Titanium determination by multisyringe flow injection analysis system and a liquid waveguide capillary cell in solid and liquid environmental samples

An innovative approach in titanium determination based on incorporating 2-amino-4-((4-nitrophenyl)diazenyl)pyridine-3-ol in a PVC membrane

A pioneering optical sensor has been effectively developed to achieve precise and reliable detection of titanium ions. The sensor employs an optode membrane composed of 2-amino-4-((4-nitrophenyl)diazenyl)pyridine-3-ol (ANPDP) and sodium tetraphenylborate (NaTPB) incorporated into a plasticized PVC matrix, with dioctyl sebacate (DOS) acting as the plasticizer. When exposed to Ti4+ ions at pH 8.25, the color of the sensing membrane undergoes a distinctive transformation from yellow-orange to violet. Extensive investigations were carried out to assess and optimize various factors influencing the efficiency of ion uptake. Through careful experimentation, the optimum conditions were determined to be 60.0% DOS, 6.0% ANPDP, 30% PVC, and 4.0% NaTPB, with a rapid response time of 5.0 min. Within these conditions, the developed optode demonstrates an impressive linear range of 3.0-225 ng mL-1, boasting detection (LOD) and quantification (LOQ) limits of 0.91 and 2.95 ng mL-1, respectively. Moreover, the precision of the sensor, as indicated by the relative standard deviation (RSD%), remained consistently below 1.55% in six replicate determinations of 100 ng mL-1 Ti4+ across diverse membranes. The selectivity of the sensor was rigorously examined for a range of cations and anions, successfully establishing the tolerance limits for interfering species. Notably, the presence of EDTA as a masking agent did not compromise the high selectivity of the sensor. Consequently, the innovative probe holds significant potential as a reliable analytical tool for quantifying titanium content in various samples, including water, geological materials, soil, plants, paints, cosmetics, and plastics.

Determination of Picomolar Titanium in Seawater by Isotope Dilution Multicollector Inductively Coupled Plasma Mass Spectrometry after Mg(OH)2 Coprecipitation

A new isotope dilution inductively coupled plasma mass spectrometry (ICPMS) method is developed to determine picomolar concentrations of titanium (Ti) in seawater. The method applies Mg(OH)₂ coprecipitation to concentrate Ti from seawater, and uses a new ⁴⁹Ti-⁴⁷Ti isotope dilution to eliminate the need for separating Ti from seawater Ca, resulting in an isobaric interference-free analysis by high-resolution multicollector ICPMS. The method uses a 1.8 mL seawater sample with a detection limit of 1.6 pmol L^-1 that is determined mainly by Ti contamination during sample preparation rather than by ICPMS sensitivity, instrumental Ti background, or isobaric interferences. An oceanographically consistent vertical profile of dissolved Ti in the Sargasso Sea near Bermuda is measured with this method.

Spectrophotometric flow injection determination of dissolved titanium in seawater exploiting in-line nitrilotriacetic acid resin preconcentration and a long path length liquid waveguide capillary cell

A sensitive spectrophotometric method for the determination of dissolved titanium (Ti) in seawater is developed. It involves in-line preconcentration and a long path length liquid waveguide capillary cell (LWCC). Nitrilotriacetic acid (NTA) resin is used to preconcentrate Ti from ∼25 mL seawater sample at pH 1.7, and elution is accomplished with 0.8 mol L^-1 hydrochloride acid. The eluted Ti solution is buffered to pH 6.0 with 1.0 mol L^-1 ammonium acetate and mixed with 1.5 mmol L^-1 Tiron solution. The mixture is then injected into LWCC and measured by spectrophotometry at 420 nm. Before the preconcentration step, the sample is treated with 7 mmol L^-1 ascorbic acid to reduce Fe(III) to Fe(II), in order to eliminate the Fe interference. The method is not interfered by Fe(III) and Cu(II) present in seawater samples at concentrations 50-fold higher in relation to Ti, and by Cd(II), Pb(II), Cr(VI), Mn(II), Al(III), Zn(II), and Ni(II) at concentrations 100-fold higher in relation to Ti. It is time efficient (7.5 minutes per sample), sensitive (0.10 nmol L^-1 detection limit), precise (1.40% measurement RSD at 1.00 nmol L^-1 Ti) and is characterized by a linear range of 0.50-5.00 nmol L^-1 Ti. The method was applied to analysis of natural water samples collected from the Jiulongjiang Estuary, Fujian, China.

