Hydrothermal treatments of rice starch for improvement of rice noodle quality

Effects of cold plasma pretreatment before different drying process on the structural and functional properties of starch in Chinese yam

This article compared the effects of hot air drying (HAD), infrared drying (IRD), and cold plasma (CP) as a pretreatment on the structure, quality, and digestive characteristics of starch extracted from yam. As the most commonly used drying method, HAD was used as a control. SEM and CLSM images showed that all treatments preserve the integrity of the yam starch. CP caused some cracks and breaks in the starch granules. IRD did not destroy the crystal structure of starch molecules, but made the spiral structure tighter and increased short-range orderliness. However, CP led to the depolymerization and dispersion of starch molecular chains, resulting in a decrease in average molecular weight and relative crystallinity. These molecular conformation changes caused by different processes led to differences in solubility, swelling power, pasting parameters, digestion characteristics, and functional characteristics. This study provided an important basis for the reasonable drying preparation and utilization of yam starch.

Quantification of resistant starch content in rice after hydrothermal treatments using terahertz spectroscopy

Since hydrothermal treatments can enhance resistant starch (RS) content in rice and provide health benefits when consumed, a less laborious and non-destructive method to determine RS content is needed. Terahertz (THz) spectroscopy is hypothesized as a suitable method to quantify RS content in rice after hydrothermal treatment with its sensitivity for the intermolecular forces increase in the formation of RS. In this study, we first used the traditional in vitro hydrolysis method to determine the content of RS in rice. Then, the potential of starch absorbance peaks to quantify RS content after three commonly used hydrothermal methods, soaking, mild heat-moisture treatment, and parboiling, was investigated. The second derivative intensities of the peak at 9.0, 10.5, 12.1, and 13.1 THz were confirmed as being correlated with RS content and showed the high accuracy to predict RS content in samples (R2 > 0.96). Our results indicate the RS content of hydrothermally treated rice can be accurately quantified using these peaks.

Effects of soaking glutinous sorghum grains on physicochemical properties of starch

Glutinous sorghum grains were soaked (60-80 °C, 2-8 h) to explore the effects of soaking, an essential step in industrial processing of brewing, on starch. As the soaking temperature increased, the peak viscosity and crystallinity of starch gradually decreased, while the enzymatic hydrolysis rate and storage modulus first increased and then decreased. At 70 °C, the content of amylose, the enzymatic hydrolysis rate of starch, and the final viscosity first increase and then decrease with the increase of soaking time, reaching their maximum at 6 h, increased by 53.1 %, 11.0 %, and 10.4 %, respectively, as compared with the non-soaked sample. At 80 °C (4 h), the laser confocal microscopy images showed a network structure formed between the denatured protein chains and the leached-out amylose chains. The molecular weights of starch before and after soaking were all in the range of 3.82-8.98 × 107 g/mol. Since 70 °C is lower than that of starch gelatinization and protein denaturation, when soaking for 6 h, the enzymatic hydrolysis rate of starch is the highest, and the growth of miscellaneous bacteria is inhibited, which is beneficial for subsequent processing technology. The result provides a theoretical basis for the intelligent control of glutinous sorghum brewing.

Rice starch modification by thermal treatments with avocado oil: Autoclave versus microwave methods

This study aimed to evaluate the physical and chemical alterations in rice starch modified by heat-moisture treatment (HMT) using an autoclave and a microwave, in association with avocado oil (AO), and evaluate the effects on thermal and structural properties, in vitro digestibility, and estimated glycemic index (eGI). Samples were adjusted to 30 % (w/w) moisture and 2, 4 and 8 % AO. HMT was conducted at 110 °C for 1 h in the autoclave (A0%, A2%, A4%, and A8%) and at 50 °C for 3 min in the microwave (M0%, M2%, M4%, and M8%). Both procedures did not alter the starch crystallinity pattern (type-A). Pasting viscosity, setback, relative crystallinity, and gelatinisation enthalpy decreased as the AO content increased in both HMT processes. The M8% showed reduced digestibility, decreased eGI (72.99, p < 0.05), and lower starch hydrolysis concentration (62.75 %, p < 0.05). The application of HMT with the addition of AO may be an interesting process for obtaining resistant starch since its content increased after both treatments (A8%, M4%, and M8%). The microwave process proved efficient, making it possible to use a lower temperature, less time, and less energy for modification and obtain starches with improved characteristics.

