Dual functionalized, stable and water dispersible CdTe quantum dots: Facile, one-pot aqueous synthesis, optical tuning and energy transfer applications

Assessment of sealing efficacy, radiopacity, and surface topography of a bioinspired polymer for perforation repair

Background

Root perforation repair presents a significant challenge in dentistry due to inherent limitations of existing materials. This study explored the potential of a novel polydopamine-based composite as a root repair material by evaluating its sealing efficacy, radiopacity, and surface topography.

Methods

Confocal microscopy assessed sealing ability, comparing the polydopamine-based composite to the gold standard, mineral trioxide aggregate (MTA). Radiopacity was evaluated using the aluminium step wedge technique conforming to ISO standards. Surface roughness analysis utilized atomic force microscopy (AFM), while field emission scanning electron microscopy (FESEM) visualized morphology.

Results

The polydopamine-based composite exhibited significantly superior sealing efficacy compared to MTA (P < 0.001). Radiopacity reached 3 mm aluminium equivalent, exceeding minimum clinical requirements. AFM analysis revealed a smooth surface topography, and FESEM confirmed successful composite synthesis.

Conclusion

This study demonstrates promising properties of the polydopamine-based composite for root perforation repair, including superior sealing efficacy, clinically relevant radiopacity, and smooth surface topography. Further investigation is warranted to assess its clinical viability and potential translation to endodontic practice.

Physico-Chemical Properties of CdTe/Glutathione Quantum Dots Obtained by Microwave Irradiation for Use in Monoclonal Antibody and Biomarker Testing

In this report, we present the results on the physicochemical characterization of cadmium telluride quantum dots (QDs) stabilized with glutathione and prepared by optimizing the synthesis conditions. An excellent control of emissions and the composition of the nanocrystal surface for its potential application in monoclonal antibody and biomarker testing was achieved. Two samples (QDYellow, QDOrange, corresponding to their emission colors) were analyzed by dynamic light scattering (DLS), and their hydrodynamic sizes were 6.7 nm and 19.4 nm, respectively. Optical characterization by UV-vis absorbance spectroscopy showed excitonic peaks at 517 nm and 554 nm. Photoluminescence spectroscopy indicated that the samples have a maximum intensity emission at 570 and 606 nm, respectively, within the visible range from yellow to orange. Infrared spectroscopy showed vibrational modes corresponding to the functional groups OH-C-H, C-N, C=C, C-O, C-OH, and COOH, which allows for the formation of functionalized QDs for the manufacture of biomarkers. In addition, the hydrodynamic radius, zeta potential, and approximate molecular weight were determined by dynamic light scattering (DLS), electrophoretic light scattering (ELS), and static light scattering (SLS) techniques. Size dispersion and the structure of nanoparticles was obtained by Transmission Electron Microscopy (TEM) and by X-ray diffraction. In the same way, we calculated the concentration of Cd2+ ions expressed in mg/L by using the Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-OES). In addition to the characterization of the nanoparticles, the labeling of murine myeloid cells was carried out with both samples of quantum dots, where it was demonstrated that quantum dots can diffuse into these cells and connect mostly with the cell nucleus.

