Influence of thermal and electrical effects of ohmic heating on C-phycocyanin properties and biocompounds recovery from Spirulina platensis

Phycocyanin-Loaded Alginate-Based Hydrogel Synthesis and Characterization

Phycocyanin was extracted from Spirulina platensis using conventional extraction (CE), direct ultrasonic-assisted extraction (direct UAE), indirect ultrasonic-assisted extraction (indirect UAE), and microwave-assisted extraction (MAE) methods at different temperatures, extraction intervals, stirring rate, and power intensities while maintaining the same algae to solvent ratio (1:15 w/v). The optimization of the extraction parameters indicated that the direct UAE yielded the highest phycocyanin concentration (29.31 ± 0.33 mg/mL) and antioxidant activity (23.6 ± 0.56 mg TE/g algae), while MAE achieved the highest purity (Rp = 0.5 ± 0.002). Based on the RP value, phycocyanin extract obtained by MAE (1:15 w/v algae to solvent ratio, 40 min, 40 °C, and 900 rpm) was selected as active compound in an alginate-based hydrogel formulation designed as potential wound dressings. Phycocyanin extracts and loaded hydrogels were characterized by FT-IR analysis. SEM analysis confirmed a porous structure for both blank and phycocyanin loaded hydrogels, while the mechanical properties remained approximately unchanged in the presence of phycocyanin. Phycocyanin release kinetics was investigated at two pH values using Zero-order, First-order, Higuchi, and Korsmeyer-Peppas kinetics models. The Higuchi model best fitted the experimental results. The R2 value at higher pH was nearly 1, indicating a superior fit compared with lower pH values.

Phycocyanin from microalgae: A comprehensive review covering microalgal culture, phycocyanin sources and stability

As food safety continues to gain prominence, phycocyanin (PC) is increasingly favored by consumers as a natural blue pigment, which is extracted from microalgae and serves the dual function of promoting health and providing coloration. Spirulina-derived PC demonstrates exceptional stability within temperature ranges below 45 °C and under pH conditions between 5.5 and 6.0. However, its application is limited in scenarios involving high-temperature processing due to its sensitivity to heat and light. This comprehensive review provides insights into the efficient production of PC from microalgae, covers the metabolic engineering of microalgae to increase PC yields and discusses various strategies for enhancing its stability in food applications. In addition to the most widely used Spirulina, some red algae and Thermosynechococcus can serve as good source of PC. The genetic and metabolic manipulation of microalgae strains has shown promise in increasing PC yield and improving its quality. Delivery systems including nanoparticles, hydrogels, emulsions, and microcapsules offer a promising solution to protect and extend the shelf life of PC in food products, ensuring its vibrant color and health-promoting properties are preserved. This review highlights the importance of metabolic engineering, multi-omics applications, and innovative delivery systems in unlocking the full potential of this natural blue pigment in the realm of food applications, provides a complete overview of the entire process from production to commercialization of PC, including the extraction and purification.

Microalgae Biomass Production from Rice Husk as Alternative Media Cultivation and Extraction of Phycocyanin Using 3D-Printed Ohmic Heating Reactor

Phycocyanin is a highly valued pigment present in Spirulina platensis biomass with applications in the food industry in terms of biorefinery concepts; specifically, its antioxidant and antimicrobial capacity are an advantage that could be incorporated into a food matrix. This study aims to use rice husk as an alternative culture medium for S. platensis biomass growth and phycocyanin extraction by ohmic heating processing using a 3D-printed reactor. S. platensis was cultivated in rice husk extract (RHE) from 0-100% (v/v). The highest content of microalgal biomass was 1.75 ± 0.01 g/L, with a specific growth rate of 0.125 ± 0.01 h-1. For the phycocyanin extraction under an ohmic heating process, a 3D-printed reactor was designed and built. To optimize phycocyanin extraction, a central composite rotatable design (CCDR) was evaluated, with three factors: time (min), temperature (°C), and pH. The highest phycocyanin content was 75.80 ± 0.98 mg/g in S. platensis biomass grown with rice husk extract. Ohmic heating is a promising method for rapid phycocyanin extraction, and rice husk as a culture medium is an alternative for the growth of S. platensis biomass in the integration of second- and third-generation biorefineries.

