Evaluation of pectin nanostructure by atomic force microscopy in blanched carrot

Arabinan branches in the RG-I region of citrus pectin aid acid-induced gelation

Gelation is a critical property of citrus pectin. However, the roles played by neutral sugar side-chains on acid-induced pectin gelation remain poorly understood. Herein, galactan- or/and arabinan-eliminated pectins (P-G, P-A, and P-AG) were used to investigate the effects of side-chains on gelation. The gel hardness values of citrus pectin, P-G, P-A, and P-AG were 42.6, 39.9, 5.3, and 2.1 g, respectively, suggesting that arabinan contributed more to gelation than galactan. We next found that arabinan branches promoted pectin chain entanglement more effectively than arabinan backbones. Destabilizer addition experiments showed that hydrogen bonding, electrostatic interaction, and hydrophobic interaction were the main forces affecting pectin gel networks and strength, which was further validated by molecular dynamic simulations. The total number of hydrogen bonds between the arabinan branches and galactan/HG (65.7) was significantly higher than that between the arabinan backbones and galactan/HG (39.1), indicating that arabinan branches predominated in terms of such interactions. This study thus elucidated the roles played by neutral-sugar side-chains, especially the arabinan branches of acid-induced pectin gels, in term of enhancing high-methoxyl pectin gelation, and offers novel insights into the structure-gelling relationships of citrus pectin.

The role of water distribution, cell wall polysaccharides, and microstructure on radish (Raphanus sativus L.) textural properties during dry-salting process

Radish (Raphanus sativus L.) undergoes texture changes in their phy-chemical properties during the long-term dry-salting process. In our study, we found that during the 60-day salting period, the hardness and crispness of radish decreased significantly. In further investigation, we observed that the collaborative action of pectin methylesterase (PME) and polygalacturonase (PG) significantly decreased the total pectin, alkali-soluble pectin (ASP), and chelator-soluble pectin (CSP) content, while increasing the water-soluble pectin (WSP) content. Furthermore, the elevated activities of cellulase and hemicellulase directly led to the notable fragmentation of cellulose and hemicellulose. The above reactions jointly induced the depolymerization and degradation of cell wall polysaccharides, resulting in an enlargement of intercellular spaces and shrinkage of the cell wall, which ultimately led to a reduction in the hardness and crispness of the salted radish. This study provided key insights and guidance for better maintaining textural properties during the dry-salting process of radish.

Modulating pectin structure and enhancing texture of frozen yellow peaches: The impact of low-temperature blanching

High-temperature blanching (HTB) is the primary process that causes texture softening in frozen yellow peaches. The implementation of low-temperature blanching reduced pectin methyl esterification, increased pectin cross-linking, and mitigated pectin depolymerization during the subsequent HTB, leading to the superior texture of frozen yellow peaches with enhanced water holding capacity, higher fracture stress, and initial modulus. However, adding 2 % calcium lactate (w/v) during low-temperature blanching did not further improve the texture of frozen yellow peaches. Instead, it softened the texture by reducing Na2CO3-soluble pectin (NSP) and increasing water-soluble pectin (WSP) content. This study provided a theoretical basis for applying low-temperature blanching to improve the texture of frozen yellow peaches.

High-humidity hot-air impingement blanching conditions for the inhibition of potato-browning enzymes and for quality retention

BACKGROUND

Potato is an important non-cereal crop. It provides carbohydrates, a major source of energy in the human diet. Blanching during the processing of fresh fruits and vegetables is essential for their preservation. High-humidity hot-air impingement blanching (HHAIB) is a promising emerging technology for pretreating different food materials. This research aimed to identify the optimum HHAIB conditions for the inhibition of potato-browning enzymes, maintaining their nutritional and physical quality, and to compare this with conventional hot-water blanching (HWB).

