Effects of different lipids on the physicochemical properties and microstructure of pale, soft and exudative (PSE)-like chicken meat gel

The dual role of mannosylerythritol lipid-A: Improving gelling property and exerting antibacterial activity in chicken and beef gel

Gel meat products are important in the meat market. To develop high-quality meat gel products, mannosylerythritol lipid-A (MEL-A) was added to chicken and beef gels, and their physicochemical and biological properties of the composite gel formed by heating were determined in this study. The results of texture analysis showed that MEL-A could significantly improve the hardness, gumminess and chewiness of meat gels and reduce water loss (P < 0.05). In addition, rheological and differential scanning calorimetry (DSC) analysis showed that MEL-A not only improved the rheological properties of meat gel, but also improved its thermal stability. The results of dynamic rheological analysis also showed that MEL-A improved the gel strength of meat gel, and the gel strength of chicken was the highest after adding 1.5 % MEL-A while the gel strength of beef was the highest after adding 2 % MEL-A. The image of scanning electron microscopy (SEM) and protein molecular weight distribution measurement indicated that MEL-A induced protein aggregation, resulting in fewer pores in the meat gels and a more compact network structure. These results suggest that different meat gels show good gel properties, so MEL-A has a lot of potential for gel product development.

Influence mechanisms of linoleic acid and oleic acid on the gel properties of egg yolk protein

BACKGROUND

Gel property is among the crucial functional properties of egg yolk (EY), which determines the texture and flavor of EY products. In the present study, the effects of two unsaturated fatty acids [monounsaturated fatty acid oleic acid (OA) and diunsaturated fatty acid linoleic acid (LA)] on the gel properties of EY protein were investigated.

RESULTS

Compared with the blank group, the addition of LA and OA (10-50 g kg-1) improved the gel hardness (from 270.54 g to 385.85 g and 414.38 g, respectively) and viscosity coefficient (from 0.015 Pa.sn to 11.892 Pa.sn and 1.812 Pa.sn, respectively). The surface hydrophobicity of EY protein increased to a maximum value of 40 g kg-1 with the addition of both fatty acids (39.06 μg and 41.58 μg, respectively). However, excess unsaturated fatty acids (≥ 50 g kg-1) disrupted the completeness of the gel matrix and weakened the structural properties of the EY gel.

CONCLUSION

Both fatty acids improved the gel properties of EY protein. At the same addition level, OA was superior to LA in improving gel properties. The present study provides a theoretical underpinning for the sensible application of unsaturated fatty acids in improving EY gel properties. © 2024 Society of Chemical Industry.

Effect of vegetable oils on the thermal gel properties of PSE-like chicken breast meat protein isolate-based emulsion gels

To enhance the gel properties of PSE (pale, soft, and exudative)-like chicken meat protein isolate (PPI), the effect of peanut, corn, soybean, and sunflower oils on the gel properties of PPI emulsion gels was investigated. Vegetable oils improved emulsion stability and gel strength and enhanced viscosity and elasticity. The gel strength of the PPI-sunflower oil emulsion gel increased by 163.30 %. The thermal denaturation temperature and enthalpy values were increased. They decreased the particle size of PPI emulsion (P < 0.05) and changed the three-dimensional network structure of PPI emulsion gels from reticular to sheet with a smooth surface and pore-reduced lamellar. They elevated the content of immobile water PPI emulsion gels, decreased the α-helix and β-turn, and increased the β-sheet and random coil. Vegetable oil improved the gel properties of PPI in the following order: sunflower oil > soybean oil > corn oil ≈ peanut oil > control group.

Investigation on 3D Printing of Shrimp Surimi Adding Three Edible Oils

Three-dimensional (3D) printing provides a new method for innovative processing of shrimp surimi. However, there still exists a problem of uneven discharge during the 3D printing of surimi. The effects of different amounts of lard oil (LO), soybean oil (SO), and olive oil (OO) (0%, 2%, 4%, and 6%, respectively) added to shrimp surimi on the 3D printability of surimi were evaluated. The findings showed that with the increase in the added oil, the rheological properties, texture properties, water-holding capacity (WHC), and water distribution of surimi with the same kind of oil were significantly improved; the printing accuracy first increased and then decreased; and the printing stability showed an increasing trend (p < 0.05). The surimi with 4% oil had the highest printing adaptability (accuracy and stability). Different kinds of oil have different degrees of impact on the physical properties of surimi, thereby improving 3D-printing adaptability. Among all kinds of oil, LO had the best printing adaptability. In addition, according to various indicators and principal component analysis, adding 4% LO to shrimp surimi gave the best 3D-printing adaptability. But from the aspects of 3D printing properties and nutrition, adding 4% SO was more in line with the nutritional needs of contemporary people.

