Preparation of surface anion imprinted polymer by developing a La(III)-coordinated 3-methacryloxyethyl-propyl bi-functionalized graphene oxide for phosphate removal

Cost estimation of synthesis and utilization of nano-adsorbents on the laboratory and industrial scales: A detailed review

The recent regulations pertaining to the circular economy have unlocked new prospects for researchers. In contrast to the unsustainable models associated with the linear economy, integration of concepts of circular economy braces reducing, reusing, and recycling of waste materials into high-end products. In this regard, adsorption is a promising and cost-effective water treatment technology for handling conventional and emerging pollutants. Numerous studies are published annually to investigate the technical performance of nano-adsorbents and nanocomposites in terms of adsorption capacity and kinetics. Yet, economic performance evaluation is rarely discussed in the literature. Even if an adsorbent shows high removal efficiency towards a specific pollutant, its high preparation and/or utilization costs might hinder its real-life use. This tutorial review aims at illustrating cost estimation methods for the synthesis and utilization of conventional and nano-adsorbents. The current treatise discusses the synthesis of adsorbents on a laboratory scale where the raw material, transportation, chemical, energy, and any other costs are discussed. Moreover, equations for estimating the costs at the large-scale adsorption units for wastewater treatment are illustrated. This review focuses on introducing these topics to non-specialized readers in a detailed but simplified manner.

Phosphate removal by a La(OH)3 loaded magnetic MAPTAC-based cationic hydrogel: Enhanced surface charge density and Donnan membrane effect

Cationic hydrogels have received great attention to control eutrophication and recycle phosphate. In this study, a type of La(OH)₃ loaded magnetic MAPTAC-based cationic hydrogel (La(OH)₃@MMCH) was developed as a potential adsorbent for enhanced phosphate removal from aqueous environment. La(OH)₃@MMCH exhibited high adsorption capacity of 105.72±5.99 mg P/g, and reached equilibrium within 2 hr. La(OH)₃@MMCH could perform effectively in a wide pH range from 3.0 to 9.0 and in the presence of coexisting ions (including SO₄^2-, Cl^-, NO₃^-, HCO₃^-, SiO₄^4- and HA). The adsorption-desorption experiment indicated that La(OH)₃@MMCH could be easily regenerated by using NaOH-NaCl as the desorption agent, and 73.3% adsorption capacity remained after five cycles. Moreover, La(OH)₃@MMCH was employed to treat surface water with phosphate concentration of 1.90  mg/L and showed great removal efficiency of 95.21%. Actually, MMCH showed high surface charge density of 34.38-59.38 meq/kg in the pH range from 3.0 to 11.0 and great swelling ratio of 3014.57% within 24 h, indicating that MMCH could produce the enhanced Donnan membrane effect to pre-permeate phosphate. Furthermore, the bifunctional structure of La(OH)₃@MMCH enabled it to capture phosphate through electrostatic attraction and ligand exchange. All the results prove that La(OH)₃@MMCH is a promising adsorbent for eutrophication control and phosphate recovery.

Carbonaceous materials for removal and recovery of phosphate species: Limitations, successes and future improvement

The carbonaceous materials have gained significant interest for the phosphorus species remediation and recovery in the last decade. Carbonaceous materials present many unique features, such as cost effective, availability, environmentally friendly, and high removal efficiency that make them a promising adsorbent. In this review, the recent application of carbonaceous materials including activated carbon (AC), graphene and graphene oxide (GO), lignin, carbon nanotubes (CNTs), and gC₃N₄ for phosphate removal and recovery were comprehensively summarized. The kinetics and isotherm models, removal mechanisms, and effects of operating parameters are reported. The reusability, lifetime of carbonaceous materials, and impact of modification were also considered. The modified carbonaceous materials have significantly high phosphate adsorption capacity compared to unmodified adsorbents. Namely, MgO-functionalized lignin-based bio-charcoal exhibited a 906.8 mg g^-1 of capacity as the highest one among other reviewed materials. The modification of carbonaceous materials with various elements has been presented to improve the surface functional groups, surface area and charge, and pore volume and size. Among these loaded elements, iron has been effectively used to provide a prospect for magnetic recovery of the adsorbent as well as increase phosphate adsorption. Furthermore, the phosphate recovery methods, phosphate removal efficiency of carbonaceous materials, the limitations, important gaps in the literature, and future studies to enhance applicability of carbonaceous materials in real scale are also discussed.