RESULTS

Polyphenol oxidase (PPO) inactivation, total phenol content (TPC), 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, color, textural attributes, thermal properties, microstructure, and particles crystallinity were evaluated. The relative humidity (RH), temperature, and duration of HHAIB required for PPO inactivation (2.59%) were 50%, 105 °C, and 4 min, respectively, which resulted in a complete gelatigination of potato starches, based on the thermal properties and the microstrcture of the blanched potatoes. These conditions led to improvements in TPC to 312.54 μg GAE.g-1 FP, DPPH scavenging to 1.99 μmol TE.g-1 FP, as well as enhancements in color and crystallinity. When HHAIB was conducted at lower temperatures (85 and 95 °C) there were negative effects on the blanched potatoes' color and crystallinity, along with a non-safe level of PPO activity.

CONCLUSION

High-humidity hot-air impingement blanching was superior to HWB, inhibiting PPO, maintaining nutrients, and preserving physical properties, especially under the optimum conditions revealed by the principal component analysis. It provides an excellent technique for blanching and pretreating potatoes, preserving them, and maintaining their quality. © 2023 Society of Chemical Industry.

Ripening induced degradation of pectin and cellulose affects the medium-and short-wave infrared drying characteristics of mulberry

Mulberries were categorized into five stages of ripening (D1-D5, 0.905-1.055 g/cm3) based on their density, and their physicochemical properties, tissue structure, cell wall polysaccharide properties, and drying characteristics were investigated. As mulberry ripening progressed, the TSS and water-soluble pectin content rapidly increased, while the contents of TA, hardness, chelate-, sodium carbonate-soluble pectin, hemicellulose, and cellulose decreased gradually. Pectin nanostructure and monosaccharide composition indicated that both the main and side chains of pectin undergo depolymerization. Medium- and short-wave infrared drying time initially decreased and then increased during mulberry ripening, with D4 fruits exhibiting the shortest drying time. Compared with D4 fruits, the collapse of cell structure in D5 fruits prolongs their drying time. The results demonstrate that ripeness significantly affects mulberry drying characteristics, which is related to changes in cell structure and pectin properties. Utilizing mulberry density to determine ripeness and grading is an effective approach to achieving optimal drying.

Exploring the mechanism of Lycium barbarum fruit cell wall polysaccharide remodeling reveals potential pectin accumulation contributors

The level of polysaccharides in the mature Lycium barbarum fruit (LBF) cell wall depends on their metabolism, trafficking, and reassembly within the cell. In this study, we examined the composition, content, and ultrastructure of the cell wall polysaccharides of LBF during maturation, and further analyzed cell wall polysaccharide remodeling using isotope tagging with relative and absolute quantification (iTRAQ)-based proteomics. The results showed that the contents of cellulose and hemicellulose tended to increase in the pre-maturation stage and decrease in the later stage, while pectin level increased before fruit maturing. The differential expression of the 54 proteins involved in the metabolic pathways for glucose, fructose, galactose, galacturonic acid and arabinose was found to be responsible for these alterations. The work provides a biological framework for the reorganization of polysaccharides in the LBF cell wall, and supports the hypothesis that pectic polysaccharide glycosyl donors come from starch, cellulose, hemicellulose and isomorphic pectin.

New insight into pectic fractions of cell wall: Impact of extraction on pectin structure and in vitro gut fermentation

Pectic polysaccharides modulate gut fermentation ability, which is determined by structural characteristics. In this work, apple pectins were extracted by HCl (HAEP), NaOH (AEP), cellulase (EAEP), and in parallel cell wall pectic fractions were sequentially extracted by water (WEP), chelator (CEP) and NaOH (NEP). The aim is to comprehensively compare the impact of extraction on pectin structure and gut fermentation behavior. Results showed that high content of galacturonic acid (90.65 mol%) and large molecular weight (675 kg/mol) were detected in the HAEP. Molecular morphology of the HAEP presented high linearity, while AEP, EAEP and WEP exhibited compact filamentous structures with highly branched patterns. The AEP was characterized by high yield (33.1 g/100 g d.b.), moderate molecular weight (304 kg/mol) and large extent of rhamnogalacturonan-I region (24.88 %) with low degree of branching (1.77). After in vitro simulated gut fermentation for 24 h, total content of short-chain fatty acid (SCFA) generated with the AEP supplement increased to 36.8 mmol/L, followed by EAEP, HAEP and WEP (25.2, 24.2 and 20.3 mmol/L, respectively). Meanwhile, WEP simultaneously produced the highest ammonia content (22.4 mmol/L). This investigation suggests that the fermentation of AEP produces more beneficial SCFA and less ammonia, thus indicating a better gut fermentation property.

