Effect of rhamnolipid biosurfactant on solubilization of polycyclic aromatic hydrocarbons

The efficiency of micellar solubilization of naphthalene from aqueous solutions using rhamnolipid as a biological surfactant according to NMR diffusometry

The micellar solubilization of naphthalene from its saturated aqueous solutions using the biosurfactant rhamnolipid was studied. Using the NMR diffusion method, selective measurements of the self-diffusion coefficients of molecules of all components of the solution-naphthalene, rhamnolipid, and water-were carried out at various rhamnolipid concentrations from 0.06 to 100 g/L. Based on the results of diffusometry, the distribution of naphthalene molecules between the states free in solution and states bound by micelles was found. With an increase in the concentration of rhamnolipids, the proportion of bound naphthalene molecules increases from 50% at CRL = 2 g/L to 100% at CRL ≥ 50 g/L. The micelle-water partition coefficient Km and the molar solubilization ratio MSR were calculated.

Microbe cultivation guidelines to optimize rhamnolipid applications

In the growing landscape of interest in natural surfactants, selecting the appropriate one for specific applications remains challenging. The extensive, yet often unsystematized, knowledge of microbial surfactants, predominantly represented by rhamnolipids (RLs), typically does not translate beyond the conditions presented in scientific publications. This limitation stems from the numerous variables and their interdependencies that characterize microbial surfactant production. We hypothesized that a computational recipe for biosynthesizing RLs with targeted applicational properties could be developed from existing literature and experimental data. We amassed literature data on RL biosynthesis and micellar solubilization and augmented it with our experimental results on the solubilization of triglycerides (TGs), a topic underrepresented in current literature. Utilizing this data, we constructed mathematical models that can predict RL characteristics and solubilization efficiency, represented as logPRL = f(carbon and nitrogen source, parameters of biosynthesis) and logMSR = f(solubilizate, rhamnolipid (e.g. logPRL), parameters of solubilization), respectively. The models, characterized by robust R2 values of respectively 0.581-0.997 and 0.804, enabled the ranking of descriptors based on their significance and impact-positive or negative-on the predicted values. These models have been translated into ready-to-use calculators, tools designed to streamline the selection process for identifying a biosurfactant optimally suited for intended applications.

Surface-active antibiotic production as a multifunctional adaptation for postfire microorganisms

Wildfires affect soils in multiple ways, leading to numerous challenges for colonizing microorganisms. Although it is thought that fire-adapted microorganisms lie at the forefront of postfire ecosystem recovery, the specific strategies that these organisms use to thrive in burned soils remain largely unknown. Through bioactivity screening of bacterial isolates from burned soils, we discovered that several Paraburkholderia spp. isolates produced a set of unusual rhamnolipid surfactants with a natural methyl ester modification. These rhamnolipid methyl esters (RLMEs) exhibited enhanced antimicrobial activity against other postfire microbial isolates, including pyrophilous Pyronema fungi and Amycolatopsis bacteria, compared to the typical rhamnolipids made by organisms such as Pseudomonas spp. RLMEs also showed enhanced surfactant properties and facilitated bacterial motility on agar surfaces. In vitro assays further demonstrated that RLMEs improved aqueous solubilization of polycyclic aromatic hydrocarbons, which are potential carbon sources found in char. Identification of the rhamnolipid biosynthesis genes in the postfire isolate, Paraburkholderia kirstenboschensis str. F3, led to the discovery of rhlM, whose gene product is responsible for the unique methylation of rhamnolipid substrates. RhlM is the first characterized bacterial representative of a large class of integral membrane methyltransferases that are widespread in bacteria. These results indicate multiple roles for RLMEs in the postfire lifestyle of Paraburkholderia isolates, including enhanced dispersal, solubilization of potential nutrients, and inhibition of competitors. Our findings shed new light on the chemical adaptations that bacteria employ to navigate, grow, and outcompete other soil community members in postfire environments.

Characterization and Production of a Biosurfactant Viscosin from Pseudomonas sp. HN11 and its Application on Enhanced oil Recovery During oily Sludge Cleaning

Biosurfactants are renewable resources with versatile applications on environmental bioremediation and industrial processes. Pseudomonas species are one of the promising biosurfactant producers. However, besides rhamnolipids, little is known about Pseudomonas-derived biosurfactants on solubilization of polycyclic aromatic hydrocarbons (PAHs) and oily sludge treatment. In this study, Pseudomonas sp. HN11-derived biosurfactant was purified by chromatographic methods and was characterized as viscosin via bioinformatic analysis, spectrometric and spectroscopic analyses, Marfey's method and (C-H)α NMR fingerprint matching approach. Viscosin is a potent biosurfactant with critical micelle concentration of 5.79 mg/L and is stable under various stresses. Moreover, viscosin was produced at 0.42 g/L at 48 h of liquid fermentation. Further data have shown that emulsifying agent viscosin is capable of promoting the solubilization of PAHs and displays enhanced oil recovery during oily sludge treatment. More specifically, viscosin has shown significantly enhanced solubilization on fluoranthene compared with control (0.04 mg/L), 2.21 mg/L and 1.27 mg/L fluoranthene was recovered from 100 mg/L and 200 mg/L viscosin treatment, respectively. However, only 200 mg/L viscosin has significantly enhanced the solubilization of phenanthrene (0.75 mg/L) and benzo[a]pyrene (0.51 mg/L) compared to each control (0.23 mg/L for phenanthrene and 0.09 mg/L for benzo[a]pyrene). Viscosin treatment of oily sludge (recovering of 0.58 g oil) has shown a significant oil recovery compared to that of control (recovering of 0.42 g oil). This study shows the great potential of viscosin-type biosurfactant on oily sludge treatment.

