Initiation and inhibition of pitting corrosion on reinforcing steel under natural corrosion conditions

A carbon dot-based clay nanocomposite for efficient heavy metal removal

Carbon dots and their derivatives with fascinating photoluminescence properties have recently attracted tremendous scientific attention. This work describes the preparation of novel fluorescent bentonite clay (B), modified with carbon dot nanomaterials (CDs), and its usage as a lead removal platform. The CDs were prepared using a hydrothermal method from graphitic waste which served as the carbon source material. The as-obtained CDs were found to be fluorescent, being spherical in shape, positively charged, and smaller than 5 nm. Encouraged by their structure and photoluminescence features, they were used as surface modifiers to make fluorescent bentonite nanocomposites. Bentonite was used as a negatively charged model of aluminosilicate and reacted with the positively charged CDs. XRD, FTIR, XPS, and fluorescence analysis were used to characterize the prepared materials. The results indicate that the CDs intercalated inside the bentonite matrix were stable with excellent optical properties over time. They were finally used as an efficient hybrid platform for lead removal with a removal efficiency of 95% under light conditions, at room temperature, in an alkaline medium, and after only 10 min of reaction, compared to 70% under dark conditions. The pseudo-second-order kinetics and Langmuir isotherm models were better fitted to describe the adsorption process. The maximum adsorption capacity was equal to 400 mg g-1 toward Pb(ii) removal, at room temperature and pH = 8, under light conditions. To summarize, we have designed UV light stimuli responsive carbon dot-intercalated clay with high Pb(ii) adsorption capacity and long-term stability.

Application of Electrophoretic Deposition as an Advanced Technique of Inhibited Polymer Films Formation on Metals from Environmentally Safe Aqueous Solutions of Inhibited Formulations

The presented paper analyzes polymer films formed from aqueous solutions of organosilanes, corrosion inhibitors and their compositions. Methods of depositing inhibited films on metal samples, such as dipping and exposure of the sample in a modifying solution, as well as an alternative method, electrophoretic deposition (EPD), are discussed. Information is provided on the history of the EPD method, its essence, production process, areas of application of this technology, advantages over existing analogues, as well as its varieties. The article considers the promise of using the EPD method to form protective inhibited polymer films on metal surfaces from aqueous solutions of inhibitor formulations consisting of molecules of organosilanes and corrosion inhibitors.

Thin Protective Coatings on Metals Formed by Organic Corrosion Inhibitors in Neutral Media

Protection of metals in neutral media with pH 5.0–9.0 (in humid atmospheres and various aqueous solutions) can be achieved by formation of thin coatings (up to several tens of nm) on their surfaces due to adsorption and more complex chemical interactions of organic corrosion inhibitors (OCIs) with the metal to be protected. The review contains three sections. The first section deals with coatings formed in aqueous solutions, while the second one, with those formed in organic and water-organic solvents. Here we consider metal protection by coatings mainly formed by the best-known classes of OCI (carboxylates, organophosphates and phosphonates) and estimation of its efficiency. The third section discusses the peculiarities of protection of metals in the vapor-gas phase, i.e., by volatile OCIs, and a relatively new type of metal protection against atmospheric corrosion by the so-called chamber inhibitors. OCIs with relatively low volatility under normal conditions can be used as chamber OCIs. To obtain a protective coating on the surfaces of metal items, they are placed in a chamber inside which an increased concentration of vapors of a chamber OCI is maintained by increasing the temperature. This review mainly focuses on the protection of iron, steels, copper and zinc.

An efficient green ionic liquid for the corrosion inhibition of reinforcement steel in neutral and alkaline highly saline simulated concrete pore solutions

The effect of the green ionic liquid compound, Quaternium-32 (Q-32), on the corrosion inhibition performance of reinforcement steel, in a simulated concrete pore solution, was investigated at different temperatures and pH values, using electrochemical impedance spectroscopy (EIS). The inhibition efficiency was improved as the concentration of Q-32 and pH values were increased. However, it decreased as the temperature was raised. A Q-32 concentration of 20 µmol L^-1 exhibited a 94% inhibition efficiency at 20 °C. The adsorption isotherm was evaluated using EIS measurements, and it was found to obey the Langmuir isotherm. The surface topography was examined using an atomic force microscope and scanning electron microscope. The effect of the Q-32 concentration with the highest corrosion efficiency on the mechanical properties of the mortars was also explained by flexure and compression techniques.