Systematic toxicity assessment of CdTe quantum dots in Drosophila melanogaster

The risk assessment of cadmium (Cd)-based quantum dots (QDs) used for biomedical nanotechnology applications has stern toxicity concerns. Despite cytotoxicity studies of cadmium telluride (CdTe) QDs, the systematic in vivo study focusing on its organismal effects are more relevant to public health. Therefore, the present study aims to investigate the effect of chemically synthesized 3-mercapto propionic acid-functionalized CdTe QDs on organisms' survival, development, reproduction, and behaviour using Drosophila melanogaster as a model. The sub-cellular impact on the larval gut was also evaluated. First/third instar larvae or the adult Drosophila were exposed orally to green fluorescence emitting CdTe QDs (0.2-100 μM), and organisms' longevity, emergence, reproductive performance, locomotion, and reactive oxygen species (ROS), and cell death were assessed. Uptake of semiconductor CdTe QDs was observed as green fluorescence in the gut. A significant decline in percentage survivability up to 80% was evident at high CdTe QDs concentrations (25 and 100 μM). The developmental toxicity was marked by delayed and reduced fly emergence after CdTe exposure. The teratogenic effect was evident with significant wing deformities at 25 and 100 μM concentrations. However, at the reproductive level, adult flies' fecundity, fertility, and hatchability were highly affected even at low concentrations (1 μM). Surprisingly, the climbing ability of Drosophila was unaffected at any of the used CdTe QDs concentrations. In addition to organismal toxicity, the ROS level and cell death were elevated in gut cells, confirming the sub-cellular toxicity of CdTe QDs. Furthermore, we observed a significant rescue in CdTe QDs-associated developmental, reproductive, and survival adversities when organisms were co-exposed with N-acetyl-cysteine (NAC, an antioxidant) and CdTe QDs. Overall, our findings indicate that the environmental release of aqueously dispersible CdTe QDs raises a long-lasting health concern on the development, reproduction, and survivability of an organism.

Intermediates formed during natural attenuation of C9 aromatics under simulated marine conditions: Identification, transformation pathway, and toxicity to microalgae

C9 aromatics - benzene hydrocarbon containing nine carbon atoms among - leakage accident has caused serious damage to the marine ecology near Quangang District, Fujian Province, China. The ecological restoration of the accident sea area is basically realized through natural attenuation. To determine whether the natural attenuation of C9 aromatics in the marine environment will generate highly toxic intermediates, and thus cause more serious harm to marine ecology, the intermediates of C9 aromatics (n-propylbenzene, isopropylbenzene, 2-ethyltoluene, 3-ethyltoluene, 4-ethyltoluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, and indene) in the process of natural attenuation were studied under the marine conditions simulated by a microcosm. The acute toxic effects of 12 intermediates with longer residual time on Phaeodactylum tricornutum were also ascertained. Twenty natural attenuation intermediates of C9 aromatics were identified. These products primarily include the derivatives of phenols, aromatic alcohols, aromatic aldehydes, aromatic ketones, and aromatic acids, as well as an aromatic lactone compound. No intermediates of 1,3,5-trimethylbenzene and indene during the attenuation process were determined. The indirect photooxidation initiated by hydroxyl radical might play an essential role in the formation of intermediates of C9 aromatic. Based on the 96-h EC₅₀ values for P. tricornutum, the toxicity of the 12 intermediates, in descending order, was: 4-ethylphenol, 2-methylacetophenone, 2,3-dimethylbenzyl alcohol, 4-methylacetophenone, 3-methylacetophenone, 1-phenyl-1-propanol, 1-(2-methylphenyl) ethanol, 2-phenyl-2-propanol, 3,4-dimethylbenzoic acid, 2,4-dimethylbenzoic acid, 2,5-dimethylbenzoic acid, then 4-tolylacetic acid. The 96-h EC₅₀ values of the intermediates of C9 aromatics to P. tricornutum ranged from 8.4 to 199.1 mg/L, which were lower than that of their corresponding parent compound. The findings provided essential fundamental insights for the assessment of marine environmental risk of C9 aromatics leakage accidents, and subsequent emergency disposal countermeasures.

Synthesis of Group II-VI Semiconductor Nanocrystals via Phosphine Free Method and Their Application in Solution Processed Photovoltaic Devices

Solution-processed CdTe semiconductor nanocrystals (NCs) have exhibited astonishing potential in fabricating low-cost, low materials consumption and highly efficient photovoltaic devices. However, most of the conventional CdTe NCs reported are synthesized through high temperature microemulsion method with high toxic trioctylphosphine tellurite (TOP-Te) or tributylphosphine tellurite (TBP-Te) as tellurium precursor. These hazardous substances used in the fabrication process of CdTe NCs are drawing them back from further application. Herein, we report a phosphine-free method for synthesizing group II-VI semiconductor NCs with alkyl amine and alkyl acid as ligands. Based on various characterizations like UV-vis absorption (UV), transmission electron microscope (TEM), and X-ray diffraction (XRD), among others, the properties of the as-synthesized CdS, CdSe, and CdTe NCs are determined. High-quality semiconductor NCs with easily controlled size and morphology could be fabricated through this phosphine-free method. To further investigate its potential to industrial application, NCs solar cells with device configuration of ITO/ZnO/CdSe/CdTe/Au and ITO/ZnO/CdS/CdTe/Au are fabricated based on NCs synthesized by this method. By optimizing the device fabrication conditions, the champion device exhibited power conversion efficiency (PCE) of 2.28%. This research paves the way for industrial production of low-cost and environmentally friendly NCs photovoltaic devices.