Studying the impact of phycoerythrin on antioxidant and antimicrobial activity of the fresh rainbow trout fillets

Marine cyanobacteria present a significant potential source of new bioactive compounds with vast structural diversity and relevant antimicrobial and antioxidant activities. Phycobiliproteins (PBPs) like phycocyanin (PC), phycoerythrin (PE), and water-soluble cyanobacterial photosynthetic pigments, have exhibited strong pharmacological activities and been used as natural food additives. In this study, phycoerythrin (PE) isolated from a marine strain of cyanobacterium Nostoc sp. Ft salt, was applied for the first time as a natural antimicrobial as well as an antioxidant to increase the shelf life of fresh rainbow trout i.e., (Oncorhynchus mykiss) fillets. Fresh trout fillets were marinated in analytical grade PE (3.9 μg/mL) prepared in citric acid (4 mg/mL), and stored at 4 °C and 8 °C for 21 days. Microbiological analysis, antioxidant activity and organoleptic evaluation of both control and treated fish fillets were then statistically compared. The results demonstrated noticeable (P < 0.05) differences in the microbial counts, antioxidant activity, and organoleptic characteristic values between PE-treated and non-treated groups. In addition, we observed that treating fresh fish fillets with a PE solution leads to a significant increase in shelf life by at least 14 days. Consequently, PE could be an alternative to synthetic chemical additives since it does not contain the potentially dangerous residues of the synthetic chemical additives and is thus healthier to the consumers.

Partitioning Recovery of Natural Pigments from Spirulina platensis

In the last few decades, the recovery of high-added value compounds with high food potential using microalgae as feedstock has been one of the main challenges for both research and industry. This study provides a simple, affordable, and cost-saving approach for the selective recovery of C-phycocyanin (C-PC), chlorophyll a and carotenoids from Spirulina platensis biomass by using biocompatible and industrially approved solvents (such as CaCl2 and ethanol). The concentration and yield of each pigment in the liquid extract have been spectrophotometrically detected, whereas the decolorized protein-rich biomass has been analyzed by CIELab parameters. The most concentrated (566.4 μg/mL) and food-grade C-PC extract (purity index 0.7) was obtained by applying a biomass/solvent ratio (1:10) for the first round of extraction (20 min), followed by a second round at 1:5 using CaCl2 1.5% (w/v) aqueous solution. Additionally, the same trial enabled the production of the brightest decolorized protein-rich biomass (L* = 46.2), characterized by a yellow-orange tonality (h° values = 81.3°).

Impact of Biomass Drying Process on the Extraction Efficiency of C-Phycoerythrin

Drying the biomass produced is one of the critical steps to avoid cell degradation; however, its high energy cost is a significant technological barrier to improving this type of bioprocess's technical and economic feasibility. This work explores the impact of the biomass drying method of a strain of Potamosiphon sp. on the extraction efficiency of a phycoerythrin-rich protein extract. To achieve the above, the effect of time (12-24 h), temperature (40-70 °C), and drying method (convection oven and dehydrator) were determined using an I-best design with a response surface. According to the statistical results, the factors that most influence the extraction and purity of phycoerythrin are temperature and moisture removal by dehydration. The latter demonstrates that gentle drying of the biomass allows removing the most significant amount of moisture from the biomass without affecting the concentration or quality of temperature-sensitive proteins.

Exploring the Benefits of Phycocyanin: From Spirulina Cultivation to Its Widespread Applications

Large-scale production of microalgae and their bioactive compounds has steadily increased in response to global demand for natural compounds. Spirulina, in particular, has been used due to its high nutritional value, especially its high protein content. Promising biological functions have been associated with Spirulina extracts, mainly related to its high value added blue pigment, phycocyanin. Phycocyanin is used in several industries such as food, cosmetics, and pharmaceuticals, which increases its market value. Due to the worldwide interest and the need to replace synthetic compounds with natural ones, efforts have been made to optimize large-scale production processes and maintain phycocyanin stability, which is a highly unstable protein. The aim of this review is to update the scientific knowledge on phycocyanin applications and to describe the reported production, extraction, and purification methods, including the main physical and chemical parameters that may affect the purity, recovery, and stability of phycocyanin. By implementing different techniques such as complete cell disruption, extraction at temperatures below 45 °C and a pH of 5.5-6.0, purification through ammonium sulfate, and filtration and chromatography, both the purity and stability of phycocyanin have been significantly improved. Moreover, the use of saccharides, crosslinkers, or natural polymers as preservatives has contributed to the increased market value of phycocyanin.