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride

Aggressive operational conditions e.g. saline media and acidic gases, e.g., CO2 can increase the corrosion rate of reinforcing steel. Accordingly, the necessity to protect the steel under the above conditions without affecting the mechanical properties of the concrete is growing. Herein, the inhibition efficiency of a new corrosion inhibitor, behentrimonium chloride (BTC, C25H54ClN), is explored in a simulated-concrete pore solution (SCP) with 3.5 wt.% NaCl at different pH using electrochemical impedance spectroscopy (EIS) and polarization methods. Using only a 50 μmol L-1 of BTC, we are able to measure an inhibition efficiency of 91, 79, and 71% in SCP solution with 3.5% NaCl at pH of 12.5, 10 and 7, respectively without showing any effect on the mechanical properties on the cured mortars. Temkin isotherm is used to describe the physisorption of BTC inhibitor on the steel surface. Also, the adsorption and influence of the inhibitor on the metal surface are characterized using the scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. In conclusion, this new inhibitor shows high corrosion inhibition efficiencies under different aggressive conditions and can be used in concrete to reduce the corrosion rate of reinforcing steel without decreasing the mechanical properties of the concrete.

Highly efficient eco-friendly corrosion inhibitor for mild steel in 5 M HCl at elevated temperatures: experimental & molecular dynamics study

Laurhydrazide N′-propan-3-one was used as an eco-friendly inhibitor for the corrosion of mild steel in 5 M HCl at elevated temperatures. Various electrochemical techniques and surface characterization methods were utilized in this study. In addition, the kinetics and thermodynamic parameters were calculated and discussed. Furthermore, a geometry optimization of LHP was performed and the time-dependent density functional theory was utilized to calculate the electronic absorption spectra. Finally, frequency calculations were, also, performed on the optimized geometry.

AEO7 Surfactant as an Eco-Friendly Corrosion Inhibitor for Carbon Steel in HCl solution

The impact of AEO7 surfactant on the corrosion inhibition of carbon steel (C-steel) in 0.5 M HCl solution at temperatures between 20 °C and 50 °C was elucidated using weight loss and different electrochemical techniques. The kinetics and thermodynamic parameters of the corrosion and inhibition processes were reported. The corrosion inhibition efficiency (IE%) improved as the concentration of AEO7 increased. In addition, a synergistic effect was observed when a concentration of 1 × 10⁻³ mol L⁻¹ or higher of potassium iodide (KI) was added to 40 µmol L⁻¹ of the AEO7 inhibitor where the corrosion IE% increased from 87.4% to 99.2%. Also, it was found that the adsorption of AEO7 surfactant on C-steel surface followed the Freundlich isotherm. Furthermore, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements indicated that AEO7 was physically adsorbed on the steel surface. The surface topography was examined using an optical profilometer, an atomic force microscope (AFM), and a scanning electron-microscope (SEM) coupled with an energy dispersion X-ray (EDX) unit. Quantum chemical calculations based on the density functional theory were performed to understand the relationship between the corrosion IE% and the molecular structure of the AEO7 molecule.

Molecule adsorption and corrosion mechanism of steel under protection of inhibitor in a simulated concrete solution with 3.5% NaCl

Herein, the protective performance of a new triazole inhibitor for carbon steel was studied by electrochemical methods. Potentiodynamic polarization curves showed that the anti-corrosion efficiency improved with increasing concentrations of the inhibitor and the results show that it is 22 times corrosion resistance efficiency for inhibitor compared to bare aggressive solution. X-ray photoelectron spectroscopy showed that the film adsorbed well on the carbon steel surface. The scanning vibrating electrode technique demonstrated the corrosion process of carbon steel with and without the protection of inhibitor. Thus, a mechanism for the corrosion process was proposed and the behavior of carbon steel under the protection of the inhibitor was discussed.

Herein, the protective performance of a new triazole inhibitor for carbon steel was studied by electrochemical methods.