Potential of some microbial isolates on diesel hydrocarbons removal, bio surfactant production and biofilm formation

Potential of Arthrobacter citreus B27Pet, Bacillus thuringiensis B48Pet and Candida catnulata to produce biosurfactant using four different carbon sources (naphthalene, hexadecane, diesel and petroleum crude oil) was investigated. Removal of petroleum crude oil from aqueous culture and degradation of diesel were also determined using single and mixed culture of strains. The biofilm existence in single and mixed culture of strains was considered using naphthalene, hexadecane and diesel in culture medium. Cell surface hydrophobicity of A. citreus was higher than other isolates which also showed maximum surface tension reduction and emulsification index. As a whole, remarkable biosurfactant production occurred using petroleum crude oil as a carbon source in medium. A. citreus was found to be more robust than other tested strains in removal efficiency of crude oil due to its biosurfactant production capability. Statistically significant positive correlation was observed between biofilm existence and surface tension using diesel and hexadecane as carbon source. Overall diesel biodegradation efficiency by the mix culture of three applied strains was about 75% within a short period of time (10 days) which was accompanied with high biofilm production.

Valorization of oily sludge waste using biosurfactant-producing bacteria

Oily sludge generated by the petroleum industry is not only an environmental hazard, but since it contains crude oil too, it is a valuable resource as well. This study demonstrates a methodology for the valorization of the oily sludge that allows the recovery of oil fractions by the action of microbes producing surface-active metabolites. Two bacterial isolates were used in the study that were producing different biosurfactants, identified via FTIR analysis as well as through genomic mapping of the biosurfactant pathways using RAST, ANTISMASH 7.0, STRING databases. Serratia spp. AKBS12, produced a mono-rhamnolipid, while Acinetobacter spp. AKBS16, produced emulsan. Although recovery efficiency of both biosurfactants was similar, the recovery profile with respect to the class of hydrocarbons differed. The rhamnolipid produced by Serratia spp. AKBS12 extracted mono-chained paraffins and linear alkanes, while emulsan, produced by Acinetobacter spp. AKBS16 could extract heavier paraffins. The extraction procedure is simple and involves mixing the biosurfactant with oily sludge at a temperature of 30 °C with an incubation of 9 days. Sulphuric acid precipitation releases the oil trapped in the oily sludge. The study is the first step in developing user-friendly, innovative technologies that can be linked to the concept of a circular economy.

Rhamnolipid Biosurfactant: Use for the Removal of Phenol from Aqueous Solutions by Micellar Solubilization

Selective measurements of the self-diffusion coefficients of molecules of the biological surfactant rhamnolipid (RL) in individual aqueous solutions and in solutions with phenol as a solubilizate were carried out by nuclear magnetic resonance (NMR) diffusometry. Based on the obtained results, the solubilization characteristics of RLs were calculated. They are the fraction of solubilized phenol molecules, the phenol micelle-water distribution coefficient, the molar solubilization coefficient, the hydrodynamic radii of RL monomers and micelles, the aggregation numbers of micelles, and the solubilization capacity of micelles. Fraction of the solubilized phenol molecules increases and approaches 80-90% with increasing RL concentration. The solubilization capacity of the micelles increases from several units to 102 with an increase in both the concentration of RLs and the concentration of phenol in solution.

Surface-active antibiotic production is a multifunctional adaptation for postfire microbes

Wildfires affect soils in multiple ways, leading to numerous challenges for colonizing microbes. While it is thought that fire-adapted microbes lie at the forefront of postfire ecosystem recovery, the specific strategies that these microbes use to thrive in burned soils remain largely unknown. Through bioactivity screening of bacterial isolates from burned soils, we discovered that several Paraburkholderia spp. isolates produced a set of unusual rhamnolipid surfactants with a natural methyl ester modification. These rhamnolipid methyl esters (RLMEs) exhibited enhanced antimicrobial activity against other postfire microbial isolates, including pyrophilous Pyronema fungi and Amycolatopsis bacteria, compared to the typical rhamnolipids made by organisms such as Pseudomonas spp . RLMEs also showed enhanced surfactant properties and facilitated bacterial motility on agar surfaces. In vitro assays further demonstrated that RLMEs improved aqueous solubilization of polycyclic aromatic hydrocarbons, which are potential carbon sources found in char. Identification of the rhamnolipid biosynthesis genes in the postfire isolate, Paraburkholderia caledonica str. F3, led to the discovery of rhlM , whose gene product is responsible for the unique methylation of rhamnolipid substrates. RhlM is the first characterized bacterial representative of a large class of integral membrane methyltransferases that are widespread in bacteria. These results indicate multiple roles for RLMEs in the postfire lifestyle of Paraburkholderia isolates, including enhanced dispersal, solubilization of potential nutrients, and inhibition of competitors. Our findings shed new light on the chemical adaptations that bacteria employ in order to navigate, grow, and outcompete other soil community members in postfire environments.

Significance Statement

Wildfires are increasing in frequency and intensity at a global scale. Microbes are the first colonizers of soil after fire events, but the adaptations that help these organisms survive in postfire environments are poorly understood. In this work, we show that a bacterium isolated from burned soil produces an unusual rhamnolipid biosurfactant that exhibits antimicrobial activity, enhances motility, and solubilizes potential nutrients derived from pyrolyzed organic matter. Collectively, our findings demonstrate that bacteria leverage specialized metabolites with multiple functions to meet the demands of life in postfire environments. Furthermore, this work reveals the potential of probing perturbed environments for the discovery of unique compounds and enzymes.

Micellar and solubilizing properties of rhamnolipids

We studied the micellar and solubilizing properties of aqueous solutions of unfractionated rhamnolipids produced by Pseudomonas aeruginosa. We used nuclear magnetic resonance (NMR) diffusometry, dynamic light scattering, and conductometry to measure the critical micelle concentration (CMC) of rhamnolipid solutions and determined the effective hydrodynamic radii of rhamnolipid monomers and micelles. Based on selective measurements of the self-diffusion coefficients of molecules, performed by NMR diffusometry, the solubilizing properties of rhamnolipids were studied depending on their concentration in solution; aromatic hydrocarbons, benzene, toluene, ethylbenzene, and para-xylene were taken as solubilizates. On the basis of the measurement results, we estimated the distribution coefficient of the solubilizate between the micellar (solubilized) and free (in the aqueous phase) states and the solubilizing capacity of rhamnolipid micelles.