Effect of blanching and ultrasound pretreatment on moisture migration, uniformity, and quality attributes of dried cantaloupe

To overcome problems of browning and crusting during the pretreatment process and provide theoretical guidance for cantaloupe convection drying at 80°C, the effects of blanching (BL) and ultrasonic (US) treatments were examined. The effects of various BL (5, 10, and 15 s) and US (10, 20, 30, and 40 min) durations on convection drying were tested. The moisture ratio, drying rate, moisture effective diffusivity, color, browning, nuclear magnetic resonance characteristics, and texture were assessed. Compared with the control group, the maximal decreases in the drying time of BL and US pretreatment groups were 40% and 33.3%, respectively. BL and US pretreatments significantly increased the effective diffusion coefficient and shortened the drying time because of the destruction of the cell structure. Low-field nuclear magnetic resonance analysis showed that free water is mainly lost during the initial drying stage, while solidified water is mainly lost during middle and late stages. According to the results of magnetic resonance imaging, the moisture distribution shows that cavitation from US acts on internal tissue, while BL disrupts the structure of external tissue. Texture data define the area enclosed by S_C-D as uniform. After BL and US pretreatment, the hardness of dried cantaloupe decreased and the uniformity increased significantly. The best pretreatment process for cantaloupe at 80°C was 10 min of US. These findings provide a reference for testing in the industrial production of dried cantaloupe and are deeply relevant for practice.

Acetic Acid Immersion Alleviates the Softening of Cooked Sagittaria sagittifolia L. Slices by Affecting Cell Wall Polysaccharides

This study investigated the mechanism for acetic acid pretreatment to improve cell wall integrity and thereby enhance the hardness of cooked Sagittaria sagittifolia L. slices by affecting polysaccharides in the cell wall. Distilled water immersion and 0.6% acetic acid immersion (the solid/liquid ratio is 1:10) for 15 h at room temperature could result in the conversion of pectin through different reactions during thermal processing. Combined in situ and in vitro analysis demonstrated that acetic acid pretreatment could promote the interaction of cellulose microfiber or hemicellulose with RG-Ⅰ side chains during thermal processing of S. sagittifolia L. slices, promote the entanglement between linear pectin molecules and make hemicellulose show a lower molecular weight under cooking, making it easy to firmly bind to pectin, which resulted in texture changes. The findings may help improve the texture of thermally processed vegetables and fruits and deep processing of starchy vegetables.

Hot-Air Flow Rolling Dry-Blanching Pretreatment Improves the Drying Quality of Acanthopanax sessiliflorus by Increasing the Drying Rate and Inactivating Enzymes

The processing of Acanthopanax sessiliflorus has attracted interest due to its health benefits. In this work, an emerging blanching technology, called hot-air flow rolling dry-blanching (HMRDB), was employed to treat A. sessiliflorus before drying. The effects of varied blanching times (2–8 min) on enzyme inactivation, drying characteristics, bioactive compound retention, and microstructure were examined. The results demonstrated that blanching for 8 min rendered polyphenol oxidase and peroxidase nearly inactive. The blanching process reduced the drying time of samples by up to 57.89% compared to an unblanched sample. The Logarithmic model showed good fitting performance for the drying curves. The total phenolic and flavonoid content of the dried product increased as blanching time increased. The total anthocyanin content of the samples blanched for 6 min was 3.9 times higher than that of the unblanched samples, and 8 min of blanching produced the greatest DPPH• and ABTS• scavenging capabilities. The retention of active compounds in a dried product is a result of the inactivation of enzymes and a reduced drying period. Changes in the porous structure of the blanched samples would be responsible for the accelerated drying rate, according to microstructural analysis. These results indicate that HMRDB enhances the drying process and improves drying quality when applied to A. sessiliflorus before drying.