A comprehensive review on preparation, functionalization and recent applications of nanofiber membranes in wastewater treatment

The direct discharge of significant amounts of polluted water into water bodies causes adverse ecological and human health effects. This severe deterioration in water quality creates significant challenges to meet the growing demand for clean water. Therefore, the world urgently needs environmentally friendly advanced technology to overcome this global crisis. In this regard, nanofiber-based membrane filtration is a promising technique in wastewater remediation because of their huge surface area, extremely porous structure, amenable pore size/pore size distribution, variety of material choices, and flexibility to modification with other functional materials. However, despite their unique properties, fouling, poor mechanical properties, shrinkage, and deformation are major drawbacks of nanofiber membranes for treating wastewater. This review presents a comprehensive overview of nanofiber membranes' fabrication and function in water purification applications as well as providing novel approaches to overcoming/alleviating the mentioned disadvantages. The review first presents nanofiber membrane preparation methods, focusing on electrospinning as a versatile and viable technique alongside discussing the parameters controlling nanofiber morphology. Afterward, the functionalization of nanofiber membranes by combining them with other nanomaterials, such as metal and metal-oxide nanoparticles, carbon nanotubes, metal-organic frameworks, and biomolecules, were demonstrated and discussed. In addition, nanofiber membranes functionalized with microorganisms were highlighted. Finally, we introduced and discussed in detail the most relevant and recent advances in nanofiber applications in wastewater treatment in the context of removing different pollutants (e.g., heavy metals, nutrients, radioactive elements, pharmaceuticals, and personal care products, dyes, and pesticides). Moreover, the promising antimicrobial ability of nanofiber membranes in removing microorganisms from wastewater has been fully underscored. We believe this comprehensive review could provide researchers with preliminary data and guide both researchers and producers engaged in the nanofiber membrane industry, letting them focus on the research gaps in wastewater treatment.

Graphene-Based Composites for Phosphate Removal

A variety of methods, including chemical precipitation, biological phosphorus elimination, and adsorption, have been described to effectively eliminate phosphorus (P) in the form of phosphate (PO₄ ^3-) from wastewater sources. Adsorption is a simple and easy method. It shows excellent removal performance, cost effectiveness, and the substantial option of adsorbent materials. Therefore, it has been recognized as a practical, environmentally friendly, and reliable treatment method for eliminating P. Nanocomposites have been deployed to remove P from wastewater via adsorption. Nanocomposites offer low-temperature alteration, high specific surface area, adjustable surface chemistry, pore size, many adsorption sites, and rapid intraparticle diffusion distances. In this Mini-Review, we have aimed to summarize the last eight years of progress in P removal using graphene-based composites via adsorption. Ultimately, future perspectives have been presented to boost the progress of this encouraging field.

Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption. Two types of adsorbent materials, the zirconium hydroxides embedded in pomegranate peel (Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel (Zr-La/Peel) were developed. Scanning electronic microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) were evaluated to give insight into the physicochemical properties of these adsorbents. Zr-La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level. The peel as a host can strive to have a strong "shielding effect" to increase the steadiness of the entrenched Zr and La elements. La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction, which contribute to protonation and electrostatic attraction. The highest adsorption capacity of La-Zr/Peel for phosphate was calculated to be 40.21 mg/g, and pseudo second-order equation is very well fitted for kinetic adsorption. Phosphate adsorption efficiency was reduced by an increase of pH. With the background of coexisting Cl^-, little effect on adsorption efficiency was observed, while adsorption capacities were reduced by almost 20-30% with the coexistence of [Formula: see text] , [Formula: see text] and humic acid (HA).

PVA/PEI crosslinked electrospun nanofibers with embedded La(OH)3 nanorod for selective adsorption of high flux low concentration phosphorus

Phosphorus (P) is a limiting element causing eutrophication, and thus, its removal has elicited significant attention in recent years. In this study, a La(OH)₃ embedded nanorod loaded PVA/PEI crosslinked nanofiber membrane (LNPPM) was synthesized for phosphorus removal at a low concentration and under high flux conditions. Comparative tests demonstrated that an LNPPM exhibited a high phosphate adsorption capacity (165.9 mg P/g La) and performed well even under interference with the pH and coexisting ions (Cl^-, SO₄^2-, NO₃^-, and F^-). Through a continuous adsorption test, LNPPM also showed a fast adsorption efficiency with a 73.7% capacity used for C/C₀ = 0.5 under a low concentration and high flux phosphate solution. Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, SEM-EDS, and high-resolution transmission electron microscopy analyses indicated that the La(OH)₃ nanorod intensively and uniformly embedded into the nanofibers, providing an ideal condition for phosphate adsorption. A mechanistic analysis showed that the ligand exchange played a vital role in the phosphate adsorption of LNPPM. A cost index (capacity/synthesis cost) comparison with typical super phosphate adsorbents also indicated that LNPPM (795 mg P/USD) could be a viable option owing to its simple synthesis procedure, low synthesis cost, and considerable capacity. This technique shows promise for use in most dephosphorization applications.