Enhanced gelling property and freeze-thaw stability of potato, tapioca and corn starches modified by mild heating in aqueous ethanol solution

BACKGROUND

Physically modified starches can be classified as natural ingredients on food labels and clean label products. Thus, the market demand for physically modified starch is increasing. Potato, tapioca and corn starches were physically modified by mild heat treatment in an alcoholic solution to enhance their gelling property and freeze-thaw stability.

RESULTS

During mild heating of starch suspension (40% w/w) in 10% ethanol solution at the onset gelatinization temperature, granular swelling of starch occurred, followed by amylose leaching with medication of the surface structure of the starch granules. All treated starches exhibited increased gelatinization and pasting temperatures and decreased breakdown for pasting as a result of improved stability against shear and heat. The treated starches had higher hardness, cohesiveness and springiness of gel than the respective native starches, and these gel properties were more pronounced in potato starch than in tapioca and corn starches. The treated starches showed substantially reduced gel syneresis during freeze-thawing.

CONCLUSION

Physical modification of starch by mild heat treatment in an alcoholic solution substantially improved its gelation ability and freeze-thaw stability. © 2024 Society of Chemical Industry.

Heat-moisture-treated rice starches with different amylose and moisture contents as stabilizers for nonfat yogurt

Food producers are interested in enhancing native starch properties without chemical modifications. Here, rice starches were physically modified via heat-moisture treatment (HMT) using different amylose (high, medium, low, and waxy) and moisture (15 %, 20 %, 25 %, and 30 %) contents. Hydration properties and pasting viscosities differed for different amylose and moisture contents. The HMT starch with high amylose content and 15 % moisture (High_HMT15) exhibited the highest final viscosity (6.16 Pa.s), and 31.7 % and 35.1 % increased amount of resistant starch compared to native starch in the granule and paste states, respectively. Hence, High_HMT15 was used as a stabilizer for nonfat yogurt. The nonfat yogurt prepared with 1.0 % High_HMT15 as the stabilizer exhibited 37.3 % reduced whey separation, 2.8 times increased viscosity, a high total solids content, and acceptable sensory properties compared to the nonfat yogurt without starch. These HMT starches can replace chemically modified starches derived from other grains in various food applications.

Mechanistic insights into the enhanced texture of potato noodles by incorporation of small granule starches

Potato noodles are a popular food due to their unique texture and taste, but native potato starch often fails to meet consumer demands for precise textural outcomes. The effect of blending small granule (waxy amaranth, non-waxy oat and quinoa) starch with potato starch on the properties of noodles was investigated to enhance quality of noodles. Morphological results demonstrated that small granule starch filled gaps between potato starch granules, some of which gelatinized incompletely. Meanwhile, XRD and FTIR analysis indicated that more ordered structures and hydrogen bonding among starch granules increased with addition of small granule starch. The addition of oat or quinoa starch increased gel elasticity, decreased viscosity of the pastes, and increased the tensile strength of noodles, while addition of 30 % and 45 % waxy amaranth starch did not increase G' value of gel or tensile strength of noodles. These results indicated that amylose molecules played an important role during retrogradation, and may intertwine and interact with each other to enhance the network structure of starch gel in potato starch blended with oat or quinoa starch. This study provides a natural way to modify potato starch for desirable textural properties of noodle product.

Characteristics of rice starches modified by single and dual heat moisture and osmotic pressure treatments

The effect of osmotic pressure treatment (OPT), heat moisture treatment (HMT), and their dual combination as HMT-OPT and OPT-HMT on functional and pasting properties, gel texture, crystallinity, thermal, morphological, and rheological properties, and in vitro digestibility of modified starches were investigated. HMT was done with 29 % moisture at 111 °C for 45 min while OPT was performed at 117 °C for 35 min with saturated sodium sulphate solution. All modifications increased amylose content, improved pasting stability, and reduced swelling power and solubility. Dual modifications caused higher morphological changes than single modified starches. HMT and OPT increased pasting temperature, setback and final viscosity while decreased peak viscosity and breakdown, whereas HMT-OPT and OPT-HMT reduced all pasting parameters except pasting temperature. 1047/1022 and 995/1022 ratios and relative crystallinity decreased. V-type polymorphs were formed, and gelatinization temperature range increased with lower gelatinization enthalpy. Starch gel elasticity, RS and SDS content were enhanced to a greater extent after HMT-OPT and OPT-HMT. HMT as a single and dual form with OPT showed prominent effect on pasting, thermal, crystalline, and rheological properties. Application of HMT, OPT and dual modified starches with improved functionalities may be targeted for suitable food applications such as noodles.