Current Advancements in Pectin: Extraction, Properties and Multifunctional Applications

Pectin is a heterogeneous hydrocolloid present in the primary cell wall and middle lamella in all dicotyledonous plants, more commonly in the outer fruit coat or peel as compared to the inner matrix. Presently, citrus fruits and apple fruits are the main sources for commercial extraction of pectin, but ongoing research on pectin extraction from alternate fruit sources and fruit wastes from processing industries will be of great help in waste product reduction and enhancing the production of pectin. Pectin shows multifunctional applications including in the food industry, the health and pharmaceutical sector, and in packaging regimes. Pectin is commonly utilized in the food industry as an additive in foods such as jams, jellies, low calorie foods, stabilizing acidified milk products, thickener and emulsifier. Pectin is widely used in the pharmaceutical industry for the preparation of medicines that reduce blood cholesterol level and cure gastrointestinal disorders, as well as in cancer treatment. Pectin also finds use in numerous other industries, such as in the preparation of edible films and coatings, paper substitutes and foams. Due to these varied uses of pectin in different applications, there is a great necessity to explore other non-conventional sources or modify existing sources to obtain pectin with desired quality attributes to some extent by rational modifications of pectin with chemical and enzymatic treatments.

Sodium bicarbonate reduces the cooked hardness of lotus rhizome via side chain rearrangement and pectin degradation

In this study, 0.1% (W/V) sodium bicarbonate (SB) solution was used to soften lotus rhizome, and the mechanism was characterized by monoclonal antibodies labeling (mAbs) and atomic force microscopy (AFM). The results showed that the cell wall of lotus rhizome was disintegrated under SB treatment. In addition, the mAbs results revealed that low-esterified homogalacturonan (HG) at the tricellular junction was degraded, the rearrangement of Ara and the interaction between Gal and cellulose may be related to the texture changes. Compared with distilled water treatment, SB treatment reduced the relative content of pectin from 34.1% to 19.1% while increased that of cellulose from 65.9% to 80.9%. AFM results revealed that the height of CSF skeleton decreased from about 32 nm to 1.5 nm. These results clearly demonstrate that cooking with 0.1% SB can soften lotus rhizome through degradation of pectin and arrangement of side chains of rhamnogalacturonan-Ⅰ (RG-Ⅰ).

Ethanol and blanching pretreatments change the moisture transfer and physicochemical properties of apple slices via microstructure and cell-wall polysaccharides nanostructure modification

The impacts of ethanol pretreatment and blanching on moisture transfer, microstructure, and nanostructure of cell-wall polysaccharides of apple slices were studied. The physicochemical properties, namely, color, rehydration, and antioxidant capacity were also evaluated. The results corroborated that the use of ethanol and blanching reduced drying time 45-60% and 21-42% at various drying temperatures (50, 60, 70, and 80 °C), respectively, compared to controls. Ethanol loosened the cell wall structure, thereby reducing the internal resistance of moisture diffusion, and the changes in cell wall structure caused by blanching were mainly due to the β-elimination degradation of pectins. Both samples of ethanol pretreatment and blanching possessed lower browning index and higher antioxidant capacity compared with the untreated ones. Overall, ethanol pretreated products exhibited the shortest drying time, less color change and higher antioxidant capacity. These results provide new insights on possible mechanisms about ethanol pretreatment and blanching to improve drying.

