Physiological response of Saccharomyces cerevisiae to citral combined with thermal treatment

3D Printing of Functional Strawberry Snacks: Food Design, Texture, Antioxidant Bioactive Compounds, and Microbial Stability

3D printing technology (3DP) as additive manufacturing is an innovative design technology that can meet the individual nutritional and sensory needs of consumers. Therefore, the aim of this work was to apply 3DP in the production of a strawberry-based functional product with the addition of two hydrocolloids (corn and wheat starch) in three proportions (10, 15 and 20%) and to investigate the influence of 3DP process parameters on physico-chemical and textural properties, as well as the bioactive and antioxidant potential and microbiological stability, with(out) the addition of natural antimicrobial agents. Starch type had a significant effect on all tested bioactive compounds, as well as on starch content, except for total phenolic and hydroxycinnamic acid contents. Considering the content of bioactive compounds and antioxidant capacity, program 2 proved to be more suitable than program 1. All samples exhibited good textural properties, a high degree of stability and minimal geometric deviations. Regarding microbiological safety, no pathogenic bacteria were found in the 3DP samples during storage. The 3DP sample with added citral at a concentration of 75 mg L^-1 showed the best microbiological quality. Ultimately, 3DP can be successfully used for the production of new strawberry-based functional products.

Effects of Atmospheric Plasma Corona Discharge on Saccharomyces cerevisiae: Viability, Permeability, and Morphology

Food spoilage is a routine challenge in food production. Saccharomyces cerevisiae is a major contaminating microorganism associated with fruit pulps and juices. Our study demonstrated the effect of a plasma corona discharge on S. cerevisiae viability, membrane permeability, and morphology when the cells were prepared in both dry and wet modes. The S. cerevisiae viability was examined as a function of the duration of plasma exposure, the sample's distance from the treating head, initial cell concentration, and yeast suspension volume. The results showed a linear correlation between the exposure duration and the CFU/mL in both dry and wet modes. When the initial yeast concentration was 10⁶ CFU/mL, complete eradication in the dry and wet modes occurred after 45 and 240 s, respectively. Exposure of different initial concentrations of S. cerevisiae to plasma in dry (20 s) or wet (90 s) mode led to 2 to 3 orders of magnitude reduction. In both modes, there was total eradication when the initial cell concentration was about 10³ CFU/mL. The cell-membrane permeability was examined using a flow cytometer and the fluorescent dye propidium iodide (PI). Plasma treatment in the dry mode for 30 and 45 s led to 51% and 76% PI-positive cells. Similar results were obtained in the wet mode but with a longer exposure for 120 and 240 s, respectively. Atmospheric plasma may provide disinfection technology for the food industry in a short process without heating.

Eradication of Saccharomyces cerevisiae by Pulsed Electric Field Treatments

One of the promising technologies that can inactivate microorganisms without heat is pulsed electric field (PEF) treatment. The aim of this study was to examine the influence of PEF treatment (2.9 kV cm⁻¹, 100 Hz, 5000 pulses in trains mode of 500 pulses with a pulse duration of 10 µs) on Saccharomyces cerevisiae eradication and resealing in different conditions, such as current density (which is influenced by the medium conductivity), the sort of medium (phosphate buffered saline (PBS) vs. yeast malt broth (YMB) and a combined treatment of PEF with the addition of preservatives. When the S. cerevisiae were suspended in PBS, increasing the current density from 0.02 to 3.3 A cm⁻² (corresponding to a total specific energy of 22.04 to 614.59 kJ kg⁻¹) led to an increase of S. cerevisiae eradication. At 3.3 A cm⁻², a total S. cerevisiae eradication was observed. However, when the S. cerevisiae in PBS was treated with the highest current density of 3.3 A cm⁻², followed by dilution in a rich YMB medium, a phenomenon of cell membrane resealing was observed by flow cytometry (FCM) and CFU analysis. The viability of S. cerevisiae was also examined when the culture was exposed to repeating PEF treatments (up to four cycles) with and without the addition of preservatives. This experiment was performed when the S. cerevisiae were suspended in YMB containing tartaric acid (pH 3.4) and ethanol to a final concentration of 10% (v/v), which mimics wine. It was shown that one PEF treatment cycle led to a reduction of 1.35 log10, compared to 2.24 log10 when four cycles were applied. However, no synergic effect was observed when the preservatives, free SO₂, and sorbic acid were added. This study shows the important and necessary knowledge about yeast eradication and membrane recovery processes after PEF treatment, in particular for application in the liquid food industry.