Hydrothermal treatments of starch impact reaction patterns during subsequent chemical derivatization

Differences in derivatization patterns (using a fluorescent reagent, fluorescein isothiocyanate) of wheat, pea, and potato starches between native granular (NAT) starches and their respective annealed (ANN) and heat-moisture treated (HMT) starches were investigated to reveal structural changes associated with starch hydrothermal treatments. Size-exclusion chromatography with fluorescence and refractive index detection assessed the reactivity of amylose (AM), intermediate chains (IM1 and IM2), and amylopectin branch chains (AP1, AP2, and AP3) within the different starches. Shifts in X-ray diffraction patterns of HMT starches and in the gelatinization properties of both ANN and HMT starches confirmed molecular rearrangement. The reaction homogeneity (wheat and pea) and the overall extent of reaction (pea and potato) increased for HMT starches compared to other starches. The lower reactivities of IM2 chains (HMT starch) and AP3 chains (ANN starch) relative to NAT starches, indicated their involvement in molecular rearrangements and improved double helical order. IM2 and AP branch chains in ANN pea starch also were less reacted than NAT starch chains, suggesting their co-crystallization. Molecular rearrangements in ANN and HMT starches led to altered swelling and pasting viscosities. Thus, changes in the relative crystallinity of individual starch branch chains induced by hydrothermal processing impact the final physical properties.

Influence of oxidation, acetylation and hydrothermal treatment on structure and functionality of common buckwheat starch

The set aim of present work was to investigate the effects of acetylation, oxidation and heat moisture treatment on physicochemical, pasting, gel texture, structural, thermal and morphological properties of common buckwheat starch. Swelling power and solubility of starches reduced after modification except acetylation. Color of buckwheat starch improved after oxidation and acetylation. Paste clarity increased while syneresis reduced following modification with the exception of oxidation. Pasting properties of buckwheat starch revealed increased peak viscosity and breakdown viscosity following modification treatments. Gel texture analysis depicted increased hardness and reduced springiness, chewiness and cohesiveness for modified starches of buckwheat. Diffractograms of starches showed variation in intensity of some bands. Heat moisture treatment increased agglomeration and oxidation caused slight depression on surface of some granules. Relative crystallinity reduced following oxidation and hydrothermal treatment of starch. The gelatinization temperatures were increased in hydrothermal treated starch samples while oxidation and acetylation reduced the gelatinization temperature. The findings of this work would favor the new applications of modified starch from common buckwheat.

Impact of moisture content on microstructural, thermal, and techno-functional characteristics of extruded whole-grain-based breakfast cereal enriched with Indian horse chestnut flour

The use of non-conventional seed flour is of interest in obtaining healthy breakfast cereals. The research aimed to study the physico-functional, bioactive, microstructure, and thermal characteristics of breakfast cereals using scanning electron microscopy, X-ray diffractometry, and differential scanning calorimeter. The increase in feed moisture content (16 %) enhanced the bulk density (5.24 g/mL), water absorption index (7.76 g/g), total phenolic content (9.03 mg GAE/g), and antioxidant activity (30.36 %) having desirable expansion rate (2.84 mm), water solubility index (48 %), and color attributes. The microstructure showed dense inner structures with closed air cells in extruded flours. Extrusion treatment rearranged the crystalline structure from A-type to V-type by disrupting the granular structure of starch, reducing its crystallinity, and promoting the formation of an amylose-lipid complex network. Increasing conditioning moisture enhanced the degree of gelatinization (%), peak gelatinization temperature (Tp), and starch crystallinity (%) and reduced the gelatinization enthalpy (ΔHG) and gelatinization temperature ranges. The results reported in this study will help industries to develop innovative and novel food products containing functional ingredients.

Humidity-controlled heat treatment of fresh spinach noodles for color preservation and storage quality improvement

The high sensitivity to color browning during room-temperature storage was a significant factor in limiting the development of fresh spinach noodles (FSN). The practice of humidity-controlled heat treatment (HCHT) at varying temperatures, relative humidity, and time was carried out to limit enzyme activity and improve the quality of FSN. Results showed that HCHT could maximize the color preservation of fresh spinach noodle quality while effectively inactivating polyphenol oxidase and the yeasts, and mold count in FSN during storage was almost undetectable after mild conditions (80 °C). The hardness and chewiness of HCHT noodles were significantly increased, but the free sulfhydryl content was reduced. At 80 °C, 90 %, 5 min, protein structural aggregation was found in the microstructure of HCHT fresh spinach noodles. HCHT also caused partial gelatinization, as evidenced by the decrease in starch gelatinization enthalpy from 5.49 to 4.77 J/g, although the gelatinization degree of FSN was comparatively low.

