Biomechanics of the knee joint in flexion under various quadriceps forces

Shape Memory Alloys Patches to Mimic Rolling, Sliding, and Spinning Movements of the Knee

Every year, almost 4 million patients received medical care for knee osteoarthritis. Osteoarthritis involves progressive deterioration or degenerative changes in the cartilage, leading to inflammation and pain as the bones and ligaments are affected. To enhance treatment and surgical outcomes, various studies analyzing the biomechanics of the human skeletal system by fabricating simulated bones, particularly those reflecting the characteristics of patients with knee osteoarthritis, are underway. In this study, we fabricated replicated bones that mirror the bone characteristics of patients with knee osteoarthritis and developed a skeletal model that mimics the actual movement of the knee. To create patient-specific replicated bones, models were extracted from computerized tomography (CT) scans of knee osteoarthritis patients. Utilizing 3D printing technology, we replicated the femur and tibia, which bear the weight of the body and support movement, and manufactured cartilage capable of absorbing and dispersing the impact of knee joint loads using flexible polymers. Furthermore, to implement knee movement in the skeletal model, we developed artificial muscles based on shape memory alloys (SMAs) and used them to mimic the rolling, sliding, and spinning motions of knee flexion. The knee movement was investigated by changing the SMA spring's position, the number of coils, and the applied voltage. Additionally, we developed a knee-joint-mimicking system to analyze the movement of the femur. The proposed artificial-skeletal-model-based knee-joint-mimicking system appears to be applicable for analyzing skeletal models of knee patients and developing surgical simulation equipment for artificial joint replacement surgery.

Finite element analysis of sagittal angles of unicompartmental knee arthroplasty

BACKGROUND

Unicompartmental knee arthroplasty is an effective treatment for knee osteoarthritis, but it has the risk of failure, and the installation position of the prosthesis is one of the factors affecting the failure. There are few biomechanical studies on the installation angle of unicompartmental knee prosthesis.

METHODS

Constructed a finite element model of a normal human knee joint, and the validity of the model was verified by stress and front anterior methods. The mobile-bearing unicompartmental knee arthroplasty femoral prosthesis was placed at 3° intervals from 0° sagittal plane to 15° flexion, and - 2° and 17°were established, and observing the biomechanical changes of components.

FINDINGS

Maximum peak stresses occurred at a sagittal mounting angle of -2° for the insert and the contralateral meniscus, with the tibia showing a maximum at 17° sagittal and the tibial prosthesis stress maximum occurring at 6° sagittal. As the sagittal plane angle of the femoral prosthesis increases and the osteotomy distance extends posteriorly, more bone is amputated during the osteotomy. The ratio of the distance from the tip of the anterior intramedullary nail to the anterior end of the osteotomy to the total anteroposterior length of the sagittal osteotomy ranged from 43.2% to 44.6%.

INTERPRETATION

In this paper, the more appropriate sagittal mounting position for the femoral prosthesis is between 9 and 12°, based on the amount of osteotomy and the peak stress of each component in a standing position.

The application of human medical image-based finite element analysis in the construction of mouse osteoarthritis models

The anterior cruciate ligament plays an important role in maintaining the stability of the knee joint. Its injury is a common cause of articular cartilage degeneration and osteoarthritis (OA). The anterior cruciate ligament transection (ACLT) method is commonly employed to construct animal models for studying osteoarthritis pathogenesis. However, the precise mechanism of how anterior cruciate ligament injury leads to osteoarthritis is not fully understood. This study utilized finite element analysis (FEA) with human medical images to simulate the biomechanical characteristics of anterior cruciate ligament (ACL) injury. Osteoarthritis models were subsequently established in C57BL/6 mice using ACLT to explore the link between ACL injury and osteoarthritis development. The results of FEA showed that, after an anterior cruciate ligament injury, abnormal stress was concentrated in the medial and lateral of the femoral and tibial articular cartilage during knee flexion and extension. In order to better display the pathological changes of articular cartilage in the stress areas, the medial tibial cartilage was selected as a representative area to observe the continuous pathological changes of articular cartilage in ACLT-induced OA mice. The articular cartilage degeneration was most dramatic at four weeks post ACLT operation and then remained relatively stable. This study may have significant implications for the development of animal models of osteoarthritis and provide a reference for histopathological research on osteoarthritis.

Investigating the effect of autograft diameter for quadriceps and patellar tendons use in anterior cruciate ligament reconstruction: a biomechanical analysis using a simulated Lachman test

Introduction

Current clinical practice suggests using patellar and quadriceps tendon autografts with a 10 mm diameter for ACL reconstruction. This can be problematic for patients with smaller body frames. Our study objective was to determine the minimum diameter required for these grafts. We hypothesize that given the strength and stiffness of these respective tissues, they can withstand a significant decrease in diameter before demonstrating mechanical strength unviable for recreating the knee's stability.

Methods

We created a finite element model of the human knee with boundary conditions characteristic of the Lachman test, a passive accessory movement test of the knee performed to identify the integrity of the anterior cruciate ligament (ACL). The Mechanical properties of the model's grafts were directly obtained from cadaveric testing and the literature. Our model estimated the forces required to displace the tibia from the femur with varying graft diameters.

Results

The 7 mm diameter patellar and quadriceps tendon grafts could withstand 55-60 N of force before induced tibial displacement. However, grafts of 5.34- and 3.76-mm diameters could only withstand upwards of 47 N and 40 N, respectively. Additionally, at a graft diameter of 3.76 mm, the patellar tendon experienced 234% greater stiffness than the quadriceps tendon, with similar excesses of stiffness demonstrated for the 5.34- and 7-mm diameter grafts.

Conclusions

The patellar tendon provided a stronger graft for knee reconstruction at all diameter sizes. Additionally, it experienced higher maximum stress, meaning it dissociates force better across the graft than the quadriceps tendon. Significantly lower amounts of force were required to displace the tibia for the patellar and quadriceps tendon grafts at 3.76- and 5.34-mm graft diameters. Based on this point, we conclude that grafts below the 7 mm diameter have a higher chance of failure regardless of graft selection.

The non-invasive evaluation technique of patellofemoral joint stress: a systematic literature review

Introduction: Patellofemoral joint stress (PFJS) is an important parameter for understanding the mechanism of patellofemoral joint pain, preventing patellofemoral joint injury, and evaluating the therapeutic efficacy of PFP rehabilitation programs. The purpose of this systematic review was to identify and categorize the non-invasive technique to evaluate the PFJS. Methods: Literature searches were conducted from January 2000 to October 2022 in electronic databases, namely, PubMed, Web of Science, and EBSCO (Medline, SPORTDiscus). This review includes studies that evaluated the patellofemoral joint reaction force (PJRF) or PFJS, with participants including both healthy individuals and those with patellofemoral joint pain, as well as cadavers with no organic changes. The study design includes cross-sectional studies, case-control studies, and randomized controlled trials. The JBI quality appraisal criteria tool was used to assess the risk of bias in the included studies. Results: In total, 5016 articles were identified in the database research and the citation network, and 69 studies were included in the review. Discussion: Researchers are still working to improve the accuracy of evaluation for PFJS by using a personalized model and optimizing quadriceps muscle strength calculations. In theory, the evaluation method of combining advanced computational and biplane fluoroscopy techniques has high accuracy in evaluating PFJS. The method should be further developed to establish the "gold standard" for PFJS evaluation. In practical applications, selecting appropriate methods and approaches based on theoretical considerations and ecological validity is essential.

Tricompartment offloader knee brace reduces sagittal plane knee moments, quadriceps muscle activity, and pain during chair rise and lower in individuals with knee osteoarthritis

The Levitation tricompartment offloader (TCO) knee brace provides an assistive knee extension moment with the goal of unloading all three compartments of the knee and reducing pain for individuals with multicompartment knee osteoarthritis (OA). This study aimed to determine the effect of the TCO brace on sagittal plane knee moments, quadriceps muscle activity, and pain in individuals with multicompartment knee OA. Lower limb kinematics, kinetics, and electromyography data were collected during a chair rise and lower to determine differences between bracing conditions. TCO brace use significantly decreased the peak net knee external flexion moment in high power mode, providing extension assistance during chair rise [p<0.001; mean difference (MD) (98.75% CI) -0.8 (-1.0, -0.6)%BWxH] and bodyweight support during chair lower [p<0.001; -1.1 (-1.6, -0.7)%BWxH]. Quadriceps activation intensity was significantly reduced with brace use by up to 67% for the vastus medialis [Z = -2.55, p = 0.008] and up to 39% for the vastus lateralis [Z = -2.67, p = 0.004]. Participants reported significantly reduced knee pain with the TCO brace worn in high power mode compared to the no brace condition [p = 0.014; MD (97.5% CI) -18.8 (-32.22, -2.34) mm]. These results support the intended mechanism of joint unloading via extension assistance with the TCO brace. The observed biomechanical changes were accompanied by immediate reductions in user reported pain levels, and support the use of the TCO for conservative management to reduce knee pain in patients with multicompartment knee OA.