Active aroma compounds assessment of processed and non-processed micro- and macroalgae by solid-phase microextraction and gas chromatography/mass spectrometry targeting seafood analogs

The odor of four algae was investigated and compared to evaluate the potential of these algae to mimic shrimp aroma. Solid-phase microextraction followed by gas chromatography analysis coupled with sensory analysis was used for performance assessment. The volatile organic compounds were determined in non-processed, raw samples (r), and processed cooked (c) and cooking water (w) samples for two microalgae [Nannochoropsis oceanica (NO) and Tetraselmis chuii (TC)], two macroalgae [Ulva rígida (UR) and Saccharina latíssima (SL)], and shrimp Vannamei cong (SH). The results showed significant differences in the composition of volatile compounds between macroalgae and microalgae. The key odorants in macroalgae were octanal, 2-octenal, nonanal, and β-ionone, and in microalgae were 1,5-octadien-3-ol, hexanal, 2,4-decadienal, 2-octenal, octanal, nonanal, 3,5-octadien-2-one, and terpenes. The PCA analysis of GC-MS data showed odor similarities between the studied samples, which were divided into five main groups: (1) TC(c) and TC(w); (2) TC(r) and NO(c); (3) NO(r), NO(w), and SL(w); (4) SL(c), UR(r), UR(c), and UR(w); and (5) SL(r). The data from the sensory analysis show bigger similarities between the macroalgae and the shrimp odor. Overall, the data provided indicate that the cooking water and cooked samples are very similar in key components of odorants. These features allow the possibility to use algae and their processed resulting products as a shrimp flavor replacement in non-animal-based food formulations, thus decreasing the pressure on seafood crops and aquaculture-associated issues leading to more sustainable livestock. Furthermore, circularity and waste reduction may be further enabled by the use of otherwise wasted cooking water as an odorant agent.

A simple method for extracting phycocyanin from Arthrospira (Spirulina) platensis by autolysis

Phycocyanin (PC) is a natural blue pigment that has great commercial value in food and pharmaceutical industry. Arthrospira (Spirulina) platensis is a photosynthetic spiral-shaped cyanobacterium containing a rich PC pigment. Autolysis is the enzymatic digestion of cells by the action of its own enzymes. To develop an effective and economical extraction process, an autolysis process was incorporated into the conventional freezing-thawing method. In the present study, 91% of maximal extraction yield of PC with 1.194 purity (A₆₂₀/A₂₈₀) was obtained via autolysis after 3 h of incubation at 37 °C without using an extraction salt solution or a successive freezing-thawing process. In addition to temperature, the initial concentration of bicarbonate in growth medium and the concentration of wet biomass are important parameters that influence the extraction yield of PC by autolysis.

Exploring the Palynological, Chemical, and Bioactive Properties of Non-Studied Bee Pollen and Honey from Morocco

Bee products are known for their beneficial properties widely used in complementary medicine. This study aims to unveil the physicochemical, nutritional value, and phenolic profile of bee pollen and honey collected from Boulemane–Morocco, and to evaluate their antioxidant and antihyperglycemic activity. The results indicate that Citrus aurantium pollen grains were the majority pollen in both samples. Bee pollen was richer in proteins than honey while the inverse was observed for carbohydrate content. Potassium and calcium were the predominant minerals in the studied samples. Seven similar phenolic compounds were found in honey and bee pollen. Three phenolic compounds were identified only in honey (catechin, caffeic acid, vanillic acid) and six phenolic compounds were identified only in bee pollen (hesperidin, cinnamic acid, apigenin, rutin, chlorogenic acid, kaempferol). Naringin is the predominant phenolic in honey while hesperidin is predominant in bee pollen. The results of bioactivities revealed that bee pollen exhibited stronger antioxidant activity and effective α-amylase and α-glycosidase inhibitory action. These bee products show interesting nutritional and bioactive capabilities due to their chemical constituents. These features may allow these bee products to be used in food formulation, as functional and bioactive ingredients, as well as the potential for the nutraceutical sector.