Altering structure and enzymatic resistance of high-amylose maize starch by irradiative depolymerization and annealing with palmitic acid as V-type inclusion compound

This study explored a new physical modification approach to regulate enzymatic resistance of high-amylose starch for potentially better nutritional outcomes. High-amylose maize starch (HAMS) was subjected to chain depolymerization by electron beam irradiation (EBI), followed by inducing ordered structure through annealing in palmitic acid solution (APAS). APAS treatment significantly promotes the formation of ordered structure. Starch after the combinative modification showed up to 5.2 % increase in total crystallinity and up to 1.2 % increase in V-type fraction. The EBI-APAS modification led to increased gelatinization temperature (from 66.1 to 87.6 °C) and reduced final digested percentage under in vitro stimulated digestion conditions. The moderate extent of depolymerization resulted in higher enzymatic resistance, indicating that the extent of depolymerization is crucial in EBI-APAS modification. Pearson analysis showed a significant correlation between gelatinization onset temperature and digestion kinetic parameter (k1, rate constant of fast-phase digestion). Overall, the result suggests that ordered structures of degraded molecules induced by the combinative modification contribute to the enzymatic resistance of starch. This study sheds lights on future applications of EBI-APAS approach to regulate multi-scale structures and nutritional values of high-amylose starch.

Rice-Based Gluten-Free Foods and Technologies: A Review

Rice, one of the most widely consumed staples worldwide, serves as a versatile gluten-free substitute. However, review articles on technological developments in grain-free production focusing on rice are scarce. This review assesses various research results concerning the quality attributes of rice-based gluten-free foods, including bread, pasta, and beer. To optimize the key attributes in processed products, such as dough leavening in bread and the physical and cooking properties of noodles and pasta, research has focused on blending different gluten-free grains and incorporating additives that mimic the gluten function. Additionally, various processing technologies, such as starch preprocessing and extrusion puffing processes, have been employed to boost the quality of rice-based gluten-free products. Today, a variety of products, including bread, noodles, and beer, use rice as a partial replacement for barley or wheat. With rapid advancements in technology, a noticeable portion of consumers now shows a preference for products containing rice as a substitute. This trend indicates that rice-based gluten-free foods can be enhanced by leveraging the latest developments in gluten-free product technologies, particularly in countries where rice is a staple or is predominantly cultivated.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.

The Effect of Different Milling Methods on the Physicochemical and In Vitro Digestibility of Rice Flour

Preparation methods have been found to affect the physical and chemical properties of rice. This study prepared Guichao rice flour with wet, dry, semi-dry, and jet milling techniques. Differences in the particle size distribution of rice flour were investigated in order to assess their impact on pasting, thermal, gel, starch digestibility, and crystalline structure using an X-ray diffractometer (XRD) and a Rapid Visco Analyzer (RVA) across in vitro digestibility experiments. The results showed that semi-dry-milled rice flour (SRF) and wet-milled rice flour (WRF) were similar in damaged starch content, crystalline structure, and gelatinization temperature. However, compared with dry-milled rice flour (DRF) and jet-milled rice flour (JRF), SRF had less damaged starch, a higher absorption enthalpy value, and a higher gelatinization temperature. For starch digestibility, the extended glycemic index (eGI) values of WRF (85.30) and SRF (89.97) were significantly lower than those of DRF (94.47) and JRF (99.27). In general, the physicochemical properties and starch digestibility of WRF and SRF were better than those of DRF and JRF. SRF retained the advantages of WRF while avoiding the high energy consumption, high water consumption, and microbial contamination disadvantages of WRF and was able to produce better rice flour-associated products.

Impact of Starch Concentration on the Pasting and Rheological Properties of Gluten-Free Gels. Effects of Amylose Content and Thermal and Hydration Properties

