Protection effect of sodium alginate against heat-induced structural changes of lactoferrin molecules at neutral pH

Structural characteristics and antioxidant activity of binary compounds formed by covalent modification of plant derived recombinant lactoferrin (OsrhLF) with four typical carbohydrates

Lactoferrin is crucial for the mammalian immune system, but the extraction of bovine lactoferrin (bLF) is low, and human lactoferrin in breast milk is costly. Although there are some reports on heterologous expression of lactoferrin, limited knowledge is available. In this study, structural characteristics and antioxidant activity of binary compounds formed by covalent modification of plant derived recombinant human lactoferrin (OsrhLF) with four typical carbohydrates including sodium alginate (SA), maltodextrin (Mal), pectin (Pec), and lactose (Lac). Results indicated that the structure of both bLF and OsrhLF unfolded, with side chain lysine or terminal amino acids forming CN bonds with aldehydes, altering their structure and improving stability and hydrophilicity. Compared with OsrhLF, the thermal denaturation temperatures of H-OsrhLF-Mal and H-OsrhLF-Lac increased by 56.8 °C and 58.4 °C, respectively. OsrhLF exhibited superior surface hydrophilicity and thermal stability compared to bLF, with Mal showing the most significant effect, aiding future functional food applications.

Green synthesis of benzimidazole derivatives using copper(II)-supported on alginate hydrogel beads

The study addresses the challenge of developing sustainable and efficient catalytic systems for the synthesis of benzimidazole derivatives, which are of significant importance in the field of medicinal chemistry due to their diverse biological activities. The objective is to develop a recyclable and environmentally friendly catalyst utilizing copper(II)-loaded alginate hydrogel beads, which can facilitate the synthesis of these compounds while minimizing environmental impact. The preparation process entails crosslinking sodium alginate with copper(II) ions to form hydrogel beads, which are then washed and characterized through techniques such as scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Inductively coupled plasma (ICP), and Zeta potential to analyses the morphology, composition and porosity of the beads. The catalytic performance is evaluated through recycling tests, which demonstrate the catalyst's ability to maintain selectivity and activity over multiple reaction cycles. The Cu(II)-Alg hydrogel beads were used for synthesizing substituted benzimidazole derivatives in a water-ethanol solvent at room temperature. This method offers significant advantages, including extremely mild reaction conditions, short reaction times (<1 h), high yields (70-94 %), and ease of processing. The most significant results indicate that the Cu(II)-alginate catalyst exhibits a high loading capacity and retains its catalytic efficiency for at least 3 cycles, thereby highlighting its potential for sustainable applications in organic synthesis.

3D printing technology for prepared dishes: printing characteristics, applications, challenges and prospects

Prepared dishes are popular convenience foods that meet the needs of consumers who pursue delicious tastes while saving time and effort. As a new technology, food 3D printing (also known as food additive manufacturing technology) has great advantage in the production of personalized food. Applying food 3D printing technology in the production of prepared dishes provides the solution to microbial contamination, poor nutritional quality and product standardization. This review summarizes the problems faced by the prepared dishes industry in traditional food processing, and introduces the characteristics of prepared dishes and 3D printing technology. Food additives are suitable for 3D prepared dishes and novel 3D printing technologies are also included in this review. In addition, the challenges and possible solutions of the application of food 3D printing technology in the field of prepared dishes are summarized and explored. Food additives with advantages in heat stability, low temperature protection and bacteriostasis help to accelerate the application of 3D printing in prepared dishes industry. The combination of 3D printing technology with heat-assisted sources (microwave, laser) and non-heat-assisted sources (electrolysis, ultrasound) provides the possibility for the development of customized prepared dishes in the future, and also promotes more 3D food printing technologies for commercial use. It is noteworthy that these technologies are still at research stage, and there are challenges for the formulation design, the stability of printed ink storage, as well as implementation of customized nutrition for the elderly and children.

