Hierarchical nickel–cobalt oxide and glucose-based carbon electrodes for asymmetric supercapacitor with high energy density

Response Surface Methodology Optimization in High-Performance Solid-State Supercapattery Cells Using NiCo2S4–Graphene Hybrids

In this work, NiCo₂S₄–graphene hybrids (NCS@G) with high electrochemical performance were prepared using a hydrothermal method. The response surface methodology (RSM), along with a central composite design (CCD), was used to investigate the effect of independent variables (G/NCS, hydrothermal time, and S/Ni) on the specific capacitances of the NCS@G/Ni composite electrodes. RSM analysis revealed that the developed quadratic model with regression coefficient values of more than 0.95 could be well adapted to represent experimental results. Optimized preparation conditions for NCS@G were G/NCS = 6.0%, hydrothermal time = 10.0, and S/Ni = 6.0 of NCS@G (111) sample. The maximum specific capacitance of NCS@G (111)/Ni fabricated at the optimal condition is about 216% higher than the best result obtained using the conventional experimental method. The enhanced capacitive performance of the NCS@G (111) sample can be attributed to the synergistic effect between NCS nanoparticles and graphene, which has the meso/macropores conductive network and low diffusion resistance. Notably, the NCS@G (111) could not only provide numerous reaction sites but also prevent the restacking of graphene layers. Furthermore, a supercapattery cell was fabricated with an (G + AC)/Ni anode, a NCS@G (111)/Ni cathode, and a carboxymethyl cellulose–potassium hydroxide (CMC-KOH) gel electrolyte. The NCS@G (111)//(G + AC) demonstrates an outstanding energy density of 80 Wh kg⁻¹ at a power density of 4 kW kg⁻¹, and a good cycling performance of 75% after 5000 cycles at 2 A g⁻¹. Applying the synthesis strategy of RSM endows remarkable capacitive performance of the hybrid materials, providing an economical pathway to design promising composite electrode material and fabricate high-performance energy storage devices.

Fabrication of 5 V High-Performance Solid-State Asymmetric Supercapacitor Device Based on MnO2/Graphene/Ni Electrodes

To reach high energy density and excellent cycle stability, an asymmetric supercapacitor device combining a high-power electric double-layer capacitor (EDLC) anode and high energy density battery-type cathode has been designed and fabricated. A binder-free strategy was used to prepare cathode by coating graphene (G) on Ni foam (Ni), then electrodepositing MnO2, followed by calcination process. The potentiodynamic (PD) electrodeposition cycles of MnO2 onto graphene significantly impact the electrochemical properties. Benefiting from the hierarchical structure and binder-free process of the designed 75 C/G/Ni hybrid cathode, potentiostatic (PS) electrodeposition followed by PD electrodeposition for 75 cycles demonstrates a high specific capacitance of 691 F g−1 at 2 A g−1. The enhanced capacitive performance can be attributed to the synergistic effect between MnO2 nanosheets and graphene, in which graphene can serve as ideal support matrix and conductive channels. Furthermore, an asymmetric supercapacitor was fabricated with 75 C/G/Ni and (G + AC)/Ni as the cathode and anode, respectively, and a carboxymethyl cellulose–potassium hydroxide (CMC-KOH) gel electrolyte. The 75 C/G/Ni//(G + AC)/Ni asymmetric supercapacitor (ASC) exhibits a maximum energy density of 43 kW kg−1 at a power density of 302 W kg−1 with a potential window of 1.6 V and maintains good cycling stability of 88% capacitance retention at 2 A g−1 (over 5000 cycles). Four solid-state asymmetric supercapacitors stack connected in series display an effective 5.0 V working potential to increase the voltage and output energy as a device. The device was charged using a 18,650 Li battery with a voltage of +3.8 V for 30 s and discharged six white LEDs for 20 min. The facile fabrication and remarkable capacitive performance of the MnO2/G/Ni hybrid make it a promising electrode candidate in electrochemical energy conversion/storage devices.