A novel technology of solarization and phytoremediation enhanced with biosurfactant for the sustainable treatment of PAH-contaminated soil

Hydrocarbon-contaminated land has been a significant issue throughout Nigeria's Niger Delta since the discovery of crude oil in 1956. This paper proposes a novel and sustainable technique involving soil solarization, phytoremediation and biosurfactant to treat polycyclic aromatic hydrocarbon (PAH) contamination. The treatment effect on PAH reduction, plant growth, rhizosphere microorganisms and their enzymatic activities was evaluated. Twenty-eight days of solarization was carried out before the introduction of Chromolaena odorata seedlings for an 84-day phytoremediation period using a 4 × 4 (vegetated) and 2 × 4 (non-vegetated) cell microcosms to simulate the Niger Delta's subtropical conditions. Soil solarization resulted in significant PAH reduction (p ≤ 0.01) of phenanthrene, fluoranthene and benzo(a)pyrene with means reduction of 60.0%, 38.7% and 36.1% compared to their non-solarized counterparts with 18.0%, 18.0% and 18.8% at 95% CI (32.7, 51.3), (15.4, 26.1) and (8.0, 26.6), respectively. In post-solarization, all solarized and vegetated treatment groups significantly reduced (p ≤ 0.01) PAHs compared to their respective counterparts, while biosurfactant contribution in this combination was negligible (p ≥ 0.05). The growth parameters of C. odorata, total soil/rhizosphere heterotrophic microorganisms and their enzymatic activities of dehydrogenase and urease increased in all solarized treatments indicating essential biochemical processes. The novel and successful integration of soil solarization and phytoremediation using indigenous C. odorata as a combined technique to treat even the most recalcitrant form of hydrocarbons (PAHs) brings up new opportunities for a sustainable method of cleaning up contaminated land in Nigeria's oil-rich Niger Delta.

Surfactant-enhanced bioremediation of petroleum-contaminated soil and microbial community response: A field study

Surfactant-enhanced bioremediation (SEBR) is frequently employed to clean up soil polluted with petroleum hydrocarbons, but few studies have focused on how surfactants affect microbial communities and different fractions of petroleum hydrocarbons, particularly in the field. Here, the surfactants sodium dodecyl benzene sulfonate (SDBS), alpha olefin sulfonate (AOS), Triton X-100 (TX-100), Tween80, and rhamnolipid were combined with the oil-degrading bacterium Pseudomonas sp. SB to remediate oil-contaminated soil in the laboratory. AOS gave the highest removal efficiency (65.1%) of total petroleum hydrocarbons (TPHs). Therefore, AOS was used in a field experiment with Pseudomonas sp. SB and the removal efficiency of TPHs and long-chain hydrocarbons C21-C40 reached 57.4 and 53.0%, respectively, significantly higher than the other treatments. During bioremediation the addition of Pseudomonas sp. SB significantly stimulated the growth of bacterial genera such as Alcanivorax, Luteimonas, Parvibaculum, Stenotrophomonas, and Pseudomonas and AOS further stimulated the growth of Sphingobacterium, Pseudomonas and Alcanivorax. This study validates the feasibility of surfactant-enhanced bioremediation in the field and partly reveals the mechanism of surfactant-enhanced bioremediation from the perspective of changes in different fractions of petroleum and microbial community dynamics.

Polycyclic aromatic hydrocarbons remobilization from contaminated porous media by (bio)surfactants washing

Biosurfactants, surface-active agents produced by microorganisms, are increasingly studied for their potential use in soil remediation processes because they are more environmentally friendly than their chemically produced homologues. In this work, we report on the use of a crude biosurfactant produced by a bacterial consortium isolated from a PAHs-contaminated soil, compared with other (bio)surfactants (Tween80, Sodium dodecyl sulfate - SDS, rhamnolipids mix), to wash PAHs from a contaminated porous media. Assays were done using columns filled with sand or sand-clay mixtures (95:5) spiked with four model PAHs. The crude biosurfactant showed less adsorption to the [sand] and the [sand + clay] columns compared to Tween 80, SDS and the rhamnolipid mix. The biosurfactant showed the second best capacity to remove PAHs from the columns (as dissolved and particulate phases), both from [sand] and [sand + clay], after SDS when applied at lower concentrations than the other sufactants. The effluent concentrations of phenanthrene (PHE), pyrene (PYR) and benzo[a]pyrene (BAP) increased in the presence of the crude biosurfactant. Compared to the control experiment using only water, the global PAHs washed mass (amount of PAHs removed from the columns) increased between 9 and 1000 times for PHE and BAP in the [sand] column, and between 55 and 6000 times respectively for PHE and BAP in the [sand + clay] columns. Moreover, in the [sand + clay] columns, leaching of a part of the clays was observed in the SDS and the biosurfactant injections assays. This clay leaching resulted in higher PAHs removal, due not to desorption but rather to particulate transport. In the context of washing PAH-contaminated soils in biopiles or subsurface remediation, our results could help in sizing the remediation approach using an environmental friendly biosurfactant, before a pump-and-treat process.