Effect of pH, protein/polysaccharide ratio and preparation method on the stability of lactoferrin-polysaccharide complexes

In this study, carrageenan (CG), xanthan gum (XG) and locust bean gum (LBG), which can be used in infant formulas in China national standards, were selected to prepare LF-polysaccharide complexes to improve the stability of lactoferrin. The results showed that LF interacted more strongly with polysaccharides and did not affect the LF structure to a large extent when the pH and protein/polysaccharide mass ratio were 7 and 10:1 for LF-CG, 8 and 5:1 for LF-XG, 7 and 15:1 for LF-LBG. The zeta potential and fluorescence intensity of the LF-polysaccharide complexes displayed a decreasing trend with the increase in pH. When pH < 6, LF-CG and LF-XG exhibited precipitation and increased UV absorbance. Complexation between LF and CG/XG mainly attributed to electrostatic interactions, while LF and LBG form complexes based on hydrogen bonding or hydrophobic interactions. This study could provide a reference for the practical application of LF in infant formula.

Mechanism on microbial transglutaminase and Tremella fuciformis polysaccharide-mediated modification of lactoferrin: Development of functional food

Lactoferrin (LF) with various biological functions demonstrates great application potential. However, its application was restricted by its poor gelation and instability. The aim of this work was to explore the effect of microbial transglutaminase (MTGase) and Tremella fuciformis polysaccharide (TP) on the functional properties of LF. The formation of a self-supporting LF gel could be induced by MTGase through generating covalent crosslinks between the LF protein molecules. Meanwhile, TP was introduced into the gel system to improve the strength of LF-TP composite gels by enhancing non-covalent interactions such as hydrogen bond and electrostatic interactions during gel formation. Additionally, the LF-TP composite gel exhibited outstanding functional characteristics such as gastrointestinal digestive stability and antioxidant property. This work clarified the mechanism on MTGase and TP-mediated modification of lactoferrin, offered a novel strategy to increase the functional characteristics of LF, and enlarged the application range of LF and TP.

Alginate binding enhances the structural stability and potentiates the lytic activity of bacteriophage endolysin's partially folded conformation

Polysaccharide polymers are increasingly being used as chaperon-like macromolecules in assisting protein folding of unfolded protein molecules. They interact with unfolded or partially folded proteins in a charge and conformation specific manner that results in the formation of stable protein-polysaccharide complexes. In most of the cases, the complex formation of protein-polysaccharide is driven via non-covalent interactions that have found to endorse the activity of proteins. T4L (18.7 kDa) and T7L (17 kDa) endolysins belong to the hydrolase and amidase class of peptidoglycan degrading enzymes. Both T4L and T7L exist in partially folded forms and are devoid of lytic activity at low pH conditions. In the current study, we assessed the binding of alginate with T4L and T7L at pH 7 and 3 using variety of biophysical and biochemical techniques. Spectroscopic studies revealed differential structural modulations of partially folded T4L and T7L upon their interaction with alginate. Further, the complex formation of alginate with partially folded T4L/T7L was confirmed by ITC and STEM. Additionally, the formed complexes of alginate with both T4L/T7L PF endolysins were found to be chemically and enzymatically stable. Moreover, such complexes were also marked with differential enhancement in their lytic activities at acidic pH conditions. This implied the potency of alginate as an excellent choice of matrix to preserve the structural and functional integrity of partially folded forms of T4L and T7L at highly acidic conditions.

Impact of high-pressure processing on the bioactive compounds of milk - A comprehensive review

High-pressure processing (HPP) is a promising alternative to thermal pasteurization. Recent studies highlighted the effectivity of HPP (400-600 MPa and exposure times of 1-5 min) in reducing pathogenic microflora for up to 5 logs. Analysis of modern scientific sources has shown that pressure affects the main components of milk including fat globules, lactose, casein micelles. The behavior of whey proteins under HPP is very important for milk and dairy products. HPP can cause significant changes in the quaternary (> 150 MPa) and tertiary (> 200 MPa) protein structures. At pressures > 400 MPa, they dissolve in the following order: αs2-casein, αs1-casein, k-casein, and β-casein. A similar trend is observed in the processing of whey proteins. HPP can affect the rate of milk fat adhering as cream with increased results at 100-250 MPa with time dependency while decreasing up to 70% at 400-600 MPa. Some studies indicated the lactose influencing casein on HP, with 10% lactose addition in case in suspension before exposing it to 400 MPa for 40 min prevents the formation of large casein micelles. Number of researches has shown that moderate pressures (up to 400 MPa) and mild heating can activate or stabilize milk enzymes. Pressures of 350-400 MPa for 100 min can boost the activity of milk enzymes by up to 140%. This comprehensive and critical review will benefit scientific researchers and industrial experts in the field of HPP treatment of milk and its effect on milk components.