In Situ Binder-Free and Hydrothermal Growth of Nanostructured NiCo2S4/Ni Electrodes for Solid-State Hybrid Supercapacitors

Herein, we report a comparison of the electrochemical performance of two kinds of NiCo2S4-based electrodes for solid-state hybrid supercapacitors (HSCs). For the binder-free electrode, NiCo2S4 was grown on Ni foam by the chemical bath deposition (CBD) method. For the binder-using electrode, NiCo2S4 powder was synthesized by the hydrothermal method. FESEM images depicted the hierarchical nanostructure of NiCo2S4 synthesized by the hydrothermal method and uniform distribution of nanostructured NiCo2S4 grown on Ni foam by the CBD method. Half-cell studies of both NiCo2S4 electrodes showed them exhibiting battery-type charge storage behavior. To assemble HSCs, NiCo2S4 and activated carbon were used as a positive and negative electrode, respectively. Electrochemical studies of the HSCs showed that the accessible potential window was wide, up to 2.6 V, through cyclic voltammetry (CV) analysis. Chronopotentiometry (CP) studies revealed that the energy and power densities of binder-using HSC were 51.24 Wh/kg and 13 kW/kg at 1 Ag−1, respectively, which were relatively higher than those of the binder-free HSC. The binder-free HSC showed 52% cyclic stability, relatively higher than that of the binder-using HSC. Both HSCs, with unique benefits and burdens on energy storage performance, are discussed in this work.

Coconut Shell-Derived Activated Carbon for High-Performance Solid-State Supercapacitors

Coconut shells, low-cost and renewable agro-wastes, were used as a starting material in the synthesis of hierarchical activated carbons via hydrothermal, KOH-activation, and carbonization techniques. The ratio of KOH to hydrochar was varied in a systemic manner to study how it influences the texture and electrochemical behavior of the capacitor. Coconut shell-based carbon coated on nickel foams presented a surface area of 1567 m2 g−1, with micropores as well as mesopores widely distributed. The sample showed superior electrochemical performance, attaining 449 F g−1 at 1 A g−1 in 6 M LiNO3 aqueous solution. The solid-state symmetric supercapacitor device delivered a specific capacitance of 88 F g−1 at 1 A g−1 and a high energy density of 48.9 Whkg−1 at a power density of 1 kW kg−1. At a wide voltage window of 2.0 V, the sample was highly stable during the cycle test, showing a 92% capacitance retention at 2 A g−1 after cycling for 5000 times. The superior performance is due to the sample possessing great BET surface area, a good distribution of pores, and the usage of a suitable electrolyte. This facilitates an electrical double layer that can be deployed for applications to store energy.

Biomass-Derived Porous Carbons Derived from Soybean Residues for High Performance Solid State Supercapacitors

A series of heteroatom-containing porous carbons with high surface area and hierarchical porosity were successfully prepared by hydrothermal, chemical activation, and carbonization processes from soybean residues. The initial concentration of soybean residues has a significant impact on the textural and surface functional properties of the obtained biomass-derived porous carbons (BDPCs). SRAC5 sample with a BET surface area of 1945 m2 g-1 and a wide micro/mesopore size distribution, nitrogen content of 3.8 at %, and oxygen content of 15.8 at % presents the best electrochemical performance, reaching 489 F g-1 at 1 A g-1 in 6 M LiNO3 aqueous solution. A solid-state symmetric supercapacitor (SSC) device delivers a specific capacitance of 123 F g-1 at 1 A g-1 and a high energy density of 68.2 Wh kg-1 at a power density of 1 kW kg-1 with a wide voltage window of 2.0 V and maintains good cycling stability of 89.9% capacitance retention at 2A g-1 (over 5000 cycles). The outstanding electrochemical performances are ascribed to the synergistic effects of the high specific surface area, appropriate pore distribution, favorable heteroatom functional groups, and suitable electrolyte, which facilitates electrical double-layer and pseudocapacitive mechanisms for power and energy storage, respectively.