The pasting and rheological properties of starch gels from different botanical origins have been widely used to evaluate the application of these starches in pharmaceutical and food products. However, the ways in which these properties are modified by starch concentration and their dependence on amylose content and thermal and hydration properties have not been adequately established so far. An exhaustive study of the pasting and rheological properties of starch gels (maize and rice (normal and waxy in both cases), wheat, potato, and tapioca) at concentrations of 6.4, 7.8, 9.2, 10.6, and 11.9 g/100 g was performed. The results were evaluated in terms of a potential equation fit between each parameter and each gel concentration. The parameters determined for the gels at the studied concentrations were correlated with the hydration properties and thermal properties by applying principal component analysis (PCA). Wheat starch, followed by normal maize and normal rice starches, presented a greater capacity to modulate their gels' pasting and viscoelastic properties via their concentration in water. On the contrary, the characteristics of waxy rice and maize, potato, and tapioca starches were barely modified by concentration in pasting assays, but the gels of potato and tapioca showed noticeable changes in their viscoelastic properties as functions of concentration. In the PCA plot, the non-waxy cereal samples (wheat, normal maize, and normal rice) were located close to each other. Wheat starch gels were the most dispersed on the graph, which is consistent with the high dependence on the concentration of the gel shown in most of the studied parameters. The waxy starches had close positions not too distant from those of the tapioca and potato samples and with little influence from amylose concentration. The potato and tapioca samples were close to the vectors of the crossover point in rheology and peak viscosity in their pasting properties. The knowledge gained from this work allows a better understanding of the effects of starch concentration on food formulations.

Physicochemical Properties and Tissue Structure of High Kernel Elongation Rice (Oryza sativa L.) Varieties as Affected by Heat Treatment

Heat treatment could affect the structure and properties of rice varieties. The present study was conducted in order to determine the effects of heat treatment on the physicochemical properties and tissue structure of Mahsuri Mutan, Basmati 370 and MR219 rice varieties. The three rice varieties were subjected to heat treatment (ageing) at 90 °C, using an oven, for 3 h. After the heat treatment, the samples were cooled at room temperature (25 °C) for 1 h. Physicochemical properties, such as alkali digestion value, water uptake ratio, solids in cooking water, high kernel elongation ratio and amylose contents, were determined. The procedure used in determining both apparent and absolute amylose involved measuring the iodine affinity of defatted whole starch. Ahigh-performance anion-exchange chromatograph was used to analyse branch chain length distribution of amylopectin quantitatively. The starch structure of the rice samples was observed under a scanning electron microscope. Data collected on physicochemical traits, heat treatment and control (ageing and non-ageing) were subjected to an analysis of variance using SAS software version 9.4. In this study, Mahsuri Mutan and Basmati 370 showed superior high kernel elongation as compared to their respective rice progenies. This study also found that heat treatment directly affected the increasingly high kernel elongation for both populations. The phenotypic correlation co-efficient indicated that there was a high positive correlation between high kernel elongation and water uptake ratio, implying that selection for water uptake ratio would increase the high kernel elongation characteristic. The heat treatment showed significant difference in all the physicochemical traits of the varieties studied. Heat treatment also affected the very long branch chains of starch, such as amylose. Observation under an electron microscope showed that the samples subjected to heat treatment had more cracks on the tissue structure compared to normal rice samples. The hexagon structure in Mahsuri Mutan produced a greater elongation effect on its kernel. The findings from this study could be useful to breeders in the selection and development of a new high kernel elongation rice variety.

Different Characteristics of Annealed Rice Kernels and Flour and Their Effects on the Quality of Rice Noodles

In this study, the characteristics of indica rice kernels (IRK) and flour (IRF) annealed in different conditions were evaluated, and the quality of rice noodles made with these IRK and IRF was determined. Native IRK and IRF were annealed in deionized water at a kernel or flour to water ratio of 1:3 (w/v) and temperatures of 50, 55, 60, and 65 °C for 12 and 24 h. Annealing increased the paste viscosity of IRK while decreasing that of IRF. Both annealed IRK and IRF exhibited increases in the gelatinization enthalpy change and relative crystallinity. Annealed IRK gel showed higher hardness, and annealed IRF gel displayed greater springiness. Unlike native rice noodles, annealed IRK noodles exhibited denser pores, while annealed IRF noodles exhibited a looser microstructure. With increasing annealing temperature and time, both annealed IRK and IRF noodles showed enhanced tensile properties. Rice noodles made from IRF annealed at 65 °C for 12 h exhibited a fracture strain of 2.7 times that of native rice noodles. In brief, IRK and IRF exhibited different degrees of susceptibility to annealing. Annealing had more significant effects on IRF than IRK. This study highlights the possibility of using annealed IRK and IRF in rice noodles.