Effects of three surfactants on the degradation and environmental risk of metolachlor in aquatic environment

Surfactants and pesticides can be simultaneously detected in the environment by the reason of their widespread use and large amounts of emissions. Due to the special amphipathicity of surfactants, it may have special effects on the environmental behaviors and toxic effects of other substances in the environment. There are few relevant studies at present. In this study, the effects of three surfactants on the degradation of the amide pesticide metolachlor in water-sediment system were investigated. The study found that the three surfactants had no significant effect on the degradation of metolachlor in the system at environmental concentrations. However, at critical micelle concentration, cationic surfactant octadecyl trimethyl ammonium bromide and nonionic surfactant nonylphenol polyoxyethylene ether promoted the degradation of metolachlor in water-sediment system. Anionic surfactant odium dodecylbenzene sulfonate (SDBS) prolonged the degradation half-life of metolachlor. The presence of surfactants not only affected the environmental behavior of pesticides. When they coexisted with pesticides, the joint toxicity to aquatic organisms cannot be ignored. This study found that the combined effects of three surfactants and metolachlor on the acute developmental toxicity of zebrafish embryos were all synergistic effects. The combined effects of two ionic surfactants and metolachlor on the acute toxicity of adult zebrafish were synergistic effects. Further study showed that co-exposure of SDBS and metolachlor increased the absorption of metolachlor by zebrafish. Combined exposure of SDBS and metolachlor caused oxidative stress in brain, gill and liver of zebrafish. The results showed that the simultaneous presence of anionic surfactants and pesticides in the environment may increase the environmental risk of pesticides.

Improved remediation of co-contaminated soils by heavy metals and PAHs with biosurfactant-enhanced soil washing

Due to the huge toxicity of co-contaminated soil with PAHs and heavy metals and the complexity of their remediation, it is thus critical to take effective remediation actions to remove heavy metals and PAHs simultaneously from the co-contaminated soil. Biosurfactant-enhanced soil washing (BESW) were investigated in this study for remediation of soil co-contaminated with phenanthrene (PHE) and cadmium (Cd). The co-existence of PHE and Cd caused the change of the structure of soil and rhamnolipid micelle, which lead to different removal rate of PHE and Cd from co-contaminated soil compared with single contaminated soil. The results of FT-IR and NMR showed that PHE entered micelles of rhamnolipid and Cd formed the complexation with the external carboxyl groups of rhamnolipid micelle. We also found that pH, concentration of rhamnolipid solution, temperature and ionic strength had influence on co-contaminated soil remediation. The effects of above mentioned four factors on co-contaminated soil remediation in BESW processes were analyzed by using Taguchi design of experiment method. Taguchi based Grey Relational Analysis was conducted to identify the optimal remediation conditions, which included pH = 9, concentration of rhamnolipid = 5 g/L, temperature = 15 °C and ionic strength = 0.01 M. Under the optimal conditions for BESW, removal rates of cadmium and phenanthrene reached 72.4% and 87.8%, respectively in co-contaminated soil.

Interaction quantitative modeling of mixed surfactants for synergistic solubilization by resonance light scattering

In situ flushing through surfactant-enhanced aquifer remediation (SEAR) technology has long been recognized as a promising technique for NAPL removal from contaminated aquifers. However, there have been few studies on the choice of surfactants. In this work, the interaction quantitative model between resonance light scattering intensity and the concentration of binary surfactant mixtures NP-10+SDBS and NP-10+CTAB was established, and the mechanism of binary surfactant interaction was explored through the model by the resonance light scattering method. The relationship between the model constants and NAPL solubilization was also investigated to better address the application of surfactants in practical NAPL-contaminated site remediation. The critical micelle concentrations (CMCs) of nonylphenol ethoxylate (NP-10), dodecyl benzene sulfonate (SDBS), hexadecyl trimethyl ammonium bromide (CTAB), and the binary surfactant mixtures were measured by resonance light scattering (RLS), which were consistent with those obtained from surface tension measurements. In all cases, the RLS signals exhibited similar variations with surfactant concentration. A quantitative calculation model based on the RLS measurement data was established, and the binding constants K_NP-10+SDBS and K_NP-10+CTAB were calculated to be 0.66 and 1.51 L·mmol^-1, respectively, according to the equilibrium equations. The results showed that the binding constants have a significant positive correlation with NAPL solubilization.

Isolation and Characterization of a Biosurfactant Producing Strain Planococcus sp. XW-1 from the Cold Marine Environment

One cold-adapted strain, named Planococcus sp. XW-1, was isolated from the Yellow Sea. The strain can produce biosurfactant with petroleum as sole source of carbon at low temperature (4 °C). The biosurfactant was identified as glycolipid-type biosurfactant species by thin-layer chromatography (TLC) and Fourier transform infrared spectroscopy (FTIR). It reduced the surface tension of water to 26.8 mN/m with a critical micelle concentration measurement of 60 mg/L. The produced biosurfactant possesses high surface activity at wide ranges of temperature (-18-105 °C), pH values (2-12), and salt concentrations (1-18%). The biosurfactant exhibited higher surface activity and higher growth rate of cells with hexadecane and diesel as carbon source. The strain Planococcus sp. XW-1 was also effective in degrading crude oil, after 21 days of growth at 4 °C in medium with 1% crude oil and 1% (v/v) bacteria broth, 54% of crude oil was degraded. The results suggest that Planococcus sp. XW-1 is a promising candidate for use in the bioremediation of petroleum-contaminated seawater in the Yellow Sea during winter. This study reported for the first time that Planococcus isolated from the Yellow Sea can produce biosurfactant using petroleum as the sole carbon source at low temperature (4 °C), showing its ecological role in the remediation of marine petroleum pollution.