Selective Phosphate Removal from Water and Wastewater using Sorption: Process Fundamentals and Removal Mechanisms

Eutrophication of water bodies is a serious and widespread environmental problem. Achieving low levels of phosphate concentration to prevent eutrophication is one of the important goals of the wastewater engineering and surface water management. Meeting the increasingly stringent standards is feasible in using a phosphate-selective sorption system. This critical review discusses the most fundamental aspects of selective phosphate removal processes and highlights gains from the latest developments of phosphate-selective sorbents. Selective sorption of phosphate over other competing anions can be achieved based on their differences in acid-base properties, geometric shapes, and metal complexing abilities. Correspondingly, interaction mechanisms between the phosphate and sorbent are categorized as hydrogen bonding, shape complementarity, and inner-sphere complexation, and their representative sorbents are organic-functionalized materials, molecularly imprinted polymers, and metal-based materials, respectively. Dominating factors affecting the phosphate sorption performance of these sorbents are critically examined, along with a discussion of some overlooked facts regarding the development of high-performance sorbents for selective phosphate removal from water and wastewater.

Synthesis and application of ion-imprinted polymer for the determination of mercury II in water samples

In this study, an innovative analytical methodology capable of selectively identifying and quantifying mercury contamination by the association of solid-phase extraction using ion-imprinted polymers as a sorbent phase and differential pulse anodic stripping voltammetry is proposed. To this end, the ion-imprinted polymers were synthesized and characterized by infrared spectroscopy and atomic force microscopy. The sorption capacities and the selectivity of the ion-imprinted polymers were compared to the ones related to the non-imprinted ones. Next, the experimental parameters of this solid-phase extraction method (IIP-SPE) were evaluated univariately. The selectivity of this polymeric matrix against other cations (Cd II, Pb II, and Cu II) was also evaluated. Limits of detection (LOD) and quantification (LOQ) obtained for the here proposed methodology were 0.322 μg L^-1 and 1.08 μg L^-1, respectively. Also, the precision of 4.0% was achieved. The method was finally applied to three water samples from different sources: for the Piratininga and Itaipu Lagoon waters, Hg II concentrations were below the LOQ and for Vargem River waters a concentration equal to 1.35 ± 0.07 mg L^-1 was determined. These results were confirmed by recovery tests, resulting in a recovery of 96.2 ± 4.0%, and by comparison with flame atomic absorption spectrometry, resulting in statistical conformity between the two methods at 95% confidence level.

Insights into the phosphate adsorption behavior onto 3D self-assembled cellulose/graphene hybrid nanomaterials embedded with bimetallic hydroxides

3D self-assembled cellulose/graphene hybrids (3D cell/GO hybrids) were used as the host for encapsulating the Zr and La hydroxides, forming the Zr/La-cell/GO hybrids. After phosphate adsorption, the crystallization peaks of LaPO₄·xH₂O in saturated Zr/La-cell/GO hybrids were observed and they were reduced with the increase in pHs. Especially, a low crystallization was observed at pH 10.0 as compared with those at pH 3.0 and 6.0; this also corresponded well to the varied adsorption capacity as a function of pHs. The increased humic acid (HA) amounts (150 mg/L) only resulted in a low capacity loss (16.3%) in phosphate uptake from 25.3 to 21.2 mg/g. A noticeable La leach (2.1 mg/L) was observed at the HA level of 150 mg/L but no Zr leach was detected, and therefore, complexation of La with HA seemed a potential explanation for the increased La leaching. The interference of different coexisting anions on phosphate uptake followed the order as F^- > SiO₃^2- > HCO₃^- > SO₄^2- > NO₃^- > Cl^-. Phosphate uptake by Zr/La-cell/GO hybrids was significantly reduced at the co-existing fluoride partially due to the stronger electro-negativity of fluoride to combine with the protonated Zr/La hydroxides. In addition, Ca²⁺ laden on the Zr/La-cell/GO hybrids significantly enhanced the adsorption of phosphate by Zr/La-cell/GG hybrids due to the formation of calcium phosphate precipitation in framework of Zr/La-cell/GG hybrids.