Graphical abstract

Lactoferrin-Chitosan Composite Hydrogels Induced by Microbial Transglutaminase: Potential Delivery Systems for Thermosensitive Bioactive Substances

In this work, lactoferrin (LF)-chitosan (CS) composite hydrogels with good loading capacity of thermosensitive bioactive substances were successfully obtained by microbial transglutaminase (MTG)-induced cross-linking. We evaluated the rheological, textural, and microstructural characteristics of the composite hydrogels under different conditions. The results demonstrated that the concentrations of LF and CS as well as the amount of MTG could regulate the textural properties, rheological properties, and water holding capability. The results of FTIR and fluorescence spectroscopy indicated that the main interactions within the composite gel were hydrogen and isopeptide bonds. Additionally, in vitro digestion simulation results verified that riboflavin kept stable in stomach due to the protection of LF-CS composite hydrogels and was released in small intestine. These results suggested that thermosensitive bioactive substance could be encapsulated and delivered by the LF-CS composite hydrogel, which could be applied in lots of potential applications in functional food as a new material.

Effects of ultrasound and thermal treatment on the interaction between hyaluronic acid and lactoferrin: Preparation, structures and functionalities

Complexes of polysaccharides and proteins have superior physicochemical and functional properties compared to single proteins or polysaccharides. In this study, lactoferrin-hyaluronic acid (LF-HA) complexes were prepared by both ultrasonic and thermal treatment. Appropriate preparation conditions, including ultrasonic and thermal treatment conditions, have been established. The complexes formed by different methods were structurally characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis, fourier transform infrared spectroscopy, and circular dichroism spectroscopy. Ultrasound formed non-covalent binding, while thermal treatment generated covalent bonding, altering the structure of LF. The LF-HA complexes showed improved heat stability, foaming stability, emulsifying activity and antioxidant capacity, but deceased foaming ability. Iron binding ability could only be improved by HA through thermal treatment. Moreover, the in vitro digestibility of LF-HA complexes decreased to below 80 % compared to LF.

Thermal stability and in vitro biological fate of lactoferrin-polysaccharide complexes

Lactoferrin (LF) is a thermally sensitive iron-binding globular glycoprotein. Heat treatment can induce its denaturation and aggregation and thus affect its functional activity. In this study, carrageenan (CG), xanthan gum (XG) and locust bean gum (LBG), allowed to apply in infant food, were used to form protein-polysaccharide complexes to improve the thermal stability of LF. Meanwhile, in vitro simulated infant digestion and absorption properties of LF were also estimated. The results showed that the complexes formed by CG and XG with LF (LF-CG and LF-XG) could significantly inhibit the loss of α-helix structure of LF against heating. LF-CG and LF-LBG could protect LF from digestion in simulated infant gastric fluid and slow down the degradation of LF under the simulated intestinal conditions. Besides, LF, LF-CG and LF-XG showed no adverse effects on the growth of Caco-2 cells in the LF concentration range of 10-300 μg/mL, and LF-XG exhibited better beneficial to improve the cell uptake of the digestive product than the other protein-polysaccharides at the LF concentration of 100 µg/mL. This study may provide a reference for the enhancement of thermal processing stability of LF and development infant food ingredient with high nutrients absorption efficiency in the gastrointestinal environment in the future.

Preparation and Characterization of Beads of Sodium Alginate/Carboxymethyl Chitosan/Cellulose Nanofiber Containing Porous Starch Embedded with Gallic Acid: An In Vitro Simulation Delivery Study

In this study, a system was designed that can encapsulate and deliver gallic acid (GA), which was composed of polysaccharide polymers based on sodium alginate (SA), carboxymethyl chitosan (CCT), and cellulose nanofibers (CN) and was assisted by porous starch. The compositions were characterized by rheology and zeta potentials, and the results showed that the materials used in this study could effectively guarantee the stability of the system. The morphology and chemical structure of the beads were characterized by SEM and FT-IR, the results indicated that the addition of CCT could effectively reduce the cracks and pores on the surface of the beads, which was beneficial to the encapsulation and delivery of GA. Moreover, the results of the swelling rate, release tests, and antioxidant tests also proved the effectiveness of the system. The pH response effect of SA/CN/CCT (SCC) beads and the protection of GA were superior, and the release rate of GA in simulated gastric fluid (SGF) was only 6.95%, while SA and SA/CN (SCN) beads reached 57.94% and 78.49%, respectively. In conclusion, the interpenetrating network polymers constructed by SA, CCT, and CN, which, combined with porous starch as a coating layer, can achieve the embedding and the delivery of GA.

