Loop-mediated isothermal amplification assay targeting the omp25 gene for rapid detection of Brucella spp

Development of a novel visual isothermal amplification assay for rapid detection of Brucella spp

Brucellosis is an economically important livestock disease worldwide besides having a noteworthy impact on human health. In this study, a rapid, simple, and ultra-sensitive nuclei-acid diagnostic technique was developed for the detection of brucellosis harnessing saltatory rolling circle amplification (SRCA). The diagnostic method was developed using World Organization for Animal Health (WOAH) approved primers targeting the bcsp31 gene of the Brucella genome. The assay can be accomplished within 90 min at a temperature of 65 °C without the requirement of sophisticated instrumentation. The result interpretation can be done with the naked eye with the aid of SYBR green dye. The developed technique displayed 100% specificity by amplifying only 10 reference and field strains of Brucella spp. and there was no cross-reactivity with the other tested pathogens. The lower limit of detections of SRCA and end-point PCR assays were 9.7 fg/μL (2.7 genome copies of Brucella) and 970 fg/μL, respectively. Thus, the developed SRCA assay was found to be 100× more sensitive than the end-point PCR assay. To the best of our knowledge, our study is the first one to develop an SRCA-based assay for the detection of brucellosis and it can be a diagnostic tool for resource-constrained laboratories and veterinary hospitals.

Accuracy of molecular diagnostic methods for the detection of bovine brucellosis: A systematic review and meta-analysis

Background and Aim:

Bovine brucellosis is a disease of global socio-economic importance caused by Brucella abortus. Diagnosis is mainly based on bacterial culture and serology. However, these methods often lack sensitivity and specificity. A range of molecular diagnostic methods has been developed to address these challenges. Therefore, this study aims to investigate the diagnostic accuracy of molecular tools, in comparison to gold standard bacterial isolation and serological assays for the diagnosis of bovine brucellosis.

Materials and Methods:

The systematic review and meta-analysis were conducted based on analyses of peer-reviewed journal articles published between January 1, 1990, and June 6, 2020, in the PubMed, Science Direct, Scopus, and Springer Link databases. Data were extracted from studies reporting the use of molecular diagnostic methods for the detection of B. abortus infections in animals according to Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. The quality of included journal articles was assessed using the quality assessment of diagnostic-accuracy studies assessment tool and meta-analysis was carried out using Review Manager.

Results:

From a total of 177 studies, only 26 articles met the inclusion criteria based on PRISMA guidelines. Data from 35 complete studies were included in the meta-analysis and used to construct 2 × 2 contingency tables. Improved diagnostic performance was observed when tissue (sensitivity 92.7% [95% confidence interval (CI) 82.0–98.0%]) and serum samples (sensitivity 91.3% [95% CI 86.0–95.0%]) were used, while the BruAb2_0168 locus was the gene of preference for optimal assay performance (sensitivity 92.3% [95% CI 87.0–96.0%] and specificity 99.3% [95% CI 98.0–100.0%]). Loop-mediated isothermal amplification (LAMP) had a higher diagnostic accuracy than polymerase chain reaction (PCR) and real-time quantitative PCR with sensitivity of 92.0% (95% CI 78.0–98.0%) and specificity of 100.0% (95% CI 97.0–100.0%).

Conclusion:

The findings of this study assign superior diagnostic performance in the detection of B. abortus to LAMP. However, due to limitations associated with decreased specificity and a limited number of published articles on LAMP, the alternative use of PCR-based assays including those reported in literature is recommended while the use of LAMP for the detection of bovine brucellosis gains traction and should be evaluated more comprehensively in future.

Gold Nanoparticles Prepared with Cyclodextrin Applied to Rapid Vertical Flow Technology for the Detection of Brucellosis

Currently, brucellosis seriously threatens the health of humans and animals and hinders the development of animal husbandry. However, the diagnostic methods for brucellosis have some disadvantages, such as low sensitivity, long detection time, professional operation, and high cost. This study aims to establish a convenient, fast, effective, and inexpensive detection method for brucellosis. Gold nanoparticles with β-cyclodextrin as a reducing agent were prepared and optimized, applied to rapid vertical flow technology (RVFT), and used to establish a kit for the detection of brucellosis. In this study, gold nanoparticles prepared from β-cyclodextrin were applied to RVFT for the first time, and on this basis, silver staining amplification technology was introduced, which further improved the sensitivity and reduced the detection limit of this method. Standard Brucella-Positive Serum (containing Brucella antibody at 4000 IU/mL) could be detected in this system even for a dilution factor of 1 × 10⁻³. The detection limit was 4 IU/mL. RVFT is simple to operate, has a short reaction time, and is 5–6 min visible to the naked eye, without any equipment.