Enhancement of Metabolite Production in High-Altitude Microalgal Strains by Optimized C/N/P Ratio

This study evaluated the role of C/N/P in the increase in the synthesis of carbohydrates, proteins, and lipids in two high-mountain strains of algae (Chlorella sp. UFPS019 and Desmodesmus sp. UFPS021). Three carbon sources (sodium acetate, sodium carbonate, and sodium bicarbonate), and the sources of nitrogen (NaNO3) and phosphate (KH2PO4 and K2HPO4) were analyzed using a surface response (3 factors, 2 levels). In Chlorella sp. UFPS019, the optimal conditions to enhance the synthesis of carbohydrates were high sodium carbonate content (3.53 g/L), high KH2PO4 and K2HPO4 content (0.06 and 0.14 g/L, respectively), and medium-high NaNO3 (0.1875 g/L). In the case of lipids, a high concentration of sodium acetate (1.19 g/L) coupled with high KH2PO4 and K2HPO4 content (0.056 and 0.131 g/L, respectively) and a low concentration of NaNO3 (0.075 g/L) drastically induced the synthesis of lipids. In the case of Desmodesmus sp. UFPS021, the protein content was increased using high sodium acetate (2 g/L), high KH2PO4 and K2HPO4 content (0.056 and 0.131 g/L, respectively), and high NaNO3 concentration (0.25 g/L). These results demonstrate that the correct adjustment of the C/N/P ratio can enhance the capacity of high-mountain strains of algae to produce high concentrations of carbohydrates, proteins, and lipids.

Optimization of Phycobiliprotein Solubilization from a Thermotolerant Oscillatoria sp

The present study evaluated the effect of multiple variables (drying time, drying temperature, biomass/solvent ratio, glass beads/biomass ratio, extraction time, and extraction speed) in the solubilization of three different phycobiliproteins (C-PC, APC, and PE) from a thermotolerant Oscillatoria sp. The strain was grown in BG11 media (28 °C, light: dark cycle of 12:12 h at 100 µmol·m−2·s−1, 20 days) and the experiments were conducted according to a two-level randomized factorial design with six center points (38 runs). Results show that biomass/solvent ratio, glass beads/biomass ratio, and extraction time, are the most significant variables in the extraction of all three proteins, whereas the glass beads/biomass ratio and extraction time significantly affect their purity. The optimized conditions allow a statistical increase in the concentration of C-PC, APC, and PE extracted from the biomass; however, the purity was lower in comparison with the expected value. The latter occurs due to a larger biomass/solvent ratio and longer extraction times, which enhanced the solubility of other hydrophilic metabolites (proteins and carbohydrates, etc.).

Anthocyanin Recovery from Grape by-Products by Combining Ohmic Heating with Food-Grade Solvents: Phenolic Composition, Antioxidant, and Antimicrobial Properties

Usually, wine-making by-products are discarded, presenting a significant environmental impact. However, they can be used as a source of bioactive compounds. Moreover, consumers' increasing demand for naturally nutritious and healthy products requires new formulations and food product improvement, together with sustainable, environmentally friendly extraction methods. Thus, this work aimed to compare ohmic heating (OH) with conventional methodology (CONV), using food-grade solvents, mainly water, compared to standard methanol extraction of anthocyanins. No significant differences were found between the CONV and OH for total phenolic compounds, which were 2.84 ± 0.037 and 3.28 ± 0.46 mg/g DW gallic acid equivalent, respectively. The same tendency was found for antioxidant capacity, where CONV and OH presented values of 2.02 ± 0.007 g/100 g and 2.34 ± 0.066 g/100 g ascorbic acid equivalent, respectively. The major anthocyanins identified were malvidin-3-O-acetylglucoside, delphinidin-3-O-glucoside, petunidine-3-O-glucoside, cyanidin-3-O-glucoside, and peonidine-3-O-glucoside. These extracts displayed antimicrobial potential against microorganisms such as Yersinia enterocolitica, Pseudomonas aeruginosa, Salmonella enteritidis, methicillin-sensitive Staphylococcus aureus, a methicillin-resistant Staph. aureus (MRSA), and Bacillus cereus. In conclusion, OH provides similar recovery yields with reduced treatment times, less energy consumption, and no need for organic solvents (green extraction routes). Thus, OH combined with water and citric acid allows a safe anthocyanin extraction from grape by-products, thus avoiding the use of toxic solvents such as methanol, and with high biological potential, including antimicrobial and antioxidant activity.

