Thorium(IV) removal from aqueous medium by citric acid treated mangrove endophytic fungus Fusarium sp. #ZZF51

Exploring the biosorption of nickel and lead by Fusarium sp. biomass: kinetic, isotherm, and thermodynamic assessment

Fungal biomass is as a cost-effective and sustainable biosorbent utilized in both active and inactive forms. This study investigated the efficacy of inactivated and dried biomass of Fusarium sp. in adsorbing Ni2+ and Pb2+ from aqueous solutions. The strain underwent sequential cultivation and was recovered by filtration. Then, the biomass was dried in an oven at 80 ± 2 °C and sieved using a 0.1-cm mesh. The biosorbent was thoroughly characterized, including BET surface area analysis, morphology examination (SEM), chemical composition (XRF and FT-IR), thermal behavior (TGA), and surface charge determination (pH-PZC and zeta potential). The biosorption mechanism was elucidated by fitting equilibrium models of kinetics, isotherm, and thermodynamic to the data. The biosorbent exhibited a neutral charge, a rough surface, a relatively modest surface area, appropriate functional groups for adsorption, and thermal stability above 200 °C. Optimal biosorption was achieved at 25 ± 2 °C, using 0.05 g of adsorbent per 50 mL of metallic ion solution at initial concentrations ranging from 0.5 to 2.0 mg L-1 and at pH 4.5 for Pb2+ and Ni2+. Biosorption equilibrium was achieved after 240 min for Ni2+ and 1440 min for Pb2+. The process was spontaneous, mainly through chemisorption, in monolayer for Ni2+ and multilayer for Pb2+, with efficiencies of over 85% for both metallic ion removal. These findings underscore the potential of inactive and dry Fusarium sp. biomass (IDFB) as a promising material for the biosorption of Ni2+ and Pb2+.

Enhanced Versatility in Thorium Removal: Mesoporous Silica-Coated Magnetic Nanoparticles Functionalized by Phenanthroline Diamide as a Selective Adsorbent

In order to promote the sustainable development of nuclear energy through thorium (Th(IV)) recycling, we synthesized SiO2-coated magnetic functional nanocomposites (SiO2@Fe3O4) that were modified with 2,9-diamide-1,10-phenanthroline (DAPhen) to serve as an adsorbent for Th(IV) removal. SiO2@Fe3O4-DAPhen showed effective Th(IV) adsorption in both weakly and strongly acidic solutions. Owing to its porous structure that facilitated rapid adsorption kinetics, equilibrium was achieved within 5 and 0.5 min at pH 3 and 1 mol L-1 HNO3, respectively. In weakly acidic solutions, Th(IV) primarily formed chemical coordination bonds with DAPhen groups, while in strongly acidic solutions, the dominant interaction was electrostatic attraction. Density functional theory (DFT) calculations indicated that electrostatic attraction was weaker compared to chemical coordination, resulting in reduced diffusion resistance and consequently faster adsorption rates in strongly acidic solutions. Furthermore, SiO2@Fe3O4-DAPhen exhibited a high adsorption capacity for Th(IV); it removed Th(IV) through chelation and electrostatic attraction at pH 3 and 1 mol L-1 HNO3, with maximum adsorption capacities of 833.3 and 1465.7 mg g-1, respectively. SiO2@Fe3O4-DAPhen also demonstrated excellent tolerance to salinity, adsorption selectivity, and radiation resistance, thereby highlighting its practical potential for Th(IV) removal in diverse contaminated water sources. Hence, SiO2@Fe3O4-DAPhen represents a promising choice for the rapid and efficient removal of Th(IV).

Surface Engineering Design of Nano FeS@Stenotrophomonas sp. by Ultrasonic Chemical Method for Efficient U(VI) and Th(IV) Extraction

Nano-FeS has great potential for use in the management of radioactive contaminants. In this paper, we prepared a FeS@Stenotrophomonas sp. composite material by ultrasonic chemistry, and it showed excellent removal of uranium and thorium from the solution. Through optimization of the experimental conditions, it was found that the maximum adsorption capacities for uranium and thorium reached 481.9 and 407.5 mg/g for a composite made with a synthetic ratio of 1:1, pH 5 and 3.5, respectively, for U and Th, and sonication for 20 min. Compared with those of FeS or Stenotrophomonas alone, the removal capacity was greatly improved. The results of a mechanistic study indicated that efficient removal of the uranium and thorium was due to ion exchange, reduction, and microbial surface adsorption. FeS@Stenotrophomonas sp. could be applied to U(VI) and Th(IV) extraction for radioactive water.