Persons with Patellar Tendinopathy Exhibit Greater Patellar Tendon Stress during a Single-Leg Landing Task

PURPOSE

This study aimed to compare peak maximum principal stress in the patellar tendon between persons with and without patellar tendinopathy during a simulated single-leg landing task. A secondary purpose was to determine the biomechanical predictor(s) of peak maximum principal stress in the patellar tendon.

METHODS

Using finite element (FE) modeling, patellar tendon stress profiles of 28 individuals (14 with patellar tendinopathy and 14 pain-free controls) were created at the time of the peak knee extensor moment during single-leg landing. Input parameters to the FE model included subject-specific knee joint geometry and kinematics, and quadriceps muscle forces. Independent t -tests were used to compare the peak maximum principal stress in the patellar tendon and biomechanical variables used as input variables to the FE model (knee flexion, knee rotation in the frontal and transverse planes and the peak knee extensor moment) between groups. A stepwise regression model was used to determine the biomechanical predictor(s) of peak maximum principal stress in the patellar tendon for both groups combined.

RESULTS

Compared with the control group, persons with patellar tendinopathy exhibited greater peak maximum principal stress in the patellar tendon (77.4 ± 25.0 vs 60.6 ± 13.6 MPa, P = 0.04) and greater tibiofemoral joint internal rotation (4.6° ± 4.6° vs 1.1° ± 4.2°, P = 0.04). Transverse plane rotation of the tibiofemoral joint was the best predictor of peak maximum principal stress in the patellar tendon ( r = 0.51, P = 0.01).

CONCLUSIONS

Persons with patellar tendinopathy exhibit greater peak patellar tendon stress compared with pain-free individuals during single-leg landing. The magnitude of peak patellar tendon stress seems to be influenced by the amount of tibiofemoral rotation in the transverse plane.

The influence of isolated femur and tibia rotations on patellar tendon stress: A sensitivity analysis using finite element analysis

The purpose of this study was to determine the influence of frontal and transverse plane rotations of the femur and tibia on peak maximum principal stress in the patellar tendon. Using finite element modeling, patellar tendon stress profiles of eight healthy individuals were obtained during a simulated squatting task (45° of knee flexion). The femur and tibia of each model were rotated 10° (in 2° increments) along their respective axes beyond that of the natural degree of rotation. This process was repeated for the transverse plane (internal and external rotation) and frontal plane (adduction and abduction). Quasi-static loading simulations were performed to quantify peak maximum principal stress in patellar tendon. Internal and external rotations of the femur and tibia that exceeded 4° beyond that of the natural rotation resulted in progressively greater patellar tendon stress (p < 0.05). Incremental femur and tibia adduction and abduction resulted in an increase in patellar tendon stress, but only at the end range of motions evaluated. These results suggest that tibiofemoral rotations in the frontal and transverse planes have the potential to influence patellar tendon stress. In particular, patellar tendon stress is highly sensitive to small degrees of tibia and/or femur motions in the transverse plane.

Computational biomechanics of human knee joint in stair ascent: Muscle-ligament-contact forces and comparison with level walking

About a third of knee joint disorders originate from the patellofemoral (PF) site that makes stair ascent a difficult activity for patients. A detailed finite element model of the knee joint is coupled to a lower extremity musculoskeletal model to simulate the stance phase of stair ascent. It is driven by the mean of measurements on the hip-knee-ankle moments-angles as well as ground reaction forces reported in healthy individuals. Predicted muscle activities compare well to the recorded electromyography data. Peak forces in quadriceps (3.87 BW, body weight, at 20% instance in our 607 N subject), medial hamstrings (0.77 BW at 20%), and gastrocnemii (1.21 BW at 80%) are estimated. Due to much greater flexion angles-moments in the first half of stance, large PF contact forces (peak of 3.1 BW at 20% stance) and stresses (peak of 4.83 MPa at 20% stance) are estimated that exceed their peaks in level walking by fourfold and twofold, respectively. Compared with level walking, ACL forces diminish in the first half of stance but substantially increase later in the second half (peak of 0.76 BW at 75% stance). Under nearly similar contact forces at 20% of stance, the contact stress on the tibiofemoral (TF) medial plateau reaches a peak (9.68 MPa) twice that on the PF joint suggesting the vulnerability of both joints. Compared with walking, stair ascent increases peak ACL force and both peak TF and PF contact stresses. Reductions in the knee flexion moment and/or angle appear as a viable strategy to mitigate internal loads and pain.

Use of a Novel Multimodal Imaging Technique to Model In Vivo Quadriceps Force and ACL Strain During Dynamic Activity

BACKGROUND

Quadriceps loading of the anterior cruciate ligament (ACL) may play a role in the noncontact mechanism of ACL injury. Musculoskeletal modeling techniques are used to estimate the intrinsic force of the quadriceps acting at the knee joint.

PURPOSE/HYPOTHESIS

The purpose of this paper was to develop a novel musculoskeletal model of in vivo quadriceps force during dynamic activity. We used the model to estimate quadriceps force in relation to ACL strain during a single-leg jump. We hypothesized that quadriceps loading of the ACL would reach a local maximum before initial ground contact with the knee positioned in extension.

STUDY DESIGN

Descriptive laboratory study.

METHODS

Six male participants underwent magnetic resonance imaging in addition to high-speed biplanar radiography during a single-leg jump. Three-dimensional models of the knee joint, including the femur, tibia, patellofemoral cartilage surfaces, and attachment-site footprints of the patellar tendon, quadriceps tendon, and ACL, were created from the magnetic resonance imaging scans. The bone models were registered to the biplanar radiographs, thereby reproducing the positions of the knee joint at the time of radiographic imaging. The magnitude of quadriceps force was determined for each knee position based on a 3-dimensional balance of the forces and moments of the patellar tendon and the patellofemoral cartilage contact acting on the patella. Knee kinematics and ACL strain were determined for each knee position.

RESULTS

A local maximum in average quadriceps force of approximately 6500 N (8.4× body weight) occurred before initial ground contact. ACL strain increased concurrently with quadriceps force when the knee was positioned in extension.

CONCLUSION

This novel participant-specific modeling technique provides estimates of in vivo quadriceps force during physiologic dynamic loading. A local maximum in quadriceps force before initial ground contact may tension the ACL when the knee is positioned in extension.

CLINICAL RELEVANCE

These data contribute to understanding noncontact ACL injury mechanisms and the potential role of quadriceps activation in these injuries.

Computational analysis of tibial slope adjustment with fixed-bearing medial unicompartmental knee arthroplasty in ACL- and PCL-deficient models

AIMS

A functional anterior cruciate ligament (ACL) or posterior cruciate ligament (PCL) has been assumed to be required for patients undergoing unicompartmental knee arthroplasty (UKA). However, this assumption has not been thoroughly tested. Therefore, this study aimed to assess the biomechanical effects exerted by cruciate ligament-deficient knees with medial UKAs regarding different posterior tibial slopes.

METHODS

ACL- or PCL-deficient models with posterior tibial slopes of 1°, 3°, 5°, 7°, and 9° were developed and compared to intact models. The kinematics and contact stresses on the tibiofemoral joint were evaluated under gait cycle loading conditions.

RESULTS

Anterior translation increased in ACL-deficient UKA cases compared with intact models. In contrast, posterior translation increased in PCL-deficient UKA cases compared with intact models. As the posterior tibial slope increased, anterior translation of ACL-deficient UKA increased significantly in the stance phase, and posterior translation of PCL-deficient UKA increased significantly in the swing phase. Furthermore, as the posterior tibial slope increased, contact stress on the other compartment increased in cruciate ligament-deficient UKAs compared with intact UKAs.

CONCLUSION

Fixed-bearing medial UKA is a viable treatment option for patients with cruciate ligament deficiency, providing a less invasive procedure and allowing patient-specific kinematics to adjust posterior tibial slope. Patient selection is important, and while AP kinematics can be compensated for by posterior tibial slope adjustment, rotational stability is a prerequisite for this approach. ACL- or PCL-deficient UKA that adjusts the posterior tibial slope might be an alternative treatment option for a skilled surgeon. Cite this article: Bone Joint Res 2022;11(7):494-502.

Autologous Fibrin Sealants Have Comparable Graft Fixation to an Allogeneic Sealant in a Biomechanical Cadaveric Model of Chondral Defect Repair

Purpose

The purpose of this study is to assess the integrity of chondral defect repairs filled with a cartilage allograft and sealed with either allogeneic fibrin sealant or autologous fibrin sealants created with platelet-rich plasma (PRP) or platelet-poor plasma (PPP) in a cadaver model.