Effect of pyrene and phenanthrene in shaping bacterial communities in seagrass meadows sediments

Polycyclic aromatic hydrocarbons (PAHs), originating from anthropogenic and natural sources, are highly concerned environmental pollutants. This study investigated the impact of two model PAHs (pyrene and phenanthrene) on bacterial community succession in the seagrass meadows sediment in a lab-scale microcosm. Halophila ovalis sediment slurry microcosms were established, one group was placed as a control, and the other two were treated with pyrene and phenanthrene. Bacterial community succession in response to respective PAHs was investigated by 16S rRNA amplicon sequencing. The results demonstrated that bacterial diversity decrease in each microcosm during the incubation process; however, the composition of bacterial communities in each microcosm was significantly different. Proteobacteria (37-89%), Firmicutes (9-41%), and Bacteroides (7-21%) were the predominant group at the phylum levels. Their abundance varies during the incubation process. Several previously reported hydrocarbon-degrading genera, such as Pseudomonas, Spinghobium, Sphingobacterium, Mycobacterium, Pseudoxanthomonas, Idiomarina, Stenotrophomonas, were detected in higher abundance in pyrene- and phenanthrene-treated microcosms. However, these genera were distinctly distributed in the pyrene and phenanthrene treatments, suggesting that certain bacterial groups favorably degrade different PAHs. Statistical analyses, such as ANOSIM and PERMANOVA, also revealed that significant differences existed among the treatments' bacterial consortia (P < 0.05). This work showed that polycyclic aromatic hydrocarbon significantly affects bacterial community succession, and different PAHs might influence the bacterial community succession differently.

Rhamnolipids Application for the Removal of Vanadium from Contaminated Sediment

The use of biosurfactants in bioremediation of hydrocarbons and in the removal of heavy metals in crude oils is considered an attractive subject. The vanadium pollution in soil and sediments had attracted research interest in exploring eco-friendly methods of remediation. The present study was conducted to evaluate the potential of a biosurfactant to remove vanadium from artificially contaminated sand. The biosurfactant producer's strain selection process was carried out from 23 strains in two steps. In the primary screening, four preliminary tests were carried out: the emulsification index (24 and 72 h), the surface tension, and the rate of bacterial adhesion to hydrocarbons. In the secondary screening, the surface tension and rhamnolipids concentration were determined, also critical micellar concentration and dilution were calculated. The RNA 16s of selected strain was sequence and the strain was identified as Pseudomonas sp. By chromatographic and spectroscopic assays, the structure of the rhamnolipids was determined. The maximal vanadium removal efficiency (85.5%) was achieved with a rhamnolipids' concentration of 240 mg l^-1. The vanadium concentration was determined by spectroscopic technique. Rhamnolipids produced by this strain can potentially be used in the removal of vanadium.

Towards Rational Biosurfactant Design-Predicting Solubilization in Rhamnolipid Solutions

The efficiency of micellar solubilization is dictated inter alia by the properties of the solubilizate, the type of surfactant, and environmental conditions of the process. We, therefore, hypothesized that using the descriptors of the aforementioned features we can predict the solubilization efficiency, expressed as molar solubilization ratio (MSR). In other words, we aimed at creating a model to find the optimal surfactant and environmental conditions in order to solubilize the substance of interest (oil, drug, etc.). We focused specifically on the solubilization in biosurfactant solutions. We collected data from literature covering the last 38 years and supplemented them with our experimental data for different biosurfactant preparations. Evolutionary algorithm (EA) and kernel support vector machines (KSVM) were used to create predictive relationships. The descriptors of biosurfactant (logP_BS, measure of purity), solubilizate (logP_sol, molecular volume), and descriptors of conditions of the measurement (T and pH) were used for modelling. We have shown that the MSR can be successfully predicted using EAs, with a mean R² _val of 0.773 ± 0.052. The parameters influencing the solubilization efficiency were ranked upon their significance. This represents the first attempt in literature to predict the MSR with the MSR calculator delivered as a result of our research.

Performance and kinetics of benzo(a)pyrene biodegradation in contaminated water and soil and improvement of soil properties by biosurfactant amendment

As a hydrophobic pollutant, benzo(a)pyrene (BaP) is difficult to be degraded by microbes due to its poor water solubility. To improve its water solubility, this study harvested a biosurfactant from swine wastewater. The role of the biosurfactant in BaP biodegradation in contaminated water and soil were investigated. The biodegradation kinetics of BaP in contaminated water and the improvement of soil properties were determined. Results showed that critical micelle concentration (CMC) of the biosurfactant was 46.8 mg/L. The biosurfactant has a high pH stability in range of 3-9 and a strong salt stability in NaCl concentration range of 0-20%. At concentrations of 1, 2, 3, 4 and 5 CMC, the biosurfactant increased BaP water solubility by 1.4, 2.6, 4.0, 5.2 and 6.6 times. BaP biodegradation in contaminated water was effectively promoted by the biosurfactant, and the concentrations of BaP in sludge phase decreased to 1.015 mg/L (47.9% decrement) and 0.675 mg/L (65.4% decrement) when the dosed biosurfactant were 1 and 3 CMC, respectively. The biodegradation kinetics of BaP in contaminated water by the biosurfactant fitted well with the two-compartment kinetic model well (R² > 0.90). For the bioremediation of BaP contaminated soil, adding 0.1%-0.5% (w/w) biosurfactant biodegraded 39.2%-84.8% of BaP, while the control without biosurfactant was 24.2%. In addition, the application of the biosurfactant significantly improved the properties of the contaminated soil, behaved as the increase in microbial quantity, water holding capacity (WHC) and dehydrogenase (DH) activity of the soil. To sum up, the biosurfactant facilitated the BaP biodegradation and can be effectively used in in-site remediation of polycyclic aromatic hydrocarbons (PAHs) (BaP in this study) contaminated water and soil.