Preparation, uranium (VI) absorption and reuseability of marine fungus mycelium modified by the bis-amidoxime-based groups

Bis-amidoxime-based claw-like-functionalized marine fungus material (ZZF51-GPTS-DCDA-AM) was prepared for study to absorb the low concentration uranium (VI) from aqueous solution. A series of characterization methods such as SEM, TGA and FT-IR were applied for the functionalized materials before and after modification and adsorption. The experimental results suggested that the amidoxime groups were successfully grafted onto the surface of mycelium powder and provided the special binding sites for the absorption of uranium (VI). In the absorption research, uranium (VI) initial concentration, pH and equilibrium time were optimized as 40 mg L−1, 6.0, and 110 min by L4 3 orthogonal experiment, respectively, and the maximum absorption capacity of the prepared material was 370.85 mg g−1 under the optimum batch conditions. After five cycling process, the desorption rate and regeneration efficiency of the modified mycelium were found to be 80.29 % and 94.51 %, respectively, which indicated that the material had an adequately high reusability property as a cleanup tool. The well known Langmuir and Freundlich isotherm adsorption model fitting found that the modified materials had both monolayer and bilayer adsorption to uranium (VI) ions. Simultaneously, the pseudo-second-order model was better to illustrated the adsorption kinetics process. The enhanced adsorption capacity of uranium (VI) by the modified fungus materials over raw biomass was mainly owing to the strong chelation of amidoxime groups and uranium (VI) ions.

Arsenic removal by natural and chemically modified water melon rind in aqueous solutions and groundwater

Contamination of groundwater with toxic arsenic (As) has become an emerging health and environmental problem around the world, which has seen significant attention amongst the scientists for development of new sorbents to remediate As-contaminated water. Here, we explored the arsenate (As(V)) and arsenite (As(III)) sorption to natural water melon rind (WMR), xanthated WMR and citric acid-modified WMR in aqueous solutions, and determined potential of the most potent sorbent for As removal in groundwater. Xanthated WMR (X-WMR) showed relatively higher As(V) and As(III) removal than the citric acid modified WMR (CA-WMR) and natural WMR. The maximum As(III) (99%) and As(V) (98%) removal was obtained at pH 8.2 and 4.6, respectively, by X-WMR at 4 mg L^-1 initial As(V) and As(III) concentrations and sorbent dose of 1 g L^-1. Langmuir isotherm model best fitted (R² of up to 0.96) the data both for As(III) and As(V) sorption to X-WMR. Sorption kinetics of As(V) and As(III) was well described (R² of up to 0.99) by the pseudo second-order model on surface of the X-WMR. Thermodynamic investigations revealed that As(V) and As(III) sorption was endothermic and spontaneous. The FTIR spectroscopy depicted the presence of different surface function groups (OH, COOH, S-bearing (C=S, S=O and S-S)) which were involved in As(V) and As(III) sequestration on the sorbents examined here. Significantly, X-WMR showed (up to 49%) greater As(III) and As(V) sorption than that of natural WMR. Our results demonstrated that X-WMR efficiently removed 94%-100% (n = 16) of As from As-contaminated drinking well water which possessed detectable concentrations of some anions (e.g., SO₄, CO₃, HCO₃). This study highlights that the X-WMR has potential to remove As, notably As(III), from solutions and drinking water, and might be utilized as a reactive medium for the treatment of As-contaminated water.

Removal of trace thorium(IV) from aqueous solutions using a pseudo-polyrotaxane

The adsorption of thorium(IV) was studied using a pseudo-polyrotaxane, which was obtained by the reaction of poly(propyleneglycol) (PPG) and 6-OTs-β-CD. The adsorption of thorium(IV) was examined as a function of the contact time, pH of the solution, adsorbent dose, concentration of thorium(IV) and temperature using batch adsorption experiments. The experimental results suggested that the optimum conditions were found to be at pH 3.5, contact time 40 min, 10 mg adsorbent doses, 20 mg L−1 thorium(IV) concentration and 298 K. The maximum adsorption capacity was found to be 15.366 mg g−1. The thermodynamic parameters (ΔG 0<0, ΔH 0<0) were calculated, the result showed that the adsorption of thorium(IV) was exothermic and spontaneous process.