Physicochemical, structural, and rheological characteristics of corn starch after thermal-ultrasound processing

Thermal-ultrasound treatment is a green technology that can significantly alter the structural and functional properties of starches. This research extend the effect of at different temperatures (25 °C, 45 °C, and 65 °C) and times (30 and 60 min) on the physicochemical, structural, and rheological properties of corn starch was studied. Amylose content, solubility, swelling power, and the least gelling content increased with increasing temperature and time. Starch treated at 45 °C for 30 min had the lowest syneresis among all treatments. Thermal-ultrasound treatment at 25 °C and 65 °C for 60 min caused increasing paste clarity. Microscopic observations demonstrated that the starch granules were agglomerated at 65 °C. Although the crystallinity of samples decreased from 35.42% to 8.94%, the storage modulus was more than the loss modulus during the frequency sweep test. Pasting properties showed that pasting temperatures shifted to higher values after treatment. Nonetheless, the maximum viscosity decreased, and the final viscosity of the treated samples demonstrated that short-term retrogradation could deteriorate. Results showed that thermal-ultrasound is a viable technique for starch modification compared to conventional thermal and ultrasound treatments.

Optimisation of the techno-functional and thermal properties of heat moisture treated Bambara groundnut starch using response surface methodology

This work optimised the techno-functional and thermal properties of heat moisture treated Bambara groundnut starch (BGS). A central composite rotatable design (Design-Expert software v8.0.1.0) comprising two independent factors of temperature and time was used. Extracted BGS were subjected to heat-moisture treatment (HMT) at 80-120 °C for 30-90 min at different moisture levels of 15% (HMT 15-BGS), 25% (HMT 25-BGS) and 35% (HMT 35-BGS). The optimum HMT conditions for BGS were found to be 80 °C for 30 min (HMT 15), 105.74 °C for 30 min (HMT 25), and 113.16 °C for 30 min (HMT 35). The desirability values of the obtained optimum conditions were 0.63 (HMT 15) and 1.00 (HMT 25 and 35). In HMT 35-BGS, water absorption capacity was significantly affected by the quadratic effect of temperature and time. In contrast, solubility was significantly affected by the linear effect of time and the quadratic effect of temperature. Temperature and treatment time had no significant effect (p ≥ 0.05) on the differential scanning calorimetry thermal properties of HMT 15, 25 and 35-BGS. Scanning electron micrographs of optimised BGS showed round and oval-shaped starch granules ranging from 4.2 to 4.7 mm (width) and 10 μm for length. Unmodified and optimised HMT-BGS showed characteristic FTIR bands linked with common starches. All BGS samples displayed multiple vibrations in the region below 1000 cm^-1 due to the skeletal vibrations of the glucose pyranose ring.

Starch-based noodles: Current technologies, properties, and challenges

Starch noodles are gaining interest due to the massive popularity of gluten-free foods. Modified starch is generally used for noodle production due to the functional limitations of native starches. Raw materials, methods, key processing steps, additives, cooking, and textural properties determine the quality of starch noodles. The introduction of traditional, novel, and natural chemical additives used in starch noodles and their potential effects also impacts noodle quality. This review summarizes the current knowledge of the native and modified starch as raw materials and key processing steps for the production of starch noodles. Further, this article aimed to comprehensively collate some of the vital information published on the thermal, pasting, cooking, and textural properties of starch noodles. Technological, nutritional, and sensory challenges during the development of starch noodles are well discussed. Due to the increasing demands of consumers for safe food items with a long shelf life, the development of starch noodles and other convenience food products has increased. Also, the incorporation of modified starches overcomes the shortcomings of native starches, such as lack of viscosity and thickening power, retrogradation characteristics, or hydrophobicity. Starch can improve the stability of the dough structure but reduces the strength and resistance to deformation of the dough. Some technological, sensory, and nutritional challenges also impact the production process.

Evaluate how steaming and sulfur fumigation change the microstructure, physicochemical properties and in vitro digestibility of Gastrodia elata Bl. starch

The sulfur dioxide gas (SO₂) generated by sulfur burning can improve the appearance quality of food and enhance the storage time. However, excessive sulfur dioxide will pollute the environment and cause deterioration of food quality, and even the high residual levels can increase the risk of cancer. As Gastrodia elata Blume is prone to corruption during processing, sulfur fumigation is often used for preservation. In this study, spectral analysis and Texture Profile Analysis (TPA) were used to investigate the effects of traditional sulfur fumigation processing on the morphology quality, edible quality and structural characteristics of G. elata. The results showed that compared with direct drying, the pH decreased by 0.399 of the sulfur fumigated after steamed treatment G. elata, and the morphology quality, pasting ability and gel edible quality of the starch were significantly improved. In addition, it was suggested that sulfur fumigation after steaming could promote the release of molecular chains from starch granules and thus enhance the cross-linking between molecules, which explained the reason for the improve of starch edible quality. This study can provide technical and theoretical support for improving the quality of starch rich foods, replacing sulfur fumigation and reducing potential environmental hazards.

