarium snail shell (UVS) was used as an abundant and low-cost resource for the removal of Co (II) from aqueous solution. The characteristics of calcined Umbonium vestiarium snail shell (CUVS) were analyzed using FTIR, SEM, MAP, EDAX, and BET analyses. The results showed that the specific surface area of the CUVS was obtained 17.02 m2/g which was an acceptable amount. The presence of Co (II) in the adsorbent structure was confirmed by EDAX, and Map analyses after Co (II) adsorption showed that the adsorbent successfully adsorbed Co (II) from aqueous solution. The effect of different parameters such as, contact time, initial concentration of cobalt ion, the adsorbent dose, and pH value was also investigated. The maximum efficiency of cobalt ion adsorption was measured 93.87% at a pH value of 6, contact time of 80 min, the adsorbent dose of 3 g/L, and initial ion concentration of 10 mg/L. Also, Langmuir, Freundlich, and D-R isotherm models were used to determine the most appropriate isotherm model for cobalt ion adsorption. The adsorption equilibrium data were better fitted with the Langmuir model with a maximum adsorption capacity of 93.46 mg/g. Additionally, the average free energy of adsorption was evaluated in the amount of 1.4085 KJ/mol, revealing a physical adsorption. Moreover, the kinetic behavior study showed that the experimental data follow the pseudo second order kinetic model to the value of correlation coefficient.

Development of a new method for biomonitoring of multiple metals in occupational exposure

The assessment of co-exposure to several types of metal contamination poses a hurdle for occupational monitoring. Determination of elements in biological samples is an important way to evaluate occupational exposure. However, optimized methods for the extraction of multiple metals from biological samples have not been reported in recent studies. Therefore, solid-phase extraction (SPE) based on the functionalized nano-zeolite Y was suggested for the biomonitoring of metal co-exposure. SPE was conducted with ammonium pyrrolidine dithiocarbamate (APDC) surrounded by Triton X-100 micelles, which were loaded into the pores of nano-zeolite Y. In this study, SPE was optimized for pre-concentration of trace amounts of chromium (Cr), cadmium (Cd), and lead (Pb) in urine samples with respect to the pH, APDC concentration, elution condition, amount of functionalized nano-zeolite Y, and sample volume. This method has been successfully optimized for the extraction of the mentioned multiple metals with >97% efficiency and an acceptable reproducibility with a coefficient variation of <10%. This method could be used in the extraction of multiple metals in environmental and occupational exposure conditions. In this study, urine samples of welding workers were evaluated following this optimized method.

Air pollution control and flue gas desulfurization residues from Polish copper smelting facility as adsorbents of Pb(II) and Cu(II) from aqueous solutions

This study aimed at evaluation of air pollution control residues (APCR) and flue gas desulfurization residues (FGDR) from copper foundry in Southwestern Poland as adsorbents of Cu(II) and Pb(II) from simulated wastewater. Studies of the impact of pH and adsorbent dose, as well as sorption isotherms, and kinetic and thermodynamic studies were conducted in a series of batch experiments. The maximum adsorption capacities were equal to 42.9 mg g^-1 Cu(II) and 124.4 mg g^-1 Pb(II) for APCR and 98.8 mg g^-1 Cu(II) and 124.7 mg g^-1 Pb(II) for FGDR, which was comparable to mineral adsorbents examined in other studies. Adsorption isotherms followed the Langmuir model, except for Pb(II) for FGDR, which followed Freundlich model. Sorption kinetics for both materials was properly expressed by pseudo-second-order equation. Mean adsorption energy parameter suggested that the adsorption might have occurred via physical bonding. Thermodynamic study revealed that adsorption was spontaneous and endothermic for Cu(II) and not spontaneous and exothermic for Pb(II), with lower temperature favoring the process. The results suggested that both materials had high affinity towards Cu(II) and Pb(II) ions and could be conducted industrial scale research for consideration as potential adsorbents from aqueous solutions.

Application of hybrid bead, persimmon leaf and chitosan for the treatment of aqueous solution contaminated with toxic heavy metal ions

In this study, hybrid beads, which are made by mixing persimmon leaf and chitosan, was used to remove Pb(II) and Cd(II) from aqueous solution. According to the Fourier transform infrared spectrometry (FT-IR) analysis, the hybrid bead has a structure that enables the easy adsorption of heavy metals because it has carboxylic, carbonyl groups, O-H carboxylic acid, and bonded -OH groups. The adsorption of Pb(II) and Cd(II) by hybrid beads was more suitable with the Langmuir isothermal adsorption and showed an ion exchange reaction which occurred in the uneven adsorption surface layer. The maximum adsorption capacity of Pb(II) and Cd(II) was determined to be 278.68 mg/g and 87.91 mg/g, respectively. Furthermore, the adsorption removal process of Pb(II) and Cd(II) using hybrid beads is a spontaneous exothermic reaction and the affinity of the adsorbed material for the adsorbent is excellent. Hybrid beads are inexpensive, have a high removal efficiency of heavy metals, and are environmentally friendly.