Toxicity of TiO2, in nanoparticle or bulk form to freshwater and marine microalgae under visible light and UV-A radiation

Use of titanium dioxide nanoparticles (TiO₂ NPs) has become a part of our daily life and the high environmental concentrations predicted to accumulate in aquatic ecosystems are cause for concern. Although TiO₂ has only limited reactivity, at the nanoscale level its physico-chemical properties and toxicity are different compared with bulk material. Phytoplankton is a key trophic level in fresh and marine ecosystems, and the toxicity provoked by these nanoparticles can affect the structure and functioning of ecosystems. Two microalgae species, one freshwater (Chlamydomonas reinhardtii) and the other marine (Phaeodactylum tricornutum), have been selected for testing the toxicity of TiO₂ in NP and conventional bulk form and, given its photo-catalytic properties, the effect of UV-A was also checked. Growth inhibition, quantum yield reduction, increase of intracellular ROS production, membrane cell damage and production of exo-polymeric substances (EPS) were selected as variables to measure. TiO₂ NPs and bulk TiO₂ show a relationship between the size of agglomerates and time in freshwater and saltwater, but not in ultrapure water. Under two treatments, UV-A (6 h per day) and no UV-A exposure, NPs triggered stronger cytotoxic responses than bulk material. TiO₂ NPs were also associated with greater production of reactive oxygen species and damage to membrane. However, microalgae exposed to TiO₂ NPs and bulk TiO₂ under UV-A were found to be more sensitive than in the visible light condition. The marine species (P. tricornutum) was more sensitive than the freshwater species, and higher Ti internalization was measured. Exopolymeric substances (EPS) were released from microalgae in the culture media, in the presence of TiO₂ in both forms. This may be a possible defense mechanism by these cells, which would enhance processes of homoagglomeration and settling, and thus reduce bioavailability.

Are sunscreens a new environmental risk associated with coastal tourism?

The world coastal-zone population and coastal tourism are expected to grow during this century. Associated with that, there will be an increase in the use of sunscreens and cosmetics with UV-filters in their formulation, which will make coastal regions worldwide susceptible to the impact of these cosmetics. Recent investigations indicate that organic and inorganic UV-filters, as well as many other components that are constituents of the sunscreens, reach the marine environment--directly as a consequence of water recreational activities and/or indirectly from wastewater treatment plants (WWTP) effluents. Toxicity of organic and inorganic UV filters has been demonstrated in aquatic organism. UV-filters inhibit growth in marine phytoplankton and tend to bioaccumulate in the food webs. These findings together with coastal tourism data records highlight the potential risk that the increasing use of these cosmetics would have in coastal marine areas. Nevertheless, future investigations into distribution, residence time, aging, partitioning and speciation of their main components and by-products in the water column, persistence, accumulation and toxicity in the trophic chain, are needed to understand the magnitude and real impact of these emerging pollutants in the marine system.

Sunscreens as a source of hydrogen peroxide production in coastal waters

Sunscreens have been shown to give the most effective protection for human skin from ultraviolet (UV) radiation. Chemicals from sunscreens (i.e., UV filters) accumulate in the sea and have toxic effects on marine organisms. In this report, we demonstrate that photoexcitation of inorganic UV filters (i.e., TiO2 and ZnO nanoparticles) under solar radiation produces significant amounts of hydrogen peroxide (H2O2), a strong oxidizing agent that generates high levels of stress on marine phytoplankton. Our results indicate that the inorganic oxide nanoparticle content in 1 g of commercial sunscreen produces rates of H2O2 in seawater of up to 463 nM/h, directly affecting the growth of phytoplankton. Conservative estimates for a Mediterranean beach reveal that tourism activities during a summer day may release on the order of 4 kg of TiO2 nanoparticles to the water and produce an increment in the concentration of H2O2 of 270 nM/day. Our results, together with the data provided by tourism records in the Mediterranean, point to TiO2 nanoparticles as the major oxidizing agent entering coastal waters, with direct ecological consequences on the ecosystem.