The modulatory roles and regulatory strategy of starch in the textural and rehydration attributes of dried noodle products

Noodles are popular staple foods globally, and dried noodle products (DNPs) have gained increasing attention due to recent changes in consumer diet behavior. Rapid rehydration and excellent texture quality are the two major demands consumers make of dried noodle products. Unfortunately, these two qualities conflict with each other: the rapid rehydration of DNPs generally requires a loose structure, which is disadvantageous for good texture qualities. This contradiction limits further development of the noodle industry, and overcoming this limitation remains challenging. Starch is the major component of noodles, and it has two main roles in DNPs. It serves as a skeleton for the noodle in gel networks form or acts as a noodle network filler in granule form. In this review, we comprehensively investigate the different roles of starch in DNPs, and propose strategies for balancing the conflicts between texture and rehydration qualities of DNPs by regulating the gel network and granule structure of starch. Current strategies in regulating the gel network mainly focused on the hydrogen bond strength, the orientation degree, and the porosity; while regulating granule structure was generally performed by adjusting the integrity and the gelatinization degree of starch. This review assists in the production of instant dried noodle products with desired qualities, and provides insights into promising enhancements in the quality of starch-based products by manipulating starch structure.

A Mini Review of Physicochemical Properties of Starch and Flour by Using Hydrothermal Treatment

Starch and flour from various plants have been widely used for sundry applications, especially in the food and chemical industries. However, native starch and flour have several weaknesses, especially in functional, pasting, and physicochemical properties. The quality of native starch and flour can be improved by a modification process. The type of modification that is safe, easy, and efficient is physical modification using hydrothermal treatment techniques, including heat moisture treatment (HMT) and annealing (ANN). This review discusses the hydrothermal modifications of starch and flour, especially from various tubers and cereals. The discussion is mainly on its effect on five parameters, namely functional properties, morphology, pasting properties, crystallinity, and thermal properties. Modification of HMT and ANN, in general, can improve the functional properties, causing cracking of the granule surface, stable viscosity to heat, increasing crystallinity, and increasing gelatinization temperature. However, some modifications of starch and flour by HMT and ANN had no effect on several parameters or even had the opposite effect. The summary of the various studies reviewed can be a reference for the development of hydrothermal-modified starch and flour applications for various industries.

Understanding the texture and digestibility attributes of rice noodles supplemented with common vetch starch

The effects of common vetch starch (CVS) substitution on rice noodle quality were investigated, aiming to improve their texture and reduce starch digestibility. The CVS had larger granule sizes, higher amylose content and more long branch chains compared with rice starch (RS). When the CVS substitution level was 20 %, the rice noodles had the best texture quality, as the mixtures with more total starch and amylose could form denser gel structures. Moreover, the starch chains were easier to rearrange to form double helix ordered structures, resulting in a slower digestion rate. With the further increase of CVS, the noodle structure weakened and the starch digestion rate increased. This was due to the formation of looser gel structures and less ordered structures as RS granules could be easily separated into different parts by large amount of CVS with larger granule sizes, and RS with more short chains tended to be cross-linked with RS during retrogradation. With increasing CVS substitution level, the estimated glycemic index (eGI) of rice noodles decreased and then tended to be stable. Therefore, appropriate CVS substitution could improve the texture quality of rice noodles and reduce the eGI value, and the best substitution level was 20 %.

Effects of composition, thermal, and theological properties of rice raw material on rice noodle quality

The study aims to evaluate the relationships between characteristics of regional rice raw material and resulting quality of rice noodles. Four of most commonly used rice cultivars in Guangxi for noodles production were investigated. The results showed that compositions of rice flour primarily affected gelatinization and retrogradation, which then influenced the textural and sensory properties of rice noodles. Amylose content had strong positive correlation with peak viscosity (PV) and trough viscosity (TV) of rice flour (P < 0.01). PV and TV had strong negative correlations with adhesive strength (P < 0.01) and positive correlations with chewiness (P < 0.05), hardness, peak load and deformation at peak of rice noodles (P < 0.01). Protein content had positive correlation with the Setback of rice flour (P < 0.05), which is known to have influences on retrogradation. In addition, solubility had positive correlations with cooking loss (P < 0.01) and broken rate (P < 0.05) of rice noodles and strong negative correlation with its springiness (P < 0.01). Swelling power had negative correlation with broken rate (P < 0.05). As sensory score of rice noodles was negatively correlated with broken rate (P < 0.05) and cooking loss (P < 0.01) and positively correlated with springiness (P < 0.01), solubility and swelling power of rice flours were presumed to be useful for predicting consumer acceptability of rice noodles.

