In-situ immobilization and pyrolysis of metal-organic framework supported on biomorphic layered double hydroxides as highly active and stable heterogeneous catalyst

Synthesis of stable flowerlike MgAl-LDH@MIL-88A and its adsorption performance for fluoride

MgAl-LDH@MIL-88A as an effective adsorbent was successfully prepared by a simple stirring method in water bath through loading MIL-88A onto the surface of flowerlike MgAl-LDH, which was synthesized via solvothermal method. Interestingly, the results of characterizations showed that the MIL-88A could still grow, but extrude the brucite-like layers of MgAl-LDH. The influences of initial solution pH, contact time, temperature, and co-existing ions on the adsorption performance of MgAl-LDH@MIL-88A were studied systematically by batch static adsorption experiments. It was found that MgAl-LDH@MIL-88A represented the highest adsorption loading of fluoride (14.00 mg g−1) at initial pH 7.0 in 420 min. The uptake process was described appropriately by the pseudo-second-order, the Temkin and the Freundlich isotherm models. The thermodynamic parameters confirmed the endothermic and spontaneous nature of adsorption. MgAl-LDH@MIL-88A was the green adsorbent as the residual mental contents ([Mg2+] = 1.095 mg L−1, [Fe3+] = 0.007 mg L−1, [Al3+] = 0.076 mg L−1) after adsorption met the Chinese sanitary standard for drinking water (GB 5749-2006). The mechanism of fluoride removal by MgAl-LDH@MIL-88A involved the electrostatic interactions between Fe3+ of MIL-88A and fluoride, and ligand exchange among hydroxyl groups of MgAl-LDH, carboxylate groups of the C4H4O4 and fluoride.

Ultrafast photodegradation of nitenpyram by Ag/Ag3PO4/Zn-Al LDH composites activated by persulfate system: Removal efficiency, degradation pathway and reaction mechanism

In this study, an investigation is conducted into the degradation of nitenpyram (NTP) using highly efficient APMMO/PDS/Vis system. As photocatalysts, silver phosphate (AP) and calcined Zn-Al layered double hydroxides (MMO) exhibit high efficiency in achieving charge separation. Besides, the injection of electrons into peroxydisulfate (PDS) from the APMMO can contribute to obtaining the species in the active state with higher efficiency. Based on the APMMO/PDS/Vis system, 50 mg/L of nitenpyram (NTP, 50 mL) can be completely removed in 60 min using 0.8 g/L photocatalyst and 0.2 g/L PDS under the optimum condition and visible light (780 nm > λ > 420 nm). Meanwhile, as demonstrated under visible light within 30 min, an ultrahigh degradation efficiency can be achieved by NTP based on APMMO1/PDS/Vis system. Besides, the electron paramagnetic resonance (EPR) technique and radical quenching experiments suggested ¹O₂, h⁺, SO₄^-•, •O₂^-, and •OH are all contributory to the removal of pollutants. Given the outcomes achieved by LC/MS system and mass spectrometry, the primary degradation intermediates of NTP end up being converted into photodegradation products (such as 2-Chloropyridine, 6-Chloropurine Riboside and dl-Leucine). Additionally, there are three potential photodegradation pathways to NTP degradation have been deployed. Moreover, the NTP light degradation occurring in APMMO1/PDS/Vis system is competent under the three types of real water sample. Accordingly, the high-efficiency APMMO1/PDS/Vis system is fit for use in water pollution control for agricultural productions.

Immobilization of Ag(0) nanoparticles on quaternary ammonium functionalized polyacrylonitrile fiber as a highly active catalyst for 4-nitrophenol reduction

Ag(0) nanoparticles were immobilized on various pyridine salt, imidazole salt and quaternary ammonium functionalized polyacrylonitrile fibers (PANFs) to prepare Ag(0)-immobilized fiber catalysts. The catalytic activities of these immobilized catalysts for 4-nitrophenol (4-NP) reduction were detected. Among them, the quaternary ammonium fiber with butyl group immobilized Ag(0) nanoparticle catalyst PANQA-C4F-Ag(0) showed the best catalytic activity, and can effectively catalyze 4-nitrophenol (4-NP) reduction with a high conversation rate of 99.6%. Furthermore, PANQA-C4F-Ag(0) can be easily recovered, and it was reused 20 times with little decrease in catalytic activity and moderate Ag retention (53.5%). Notably, the cationic groups in the functionalized fibers can stabilize Ag(0) nanoparticles through electrostatic interactions and steric effects, and play an important role in phase transfer catalysis. Accordingly, possible mechanisms for the 4-NP reduction catalyzed by PANQA-C4F-Ag(0) were proposed.

Cu/Cux S-Embedded N,S-Doped Porous Carbon Derived in Situ from a MOF Designed for Efficient Catalysis

The reasonable design of the precursor of a carbon-based nanocatalyst is an important pathway to improve catalytic performance. In this study, a simple solvothermal method was used to synthesize [Cu(TPT)(2,5-tdc)] ⋅ 2H₂ O (Cu-MOF), which contains N and S atoms, in one step. Further in-situ carbonization of the Cu-MOF as the precursor was used to synthesize Cu/Cu_x S-embedded N,S-doped porous carbon (Cu/Cu_x S/NSC) composites. The catalytic activities of the prepared Cu/Cu_x S/NSC were investigated through catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The results show that the designed Cu/Cu_x S/NSC has exceptional catalytic activity and recycling stability, with a reaction rate constant of 0.0256 s^-1 , and the conversion rate still exceeds 90 % after 15 cycles. Meanwhile, the efficient catalytic reduction of dyes (CR, MO, MB and RhB) confirmed its versatility. Finally, the active sites of the Cu/Cu_x S/NSC catalysts were analyzed, and a possible multicomponent synergistic catalytic mechanism was proposed.

Highly dispersive NiCo2S4 nanoparticles anchored on nitrogen-doped carbon nanofibers for efficient hydrogen evolution reaction

To solve the energy crisis problem, many efforts have been devoted to develop clean and sustainable alternatives to fossil fuels. Among varieties of pathways to obtain clean energy, electrochemical water splitting is a promising approach. Herein, we had successfully synthesized the NiCo₂S₄@porous nitrogen-doped carbon nanofibers (NiCo₂S₄@NCNF) nanocomposite via three successive steps consisted of in-situ oxidative polymerization, calcination, and solvothermal sulfuration reaction processes. The effect of controlled molar ratios to electrocatalytic performance was studied in detail. The optimized NiCo₂S₄@NCNF nanocomposite exhibits superior electrocatalytic activity for hydrogen evolution reaction with a small overpotential of 117 mV to drive a current density of 10 mA cm^-2. More importantly, it exhibits similar electrocatalytic activity to the initial state even after successive cyclic voltammetry scan for 3000 cycles, indicating its excellent long-term stability. The superior electrochemical performance is attributed to the developed three-dimensional (3D) network nanostructure derived from bacterial cellulose nanofibers, the highly conductive porous nitrogen-doped carbon nanofibers, and the synergistic effect between metal Ni and Co of NiCo₂S₄. This study permits a new pathway to design efficient electrocatalysts based on eco-friendly materials for the production of clean hydrogen energy.