Methods

Twenty-millimeter medial femoral condyle (MFC) chondral defects were created in five human cadaveric knees. The defects were filled with particulated cartilage allograft hydrated with PRP from human donors until slightly recessed. Sealants were applied until flush with the articular surface using PRP and autologous thrombin serum, PPP and autologous thrombin serum, or commercial allogeneic sealant. The MFC defects were cycled using a multiaxial testing system to simulate continuous passive motion undergone during rehabilitation. After testing, the repairs were assessed for integrity by quantitatively comparing defect exposure and qualitatively assessing sealant delamination.

Results

The mean defect exposures were 4.20% ± 5.02% for the PRP group, 4.60% ± 5.18% for the PPP group, and 1.80% ± 2.95% for the allogeneic sealant group. No significant differences were observed between groups (P = .227), and each group had significantly less defect exposure when compared to the critical clinically relevant value assigned to be 30% (P = <.001 for all). No complete sealant delamination was observed, although the allogeneic sealant delaminated with a higher magnitude than did the autologous sealants.

Conclusions

The PRP and PPP sealants were comparable to the allogeneic sealant for graft fixation when used in conjunction with an underlying PRP-hydrated particulated cartilage allograft. The autologous sealants had better delamination resistance than the allogeneic sealant.

Clinical Relevance

The time-zero model is critical in elucidating the retention properties of fibrin and allogenic sealants after cartilage repair and before healing processes help stabilize the repair.

Finite element analysis of femoral component sagittal alignment in mobile-bearing total knee arthroplasty

BACKGROUND: Recently, there has been an increasing interest in mobile-bearing total knee arthroplasty (TKA). However, changes in biomechanics for femoral component alignment in mobile-bearing TKA have not been explored in depth. OBJECTIVE: This study aims to evaluate the biomechanical effect of sagittal alignment of the femoral component in mobile-bearing TKA. METHODS: We developed femoral sagittal alignment models with −3°, 0°, 3°, 5°, and 7° flexion. We also examine the kinematics of the tibiofemoral (TF) joint, contact point on the TF joint, contact stress on the patellofemoral (PF) joint, collateral ligament force, and quadriceps force using a validated computational model under a deep-knee-bend condition. RESULTS: Posterior kinematics of the TF joint increases as the femoral component flexes. The contact stress on the PF joint, collateral ligament force, and the quadriceps force decreases as the femoral component flexes. CONCLUSIONS: Our results show that a slight, approximately 0°∼3°, flexion of the implantation could be an effective substitute technique. However, excessive flexion should be avoided because of the potential loosening of the TF joint.

Muscle Force Contributions to Anterior Cruciate Ligament Loading

Anterior cruciate ligament (ACL) injuries are one of the most common knee pathologies sustained during athletic participation and are characterised by long convalescence periods and associated financial burden. Muscles have the ability to increase or decrease the mechanical loads on the ACL, and thus are viable targets for preventative interventions. However, the relationship between muscle forces and ACL loading has been investigated by many different studies, often with differing methods and conclusions. Subsequently, this review aimed to summarise the evidence of the relationship between muscle force and ACL loading. A range of studies were found that investigated muscle and ACL loading during controlled knee flexion, as well as a range of weightbearing tasks such as walking, lunging, sidestep cutting, landing and jumping. The quadriceps and the gastrocnemius were found to increase load on the ACL by inducing anterior shear forces at the tibia, particularly when the knee is extended. The hamstrings and soleus appeared to unload the ACL by generating posterior tibial shear force; however, for the hamstrings, this effect was contingent on the knee being flexed greater than ~ 20° to 30°. The gluteus medius was consistently shown to oppose the knee valgus moment (thus unloading the ACL) to a magnitude greater than any other muscle. Very little evidence was found for other muscle groups with respect to their contribution to the loading or unloading of the ACL. It is recommended that interventions aiming to reduce the risk of ACL injury consider specifically targeting the function of the hamstrings, soleus and gluteus medius.

Towards Tailored Rehabilitation by Implementation of a Novel Musculoskeletal Finite Element Analysis Pipeline

Tissue-level mechanics (e.g., stress and strain) are important factors governing tissue remodeling and development of knee osteoarthritis (KOA), and hence, the success of physical rehabilitation. To date, no clinically feasible analysis toolbox has been introduced and used to inform clinical decision making with subject-specific in-depth joint mechanics of different activities. Herein, we utilized a rapid state-of-the-art electromyography-assisted musculoskeletal finite element analysis toolbox with fibril-reinforced poro(visco)elastic cartilages and menisci to investigate knee mechanics in different activities. Tissue mechanical responses, believed to govern collagen damage, cell death, and fixed charge density loss of proteoglycans, were characterized within 15 patients with KOA while various daily activities and rehabilitation exercises were performed. Results showed more inter-participant variation in joint mechanics during rehabilitation exercises compared to daily activities. Accordingly, the devised workflow may be used for designing subject-specific rehabilitation protocols. Further, results showed the potential to tailor rehabilitation exercises, or assess capacity for daily activity modifications, to optimally load knee tissue, especially when mechanically-induced cartilage degeneration and adaptation are of interest.

Treatment of C1.1 (AO‑41) tibial plateau fracture: A finite element analysis of single medial, lateral and dual plating

Bicondylar tibial plateau fractures pose many challenges in surgical treatment. The aim of the present study was to analyze three methods of reduction, single medial, single lateral, and dual plating, for the treatment of a bicondylar tibial plateau fracture, through finite element analysis (FEA). A simple metaphyseal fracture, type C1.1 (AO-41) was modeled on a CT-derived 3D model of the knee. Lateral and medial proximal tibial polyaxial plates with screws were modeled and placed accordingly for the three methods of reduction. Simulation of physiological type loading corresponding to the maximal weight acceptance phase during a slow walking gait cycle was performed using FEA. Values of stress and strain were recorded near the fracture lines. Dual plating provided a decrease of stress and strain in the tibial plateau area. However, the differences in the values among the three cases were small. The stress concentration areas were located in the vicinity of the fracture, predominantly in the area of the tibial plateau. Considering the limitations of the present study, the results revealed that dual plating leads to smaller stress and strain values near the fracture lines in the tibial plateau area. However, values obtained for single lateral plating are close in range. Considering the complexity of the surgical approach for dual plating, single lateral plating may be a solution for good reduction with fewer surgical risks and complications. Further studies on the C1.1 fracture (AO-41) are needed to analyze the complex issue of reducing and stabilizing such a fracture and to characterize the postoperative state while providing predictable parameters for an optimal result.

Design and Development of An Instrumented Knee Joint for Quantifying Ligament Displacements

Recently, robotic assistive leg exoskeletons have gained popularity because an increased number of people crave for powered devices to run faster and longer or carry heavier loads. However, these powered devices have the potential to impair knee ligaments. This work was aimed to develop an instrumented knee joint via rapid prototyping that measures the displacements of the four major knee ligaments—the anterior cruciate ligament (ACL), posterior crucial ligament (PCL), medial collateral ligament (MCL), and lateral collateral ligament (LCL)—to quantify the strain experienced by these ligaments. The knee model consists of a femur, lateral and medial menisci, and a tibia-fibula, which were printed from three dimensional (3D) imaging scans. Nonstretchable cords served as main fiber bundles of the ligaments with their desired stiffnesses provided by springs. The displacement of each cord was obtained via a rotary encoder mechanism, and the leg flexion angle was acquired via a closed-loop four-bar linkage of a diamond shape. The displacements were corroborated by published data, demonstrating the profiles of the displacement curves agreed with known results. The paper shows the feasibility of developing a subject-specific knee joint via rapid prototyping that is capable of quantifying the ligament strain via rapid prototyping.

Load bearing performance of mechanical joints inspired by elbow of quadrupedal mammals

One of the biggest issues of the mechanical cylindrical joints is related to premature wear appearing. Application of bioinspiration principles in an engineering context taking advantage of smart solutions offered by nature in terms of kinematic joints could be a way of solving those problems. This work is focussed on joints of one degrees of freedom in rotation (revolute or ginglymus joints in biological terms), as this is one of the most common type of mechanical joints. This type of joints can be found in the elbow of some quadrupedal mammals. The articular morphology of the elbow of these animals differs in the presence/absence of a trochlear sulcus. In this study, bio-inspired mechanical joints based on these morphologies (with/without trochlear sulcus) were designed and numerically tested. Their load bearing performance was numerically analysed. This was done through contact simulations using the finite element method under different external loading conditions (axial load, radial load and turnover moment). Results showed that the tested morphologies behave differently in transmission of external mechanical loads. It was found that bio-inspired joints without trochlea sulcus showed to be more specialized in the bearing of turnover moments. Bio-inspired joints with trochlea sulcus are more suitable for supporting combined loads (axial and radial load and turnover moments). Learning about the natural rules of mechanical design can provide new insights to improve the design of current mechanical joints.

The influence of the number of holes in the open wedge high tibial osteotomy on knee biomechanics using finite element analysis

BACKGROUND

The most significant differences of high tibial osteotomy (HTO) were found in terms of plate length, and this was related to number of holes distal region of the plate below wedge. The purpose of this study is to evaluate the biomechanical effects of three different designs medial opening wedge plates.