Metabolism of Lactobacillus sakei Chr82 in the Presence of Different Amounts of Fermentable Sugars

Lactobacillus sakei is widely used as a starter culture in fermented sausages since it is well adapted to meat environments and able to maintain high viability thanks to secondary pathways activated when hexoses are depleted (i.e., metabolism of pentoses and amino acids). In this study, a commercial strain of L. sakei was inoculated in a defined medium with ribose or glucose as the carbon source, at optimal or reduced concentrations, to evaluate its different physiological and metabolic responses in relation to different growth conditions. The results obtained with different approaches (HPLC, ¹H-NMR, flow cytometry) evidenced different growth performances, amino acid consumptions and physiological states of cells in relation to the carbon source as an active response to harsh conditions. As expected, higher concentrations of sugars induced higher growth performances and the accumulation of organic acids. The low sugars amount induced the presence of dead cells, while injured cells increased with ribose. Arginine was the main amino acid depleted, especially in the presence of higher ribose, and resulted in the production of ornithine. Moreover, the ¹H-NMR analysis evidenced a higher consumption of serine at the optimal sugars concentration (pyruvate production). This information can be helpful to optimize the use of these species in the industrial production of fermented sausages.

Heat-Assisted Pulsed Electric Field Treatment for the Inactivation of Saccharomyces cerevisiae: Effects of the Presence of Citral

Pulsed electric field (PEF) treatment is a non-thermal technology that has shown good potential for microbial inactivation. However, in many cases, it cannot be sufficient to avoid microbial proliferation, and the combination with other stabilizing technologies is needed. In the framework of the hurdle concept, several researches have been focused on the use of PEF in combination with heat and/or antimicrobials to increase its efficacy. This study investigated the inactivation effect of PEF on a strain of Saccharomyces cerevisiae (isolated from spoiled beverages) in a model system (growth medium). The efficacy of PEF treatment was evaluated in relation to different variables, such as electric field strength (25 and 50 kV/cm), treatment time (from 1 to 5 s), initial inoculum level (4 or 6 log cfu/ml), preheating at 50°C, medium pH (4 or 6), and addition of citral at sublethal concentration (i.e., half of minimum inhibiting concentration). The data from plate counting, modeled with the Weibull equation, showed that one of the main factors affecting yeast inactivation was the preheating of the suspension at 50°C. Indeed, higher cell load reductions were obtained with heat-assisted PEF, especially in the presence of citral. The effect of initial cell load was negligible, while pH affected yeast inactivation only without preheating, with higher death kinetics at pH 6. Flow cytometry (FCM) analysis confirmed higher mortality under these conditions. However, the occurrence of injured cells, especially in samples treated at pH 4, was observed. The ability of these cells to recover from the damages induced by treatments was affected by both citral and preheating. The synergic effects of PEF, preheating, and citral were likely due to the increase of membrane permeability (especially at pH 6), as the primary target of electroporation, which favored the solubilization of citral in the cell membrane, enhancing the efficacy of the whole process. The multi-analytical approach (traditional plate counting and FCM) allowed defining parameters to increase PEF efficacy against S. cerevisiae. Moreover, FCM, able to discriminate different physiological states of the yeast population, was helpful to better clarify the action mechanism and the potential recovery of cells after treatment.