Metal-organic framework (ZIF-67) interwoven multiwalled carbon nanotubes as a sensing platform for rapid administration of serotonin

In-situ growth of MOF-derived Co3S4@MoS2 heterostructured electrocatalyst for the detection of furazolidone

The over-exploitation of antibiotics in food and farming industries ruined the environmental and human health. Consequently, electrochemical sensors offer significant advantages in monitoring these compounds with high accuracy. Herein, MOF-derived hollow Co3S4@MoS2 (CS@MS) heterostructure has been prepared hydrothermally and applied to fabricate an electrochemical sensor to monitor nitrofuran class antibiotic drug. Various spectroscopic methodologies have been employed to elucidate the structural and morphological information. Our prepared electrocatalyst has better electrocatalytic performance than bare and other modified glassy carbon electrodes (GCE). Our CS@MS/GCE sensor exhibited a highly sensitive detection by offering a low limit of detection, good sensitivity, repeatability, reproducibility, and stability results. In addition, our sensor has shown a good selectivity towards the target analyte among other potential interferons. The practical reliability of the sensor was measured by analyzing various real-time environmental and biological samples and obtaining good recovery values. From the results, our fabricated CS@MS could be an active electrocatalyst material for an efficient electrochemical sensing application.

Unlocking the future of brain research: MOFs, TMOs, and MOFs/TMOs for electrochemical NTMs detection and analysis

The central nervous system relies heavily on neurotransmitters (NTMs), and NTM imbalances have been linked to a wide range of neurological conditions. Thus, the development of reliable detection techniques is essential for advancing brain studies. This review offers a comprehensive analysis of metal-organic frameworks (MOFs), transition metal oxides (TMOs), and MOFs-derived TMOs (MOFs/TMOs) as materials for electrochemical (EC) sensors targeting the detection of key NTMs, specifically dopamine (DA), epinephrine (EP), and serotonin (SR). The unique properties and diverse families of MOFs and TMOs, along with their nanostructured hybrids, are discussed in the context of EC sensing. The review also addresses the challenges in detecting NTMs and proposes a systematic approach to tackle these obstacles. Despite the vast amount of research on MOFs and TMOs-based EC sensors for DA detection, the review highlights the gaps in the literature for MOFs/TMOs-based EC sensors specifically for EP and SR detection, as well as the limited research on microneedles (MNs)-based EC sensors modified with MOFs, TMOs, and MOFs/TMOs for NTMs detection. This review serves as a foundation to encourage researchers to further explore the potential applications of MOFs, TMOs, and MOFs/TMOs-based EC sensors in the context of neurological disorders and other health conditions related to NTMs imbalances.

Facile Synthesis of Needle-like Copper Sulfide Structures as an Effective Electrochemical Sensor Material for Neurotransmitter Detection in Biological Samples

Electrochemical sensors, due to their excellent and unique features, are of high interest nowadays for the detection and monitoring of several biological compounds. In such a case, serotonin (SRN), an important neurotransmitter, was herein studied for its detection in biological fluids since its presence is more crucial to be monitored and detected in clinical and medical applications. Several study strategies have been used to determine the chemical and physical properties. The crystalline size of the constructed copper sulfide (Cu2S) material was measured to be 25.92 nm. The Cu2S was fabricated over the working surface and further analyzed for several sensor parameters to be optimized. The charge transfer resistance of the copper sulfide-modified glassy carbon electrode (Cu2S/GCE) was determined to be about 277.0 Ω. With the linear range from about 0.029 μM to 607.6 μM for SRN, the limit of detection (LOD) was calculated as 3.2 nM, with a good sensitivity of 13.23 μA μM-1 cm2. The sensor experienced excellent repeatability, reproducibility, and long-term stability. The fabricated electrode was selective with the presence of different interfering compounds. The real sample analysis, as determined with the regular addition method with human serum and urine samples, revealed a good recovery percentage. Thus, the employed fabricated electrode material will be highly effective in sensing other analytes of choice.

Adsorption of hexavalent chromium, Rhodamine B and Congo red simultaneously in aquatic by zeolitic imidazolate framework coupling carbon nanotubes

Zeolitic imidazolate framework/carbon nanotube (ZIF-67/CNTs) was prepared by precipitation method. ZIF-67/CNTs maintained the characteristics of large specific surface area and high porosity of ZIFs, showing stable cubic structure. The adsorption capacities of ZIF-67/CNTs for Cong red (CR), Rhodamine B (RhB) and Cr(VI) were 36.82 mg/g, 1421.29 mg/g and 716.67 mg/g under the conditions of 2:1, 3:1 and 1:3 masses of ZIF-67 and CNTs, respectively. The optimum adsorption temperature of CR, RhB and Cr(VI) were 30 °C, and the removal rates at the adsorption equilibrium were 81.22%, 72.87% and 48.35%. The adsorption kinetic model of the three adsorbents on ZIF-67/CNTs was consistent with the quasi-second order reaction model, and the adsorption isotherms were more consistent with adsorption law of Langmuir. The adsorption mechanism for Cr(VI) was mainly electrostatic interaction, and the adsorption mechanism for azo dyes was the combination of physical and chemical adsorption. This study would provide theoretical basis for further developing metal organic framework (MOF) materials for environmental applications.

Recent advances in metal-organic framework/carbon nanotube nanocomposites for developing analytical applications

Nanoscience shows promise for scientific advancement in many sectors, such as biology, energy, materials, environment, and manufacturing. Nanocomposites are mixtures of two or more materials, one of which is nanosized particles. The composites are expected to show combined features resulting in general enhancements in their physical and chemical properties. Metal-organic frameworks (MOFs) are coordination polymers that have attracted attention from researchers in recent years due to their porosity and controllable functionality. Another example of interesting nanomaterials is carbon nanotubes (CNTs) which are also known for their mechanical and thermal properties. Incorporation of both these materials into a nanocomposite has shown an enhancement in properties and conquered challenges in the defects of construction. This mini-review sheds light on the recent synthetic approaches and characterization of MOF-CNT nanocomposites in order to access porous selective nanocomposites that can improve analyte detection in environmental matrixes and biological systems. A summary of the chemical composition of nanocomposites, analytes in the target, and analytical techniques used is provided.

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

Increasing trace levels of antibiotics and hormones in the environment and food samples are concerning and pose a threat. Opto-electrochemical sensors have received attention due to their low cost, portability, sensitivity, analytical performance, and ease of deployment in the field as compared to conventional expensive technologies that are time-consuming and require experienced professionals. Metal-organic frameworks (MOFs) with variable porosity, active functional sites, and fluorescence capacity are attractive materials for developing opto-electrochemical sensors. Herein, the insights into the capabilities of electrochemical and luminescent MOF sensors for detection and monitoring of antibiotics and hormones from various samples are critically reviewed. The detailed sensing mechanisms and detection limits of MOF sensors are addressed. The challenges, recent advances, and future directions for the development of stable, high-performance MOFs as commercially viable next-generation opto-electrochemical sensor materials for the detection and monitoring of diverse analytes are discussed.

Comparison of a 2D/3D imidazole-based MOF and its application as a non-enzymatic electrochemical sensor for the detection of uric acid

Two dimensional microplate of W-ZIF-67 promotes a high catalytic activity for non-enzymatic electrochemical uric acid detection.