HYPOTHESIS

The design of the HTO plate influenced the outcome of the biomechanics.

METHODS

The HTO model was simulated using finite element (FE) model. This FE investigation included three types of loading conditions corresponding to the loads used in the experimental study for model validation and model predictions for clinically relevant loading scenarios. The average stress and contact stress were evaluated.

RESULTS

The highest average stress was observed in the TomoFix. Conversely, the stress on the bone declined in the order of Puddu, Maxi and TomoFix plates. The micromotion in the wedge displayed a similar trend to the stress on bone. The highest and lowest contact stresses on the medial meniscus were observed in the Puddu and TomoFix plate, respectively. However, an opposite trend was observed in the lateral meniscus. The contact stress on medial and lateral menisci decreased and increased, respectively, in all three different plates when compared to those in the intact model.

DISCUSSION

The TomoFix plate exhibited the highest stability relative to the micromotions of the wedge. However, in terms of the stress on the bone and plates, a stress-shielding effect could exist in the TomoFix plate. Additionally, the contact stress on the articular surface suggested that a complicated relationship could exist with respect to the plate design.

LEVEL OF EVIDENCE

IV.

Biomechanical Difference between Conventional Transtibial Single-Bundle and Anatomical Transportal Double-Bundle Anterior Cruciate Ligament Reconstruction Using Three-Dimensional Finite Element Model Analysis

The purpose of our study was to analyze the graft contact stress at the tunnel after transtibial single-bundle (SB) and transportal double-bundle (DB) anterior cruciate ligament (ACL) reconstruction. After transtibial SB (20 cases) and transportal DB (29 cases) ACL reconstruction, the three-dimensional image of each patient made by postoperative computed tomography was adjusted to the validation model of a normal knee and simulated SB and DB ACL reconstructions were created based on the average tunnel position and direction of each group. We also measured graft and contact stresses at the tunnel after a 134 N anterior load from 0° to 90° flexion. The graft and contact stresses became the greatest at 30° and 0° flexion, respectively. The total graft and contact stresses after DB ACL reconstruction were greater than those after SB ACL reconstruction from 0° to 30° and 0° to 90° knee flexion, respectively. However, the graft and contact stresses of each graft after DB ACL reconstruction were less than those after SB ACL reconstruction. In conclusion, the total graft and total contact stresses after DB ACL reconstruction are higher than those after SB ACL reconstruction from 0° to 30° and 0° to 90° knee flexion, respectively. However, the stresses of each graft after DB ACL reconstruction are about half of those after SB ACL reconstruction.

Potential Instability and Malfunction of Knee Joints with Vastus Medialis Impairment after Total Knee Arthroplasty

Four pairs of fresh-frozen cadaver knees (eight knees, four male knees) with a mean age of 72 ± 7 years were used for tests involving a customized simulator capable of controlling quadriceps loading conditions. The muscle force distribution of the quadriceps for the normal loading condition was applied on the basis of muscle cross-sectional area data, as previously reported (VM: 31 N; RF/VI: 49 N; VL: 45 N). To simulate vastus medialis (VM) impairment, we set the muscle force for VM in the muscle force distribution of the quadriceps at zero (VM: 0 N; RF/VI: 49 N; VL: 45 N). The joint reaction forces and moments on knee joints that underwent total knee arthroplasty (TKA) did not differ significantly according to VM impairment status for all flexion angles (p > 0.05). Nevertheless, the vectors of internal–external moments mostly showed a tendency for alteration from external to internal due to VM impairment. This tendency was evident in 9 cases in 12 total test pairs (with and without VM impairment). Furthermore, the vectors of the anterior–posterior reaction forces mostly showed a tendency to increase anteriorly due to VM impairment. This tendency was also evident in 9 cases in 12 total test pairs (with and without VM impairment). These results indicate that posterior dislocation of the tibia may be induced if VM impairment occurs after TKA. In conclusion, VM impairment in knee joints undergoing TKA may contribute to posterior dislocation of the tibia by a paradoxical roll-back with enhancements of the anterior joint reaction force and external moment during knee-joint flexion. Our findings may be valuable for understanding the mechanism of potential instability and malfunction due to VM impairment in knee joints after TKA, and may help to optimize clinical/rehabilitation training plans to improve the prognosis (stability and function) of knee joints undergoing TKA.

Influence of Variation in Sagittal Placement of the Femoral Component after Cruciate-Retaining Total Knee Arthroplasty

Prosthetic alignment is an important factor for long-term survival in cruciate-retaining (CR) total knee arthroplasty (TKA). The purpose of this study is to investigate the influence of sagittal placement of the femoral component on tibiofemoral (TF) kinematics and kinetics in CR-TKA. Five sagittal placements of femoral component models with -3, 0, 3, 5, and 7 degrees of flexion are developed. The TF joint kinematics, quadriceps force, patellofemoral contact force, and posterior cruciate ligament force are evaluated using the models under deep knee-bend loading. The kinematics of posterior TF translation is found to occur with the increase in femoral-component flexion. The quadriceps force and patellofemoral contact force decrease with the femoral-component flexion increase. In addition, extension of the femoral component increases with the increase in posterior cruciate ligament force. The flexed femoral component in CR-TKA provides a positive biomechanical effect compared with a neutral position. Slight flexion could be an effective alternative technique to enable positive biomechanical effects with TKA prostheses.

Forces at the Anterior Meniscus Attachments Strongly Increase Under Dynamic Knee Joint Loading

BACKGROUND

The anatomic appearance and biomechanical and clinical importance of the anterior meniscus roots are well described. However, little is known about the loads that act on these attachment structures under physiological joint loads and movements.

HYPOTHESES

As compared with uniaxial loading conditions under static knee flexion angles or at very low flexion-extension speeds, more realistic continuous movement simulations in combination with physiological muscle force simulations lead to significantly higher anterior meniscus attachment forces. This increase is even more pronounced in combination with a longitudinal meniscal tear or after total medial meniscectomy.

STUDY DESIGN

Controlled laboratory study.

METHODS

A validated Oxford Rig-like knee simulator was used to perform a slow squat, a fast squat, and jump landing maneuvers on 9 cadaveric human knee joints, with and without muscle force simulation. The strains in the anterior medial and lateral meniscal periphery and the respective attachments were determined in 3 states: intact meniscus, medial longitudinal tear, and total medial meniscectomy. To determine the attachment forces, a subsequent in situ tensile test was performed.

RESULTS

Muscle force simulation resulted in a significant strain increase at the anterior meniscus attachments of up to 308% (P < .038) and the anterior meniscal periphery of up to 276%. This corresponded to significantly increased forces (P < .038) acting in the anteromedial attachment with a maximum force of 140 N, as determined during the jump landing simulation. Meniscus attachment strains and forces were significantly influenced (P = .008) by the longitudinal tear and meniscectomy during the drop jump simulation.

CONCLUSION

Medial and lateral anterior meniscus attachment strains and forces were significantly increased with physiological muscle force simulation, corroborating our hypothesis. Therefore, in vitro tests applying uniaxial loads combined with static knee flexion angles or very low flexion-extension speeds appear to underestimate meniscus attachment forces.

CLINICAL RELEVANCE

The data of the present study might help to optimize the anchoring of meniscal allografts and artificial meniscal substitutes to the tibial plateau. Furthermore, this is the first in vitro study to indicate reasonable minimum stability requirements regarding the reattachment of torn anterior meniscus roots.

Finite element analysis of the influence of the posterior tibial slope on mobile-bearing unicompartmental knee arthroplasty

BACKGROUND

The most common modes of failure reported in unicompartmental knee arthroplasty (UKA) in its first two decades were wear on the polyethylene (PE) insert, component loosening, and progressive osteoarthritis in the other compartment. The rates of implant failure due to poor component positioning in patients who have undergone UKA have been reported. However, the effect of the posterior tibial slope on the biomechanical behavior of mobile-bearing Oxford medial UKA remains unknown.

METHODS

We applied finite element (FE) analysis to evaluate the effects of the posterior tibial slope in mobile-bearing UKA on the contact stresses in the superior and inferior surfaces of PE inserts and articular cartilage as well as the forces exerted on the anterior cruciate ligament (ACL). Seven FE models for posterior tibial slopes of -1°, 1°, 3°, 5°, 7°, 9°, and 11° were developed and analyzed under normal-level walking conditions based on this approach.

RESULTS

The maximum contact stresses on both the superior and inferior surfaces of the PE insert decreased as the posterior tibial slope increased. However, the maximum contact stress on the lateral articular cartilage and the force exerted on the ACL increased as the posterior tibial slope increased.

CONCLUSIONS

Increasing the tibial slope led to a reduction in the contact stress on the PE insert. However, a high contact stress on the other compartment and increased ACL force can cause progressive osteoarthritis in the other compartment and failure of the ACL.