Facile synthesis of pH-responsive sodium alginate/carboxymethyl chitosan hydrogel beads promoted by hydrogen bond

In this work, a novel synthesis strategy of sodium alginate/carboxymethyl chitosan hydrogel beads promoted by hydrogen bond was described. The beads were prepared by dropping the blends of two polymers into the citric acid solution. Besides hydrogen bonding, electrostatic interactions were also involved in the formation of the hydrogel beads. The thermal stability experiments revealed that the more the content of carboxymethyl chitosan, the better the thermal stability of the beads. The beads exhibited excellent pH sensitivity, pH reversibility, and lactoferrin loading capacity. The swelling ratio of the bead and its protein releasing profile was pH-dependent, which could prevent premature protein release in the gastric environment. Also, the circular dichroism results demonstrated that lactoferrin could maintain its structure during the loading and releasing process. The obtained results revealed that the hydrogel beads prepared in this work could be used as a potential protein carrier for oral delivery.

Sensory and Physicochemical Properties and Stability of Folic Acid in a Pineapple Ready-to-Serve Beverage Fortified with Encapsulated Folic Acid

Fortification of food and beverages with folic acid is carried out frequently as a remedy to folic acid deficiency which causes serious health issues. This study was carried out to investigate the effect of incorporation of folic acid encapsulated alginate submicron particles in pineapple ready-to-serve (RTS) beverages. The encapsulation efficiency and loading capacity of the particles were 91.54 ± 0.45% and 1.02 ± 0.01%, respectively. The photostability and thermal stability studies of folic acid revealed that encapsulation poses a protective effect on folic acid and that dark and refrigerated conditions contribute to higher stability of folic acid. In this study, sensory evaluation of the RTS beverages was carried out through both ranking tests and acceptance tests using a five-point hedonic scale. The sensory panel showed the highest preference to pineapple RTS with incorporated encapsulated folic acid at a quantity of its recommended daily intake (400 µg/200 mL) before heat treatment. Shelf-life evaluations were carried out through measuring physicochemical properties, and pH, titratable acidity, and total soluble solids showed negligible or acceptable changes over two months. Folic acid degradation occurred due to heat treatment, but encapsulation in alginate submicron particles provided heat stability to folic acid. Thus, microencapsulated folic acid may be a successful carrier of folic acid which can be incorporated in beverages such as fortified pineapple RTS.

Rheological Investigation of Thermoresponsive Alginate-Methylcellulose Gels for Epidermal Growth Factor Formulation

Epidermal growth factors (EGF) serve as promising candidates for skin regeneration and rejuvenation products, but their instability hinders them from widespread use. Protective immobilization and directed release can be achieved through implementing a hydrogel delivery system. Alginate and methylcellulose are both natural polymers offering biocompatibility and environmental sensitivity. This blended gel system was investigated rheologically to understand its performance in topical applications. Alginate and methylcellulose were found to form a synergistic gel system that resulted in superior viscosity and thermoresponsiveness compared to the individual components. Increasing methylcellulose concentration directly enhanced gel elasticity, and higher viscosities provided better thermal protection of EGF. The addition of EGF at 3.33 mg/mL resulted in a decrease of viscosity but an increase in viscoelastic modulus. EGF concentration also played a large role in shear viscosity and thermoresponsiveness of the ternary system. An alginate-methylcellulose system presents promising rheological tunability, which may provide EGF thermal protection in a topical delivery format.

