Capillary zone electrophoresis of organic acids in beverages

Use of red grape pulp, marc and must in the production of beer

The aim of the paper was to determine the potential of using grape pulp, marc and must in the beer production process. Samples were fermented using non-Saccharomyces yeasts (Dekkera bruxellensis 3429, Metschnikowia pulcherrima MG970690), while Saccharomyces cerevisiae Safale US-05 was used as a control. Grape marc was obtained by pressing grape must. The grape marc, must and pulp were pasteurized and, together with wort, volumetrically introduced into fermentation flasks for fermentation. Mass changes taking place during the process were analyzed. Real extract, alcohol content, free amino nitrogen (FAN) content, titratable acidity, pH, color, organic acid profile and content of sugars were determined in obtained beers. The addition of grape marc, must and pulp increased the value of most of the tested parameters. It did not adversely affect the fermentation process. This offers the possibility of using grape marc, must and pulp in the brewing industry, even with the use of non-Saccharomyces yeast monocultures.

Characteristics of beer brewed with unconventional yeasts and addition of grape must, pulp and marc

The aim of the paper was to determine potential of using grape pulp, marc and must in the beer production process. Samples were fermented using non-Saccharomyces yeasts (Dekkera bruxellensis 3429, Metschnikowia pulcherrima MG970690) and Saccharomyces cerevisiae Safale US-05 was used as a control. Grape marc was obtained by pressing grape must with a press. Subsequently, the grape marc, must and pulp were pasteurized and, together with wort, volumetrically introduced into fermentation flasks for fermentation. Mass changes taking place during the process were analyzed. Real extract, alcohol, free amino nitrogen (FAN) content, pH, color, sugars and organic acid profile were determined in obtained beers. The research has shown that the yeasts Dekkera bruxellensis 3429 fermented similarly to Saccharomyces cerevisiae Safale US-05. The yeast D. bruxellensis 3429 produced more alcohol in the finished beers in most cases and assimilated more FAN than M. pulcherrima MG970690. The D. bruxellensis 3429 strain most effectively used L-malic acid.

Chip-based separation of organic and inorganic anions and multivariate analysis of wines according to grape varieties

This report describes the use of electrophoresis microchips integrated with contactless conductivity detection for the determination of organic acids and inorganic anions in wine samples and the subsequent classification based on the grape varieties. The best separation was achieved using a buffer composed of 30 mmol L^-1 2-(N-morpholino)ethanesulfonic acid, 15 mmol L^-1l-histidine and 0.05 mmol L^-1 cetyltrimethylammonium bromide (pH 5.8), allowing the determination of chloride, nitrate, sulfate, oxalate, tartrate, maleate, succinate, citrate, acetate, lactate, pyroglutamate and phosphate within ca. 100 s. The relative standard deviations obtained for the migration times were lower than 2%, while the obtained values for peak areas ranged from 2.5 to 8.4%. The limits of detection achieved for all compounds ranged between 3.0 and 12.6 μmol L^-1. A total of 18 wines from Brazil and Chile were successfully investigated, including red, white and rosé, and the anionic species were quantified with recovery values between 92 and 117%. A statistical difference has not been observed between the data obtained by using electrophoresis microchips integrated with contactless conductivity detection (ME-C⁴D) and capillary electrophoresis with ultra-violet detection (CE-UV) and thus the results from newly developed method is validated. Finally, similarities among the anionic profile of wines were investigated by using a multivariate approach, and it was possible to discriminate samples mainly by grapes varieties. Furthermore, the proposed methodology has provided instrumental simplicity and good analytical performance, demonstrating to be useful for routine quality control of wines.

Fast determination of lactic, succinic, malic, tartaric, shikimic, and citric acids in red Vranec wines by CZE-ESI-QTOF-MS

A fast and simple method with CZE coupled to ESI/QTOF-MS was optimized and validated for quantitative determination of organic acids (lactic acid, succinic acid, malic acid, tartaric acid, shikimic acid, and citric acid) in red wines. The BGE was ammonium acetate and the separation of the analytes was performed in a polybrene-coated capillary in the presence of EOF. The sample preparation included dilution and filtration of the wine. The method showed satisfactory performance characteristics: good linearity for each organic acid, with correlation coefficients ranging from r²  = 0.9902 (shikimic acid) to r²  = 0.9990 (tartaric acid). The limit of quantification was between 0.0034 mM (for shikimic acid) and 0.107 mM (for citric acid), and the recovery data fell between 95.8% (malic acid) and 102.7% (lactic acid); the total run time was less than 4 min. The RSD values for the interday repeatability and intraday reproducibility were between 3.44 and 9.50%, and between 1.75 and 8.29%, respectively. Seventeen Macedonian red Vranec wines were studied demonstrating a wide variation in the organic acids' concentration, which should be most probably due to the variation of the climate conditions in the vine areas.