In situ 13 C solid-state polarization transfer NMR to follow starch transformations in food

Convenience food products tend to alter their quality and texture while stored. Texture-giving food components are often starch-rich ingredients, such as pasta or rice. Starch transforms depending on time, temperature and water content, which alters the properties of products. Monitoring these transformations, which are associated with a change in mobility of the starch chain segments, could optimize the quality of food products containing multiple ingredients. In order to do so, we applied a simple and efficient in situ ¹³ C solid-state magic angle spinning (MAS) NMR approach, based on two different polarization transfer schemes, cross polarization (CP) and insensitive nuclei enhanced by polarization transfer (INEPT). The efficiency of the CP and INEPT transfer depends strongly on the mobility of chain segments-the time scale of reorientation of the CH-bond and the order parameter. Rigid crystalline or amorphous starch chains give rise to CP peaks, whereas mobile gelatinized starch chains appear as INEPT peaks. Comparing ¹³ C solid-state MAS NMR experiments based on CP and INEPT allows insight into the progress of gelatinization, and other starch transformations, by reporting on both rigid and mobile starch chains simultaneously with atomic resolution by the ¹³ C chemical shift. In conjunction with ¹ H solid-state MAS NMR, complementary information about other food components present at low concentration, such as lipids and protein, can be obtained. We demonstrate our approach on starch-based products and commercial pasta as a function of temperature and storage.

Volatile compounds, bacteria compositions and physicochemical properties of 10 fresh fermented rice noodles from southern China

To clarify the discrepancy in characteristic flavor and bacteria composition of 10 fresh fermented rice noodles from southern China, the volatile and bacteria composition were determined by headspace-gas chromatography ion mobility spectrometry and 16SrRNA sequencing methods. The potential relationship between volatile compounds and bacterial composition has also been further revealed using spearman's correlation analysis. The contents of proximate composition, cooking properties and texture properties of 10 fresh fermented rice noodles exhibited significant different among them (p ＜ 0.05). The flavor analysis showed that a total of 54 compounds were detected. 1-Octen-one, ethyl 3-methylbutanoate, 3-methylbutanal, n-nonanal, hexanal, amyl acetate, ethanol and 2-pentyl furan were the key volatiles among them. The bacterial analysis showed that Leuconostoc and Lactococcus were the core bacteria at the genu level of all samples. Amyl acetate, 2-butanone and methyl-2-methylpropanoate were positively related to Lactococcus while ethanol was negatively correlated with Lactococcus. And Leuconostoc was positively related to 3-methylbutanal and acetone, while was negatively correlated with hexanal. Results indicated that key volatiles and textural properties of different fresh fermented rice noodle samples were associated with bacterial composition.

Physicochemical Properties and Digestion Resistance of Acetylated Starch Obtained from Annealed Starch

One of the examples of physical starch modifications is the retention of a starch suspension in water having a temperature slightly lower than the pasting temperature (annealing). The aim of this study was to investigate the effect of the annealing process performed at various temperatures as the first stage of starch modification. The annealed starch preparations were then esterified using acetic acid anhydride. Finally, the annealed and acetylated starch preparations were determined for their properties. The annealing of starch before acetylation triggered changes in the properties of the modified preparations. It contributed to a higher degree of starch substitution with acetic acid residues and to the increased swelling power of starch. Both these properties were also affected by the annealing temperature. The highest resistance to amylolysis was found in the case of the starch preparation annealed at 53.5 °C and acetylated. The double modification involving annealing and acetylation processes increased the onset and end pasting temperatures compared to the acetylation alone. Similar observations were made for the consistency coefficient and yield point.

Physicochemical properties and freeze-thaw stability of rice flour blends among rice cultivars with different amylose contents

The effectiveness of the rice flour blends (RFB) for improving the processing suitability of Dodamssal rice flour (DD), a functional rice variety with a relatively high amylose and resistance starch content, was investigated. Physicochemical properties and freeze-thaw stability of RFB composed of DD and four rice flour (RF) samples with different amylose contents were measured at different DD ratios. DD, which has low swelling power and low pasting viscosity properties, has improved some quality in terms of physicochemical properties by blending with other RF. Especially, non-additive behavior was observed in the blend with Geonyang No.2 RF (GY), a medium waxy variety, due to water competition caused by the difference in pasting temperature. The syneresis of DD was reduced by blending with 75% Hanareum No. 4 RF, with a gradual reduction effect observed following a repeated freeze-thaw cycle. GY significantly improved the low freeze-thaw stability of DD with only a 25% blend.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-021-00989-7.