Multi-mode fluorescence sensing detection based on one core-shell structure quantum dots via different types of mechanisms

Multi-target sensing completed with single chemosensor is cost-effective and pretty attractive for the analysis of multiple analytes in single sample. CdTe/CdS QDs show high fluorescence quantum yield as a probe for the sensing purpose, but only single target is often detected. Here we proposed that three kinds of different response mechanisms were realized using CdTe/CdS QDs with the simultaneous sensing of Fe³⁺, Cr₂O₇^2-, and IO₃^- as model. The specific binding affinity was used to detect Fe³⁺ with the photo-induced electron transfer (PET) mechanism. CdTe/CdS QDs showed intensive fluorescent response to Cr₂O₇^2- owing to the inner filter effect (IFE). IO₃^- is an oxidant and reacts to surface functional groups of CdTe/CdS QDs with oxidation quenching (OQ) mechanism for the selective detection of IO₃^-. The three targets recorded with the three mechanisms were obviously clustered even they were tested at different concentrations. Thus, the targets could be differentiated with each other through their different responses of PET, IFE, and OQ. The linear ranges for the selective detection of Fe³⁺, Cr₂O₇^2-, and IO₃^- were 5.0-100.0, 20.0-140.0 and 1.0-80.0 μM, with the limits of detection as low as 4.1, 9.7, and 0.9 μM, respectively. The proposed methods were satisfactorily applied to accurately detect Fe³⁺, Cr₂O₇^2-, and IO₃^- in real samples and it was further detected iodate and the total amount of iodine in table salt samples. The proposed multi-target detection strategy with the single fluorescence single from single QDs will stimulate the application of the other matrix with abundant response with enhance sensing efficiency.

The pathways by which the marine diatom Thalassiosira sp. OUC2 biodegrades p-xylene, combined with a mechanistic analysis at the proteomic level

A marine diatom, Thalassiosira sp. OUC2, was isolated from natural seawater collected from Daya Bay, China. This diatom degraded 1.25-40 mg L^-1p-xylene within five days, at a removal efficiency exceeding 98%. Gas chromatography-mass spectrometer (GC-MS) analysis indicated that p-xylene was converted into 4-methylbenzyl alcohol, p-toluic acid, and p-cresol in the presence of strain OUC2. Meanwhile, proteomic analysis showed that, after exposure to p-xylene, several algal enzymes were significantly upregulated: including monooxygenase, alcohol dehydrogenase, benzaldehyde dehydrogenase, benzoate 1,2-dioxygenase, and catechol 2,3-dioxygenase. Moreover, ecotoxicological tests suggested that the intermediate metabolites were less toxic than the parent compound (p-xylene). Thalassiosira sp. OUC2 may thus be suitable for the remediation of p-xylene-contaminated marine environments.

Toxicological Assessment of Intermediates in Natural Attenuation of p-Xylene to Marine Microalgae

The toxic effects of p-xylene, 4-methylbenzyl alcohol, p-methyl benzaldehyde, and p-toluic acid on two marine microalgae (Phaeodactylum tricornutum Bohlin, and Skeletonema costatum) were investigated. p-Xylene was the most toxic to Pha. tricornutum with a 96 h EC₅₀ value of 6.76 mg L^-1. Based on the 96 h EC₅₀ values for two microalgae, the toxicity of the four chemicals, in descending order, was: p-xylene, p-methyl benzaldehyde, 4-methylbenzyl alcohol, then p-toluic acid. The results showed that the toxicity of the transformed products of p-xylene was lower than that of p-xylene.