Synergistic Solubilization of Phenanthrene by Mixed Micelles Composed of Biosurfactants and a Conventional Non-Ionic Surfactant

This study investigated the solubilization capabilities of rhamnolipids biosurfactant and synthetic surfactant mixtures for the application of a mixed surfactant in surfactant-enhanced remediation. The mass ratios between Triton X-100 and rhamnolipids were set at 1:0, 9:1, 3:1, 1:1, 1:3, and 0:1. The ideal critical micelle concentration values of the Triton X-100/rhamnolipids mixture system were higher than that of the theoretical predicted value suggesting the existence of interactions between the two surfactants. Solubilization capabilities were quantified in term of weight solubilization ratio and micellar-water partition coefficient. The highest value of the weight solubilization ratio was detected in the treatment where only Triton X-100 was used. This ratio decreased with the increase in the mass of rhamnolipids in the mixed surfactant systems. The parameters of the interaction between surfactants and the micellar mole fraction in the mixed system have been determined. The factors that influence phenanthrene solubilization, such as pH, ionic strength, and acetic acid concentration have been discussed in the paper. The aqueous solubility of phenanthrene increased linearly with the total surfactant concentration in all treatments. The mixed rhamnolipids and synthetic surfactants showed synergistic behavior and enhanced the solubilization capabilities of the mixture, which would extend the rhamnolipids application.

Surfactant-enhanced aquifer remediation: Mechanisms, influences, limitations and the countermeasures

In recent years, surfactant-enhanced aquifer remediation (SEAR) has attracted increasing interest duo to the high efficiency of removing non-aqueous phase liquids (NAPLs) from aquifer. A thorough understanding of SEAR is necessary for its successful implementation in field remediation. This paper reviewed the SEAR technology in a comprehensive way based on the recent research advances. Firstly, an overview of the basic processes and mechanisms underlying the technology was presented. Secondly, applications of SEAR and the factors that influence the performance were summarized. Thirdly, the key limitations of SEAR, which are downward migration of dense-NAPLs, secondary pollution of surfactants, adsorptive, precipitative and partitioning loss of surfactants, and heterogeneity of the aquifer, were reviewed. Finally, the recent advances in modifying SEAR to overcome the limitations were discussed in detail. The review will promote our understanding of SEAR technology and provide some useful information to improve the performance of SEAR in applications.

Production of biosurfactant using the endemic bacterial community of a PAHs contaminated soil, and its potential use for PAHs remobilization

Biosurfactants are surface-active agents produced by microorganisms whose use in soil remediation processes is increasingly discussed as a more environmentally friendly alternative than chemically produced surfactants. In this work, we report the production of a biosurfactant by a bacterial community extracted from a polluted soil, mainly impacted by PAHs, in order to use it in a soil-washing process coupled with bioremediation. Nutrient balance was a critical parameter to optimize the production. Best conditions for biosurfactant production were found to be 20 g/L of glucose, 2 g/L of NH₄NO₃, and 14.2 g/L of Na₂HPO₄, corresponding to a C/N/P molar ratio equal to 13/1/2. Purification of the produced biosurfactant by acidification and double extraction with dichloromethane as a solvent allowed measuring the Critical Micellar Concentration (CMC) as equal to 42 mg/L. The capacity of the purified biosurfactant to increase the apparent solubility of four reference PAHs (naphthalene, phenanthrene, pyrene and benzo[a]pyrene) was completed. The solubilisation ratios, in mg of PAH/g of biosurfactant for phenanthrene, pyrene and benzo[a]pyrene are 0.214, 0.1204 and 0.0068, respectively. Identification of the bacteria found in the colony producing the biosurfactant showed the presence of bacteria able to produce biosurfactant (Enterobacteriaceae, Pseudomonas), as well as, others able to degrade PAHs (Microbacterium, Pseudomonas, Rhodanobacteraceae).

Co-solubilization of polycyclic aromatic hydrocarbon mixtures in aqueous micellar systems and its correlation with FRET for enhanced remediation processes

Surfactant enhanced remediation (SER) is an effective approach for decontaminating the PAH polluted soils. Solubilization and Cosolubilization of Phenanthrene (Ph), Pyrene (Py) and Perylene (Pe) as single, binary and ternary mixtures have been studied employing cationic (CTAB), anionic (SDS), non-ionic surfactant (Brij 30) and block copolymer (P123) micelles. In the single solute solubilization studies, solubility of Pe follows the order Brij 30 > CTAB > SDS whereas Ph or Py followed the order of CTAB > Brij 30 > SDS. In the cosolubilization studies, an increase, decrease or no change in the mutual solubility of PAHs was observed. Synergism in solubilization was observed most in P123 in both binary and ternary PAH mixture where more PAHs could get solubilized in the dense micellar shell region, thereby enhancing the micellar core volume leading to enhanced solubilization of PAHs. The solubilizates as pairs (Ph-Pe and Py-Pe) were further tested for any possible energy transfer in presence of surfactant based restricted host environments using spectrofluorometry and spectrophotometry. Based on the solubilization and cosolubilization an efficient non-radiative energy transfer (FRET) was observed between Ph/Py (donor) and Pe (acceptor) in the non-ionic surfactant system as well as in CTAB-Brij 58 mixed system. The results of this work may improve the effective utilization of surfactants in their correct evaluation for the removal of PAHs from contaminated soils or aquifers treated with SER technology.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Combination of rhamnolipid and biochar in assisting phytoremediation of petroleum hydrocarbon contaminated soil using Spartina anglica

Biochar (BC) and rhamnolipid (RL) is used in bioremediation of petroleum hydrocarbons, however, the combined effect of BC and RL in phytoremediation has not been studied until now. In this paper, the phytoremediation of petroleum hydrocarbon-contaminated soil using novel plant Spartina anglica was enhanced by the combination of biochar (BC) and rhamnolipid (RL). Samples of petroleum-contaminated soil (10, 30 and 50 g/kg) were amended by BC, BC+ RL and rhamnolipid modified biochar (RMB), respectively. After 60 day's cultivation, the removal rate of total petroleum hydrocarbons (TPHs) for unplanted soil (UP), planted soil (P), planted soil with BC addition (P-BC), planted soil with BC and RL addition (P-BC + RL) and planted soil with addition of RMB (P-RMB) were 8.6%, 19.1%, 27.7%, 32.4% and 35.1% in soil with TPHs concentration of 30 g/kg, respectively. Compared with UP, the plantation of Spartina anglica significantly decreased the concentration of C_8-14 and tricyclic PAHs. Furthermore, the application of BC and RMB alleviated the toxicity of petroleum hydrocarbons to Spartina anglica via improving plant growth with increasing plant height, root vitality and total chlorophyll content. High-throughput sequencing result indicated that rhizosphere microbial community of Spartina anglica was regulated by the application of BC and RMB, with increase of bacteria and plant mycorrhizal symbiotic fungus in biochar and RMB amended soil.