Characterization, kinetics and thermodynamics of biosynthesized uranium nanoparticles (UNPs)

The present study was carried out to explore the potential of the isolated bacterial strains isolated from Gabal El Sela in Eastern Dessert, Egypt for biosynthesis of uraninite nanoparticles intracellularly. The most potent bacterial strains associated (intra) with uranium nanoparticles were characterized by transmission electron microscope (TEM), Fourier transform infrared (FTIR) and Energy Dispersive X-ray (EDX). Studying factors affecting biosynthesis of uranium nanoparticles indicated that the optimum conditions were 6000 ppm uranium concentrations at pH 7.0 and temperature 30 °C ± 1 after five days with 10% biomass under shaking conditions and the maximum uranium uptake by MAM - U9 cells was 3300 ppm (55%) from uranyl nitrate solution and 3600 ppm (72%) from Sela rock sample. Results of TEM micrograph show those uranium nanoparticles (UNPs) with size ranging from 2.9 to 21.13 nm inside cells. The kinetics, isotherm and thermodynamics parameters of uranium uptaken by bacterial strain MAM -U9 have been determined and found to be a first order process (R² = 9935), follows Langmuir isotherm (R_L² = 0.998) and the thermodynamics of ΔG = -9.715 kJmol^-1, ΔH = 16.987 kJmol^-1 and ΔS = 0.0881 kJmol^-1K^-1 at 30 °C.

Preparation, characterization, uranium (VI) biosorption models, and conditions optimization by response surface methodology (RSM) for amidoxime-functionalized marine fungus materials

Amidoxime-functionalized marine fungus Fusarium sp. #ZZF51 (ZGDA) was synthesized and studied to adsorb uranium (VI) from the aqueous solution. Different instrumental techniques such as FTIR, SEM, and TGA were employed for the characterization of the manufactured materials, and theirs ability of removal uranium (VI) was optimized using RSM. The experimental results showed the maximum adsorption capacity for the synthesized materials was 230.78 mg g−1 at the following optimization conditions: S–L ratio 150 mg L−1, pH 5.13, uranium (VI) initial concentration 40 mg L−1, and equilibrium time 122.40 min. More than 85% of the absorbed uranium (VI) could be desorbed by 0.5 or 1.0 mol L−1 HCl, and the modified mycelium could be reused at least five times. The thermodynamic experimental data of adsorption uranium (VI) could fit better with Langumir and Freundlich isotherms models, and the pseudo-second-order model was better to interpret the kinetics process. The modified fungus materials exhibited the better sorption capacity for uranium (VI) in comparison with raw biomass should be attributed to the strong chelation of amidoxime to uranium (VI) ions.

Preparation of magnetic porous NiFe2O4/SiO2 composite xerogels for potential application in adsorption of Ce(iv) ions from aqueous solution

In this work, a novel magnetic porous adsorbent was prepared via a sol–gel method for the removal of Ce(iv) from aqueous solution.

Revealing crosstalk of plant and fungi in the symbiotic roots of sewage-cleaning Eichhornia crassipes using direct de novo metatranscriptomic analysis

Cultivation and environmental changes can induce development of novel phenotypes in plants. For example, the root morphology of cultivated purple root Eichhornia crassipes differs remarkably from normal Eichhornia crassipes and also shows an enhanced ability to absorb heavy metal from groundwater. However, the changes in gene expression associated with these processes are unknown because of the lack of information on its large and unsequenced genome and its complex plant-rhizosphere symbiotic system. To investigate these gene expression changes, we applied a new strategy, direct de novo metatranscriptome analysis. Using this approach, we assembled the metatranscriptome of the entire rhizosphere and identified species-specific differentially expressed genes (DEGs) via hyper-accurate algorithms, showing a polarized plant/fungus distribution: the plant genes were responsible for morphological changes to the root system, offering a greater volume and surface area that hosts more fungi; while genes associated with heavy metal response in the fungus Fusarium were upregulated more than 3600-fold. These results suggested a distinct and synergistic functional response by the plant and fungal transcriptomes, indicating significant plant/fungal crosstalk during environmental changes. This study demonstrates that the metatranscriptomic approach adopted here offers a cost-efficient strategy to study symbiosis systems without the need for a priori genomic knowledge.

Adsorption and recovery of U(vi) from low concentration uranium solution by amidoxime modified Aspergillus niger

Amidoxime modified Aspergillus niger (AMAN) was prepared by the oximation reaction.