Delineating the inherent functional descriptors and biofunctionalities of pectic polysaccharides

Pectin is a plant-based heteropolysaccharide macromolecule predominantly found in the cell wall of plants. Pectin is commercially extracted from apple pomace, citrus peels and sugar beet pulp and is widely used in the food industry as a stabilizer, emulsifier, encapsulant, and gelling agent. This review highlights various parameters considered important for describing the inherent properties and biofunctionalities of pectins in food systems. These inherent descriptors include monosaccharide composition, galacturonic acid content, degree of esterification, molecular weight, structural morphology, functional group analysis, and functional properties, such as water and oil holding capacity, emulsification, foaming capacity, foam stability, and viscosity. In this study, we also delineate their potential as a nutraceutical, prebiotic, and carrier for bioactive compounds. The biofunctionalities of pectin as an anticancer, antioxidant, lipid-lowering, and antidiabetic agent are also conceptually elaborated in the current review. The multidimensional characteristics of pectin make it a potential candidate for use in food and biomedical science.

Effects of vacuum-steam pulsed blanching on drying kinetics, colour, phytochemical contents, antioxidant capacity of carrot and the mechanism of carrot quality changes revealed by texture, microstructure and ultrastructure

An emerging blanching technology, namely vacuum-steam pulsed blanching (VSPB) was employed to blanch the carrots and its effects on blanching efficiency, microstructure and ultrastructure, drying kinetics, colour, texture, phytochemicals (phenolics and β-carotene) and antioxidant capacity of carrot slices were explored and compared with the traditional hot water blanching. Results showed that both blanching treatments enhanced the drying velocity and shortened the drying time by 25.9% compared with untreated samples. VSPB yielded higher blanching efficiency, better colour (more red and yellow), greater antioxidant capacity and higher preservation of phytochemicals compared with hot water blanched samples. Especially, compared to hot water blanched carrots, the p-hydroxybenzoic acid, ferulic acid, and caffeic acid content of VSPB samples increased of 106.6%, 42.0%, and 19.0%, respectively. Interestingly, the chlorogenic acid content in the blanched carrot increased more than 220 times compared to fresh samples. Ultrastructure and microstructure observation clarify the mechanism of quality enhancement of VSPB.

Experimental Manipulation of Pectin Architecture in the Cell Wall of the Unicellular Charophyte, Penium Margaritaceum

Pectins represent one of the main components of the plant primary cell wall. These polymers have critical roles in cell expansion, cell-cell adhesion and response to biotic stress. We present a comprehensive screening of pectin architecture of the unicellular streptophyte, Penium margaritaceum. Penium possesses a distinct cell wall whose outer layer consists of a lattice of pectin-rich fibers and projections. In this study, cells were exposed to a variety of physical, chemical and enzymatic treatments that directly affect the cell wall, especially the pectin lattice. Correlative analyses of pectin lattice perturbation using field emission scanning electron microscopy, confocal laser scanning microscopy, and transmission electron microscopy demonstrate that pectin lattice microarchitecture is both highly sensitive and malleable.

Transient measurement and structure analysis of protein-polysaccharide multilayers at fluid interfaces

The formation of electrostatic protein-polysaccharide multilayers has attracted attention for the design of fluid interfaces with enhanced stability and functionality. However, current techniques are often limited to measuring final multilayer properties. We present an interfacial shear rheology setup with simultaneous subphase exchange, allowing the transient measurement of biopolymer multilayers by their viscoelasticity. The successive and simultaneous adsorption of β-lactoglobulin (β-lg) and low-methoxyl pectin were investigated at the n-dodecane/water interface at pH 4. The successive injection of pectin increased the viscoelasticity of an adsorbed β-lg layer by electrostatic complexation. On the other hand, simultaneous adsorption impeded adsorption kinetics and interfacial layer strength due to complexation in the bulk phase prior to adsorption. Neutron reflectometry at the air-water interface confirmed the formation of an initial β-lg layer and electrostatic complexation of a secondary pectin layer, which desorbed upon pH-induced charge inversion. The layer formed by simultaneous adsorption mainly consisted of β-lg. We conclude that protein-polysaccharide complexes show limited surface activity and result in a lower effective protein concentration available for adsorption.