Phycocyanin from Spirulina: A review of extraction methods and stability

Phycocyanin (C-PC) application by the industry is still limited due to extraction methods drawbacks and to the low stability of these compounds after the extraction process. To overcome such limitations, alternative extraction methodologies have been evaluated, and stabilizing agents have been used under different conditions in the past years. Therefore, the aim of this review was to bring the state of the art of C-PC extraction methods, including main parameters that affect the extraction process and cell disruption mechanisms, as well as the physical and chemical parameters that may influence C-PC stability. Stabilizing agents have been used to avoid C-PC content degradation during storage and food processing. A critical analysis of the extraction methods indicated that pulsed electric field (PEF) is a promising technology for C-PC extraction since the extracts present relative high C-PC concentration and purity. Other methods either result in low purity extracts or are time demanding. Regarding stabilizing agents, natural polymers and sugars are potential compounds to be used in food formulations to avoid color and antioxidant activity losses.

In Vitro Gastrointestinal Digestion Impact on the Bioaccessibility and Antioxidant Capacity of Bioactive Compounds from Tomato Flours Obtained after Conventional and Ohmic Heating Extraction

In times of pandemic and when sustainability is in vogue, the use of byproducts, such as fiber-rich tomato byproducts, can be an asset. There are still no studies on the impact of extraction methodologies and the gastrointestinal tract action on bioactive properties. Thus, this study used a solid fraction obtained after the conventional method (SFCONV) and a solid fraction after the ohmic method (SFOH) to analyze the effect of the gastrointestinal tract on bioactive compounds (BC) and bioactivities. Results showed that the SFOH presents higher total fiber than SFCONV samples, 62.47 ± 1.24–59.06 ± 0.67 g/100 g DW, respectively. Both flours present high amounts of resistant protein, representing between 11 and 16% of insoluble dietary fiber. Furthermore, concerning the total and bound phenolic compounds, the related antioxidant activity measured by 2,2′-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical cation decolorization assay presented significantly higher values for SFCONV than SFOH samples (p < 0.05). The main phenolic compounds identified in the two flours were gallic acid, rutin, and p-coumaric acid, and carotenoids were lycopene, phytofluene, and lutein, all known as health promoters. Despite the higher initial values of SFCONV polyphenols and carotenoids, these BCs’ OH flours were more bioaccessible and presented more antioxidant capacity than SFCONV flours, throughout the simulated gastrointestinal tract. These results confirm the potential of ohmic heating to modify the bioaccessibility of tomato BC, enhancing their concentrations and improving their antioxidant capacity.

Pilot-scale ohmic heating-assisted extraction of wheat bran bioactive compounds: Effects of the extract on corn oil stability

Recent studies introduced ohmic heating-assisted extraction (OHAE) as a promising emerging technology at laboratory-scales. The objectives of the present study were, first, to investigate the applicability of OHAE at pilot-scale for extraction of bioactive compounds from wheat bran immersed in a polar solvent (salted water containing 0.1% NaCl) at the electric field strengths (EFS) of 4.28, 7.90, and 15.71 V/cm and, second, to evaluate the effects of the wheat extracts on the corn oil stability during 30 days of storage at 45 °C. The results showed that OHAE saved 63% of energy consumption compared with the conventional extraction method. Also, the scaled-up OHAE unit yielded extracts with high quantities of bioactive compounds (110-460 ppm total phenolics) and higher antioxidant activities (antioxidant effectiveness of 56-84%) than those of the extract obtained through the conventional extraction method, i.e., 95 ppm total phenolics with antioxidant effectiveness of 51%. Increasing the EFS increased total phenolics and antioxidant effectiveness of extracts. The incorporation of 250 ppm of the extract obtained at the highest EFS effectively postponed the oxidation of corn oil during one month of storage (peroxide value of 7 vs. 19 meq/kg compared with the control sample) and extended the half-life of oil from 11 to 26 days. Besides, mathematical models proposed in this study well-predicted the oxidation stability of the oil samples mixed with the extract.