Adsorbing low concentrations of Cr(VI) onto CeO2@ZSM-5 and the adsorption kinetics, isotherms and thermodynamics

The CeO₂@ZSM-5 was prepared by the dipping method. We used ZSM-5 and CeO₂ as the carrier and load components, respectively. The aim was to reduce the low concentration of Cr(VI) in simulated wastewater (the concentration of Cr(VI) ranged from 0.2 to 1 mg/L). The characteristics of ZSM-5 and CeO₂@ZSM-5 samples were determined by X-ray powder diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET). Characterization results showed that the particle size, BET surface area and pore volume for CeO₂@ZSM-5 was around 0.783 nm, 421.307 m²/g and 0.313 m³/g, respectively. In addition, the optimum conditions were obtained by the orthogonal test, and the details were as follows: optimal pH, adsorbent dose, initial concentration of Cr(VI) and equilibrium time were 3, 5 g/L, 0.6 mg/L and 70 min respectively. The removal of Cr(VI) was 99.56% in these conditions. The pseudo-second-order model best described the adsorption kinetics of Cr(VI) onto CeO₂@ZSM-5. Isotherm data were treated according to Langmuir, Freundlich and Temkin isotherm models. The results showed that the Freundlich adsorption isotherm model fitted best in the temperature range studied. Adsorption capacity increased with temperature, showing the endothermic nature of Cr(VI) adsorption. The desorption results showed the best recovery of Cr(VI) using 0.1 M HCl.

Persimmon leaf bio-waste for adsorptive removal of heavy metals from aqueous solution

The aim of this study was to investigate heavy metal removal using waste biomass adsorbent, persimmon leaves, in an aqueous solution. Persimmon leaves, which are biomaterials, have a large number of hydroxyl groups and are highly suitable for removal of heavy metals. Therefore, in this study, we investigated the possibility of removal of Cu, Pb, and Cd in aqueous solution by using raw persimmon leaves (RPL) and dried persimmon leaves (DPL). Removal of heavy metals by RPL and DPL showed that DPL had a 10%-15% higher removal than RPL, and the order of removal efficiency was found to be Pb > Cu > Cd. The pseudo-second order model was a better fit to the heavy metal adsorption experiments using RPL and DPL than the pseudo-first order model. The adsorption of Cu, Pb, and Cd by DPL was more suitable with the Freundlich isothermal adsorption and showed an ion exchange reaction which occurred in the uneven adsorption surface layer. The maximum adsorption capacity of Cu, Pb, and Cd was determined to be 19.42 mg/g, 22.59 mg/g, and 18.26 mg/g, respectively. The result of the adsorption experiments showed that the n value was higher than 2 regardless of the dose, indicating that the heavy metal adsorption on DPL was easy. In the thermodynamic experiment, ΔG° was a negative value, and ΔH° and ΔS° were positive values. It can be seen that the heavy metal adsorption process using DPL was spontaneous in nature and was an endothermic process. Moreover, as the temperature increased, the adsorption increased, and the affinity of heavy metal adsorption to DPL was very good. This experiment, in which heavy metals are removed using the waste biomass of persimmon leaves is an eco-friendly new bioadsorbent method because it can remove heavy metals without using chemicals while utilizing waste recycling.

Adsorption of heavy metals on conventional and nanostructured materials for wastewater treatment purposes: A review

The problem of water pollution is of a great concern. Adsorption is one of the most efficient techniques for removing noxious heavy metals from the solvent phase. This paper presents a detailed information and review on the adsorption of noxious heavy metal ions from wastewater effluents using various adsorbents - i.e., conventional (activated carbons, zeolites, clays, biosorbents, and industrial by-products) and nanostructured (fullerenes, carbon nanotubes, graphenes). In addition to this, the efficiency of developed materials for adsorption of the heavy metals is discussed in detail along with the comparison of their maximum adsorption capacity in tabular form. A special focus is made on the perspectives of further wider applications of nanostructured adsorbents (especially, carbon nanotubes and graphenes) in wastewater treatment.