Desorption and solubilization of anthracene by a rhamnolipid biosurfactant from Rhodococcus fascians

The rhamnolipid biosurfactant-producing bacterium, strain SDRB-G7, was isolated from the sediment of Sindu-ri beach and identified as Rhodococcus fascians based on a phylogenetic analysis. Optimal activity, with the highest yield (2.441 g/L) and surface tension-reducing activity (24.38 mN/m), was observed when the cells were grown on olive oil as their sole source of carbon at pH 8.0. The rhamnolipid biosurfactant showed environmental stability at a variety of NaCl concentrations (2-20%) and pH values (2-12) even under acidic conditions. Of the initial anthracene, 66% was solubilized by 100% crude biosurfactant. Furthermore, 100% crude biosurfactant desorbed 81% of the anthracene in sediment into the aqueous phase. These results suggest that the rhamnolipid biosurfactant produced from R. fascians SDRB-G7 is a promising candidate for polycyclic aromatic hydrocarbon (PAH) removal from the sediment and can be an effective agent for processes that bioremediate PAHs such as surfactant-enhanced remediation. PRACTITIONER POINTS: Biosurfactants can accelerate desorption of PAHs and improve their solubility. BS-producing R. fascians SDRB-G7 was selected by screening of biochemical tests. Solubility of anthracene was enhanced by rhamnolipid produced by strain SDRB-G7. Microbial surfactant is a promising alternative for bioremediation of PAH-polluted sites.

Bioavailability of microplastic-bound pollutants in vitro: The role of adsorbate lipophilicity and surfactants

The potential role of microplastic particles (MPs) as vectors for lipophilic organic pollutants enhancing their uptake by organisms has repeatedly been discussed in the scientific community. Likewise, several studies indicate an important role of surfactants in pollutant-transfer from MP to organisms. Employing polyethylene particles, the bioavailability of three MP-bound inducers of 7-ethoxyresorufin-O-deethylase (EROD) with variable lipophilicity was quantitatively compared via EROD activity in RTL-W1 cells. In addition, non-cytotoxic surfactant concentrations of Pluronic F-127, rhamnolipids, sodium deoxycholate and sodium dodecyl sulfate (SDS) supplemented to the medium were tested for their effects on pollutant desorption from MPs as well as on cellular EROD induction. Bioavailability of MP-bound pollutants was negatively correlated with lipophilicity, and all surfactants were found to modulate the cellular response towards inducers by unidentified mechanisms. After experimental correction for effects on the cellular response, all surfactants except SDS moderately increased desorption of inducer from MPs. Results on the impact of lipophilicity agree with previously published thermodynamic models, indicating that appreciable pollutant desorption from MPs may only occur for substances with comparatively low lipophilicity, the accumulation of which on MPs is negligible in the environment. However, the role of surfactants should be considered further with respect to potential effects on sorption of pollutants to and from MPs.

A biosurfactant-producing Pseudomonas aeruginosa S5 isolated from coking wastewater and its application for bioremediation of polycyclic aromatic hydrocarbons

Although polycyclic aromatic hydrocarbons (PAHs) are considered as toxic and refractory pollutants, their biodegradation can be facilitated by biosurfactants. However, few studies have been performed to understand the potential isolation and application of biosurfactant-producing microorganism for promoting the in-situ removal of PAHs from wastewaters. In this work, a biosurfactant-producing strain S5 isolated from coking wastewater was identified as Pseudomonas aeruginosa. The biosurfactant produced by strain S5 was determined as glycolipid with a critical micelle concentration (CMC) of 96.5 mg/L, and reduced the surface tension from 72.2 to 29.6 mN/m. Addition indigenous P. aeruginosa S5 to coking wastewater effectively promoted the biodegradation of high weight molecular (HWM) PAHs (reduction from 9141.02 to 5117.16 µg/L in 15 days) in sludge phase. The results showed that the removal of PAHs in the sludge was enhanced by inoculating indigenous biosurfactant-producing microorganism in coking wastewater serving as an in-site remediation technology.

Extraction of PAHS from an aged creosote-polluted soil by cyclodextrins and rhamnolipids. Side effects on removal and availability of potentially toxic elements

This study evaluated the effect of several cyclodextrins (CDs) and a rhamnolipid (RL) on the removal of polycyclic aromatic hydrocarbons (PAHs) from a co-contaminated soil which had received historically creosote and inorganic wood preservatives for almost 100 years, and the effect of such extractions on the potentially toxic elements (PTEs). The influence on such processes of an electrolyte (0.01 M Ca(NO₃)₂) was also studied. Up to 15.4% of the ∑16 PAHs were extracted using RL in the absence of the electrolyte as washing solution, but decreases until reaching 0.60% in the presence of Ca²⁺ due to RL precipitation and partial inactivation. Only up to 2% of the ∑16 PAHs was extracted with CDs (4-ring PAHs in higher concentrations), but the electrolyte had no effect on extraction. In relation to PTEs, CDs proved to be inefficient for their extraction, and even RL in the presence of the background electrolyte. But in the absence of electrolyte PTEs extraction by RL increased. Apart from that, the availability of Ni, Cr, and As, those more associated to Fe and Al soil surfaces, increased after extraction with RLs in the presence of Ca²⁺ (about 100% for Cr and Ni and 200% for As). Under these conditions Fe and Al availability increased two- and ten-fold, respectively, indicating that Fe-Al soil surfaces were altered. Therefore, the ionic strength and the cations present in the soil solution of soils have to be considered when RLs are used as extractants for remediation purposes.