Ion-Exclusion High-Performance Liquid Chromatography of Aliphatic Organic Acids Using a Surfactant-Modified C18 Column

Ion exclusion chromatography (IELC) of short chain aliphatic carboxylic acids is normally done using a cation exchange column under standard HPLC conditions but not in the ultra-HPLC (UHPLC) mode. A novel IELC method for the separation of this class of carboxylic acids by either HPLC or UHPLC utilizing a C18 column dynamically modified with sodium dodecyl sulfate has been developed. The sample capacity is estimated to be near 10 mM for a 20 µL injection or 0.2 µmol using a 150 × 4.6 mm column. The optimum mobile phase determined for three standard mixtures of organic acids is 1.84 mM sulfuric acid at pH 2.43 and a flow rate of 0.6 mL/min. Under optimized conditions, a HPLC separation of four aliphatic carboxylic acids such as tartaric, malonic, lactic and acetic can be achieved in under 4 min and in <2 min in the UHPLC mode at 2.1 mL/min. A variety of fruit juice and soft drink samples are analyzed. Stability of the column as measured by the retention order of maleic and fumaric acid is estimated to be ∼4,000 column volumes using HPLC and 600 by UHPLC. Reproducible chromatograms are achieved over at least a 2-month period. This study shows that the utility of a C18 column can be easily extended when needed to IELC under either standard or UHPLC conditions.

Anion composition of açaı́ extracts

Many products labeled açaı́ are presently marketed as natural supplements with various claimed health benefits. Authentic açaı́ is expensive; as a result, numerous products labeled as containing açaı́ are being sold that actually contain little or no açaı́. Authentic açaı́ samples from Brazil and Florida as well as several reputed açaı́ products were analyzed by suppressed conductometric anion chromatography. Columns with different selectivities were used to obtain a complete separation of all anions. Tandem mass spectrometry was used for confirmation of the less common ions. Quinate, lactate, acetate, formate, galacturonate, chloride, sulfate, malate, oxalate, phosphate, citrate, isocitrate, and myo-inositol hexakisphosphate (phytate) were found. Only the Florida açaı́ had detectable levels of hexanoate. No açaı́ sample had any detectable levels of tartrate, which is present in abundance in grape juice, the most common adulterant. The highly characteristic anion profile and in particular the absence of tartrate can readily be used to identify authentic açaı́ products. Açaı́ from Florida had a 6 times greater level of phytate. The present analytical approach for phytate may be superior to extant methods.

Optimisation of a capillary zone electrophoresis methodology for simultaneous analysis of organic aliphatic acids in extracts of Brachiaria brizantha

INTRODUCTION

Aluminum toxicity is commonly verified in acidic soils, and poses a severe limitation to plant growth and development. Therefore, Al complexation by the root system mucilage, Al complexation by organic compounds that are exuded by the roots and internal metabolic processes must be monitored by organic acids (OA), since they play a central role in these aluminum tolerance mechanisms.

OBJECTIVE

To optimise a capillary zone electrophoresis method able to perform simultaneous separation of acetic, citric, formic, lactic, malic, oxalic, pyruvic, succinic, tartaric and aspartic acid in plant extract solutions.

METHODOLOGY

Method optimisation was achieved by a chemometric approach through experimental designs. The optimal condition found was: 20 mmol/L phthalic acid buffer; 0.8 mmol/L cetyltrimethyl-ammonium bromide; pH 3.4 adjusted with tris(hydroxymethyl)aminomethane (around 16 mmol/L); -15 kV of voltage; 25 °C of cartridge temperature; indirect ultraviolet detection at 240 nm; and 25 mbar injection for 2 s, within an analysis time of 4 min.

RESULTS

As a repeatability test of the optimal condition, 30 replicates were carried out with the same working electrolyte, where the relative standard deviation of each peak ranged from 0.081 to 0.36% (for migration time) and from 2.4 to 4.6% (for peak area).

CONCLUSION

The methodology was successfully applied to simultaneously determine citric, malic and aspartic acid in roots and leaves extract solutions of Brachiaria brizantha, demonstrating its usefulness to study aluminum tolerance.

High efficiency joint CZE determination of sugars and acids in vegetables and fruits

In this work, an improved CE method for the medium-throughput determination of main organic acids (oxalate, malate, citrate), the amino acid glutamate and the sugars fructose, glucose and sucrose in several food matrices is described. These compounds have been identified as key components in the taste intensity of fruit and vegetable crops. Using a running buffer with 20 mM 2,6-pyridine dicarboxylic acid pH 12.1 and 0.1% hexadimethrine bromide, replacing it every 5 h to avoid pH decrease, and optimizing capillary conditioning between runs with 58 mM SDS during 2 min at 20 psi, it is possible to effectively quantify these compounds while increasing medium throughput repeatability. This procedure resolves problems such as increases in migration time and reduction of resolution between problematic peaks (malate/citrate and fructose/glucose) detected in a previous method. The new procedure even considerably reduced time analysis down to 12 min. Under optimal conditions, a large number of injections (200) could be administered without any disturbances in the same capillary. The reliability of the proposed method was further investigated with several food matrix samples, including tomato, pepper, muskmelon, winter squash, and orange. This method is recommended for routine analysis of large number of samples typical of production quality systems or plant breeding programs.

Recent advances in the application of capillary electromigration methods for food analysis and Foodomics

The use of capillary electromigration methods to analyze foods and food components is reviewed in this work. Papers that were published during the period April 2007 to March 2009 are included following the previous review by García-Cañas and Cifuentes (Electrophoresis, 2008, 29, 294-309). These works include the analysis of amino acids, biogenic amines, peptides, proteins, DNAs, carbohydrates, phenols, polyphenols, pigments, toxins, pesticides, vitamins, additives, small organic and inorganic ions and other compounds found in foods and beverages, as well as those applications of CE for monitoring food interactions and food processing. The use of microchips, CE-MS, chiral-CE as well as other foreseen trends in food analysis are also discussed including their possibilities in the very new field of Foodomics.