Changes in gastrocnemii activation at mid-to-late stance markedly affects the intact and anterior cruciate ligament deficient knee biomechanics and stability in gait

INTRODUCTION

We aimed to quantify the sensitivity in biomechanical response and stability of the intact and anterior cruciate ligament deficient (ACL-D) joints at mid-to-late stance periods of gait to the alterations in activation of gastrocnemii (Gas) muscles.

METHODS

A validated kinematics-driven musculoskeletal finite-element model of the lower extremity is used to compute knee joint response and stability under reported kinetics-kinematics of healthy subjects. Activation in Gas is altered under prescribed gait data at the mid-to-late stance of gait and associated changes in remaining muscle forces/contact forces/areas/ACL force and joint stability are computed in both intact and ACL-D joints.

RESULTS

In the intact joint, the anterior-tibial-translation (ATT) as well as ACL and joint contact forces follow variations in Gas forces. Both the stability and ATT of an ACL-D joint are restored to the near-intact levels when the activity in Gas is reduced. Knee joint instability, excessive ATT as well as larger peak articular contact stresses with a posterior shift in contact areas are estimated under greater Gas forces.

CONCLUSIONS

ACL-D joint is unstable with ATT > 10 mm under larger activities in Gas. Gas is an ACL-antagonist while hamstrings and soleus are ACL-agonists. The near-intact joint stability and ATT of an ACL-D joint can be restored at a lower activation in Gas; or in other words, when activation in ACL-antagonist muscles drops compared with that in ACL-agonist muscles. Results could help analyze the gait of ACL-D copers and non-copers and provide better understanding towards improved preventive, diagnostic, and treatment approaches.

Quadriceps strength and knee joint function in patients with severe knee extension contracture following arthroscopic-assisted mini-incision quadricepsplasty

PURPOSE

To evaluate reserve quadriceps function and improve knee activity in patients with severe knee extension contracture following arthroscopic-assisted mini-incision quadricepsplasty as well as post-operative complications.

METHODS

From 2012 to 2019, 32 patients with severe knee extension contractures (less than 45° range of flexion) were treated with an all-arthroscopic release technique. The clinical results, including range of motion (ROM), quadriceps function (quadriceps index, QI), and knee function, were evaluated, and MRI of the healed tendon after partial quadricepsplasty was performed. The patellar track and length during knee flexion were measured on three normal knees under fluoroscopy. Three formalin-fixed lower limbs were used to mimic severely contracted quadriceps to evaluate the extension of the patellar track.

RESULTS

The median follow-up time was 2.1 years (1-5 years). The average QI was 92.0 ± 6.2, and the quadriceps muscle strength was increased from 3.28 to 4.72. At the final follow-up, 90% of the patients had no difficulty going upstairs, going downstairs, or rising from a chair. The ROM improved by 25.69 ± 3.6 preoperatively to 105.88 ± 6.6 at the final follow-up (P < 0.001). The open surgery showed that a 2-cm extension could be achieved by partly cutting the quadriceps tendon, and two cuts achieved a total extension of 5.2 ± 0.52 cm. The patellar tracking distance was 7.7 ± 0.43 cm, and the gap between the patella and femur was also reduced.

CONCLUSION

Partial quadricepsplasty of the rectus femoris extended the contracted quadriceps and maintained quadriceps strength, allowing for full knee flexion and satisfactory clinical outcomes of knee function with few complications.

A patient-specific finite element analysis of the anterior cruciate ligament under different flexion angles

BACKGROUND

The main responsibility of the anterior cruciate ligament (ACL) is to restore normal knee kinematics and kinetics. Although so far different research has been carried out to measure or quantify the stresses and strains in the ACL experimentally or numerically, there is still a paucity of knowledge in this regard under different flexion angles of the tibiofemoral knee joint.

OBJECTIVE

Understanding the stresses and strains within the ACL under various loading and boundary conditions may have a key asset for the development of an optimal surgical treatment of ACL injury that can better restore normal knee function. This study aimed to calculate the stresses and strains within the ACL under different flexion angles using a patient-specific finite element (FE) model of the human tibiofemoral knee joint.

METHODS

A patient-specific FE model of the human tibiofemoral knee joint was established using computed tomography/magnetic resonance imaging data to calculate the stresses and strains in the ACL under different flexion angles of 0, 10, 20, 30, and 45∘.

RESULTS

Although the role of the flexion angle in the induced stresses and strains of the ACL was insignificant, the highest stress and strain were observed at the flexion angle of 0∘. The concentration of the stresses and strains regardless of the flexion angles were also located at the proximal end of the ACL, where the clinical reports indicated that most ACL tearing occurs there at the femoral insertion site.

CONCLUSIONS

The results have implications not only for understanding the stresses and strains within the ACL under different flexion angles, but also for providing preliminary data for the biomechanical and medical experts in regard of the injuries which may occur to the ACL at relatively higher flexion angles.

Effects of contact stress on patellarfemoral joint and quadriceps force in fixed and mobile-bearing medial unicompartmental knee arthroplasty

Background

Unicompartmental knee arthroplasty (UKA) is an effective treatment for end-stage, symptomatic unicompartmental osteoarthritis of the knee joint. However, patellofemoral joint degeneration is a contraindication to medial UKA. Therefore, the objective of this study was to evaluate the biomechanical effect of medial UKA using fixed-bearing (FB) and mobile-bearing (MB) design prostheses on the patellofemoral joint.

Methods

A three-dimensional finite-element model of a normal knee joint was developed using medical image data. We performed statistical analysis for each model. The differences in contact stress on the patellofemoral joint and the quadriceps force between the FB and MB designs were evaluated under a deep-knee-bend condition.

Results

At an early flexion angle, the results of contact stress showed no significant difference between the FB and MB medial UKA models compared with the intact model. However, at high flexion angles, we observed a significant increase in contact stress with the FB models compared with the intact model. On the contrary, in the case of the MB models, we found no statistically significant increment compared with the intact model. A larger quadriceps force was needed to produce an identical flexion angle for both the FB and MB UKA designs than for the intact model. At high flexion angles, a significant increase quadriceps force whit the FB model compared with the intact model.

Conclusions

Our results indicate that with medial UKA, the contact stress increased and greater quadriceps force was applied to the patellofemoral joint. However, performing UKA on a patellofemoral joint with osteoarthritis should not be difficult, unless anterior knee pain is present, because the increase in contact stress is negligible.

Multiple Subchondral Bone Cysts Cause Deterioration of Articular Cartilage in Medial OA of Knee: A 3D Simulation Study

Aims

To investigate the impact of subchondral bone cysts (SBCs) in stress-induced osseous and articular variations in cystic and non-cystic knee models using finite element analysis.

Materials and Methods

3D knee joint models were reconstructed from computed tomography (CT) and magnetic resonance imaging (MRI). Duplicate 3D models were also created with a 3D sphere mimicking SBCs in medial tibia. Models were divided into three groups. In group A, a non-cystic knee model was used, whereas in groups B and C, SBCs of 4 and 12 mm size were simulated, respectively. Cyst groups were further divided into three sub-groups. Each of sub-group 1 was composed of a solitary SBC in the anterior half of tibia adjacent to joint line. In sub-group 2, a solitary cyst was modeled at a lower-joint location, and in sub-group 3, two SBCs were used. All models were vertically loaded with weights representing double- and single-leg stances.

Results

During single-leg stance, increase in subchondral bone stress in sub-groups B-1 and B-3 were significant (p = 0.044, p = 0.026). However, in sub-group B-2, a slight increase was observed than non-cystic knee model (9.93 ± 1.94 vs. 9.35 ± 1.85; p = 0.254). All the sub-groups in group C showed significantly increased articular stress (p < 0.001). Conversely, a prominent increase in peri-cystic cancellous bone stress was produced by SBCs in groups B and C (p < 0.001). Mean cartilage shear stress in sub-groups B-1 and B-2 (0.66 ± 0.56, 0.58 ± 0.54) was non-significant (p = 0.374, p = 0.590) as compared to non-cystic model (0.47 ± 0.67). But paired cysts of the same size (B-3) produced a mean stress of 0.98 ± 0.49 in affected cartilage (p = 0.011). Models containing 12 mm SBCs experienced a significant increase in cartilage stress (p = 0.001, p = 0.006, p < 0.001) in sub-groups C-1, C-2, and C-3 (1.25 ± 0.69, 1.01 ± 0.54, and 1.26 ± 0.59), respectively.

Conclusion

The presence of large-sized SBCs produced an increased focal stress effect in articular cartilage. Multiple cysts further deteriorate the condition by increased osseous stress effect and high tendency of peripheral cyst expansion in simulated cystic knee models than non-cystic knee models.

Effects of the material properties of a focal knee articular prosthetic on the human knee joint using computational simulation

BACKGROUND

Localized cartilage defects are related to joint pain and reduced function to the development of osteoarthritis. The mechanical properties of the implant for treatment do influence its longevity. Therefore, we aimed to evaluate the effect of material properties' variations of anatomically shaped focal knee implants in the knee joint using numerical finite element analysis.