Influence of rhamnolipid biosurfactant and Brij-35 synthetic surfactant on 14C-Pyrene mineralization in soil

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous contaminants in soil and are considered priority pollutants due to their carcinogenicity. Bioremediation of PAH-contaminated soils is often limited by the low solubility and strong sorption of PAHs in soil. Synthetic surfactants and biosurfactants have been used to enhance the bioavailability of PAHs and to accelerate microbial degradation. However, few studies have compared synthetic and biosurfactants in their efficiency in promoting PAH biodegradation in either native or bioaugmented soils. In this study, we evaluated mineralization of ¹⁴C-pyrene in soils with or without the augmentation of Mycobacterium vanbaalenii PYR-1, and characterized the effect of Brij-35 (synthetic) and rhamnolipid biosurfactant at different amendment rates. Treatment of rhamnolipid biosurfactant at 140 or 1400 μg surfactant g-dry soil^-1 rates resulted in a significantly longer lag period in ¹⁴C-pyrene mineralization in both native and bioaugmented soils. In contrast, amendment of Brij-35 generally increased ¹⁴C-pyrene degradation, and the greatest enhancement occurred at 21.6 or 216 μg surfactant g-dry soil^-1 rates, which may be attributed to increased bioavailability. Brij-35 and rhamnolipid biosurfactant were found to be non-toxic to M. vanbaalenii PYR-1 at 10X CMC, thus indicating rhamnolipid biosurfactant likely served as a preferential carbon source to the degrading bacteria in place of ¹⁴C-pyrene, leading to delayed and inhibited ¹⁴C-pyrene degradation. Mineralization of ¹⁴C-pyrene by M. vanbaalenii PYR-1 was rapid in the unamended soils, and up to 60% of pyrene was mineralized to ¹⁴CO₂ after 10 d in the unamended or Brij-35 surfactant-amended soils. Findings of this study suggest that application of surfactants may not always lead to enhanced PAH biodegradation or removal. If the surfactant is preferentially used as an easier carbon substrate than PAHs for soil microorganisms, it may actually inhibit PAH biodegradation. Selection of surfactant types is therefore crucial for the effectiveness of surfactant-aided bioremediation of PAH-contaminated soils.

Surfactant-enhanced remediation of polycyclic aromatic hydrocarbons: A review

Polycyclic aromatic hydrocarbons (PAHs) are toxic, mutagenic and carcinogenic organic compounds that are widely present in the environment. The bioremediation of PAHs is an economical and environmentally friendly remediation technique, but it is limited because PAHs have low water solubility and fewer bioavailable properties. The solubility and bioavailability of PAHs can be increased by using surfactants to reduce surface tension and interfacial tension; this method is called surfactant-enhanced remediation (SER). The SER of PAHs is influenced by many factors such as the type and concentration of surfactants, PAH hydrophobicity, temperature, pH, salinity, dissolved organic matter and microbial community. Furthermore, as mixed micelles have a synergistic effect on PAH solubilisation, selecting the optimum ratio of mixed surfactants leads to effective PAH remediation. Although the use of surfactants inhibits microbial activities in some cases, this could be avoided by choosing an optimum combination of surfactants and a proper microbial community for the targeted PAH(s), resulting in up to 99.99% PAH removal. This article reviews the literature on SER of PAHs, including surfactant types, the synergistic effect of mixed micelles on PAH removal, the impact of surfactants on the PAH biodegradation process, factors affecting the SER process, and the mechanisms of surfactant-enhanced solubilisation of PAHs.

Removal of heavy metals with sequential sludge washing techniques using saponin: optimization conditions, kinetics, removal effectiveness, binding intensity, mobility and mechanism

Testing of sequential sludge washing in triplicate using typical biosurfactant saponin was conducted to remove heavy metals.

Current status in biotechnological production and applications of glycolipid biosurfactants

Biosurfactants are natural compounds with surface activity and emulsifying properties produced by several types of microorganisms and have been considered an interesting alternative to synthetic surfactants. Glycolipids are promising biosurfactants, due to low toxicity, biodegradability, and chemical stability in different conditions and also because they have many biological activities, allowing wide applications in different fields. In this review, we addressed general information about families of glycolipids, rhamnolipids, sophorolipids, mannosylerythritol lipids, and trehalose lipids, describing their chemical and surface characteristics, recent studies using alternative substrates, and new strategies to improve of production, beyond their specificities. We focus in providing recent developments and trends in biotechnological process and medical and industrial applications.

Rhamnolipid CMC prediction

Relationships between the purity, pH, hydrophobicity (logK_ow) of the carbon substrate, and the critical micelle concentration (CMC) of rhamnolipid type biosurfactants (RL) were investigated using a quantitative structure-property relationship (QSPR) approach and are presented here for the first time. Measured and literature CMC values of 97 RLs, representing biosurfactants at different stages of purification, were considered. An arbitrary scale for RLs purity was proposed and used in the modelling. A modified evolutionary algorithm was used to create clusters of equations to optimally describe the relationship between CMC and logK_ow, pH and purity (the optimal equation had an R² of 0.8366). It was found that hydrophobicity of the carbon substrate used for the biosynthesis of the RL had the most significant influence on the final CMC of the RL. Purity of the RLs was also found to have a significant impact, where generally the less pure the RL the higher the CMC. These results were in accordance with our experimental data. Therefore, our model equation may be used for controlling the biosynthesis of biosurfactants with properties targeted for specific applications.

Structural and physico-chemical characterization of a dirhamnolipid biosurfactant purified from Pseudomonas aeruginosa: application of crude biosurfactant in enhanced oil recovery

The present study describes the structural characterization and biotechnological application of a dirhamnolipid biosurfactant produced byPseudomonas aeruginosastrain NBTU-01 isolated from a petroleum oil-contaminated soil sample.