Glycation mechanism of lactoferrin-chitosan oligosaccharide conjugates with improved antioxidant activity revealed by high-resolution mass spectroscopy

Glycosylation has a great effect on the antioxidant ability of proteins, which is due to the structural conformational change of peptides in the protein. In this study, a chitosan oligosaccharide (COS) was selected as the saccharide for glycation with lactoferrin (LF) by a wet-heat method, and a new stripe at a higher molecular zone in the gel of sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and a change in the bond revealed by Fourier transform infrared (FT-IR) and fluorescence spectroscopy analyses were used to confirm that the chitosan oligosaccharide was successfully covalently bound to lactoferrin. The ABTS and oxygen radical absorbance capacity (ORAC) assays indicated that lactoferrin exhibited a stronger antioxidant activity after glycation with the chitosan oligosaccharide. High-resolution mass spectroscopy further illuminated the relationship of enhanced antioxidant capacity and structural conformational change of peptides in lactoferrin at a molecular level.

Methods to improve rice protein dispersal at moderate pH

Dispersion of rice protein (RP) at a neutral pH is highly important for its application in the food industry. We analyzed the solubility of RP at different pH conditions and found higher solubility at pH < 3 and pH > 8 than at a neutral pH. Furthermore, at pH 2, the RP solubility improved from 30 to 63% with sonication; however, the samples precipitated when the pH was increased from 2 to 7. To circumvent this, anionic pectin and sodium alginate were added to the RP solution at pH 2. Pectin formed a complex with RP at pH 2, showing a shift in the zeta-potential from 17.3 mV (RP only) to - 1.0 mV (RP plus 1% pectin). Interestingly, the formation of this RP-pectin complex allowed RP to remain dispersed when the pH was increased to 7. Moreover, a stable emulsion could be prepared using the RP-pectin complex as an emulsifier.

Effect of milk serum proteins on aggregation, bacteriostatic activity and digestion of lactoferrin after heat treatment

To establish the effect of the presence of milk serum proteins on heat-induced changes to lactoferrin, lactoferrin alone, and lactoferrin mixed with either milk serum or β-lactoglobulin was heated at 65 °C, 70 °C and 75 °C for 30 min. After heating, the effect of milk serum proteins on aggregation of lactoferrin was characterized, after which the effect of such aggregation on digestion and bacteriostatic capacity of lactoferrin were determined. The presence of milk serum proteins accelerated the aggregation of lactoferrin during heating through thiol/disulphide interchange. Lactoferrin also formed disulphide-linked aggregates when it was heated with β-lactoglobulin. Protein aggregates formed at 75 °C were much more resistant to infant digestion, causing decreased peptide release from lactoferrin. Heating lactoferrin and milk serum proteins together accelerated the loss of bacteriostatic activity upon heating. In conclusion, heat-induced aggregation of lactoferrin with milk serum proteins affected both its digestion and its bacteriostatic activity.

Effects of Sodium Alginate on the Flotation Separation of Molybdenite From Chalcopyrite Using Kerosene as Collector

In this paper, the effect of sodium alginate (SA) on the flotation separation of molybdenite (MoS₂) from chalcopyrite using kerosene as collector was systematically investigated. The results of single-mineral micro-flotation tests indicated that SA exhibited strong depression on chalcopyrite flotation while it imposed no impact on the floatability of molybdenite. However, in the chalcopyrite–molybdenite mixed-mineral flotation system, the presence of chalcopyrite significantly increased the depressing effect of SA on molybdenite flotation, leading to a considerable reduction in the flotation selectivity. The negative impact of chalcopyrite on the performance of SA in molybdenite flotation was eliminated by adding a certain dosage of kerosene prior to SA. A concentrate containing 53.43% of molybdenum (Mo) was obtained at 76.90% of recovery using 19 mg/L kerosene and 40 mg/L SA at pH 5.4. Zeta potential measurements indicated that the adsorption of SA on chalcopyrite surfaces was stronger than that on molybdenite surfaces, which agreed with the single-mineral flotation test results. The adsorption of SA on chalcopyrite was further confirmed to be chemisorption by Fourier-transform infrared spectroscopy (FTIR) spectra analyses. When Cu²⁺ appeared in solution, the flotation of molybdenite was strongly depressed by SA. Mechanism analyses indicated that more active sites were generated on molybdenite surfaces after the addition of Cu²⁺, thus promoting the adsorption of SA.