METHODS

Computational simulations were performed for different cases including an intact knee, a knee with a focal cartilage defect, and a knee fitted with a focal articular prosthetic having three distinct mechanical properties: cobalt-chromium, pyrolytic carbon, and polyethylene. Femoral cartilage, tibial cartilage, and menisci contact pressures were evaluated under the load. In addition, bone stress was evaluated to investigate the stress shielding effect.

RESULTS

Compared with the intact model, the contact stress of the focal implant model was increased; on the femoral lateral cartilage by 14%, on medial and lateral tibial cartilages by nine percent and 10%, on medial and lateral menisci by 23% and 20%. In contrast, the focal implant model had no effect on the menisci but contact stress on the tibial cartilage increased compared with the intact model. The BioPoly model showed the lowest contact stress on femoral and tibial cartilages. Additionally, the cobalt-chromium model showed the lowest bone stress that improved the load-sharing effect.

CONCLUSIONS

The results suggested that implant material properties are an important parameter in the design of a focal implant. The polyethylene model potentially restored the intact knee contact mechanics and it reduced the risk of physiological damage to the articular cartilage.

Changes in Knee Joint Mechanics After Medial Meniscectomy Determined With a Poromechanical Model

The menisci play a vital role in the mechanical function of knee joint. Unfortunately, meniscal tears often occur. Meniscectomy is a surgical treatment for meniscal tears; however, mechanical changes in the knee joint after meniscectomy is a risk factor to osteoarthritis (OA). The objective of this study was to investigate the altered cartilage mechanics of different medial meniscectomies using a poromechanical model of the knee joint. The cartilaginous tissues were modeled as nonlinear fibril-reinforced porous materials with full saturation. The ligaments were considered as anisotropic hyperelastic and reinforced by a fibrillar collagen network. A compressive creep load of ¾ body weight was applied in full extension of the right knee during 200 s standing. Four finite element models were developed to simulate different meniscectomies of the joint using the intact model as the reference for comparison. The modeling results showed a higher load support in the lateral than medial compartment in the intact joint, and the difference in the load share between the compartments was augmented with medial meniscectomy. Similarly, the contact and fluid pressures were higher in the lateral compartment. On the other hand, the medial meniscus in the normal joint experienced more loading than the lateral one. Furthermore, the contact pressure distribution changed with creep, resulting in a load transfer between cartilage and meniscus within each compartment while the total load born by the compartment remained unchanged. This study has quantified the altered contact mechanics on the type and size of meniscectomies, which may be used to understand meniscal tear or support surgical decisions.

Which Patients Require a Contralateral Total Knee Arthroplasty Within 5 Years of Index Surgery?

Osteoarthritis (OA) of the knee often presents bilaterally. However, not all patients with severe bilateral knee OA require bilateral total knee arthroplasty (TKA). This study aims to identify predictive factors for contralateral TKA in patients presenting with severe bilateral knee OA undergoing unilateral TKA. We prospectively collected perioperative data from 209 consecutive patients of a single surgeon who had severe bilateral OA knees at presentation. All patients underwent unilateral TKA on the more symptomatic knee. Patients were then stratified by their need for a contralateral TKA within the next 5 years. Using regression analysis, we compared patients who underwent contralateral knee surgery within 5 years (n = 115) against patients who did not (n = 94), so as to create a predictive model. Significant factors identified by the multiple regression models were incorporated into a decision tree using classification and regression tree analysis. Body mass index (BMI), degree of varus angulation, and Oxford knee scores were identified as significant predictive factors. The generated decision tree model was able to stratify patients according to their BMI and Oxford scores into four subgroups, the highest with more than 90% odds of contralateral surgery and the lowest with less than 40% odds of contralateral surgery. BMI, degree of varus angulation, and preoperative Oxford knee scores seem to predict the need for contralateral TKA in patients with severe bilateral OA knees undergoing unilateral TKA. These patients should be counseled on their requirement for the second TKA based on these factors.

Biomechanical effect of tibial slope on the stability of medial unicompartmental knee arthroplasty in posterior cruciate ligament-deficient knees

Aims

Unicompartmental knee arthroplasty (UKA) has become a popular method of treating knee localized osteoarthritis (OA). Additionally, the posterior cruciate ligament (PCL) is essential to maintaining the physiological kinematics and functions of the knee joint. Considering these factors, the purpose of this study was to investigate the biomechanical effects on PCL-deficient knees in medial UKA.

Methods

Computational simulations of five subject-specific models were performed for intact and PCL-deficient UKA with tibial slopes. Anteroposterior (AP) kinematics and contact stresses of the patellofemoral (PF) joint and the articular cartilage were evaluated under the deep-knee-bend condition.

Results

As compared to intact UKA, there was no significant difference in AP translation in PCL-deficient UKA with a low flexion angle, but AP translation significantly increased in the PCL-deficient UKA with high flexion angles. Additionally, the increased AP translation became decreased as the posterior tibial slope increased. The contact stress in the PF joint and the articular cartilage significantly increased in the PCL-deficient UKA, as compared to the intact UKA. Additionally, the increased posterior tibial slope resulted in a significant decrease in the contact stress on PF joint but significantly increased the contact stresses on the articular cartilage.

Conclusion

Our results showed that the posterior stability for low flexion activities in PCL-deficient UKA remained unaffected; however, the posterior stability for high flexion activities was affected. This indicates that a functional PCL is required to ensure normal stability in UKA. Additionally, posterior stability and PF joint may reduce the overall risk of progressive OA by increasing the posterior tibial slope. However, the excessive posterior tibial slope must be avoided.

Cite this article: Bone Joint Res 2020;9(9):593–600.

Medial unicompartmental knee arthroplasty to patients with a ligamentous deficiency can cause biomechanically poor outcomes

PURPOSE

The aims of this study were to investigate the biomechanical effects of the deficiency of the collateral ligament and cruciate ligament in medial unicompartmental knee arthroplasty in normal and varus knee patients using computational simulation.

METHODS

Validated finite-element (FE) models for conditions of various cruciate and collateral ligament deficiencies were developed to evaluate the biomechanical effects of ligamentous deficiency in UKA for normal and varus knee patients. Contact stresses on the polyethylene (PE) insert, contact stresses on the lateral articular cartilage, and quadriceps force were analyzed under gait-loading conditions.

RESULTS

Contact stresses on the PE insert and lateral articular cartilage as well as quadriceps force in a normal knee UKA FE model were increased in the order of anterior cruciate ligament (ACL) deficiency, medial collateral ligament (MCL) deficiency, lateral collateral ligament (LCL) deficiency, and posterior cruciate ligament (PCL) deficiency in the stance phase of gait cycle, as compared with those in the model without ligamentous deficiency. In two or more multiple ligamentous deficiencies, contact stresses on the PE insert and articular lateral cartilage and quadriceps force were significantly increased versus in the case of single-ligament deficiency.

CONCLUSION

Poor outcomes of medial UKA in patients with ACL or MCL deficiency can be predicted. Care should be taken to extend the indications when performing medial UKA in patients with ligamentous deficiency, especially when varus knee with ACL or MCL deficiency is present.

A biomechanical analysis of 3D stress and strain patterns in patellar tendon during knee flexion

Patellar tendinopathy is among the most widespread patellar tendon diseases in athletes that participate in activities involving running and jumping. Although their symptoms can be detected, especially at the inferior pole of the patella, their biomechanical cause remains unknown. In this study, a three-dimensional finite element model of knee complex was developed to investigate principal stress and strain distributions in the patellar tendon during 0° to 90° knee flexion and slow and fast level-ground walking. Results indicate that the patellar tendon is subjected to tensile stress and strains during all three activities. During flexion, its central proximal posterior region exhibited highest peak stress and strain, followed by central distal posterior, central distal anterior and central proximal anterior region. Similar trends and magnitudes were reported during slow and fast walking. The region with highest principal stresses and strains, central proximal anterior region, also corresponds to the most commonly reported patellar tendinopathy lesion site, suggesting that principal stress and strain are good indicators of lesion site location. Additional factors such as regional variations in material properties and frequency and duration of cyclic loading also need to be considered when determining the biomechanical aetiology of patellar tendinopathy.

Restoration of normal knee kinematics with respect to tibial insert design in mobile bearing lateral unicompartmental arthroplasty using computational simulation

Aims

Mobile-bearing unicompartmental knee arthroplasty (UKA) with a flat tibial plateau has not performed well in the lateral compartment, leading to a high rate of dislocation. For this reason, the Domed Lateral UKA with a biconcave bearing was developed. However, medial and lateral tibial plateaus have asymmetric anatomical geometries, with a slightly dished medial and a convex lateral plateau. Therefore, the aim of this study was to evaluate the extent at which the normal knee kinematics were restored with different tibial insert designs using computational simulation.