Insights into the mechanism of L-malic acid on drip loss of chicken meat under commercial conditions

BACKGROUND

A deterioration in the meat quality of broilers has attracted much more attention in recent years. L-malic acid (MA) is evidenced to decrease meat drip loss in broilers, but the underlying molecular mechanisms are still unclear. It's also not sure whether the outputs obtained under experimental conditions can be obtained in a commercial condition. Here, we investigated the effects and mechanisms of dietary MA supplementation on chicken meat drip loss at large-scale rearing.

RESULTS

Results showed that the growth performance and drip loss were improved by MA supplementation. Meat metabolome revealed that L-2-aminoadipic acid, β-aminoisobutyric acid, eicosapentaenoic acid, and nicotinamide, as well as amino acid metabolism pathways connected to the improvements of meat quality by MA addition. The transcriptome analysis further indicated that the effect of MA on drip loss was also related to the proper immune response, evidenced by the enhanced B cell receptor signaling pathway, NF-κB signaling pathway, TNF signaling pathway, and IL-17 signaling pathway.

CONCLUSIONS

We provided evidence that MA decreased chicken meat drip loss under commercial conditions. Metabolome and transcriptome revealed a comprehensive understanding of the underlying mechanisms. Together, MA could be used as a promising dietary supplement for enhancing the water-holding capacity of chicken meat.

Use of basic amino acids to improve gel properties of PSE-like chicken meat proteins isolated via ultrasound-assisted alkaline extraction

To improve the gel quality of pale, soft, and exudative (PSE)-like chicken protein isolate (PPI) obtained via ultrasound-assisted alkaline extraction (UAE), l-lysine (l-Lys), l-arginine (l-Arg), or l-histidine (l-His) were used and the effects on the thermal gelling characteristics of PPI were studied. Compared with the nonbasic amino acid addition group, the addition of l-His/l-Arg/l-Lys significantly increased the solubility and absolute zeta potential of PPI, whereas reduced the particle size and turbidity (p < 0.05). They enhanced the gel strength and textural properties of PPI (p < 0.05) and reduced the cooking loss of PPI in the following order: l-Lys > l-Arg > l-His. The solubility, gel strength, and hardness of PPI with l-Lys were increased by 18.6%, 44.6%, and 57.6%, respectively, and cooking loss was decreased by 18.1%. Low-field nuclear magnetic resonance and magnetic resonance imaging revealed that basic amino acids addition decreased the water mobility in PPI gels with increasing immobile water content. Scanning electron microscopy revealed that the addition of basic amino acids promoted the formation of a more uniform and tight network microstructure in PPI gels. The α-helix content was decreased, whereas the β-sheet content was increased in PPI gels after basic amino acid addition. Therefore, addition of basic amino acids, especially l-Lys, enhances the gel properties of PPI. PRACTICAL APPLICATION: This study revealed that adding basic amino acids effectively improved the gel properties of PPI obtained via UAE method, with l-Lys exerting the best improvement effect. Our findings highlight the application value of PSE-like meat by the improvement of gel characteristics of PPI, providing a theoretical reference for the processing and utilization of PPI.

In vitro digestibility of proteins, peptidomic analysis and antioxidant ability of sodium-reduced pork sausage with partial substitution of NaCl by KCl

High salt (NaCl) consumption can impact on human health, and KCl is the most widely used replacement salt in meat products. This study investigated the effects of 0% NaCl (NS), 3% NaCl (HS), 1.95% NaCl (RS), 1.95% NaCl+1.05% KCl (RS + K) on protein digestibility of pork sausage in vitro. The results indicated that RS + K showed the highest gastrointestinal digestibility (GID) because of the structure of looser cross-linked strands and uniform cavities, while HS exhibited the lowest GID. RS + K released more peptides (2499) during gastrointestinal than NS (2301), RS (2130) and HS (2235), with a higher proportion of peptides with molecular weights <1000 Da, and more unique peptides. Meanwhile, the digestion product of RS + K exhibited excellent radical scavenging activity and improved the antioxidant abilities to reduce oxidative injury which was induced by H₂O₂ in HepG2 cells. These results demonstrated that partial substitution with KCl can be an effective strategy for improving the digestibility of sodium-reduced gel-type meat products.