Methods

We developed three different tibial inserts having flat, conforming, and anatomy-mimetic superior surfaces, whereas the inferior surface in all was designed to be concave to prevent dislocation. Kinematics from four male subjects and one female subject were compared under deep knee bend activity.

Results

The conforming design showed significantly different kinematics in femoral rollback and internal rotation compared to that of the intact knee. The flat design showed significantly different kinematics in femoral rotation during high flexion. The anatomy-mimetic design preserved normal knee kinematics in femoral rollback and internal rotation.

Conclusion

The anatomy-mimetic design in lateral mobile UKA demonstrated restoration of normal knee kinematics. Such design may allow achievement of the long sought normal knee characteristics post-lateral mobile UKA. However, further in vivo and clinical studies are required to determine whether this design can truly achieve a more normal feeling of the knee and improved patient satisfaction.

Cite this article: Bone Joint Res 2020;9(7):421–428.

A patient-specific numerical model of the ankle joint for the analysis of contact pressure distribution

A patient-specific numerical model of the ankle joint has been developed using open-source software with realistic material properties that mimics the physiological movement of the foot during the stance phase of the gait cycle. The patient-specific ankle geometry has been segmented as a castellated surface using 3DSlicer from the computed tomography image scans of a subject with no congenital or acquired pathology; subsequently, the bones are smoothed, and cartilage is included as a uniform thickness extruded layer. A high-resolution Cartesian mesh has been generated using cfMesh. The material properties are assigned in the model based on the CT image Hounsfield intensities and compared to a sandwich-based material model. Gait data of the same subject was obtained and used to relatively position the tibia, talus, and calcaneus bones in the model. The stance phase of the gait cycle is simulated using a cell-centred finite-volume method implemented in open-source software OpenFOAM. The predicted peak contact pressures occur in the range of 4.85-5.53 MPa with average pressures in the range of 1.56-1.95 MPa, and the contact area ranges between 429 and 707.8 mm² for the entire stance phase with the mid-stance phase predicting the maximum contact area. These predictions are in agreement with results from the literature. The effect of arthritis on the contact characteristics of the ankle joint has also been examined. A concentrated increase in pressure was predicted that could be manifested as pain, thereby leading to reduced motion in the ankle. The model, with continued development, has the capability to understand the effect of joint degradation and furthermore, could help provide a tool to predict the efficiency of therapeutic surgical procedures as well as guide the development of next generation ankle prostheses. The work would be made available in the University College Dublin depository (https://github.com/laxmimurali/anklejoint) as well as research gate once the article has been published.

Finite Element Study on the Preservation of Normal Knee Kinematics with Respect to the Prosthetic Design in Patient-Specific Medial Unicompartmental Knee Arthroplasty

Alterations in native knee kinematics in medial unicompartmental knee arthroplasty (UKA) are caused by the nonanatomic articular surface of conventional implants. Technology for an anatomy mimetic patient-specific (PS) UKA has been introduced. However, there have been no studies on evaluating the preservation of native knee kinematics with respect to different prosthetic designs in PS UKA. The purpose of this study was to evaluate the preservation of native knee kinematics with respect to different UKA designs using a computational simulation. We evaluated three different UKA designs: a nonconforming design, an anatomy mimetic design, and a conforming design for use under gait and squat loading conditions. The results show that the anatomy mimetic UKA design achieves closer kinematics to those of a native knee compared to the other two UKA designs under such conditions. The anatomy memetic UKA design exhibited a 0.39 mm and 0.36° decrease in the translation and rotation, respectively, in the swing phase compared with those of the natural knee. In addition, under the gait and squat loading conditions, the conforming UKA design shows limited kinematics compared to the nonconforming UKA design. Our results show that the conformity of each component in PS UKA is an important factor in knee joint kinematics; however, the anatomy mimetic UKA design cannot restore perfect native kinematics.

Slower Walking Speed Is Related to Early Femoral Trochlear Cartilage Degradation After ACL Reconstruction

Post-traumatic patellofemoral osteoarthritis (OA) is prevalent after anterior cruciate ligament reconstruction (ACLR) and early cartilage degradation may be especially common in the femoral trochlear cartilage. Determining the presence of and factors associated with early femoral trochlear cartilage degradation, a precursor to OA, is a critical preliminary step in identifying those at risk for patellofemoral OA development and designing interventions to combat the disease. Early cartilage degradation can be detected using quantitative magnetic resonance imaging measures, such as tissue T₂ relaxation time. The purposes of this study were to (i) compare involved (ACLR) versus uninvolved (contralateral) femoral trochlear cartilage T₂ relaxation times 6 months after ACLR, and (ii) determine the relationship between walking speed and walking mechanics 3 months after ACLR and femoral trochlear cartilage T₂ relaxation times 6 months after ACLR. Twenty-six individuals (age 23 ± 7 years) after primary, unilateral ACLR participated in detailed motion analyses 3.3 ± 0.6 months after ACLR and quantitative magnetic resonance imaging 6.3 ± 0.5 months after ACLR. There were no limb differences in femoral trochlear cartilage T₂ relaxation times. Slower walking speed was related to higher (worse) femoral trochlear cartilage T₂ relaxation times in the involved limb (Pearson's r: -0.583, p = 0.002) and greater interlimb differences in trochlear T₂ relaxation times (Pearson's r: -0.349, p = 0.080). Walking mechanics were weakly related to trochlear T₂ relaxation times. Statement of clinical significance: Slower walking speed was by far the strongest predictor of worse femoral trochlear cartilage health, suggesting slow walking speed may be an early clinical indicator of future patellofemoral OA after ACLR. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:645-652, 2020.

EMG-Assisted Muscle Force Driven Finite Element Model of the Knee Joint with Fibril-Reinforced Poroelastic Cartilages and Menisci

Abnormal mechanical loading is essential in the onset and progression of knee osteoarthritis. Combined musculoskeletal (MS) and finite element (FE) modeling is a typical method to estimate load distribution and tissue responses in the knee joint. However, earlier combined models mostly utilize static-optimization based MS models and muscle force driven FE models typically use elastic materials for soft tissues or analyze specific time points of gait. Therefore, here we develop an electromyography-assisted muscle force driven FE model with fibril-reinforced poro(visco)elastic cartilages and menisci to analyze knee joint loading during the stance phase of gait. Moreover, since ligament pre-strains are one of the important uncertainties in joint modeling, we conducted a sensitivity analysis on the pre-strains of anterior and posterior cruciate ligaments (ACL and PCL) as well as medial and lateral collateral ligaments (MCL and LCL). The model produced kinematics and kinetics consistent with previous experimental data. Joint contact forces and contact areas were highly sensitive to ACL and PCL pre-strains, while those changed less cartilage stresses, fibril strains, and fluid pressures. The presented workflow could be used in a wide range of applications related to the aetiology of cartilage degeneration, optimization of rehabilitation exercises, and simulation of knee surgeries.

EMG-Assisted Muscle Force Driven Finite Element Model of the Knee Joint with Fibril-Reinforced Poroelastic Cartilages and Menisci

Abnormal mechanical loading is essential in the onset and progression of knee osteoarthritis. Combined musculoskeletal (MS) and finite element (FE) modeling is a typical method to estimate load distribution and tissue responses in the knee joint. However, earlier combined models mostly utilize static-optimization based MS models and muscle force driven FE models typically use elastic materials for soft tissues or analyze specific time points of gait. Therefore, here we develop an electromyography-assisted muscle force driven FE model with fibril-reinforced poro(visco)elastic cartilages and menisci to analyze knee joint loading during the stance phase of gait. Moreover, since ligament pre-strains are one of the important uncertainties in joint modeling, we conducted a sensitivity analysis on the pre-strains of anterior and posterior cruciate ligaments (ACL and PCL) as well as medial and lateral collateral ligaments (MCL and LCL). The model produced kinematics and kinetics consistent with previous experimental data. Joint contact forces and contact areas were highly sensitive to ACL and PCL pre-strains, while those changed less cartilage stresses, fibril strains, and fluid pressures. The presented workflow could be used in a wide range of applications related to the aetiology of cartilage degeneration, optimization of rehabilitation exercises, and simulation of knee surgeries.

Mechanical characterization of the ligaments in subject-specific models of the patellofemoral joint using in vivo laxity tests

BACKGROUND

The purpose of this study was to propose a methodology for mechanical characterization of the ligaments in subject-specific models of the patellofemoral joint (PFJ) of living individuals.

METHOD

PFJ laxity tests were performed on a healthy volunteer using a specially designed loading apparatus under biplane fluoroscopy. A three-dimensional (3D) parametric model of the PFJ was developed in the framework of the rigid body spring model using the geometrical data acquired from the subject's computed tomography and magnetic resonance images. The stiffness and pre-strains of the medial and lateral PFJ ligaments were characterized using a two-step optimization procedure which minimized the deviation between the model predictions and the calibration test results. Sensitivity analyses were performed to investigate the effect of mechanical properties of the non-characterized model components on the characterization procedure and its results.

RESULTS

The overall findings indicate that the proposed methodology is applicable and can improve the model predictions effectively. For the subject under study, ligament characterization reduced the root mean square of the deviations between the patellar shift and tilt predicted by the model and obtained experimentally for the validation laxity test (from 6.2 mm to 0.5 mm, and from 8.4° to 1.5°, respectively) and passive knee flexion test (from 1.4 mm to 0.3 mm, and from 2.3° to 1.3°, respectively). The non-characterized mechanical properties were found to have a minimal effect on the characterization procedure and its results.

CONCLUSION

The proposed methodology can help in developing truly patient-specific models of the PFJ, to be used for personalized preplanning of the clinical interventions.

Effect of sagittal femoral component alignment on biomechanics after mobile-bearing total knee arthroplasty

BACKGROUND

Recently, there has been increasing interest in mobile-bearing total knee arthroplasty (TKA). However, changes in biomechanics with respect to femoral component alignment in mobile-bearing TKA have not been explored in depth. This study aims to evaluate the biomechanical effect of sagittal alignment of the femoral component in mobile-bearing TKA.

METHODS

We developed femoral sagittal alignment models with - 3°, 0°, 3°, 5°, and 7°. We also examined the kinematics of the tibiofemoral (TF) joint, contact point on the TF joint, contact stress on the patellofemoral (PF) joint, collateral ligament force, and quadriceps force using a validated computational model under a deep-knee-bend condition.

RESULTS

Posterior kinematics of the TF joint increased as the femoral component flexed. In addition, contact stress on the PF joint, collateral ligament force, and quadriceps force decreased as the femoral component flexed. The results of this study can assist surgeons in assessing risk factors associated with femoral component sagittal alignment for mobile-bearing TKA.

CONCLUSIONS

Our results showed that slight flexion implantation may be an effective alternative technique because of its advantageous biomechanical effect. However, excessive flexion should be avoided because of potential loosening of the TF joint.

In vivo attachment site to attachment site length and strain of the ACL and its bundles during the full gait cycle measured by MRI and high-speed biplanar radiography

The purpose of this study was to measure in vivo attachment site to attachment site lengths and strains of the anterior cruciate ligament (ACL) and its bundles throughout a full cycle of treadmill gait. To obtain these measurements, models of the femur, tibia, and associated ACL attachment sites were created from magnetic resonance (MR) images in 10 healthy subjects. ACL attachment sites were subdivided into anteromedial (AM) and posterolateral (PL) bundles. High-speed biplanar radiographs were obtained as subjects ambulated at 1 m/s. The bone models were registered to the radiographs, thereby reproducing the in vivo positions of the bones and ACL attachment sites throughout gait. The lengths of the ACL and both bundles were estimated as straight line distances between attachment sites for each knee position. Increased attachment to attachment ACL length and strain were observed during midstance (length = 28.5 ± 2.6 mm, strain = 5 ± 4%, mean ± standard deviation), and heel strike (length = 30.5 ± 3.0 mm, strain = 12 ± 5%) when the knee was positioned at low flexion angles. Significant inverse correlations were observed between mean attachment to attachment ACL lengths and flexion (rho = -0.87, p < 0.001), as well as both bundle lengths and flexion (rho = -0.86, p < 0.001 and rho = -0.82, p < 0.001, respectively). AM and PL bundle attachment to attachment lengths were highly correlated throughout treadmill gait (rho = 0.90, p < 0.001). These data can provide valuable information to inform design criteria for ACL grafts used in reconstructive surgery, and may be useful in the design of rehabilitation and injury prevention protocols.

Measures of Agility and Single-Legged Balance as Clinical Assessments in Patients With Anterior Cruciate Ligament Reconstruction and Healthy Individuals

CONTEXT

Current clinical assessments used for patients with anterior cruciate ligament reconstruction (ACLR) may not enable clinicians to properly identify functional deficits that have been found in laboratory studies. Establishing muscular-function assessments, through agility and balance tasks, that can properly differentiate individuals with ACLR from healthy, active individuals may permit clinicians to detect deficits that increase the risk for poor outcomes.

OBJECTIVE

To compare lower extremity agility and balance between patients with ACLR and participants serving as healthy controls.

DESIGN

Case-control study.

SETTING

Controlled laboratory.

PATIENTS OR OTHER PARTICIPANTS

A total of 47 volunteers in 2 groups, ACLR (9 males, 11 females; age = 23.28 ± 5.61 years, height = 173.52 ± 8.89 cm, mass = 70.67 ± 8.89 kg) and control (13 males, 12 females; age = 23.00 ± 6.44, height = 172.50 ± 9.24, mass = 69.81 ± 10.87 kg).

MAIN OUTCOME MEASURE(S)

Participants performed 3 timed agility tasks: Agility T Test, 17-hop test, and mat-hopping test. Balance was assessed in single-legged (SL) stance in 3 positions (straight knee, bent knee, squat) on 2 surfaces (firm, foam) with the participants' eyes open or closed for 10-second trials. Agility tasks were measured for time to completion. Eyes-open balance tasks were measured using center-of-pressure average velocity, and eyes-closed balance tasks were measured using the Balance Error Scoring System.

RESULTS

For the Agility T Test, the ACLR group had slower times than the control group (P = .05). Times on the Agility T Test demonstrated moderate to strong positive relationships for unipedal measures of agility. The ACLR group had greater center-of-pressure average velocity in the SL bent-knee position than the control group. No differences were found between groups for the SL straight-knee and SL-squat balance tasks (P > .05). No differences in errors were present between groups for the eyes-closed balance tasks (P > .05).

CONCLUSIONS

The ACLR group demonstrated slower bipedal agility times and decreased postural stability when assessed in an SL bent-knee position compared with the control group.

Biomechanical influence of lateral meniscal allograft transplantation on knee joint mechanics during the gait cycle

Background

This study evaluated the influence of meniscal allograft transplantation (MAT) on knee joint mechanics during normal walking using finite element (FE) analysis and biomechanical data.

Methods

The study included 20 patients in a transpatellar group and 25 patients in a parapatellar group. Patients underwent magnetic resonance imaging (MRI) evaluation after lateral MAT as a baseline input for three-dimensional (3D) and FE analyses. Three different models were compared for lateral MAT: intact, transpatellar approach, and parapatellar approach. Analysis was performed using high kinematic displacement and rotation inputs based on the kinematics of natural knees. ISO standards were used for axial load and flexion. Maximum contact stress on the grafted menisci and maximum shear stress on the articular surface of the knee joint were evaluated with FE analysis.

Results

Relatively high maximum contact stresses and maximum shear stresses were predicted in the medial meniscus and cartilage of the knee joint during the loading response for all three knee joint models. Maximum contact stress and maximum shear stress in the meniscus and cartilage increased on the lateral side after lateral MAT, especially during the first 20% of the stance phase of the gait cycle. The transpatellar approach was most similar to the intact knee model in terms of contact stresses of the lateral grafted and medial meniscus, as well as maximum shear stresses during the gait cycle. In addition, the transpatellar model had lower maximum contact stress on the menisci than did the parapatellar model, and it also had lower maximum shear stress on the tibial cartilage.

Conclusions

Therefore, the transpatellar approach may reduce the overall risk of degenerative osteoarthritis (OA) after lateral MAT.

Biomechanical analysis of a changed posterior condylar offset under deep knee bend loading in cruciate-retaining total knee arthroplasty

BACKGROUND

The conservation of the joint anatomy is an important factor in total knee arthroplasty (TKA). The restoration of the femoral posterior condylar offset (PCO) has been well known to influence the clinical outcome after TKA.

OBJECTIVE

The purpose of this study was to determine the mechanism of PCO in finite element models with conservation of subject anatomy and different PCO of ±1, ±2, ±3 mm in posterior direction using posterior cruciate ligament-retaining TKA.

METHODS

Using a computational simulation, we investigated the influence of the changes in PCO on the contact stress in the polyethylene (PE) insert and patellar button, on the forces on the collateral and posterior cruciate ligament, and on the quadriceps muscle and patellar tendon forces. The computational simulation loading condition was deep knee bend.

RESULTS

The contact stresses on the PE insert increased, whereas those on the patellar button decreased as posterior condylar offset translated to the posterior direction. The forces exerted on the posterior cruciate ligament and collateral ligaments increased as PCO translated to the posterior direction. The translation of PCO in the anterior direction, in an equivalent flexion angle, required a greater quadriceps muscle force.

CONCLUSIONS

Translations of the PCO in the posterior and anterior directions resulted in negative effects in the PE insert and ligament, and the quadriceps muscle force, respectively. Our findings suggest that orthopaedic surgeons should be careful with regard to the intraoperative conservation of PCO, because an excessive change in PCO may lead to quadriceps weakness and an increase in posterior cruciate ligament tension.