Rapid detection of Actinobacillus pleuropneumoniae targeting the apxIVA gene for diagnosis of contagious porcine pleuropneumonia in pigs by Polymerase Spiral Reaction

Actinobacillus pleuropneumoniae is the primary etiological agent of contagious porcine pleuropneumonia associated with serious economic impact on pig husbandry worldwide. Diagnosis of the disease by existing techniques including isolation and identification bacteria followed by serotyping, serological techniques, conventional PCR, real-time PCR and LAMP assays are cumbersome, time consuming, costly and not suitable for rapid field application. A novel isothermal polymerase chain reaction (PSR) technique is standardized for all the reagents, incubation time and incubation temperature against A. pleuropneumoniae. Sensitivity of the assay was determined against various dilutions of purified DNA and total bacterial count. Specificity of the assay was determined against 11 closely related bacterial isolates. The relative sensitivity and specificity was compared with bacterial isolation, conventional PCR and real-time PCR assays. The PSR assay for specific detection was standardized at 64^o C for 30 minutes incubation in a water bath. The result was visible by the naked eye after centrifugation of the reaction mixture or after incorporation of SYBR Green dye as yellow-green fluorescence. The technique was found to be 100% specific and equally sensitive with real-time PCR and 10 times more sensitive than conventional PCR. The PSR assay could be applicable in detection of the organisms in porcine nasal swabs spiked with A. pleuropneumoniae. This is the first ever report on development of PSR for specific detection of A. pleuropneumoniae and can be applied for early diagnosis at field level.

Point-of-Care Chlamydia trachomatis Detection Using Loop-Mediated Isothermal Amplification and Hydroxynaphthol Blue

Loop-mediated isothermal amplification (LAMP) is a new nucleic acid amplification technique that provides high sensitivity and specificity compatible to conventional polymerase chain reaction (PCR) and simplicity, without the requirement of an expensive thermal cycler. Additionally, LAMP coupled hydroxynaphthol blue (HNB) allowed for visual color detection by the naked eye. Here we describe the methodology of Chlamydia trachomatis detection of vaginal swab from crude DNA lysis to LAMP-HNB reaction. The result can be read by the naked eye through color change from violet (negative) to sky blue (positive). The result can be confirmed by UV spectra and agarose gel electrophoresis. This assay uses all nonhazardous chemical reagents and is hence safe to the users, and requires little specialist training or knowledge.

Rapid visual isothermal nucleic acid-based detection assay of Brucella species by polymerase spiral reaction

AIM

The aim of this study was to develop polymerase spiral reaction (PSR) for rapid, sensitive and specific detection of Brucella sp.

METHODS AND RESULTS

Polymerase spiral reaction assay was developed using specifically designed primers targeting the conserved multicopy IS711 gene of Brucella sp. The assay could be performed within 60 min at an isothermal temperature of 64°C. The lower limit of detection of PSR was 11·8 fg and conventional PCR was 1·18 pg of Brucella abortus genomic DNA. Thus, PSR was found to be 100-fold more sensitive than conventional PCR and was comparable to real-time PCR. The specificity of PSR was tested with other non-Brucella bacteria and also with some bacterial and viral pathogens causing abortions. The assay was found to be specific as it did not detect any putative pathogens other than Brucella sp. Fifty-six clinical samples suspected for brucellosis (aborted fetal stomach content) were screened with PSR to validate the applicability of the test to detect Brucella DNA. The same samples were also screened with conventional PCR and real-time PCR. Of 56 samples, 25 samples were found to be positive with both PSR as well as real-time PCR, whereas only 20 samples were found positive with conventional PCR.

CONCLUSIONS

The results of this study indicated that the PSR assay is a simple, rapid, sensitive and specific method for the detection of Brucella sp. that may improve diagnostic potential in clinical laboratories or can be used at diagnostic laboratories with minimal infrastructure.

SIGNIFICANCE AND IMPACT OF THE STUDY

The PSR assay, because of its simplicity and low cost, can be preferred to other molecular methods in the diagnosis of infectious diseases.

A novel loop-mediated isothermal amplification-based test for detecting Neospora caninum DNA

BACKGROUND

Neospora caninum is a cyst-forming, coccidian parasite which is known to cause neurological disorders in dogs and abortion and neonatal mortality in cows and other livestock. This study reports the development of a loop-mediated isothermal amplification (LAMP) assay based on the Neospora caninum Nc-5 gene and compares its efficacy for detecting DNA to that of a semi-nested PCR test.

RESULTS

Six primers were designed based on the Nc-5 repeat region of N. caninum. Specific LAMP primers led to successful amplification of N. caninum DNA at 63 °C in 30 min. The LAMP assay was highly specific (i.e. it did not reveal cross-reactivity with other parasite species) and had a low N. caninum plasmid DNA limit of detection (1 fg), which is ten times higher than that for the semi-nested PCR. LAMP applicability was evaluated using a set of naturally-infected samples (59 from canine faeces and five from bovine abortions). Thirty-nine percent (25/64) of the naturally-infected samples were positive for N. caninum DNA by LAMP and 36% (23/64) by semi-nested PCR. However, the LAMP assay is much faster to perform than semi-nested PCR and provides results in 30 min.

CONCLUSION

The optimized reaction conditions described in this study resulted in a sensitive, specific and rapid technique for detecting N. caninum DNA. Considering the advantages of LAMP for detecting N. caninum DNA, further assays aimed at testing its usefulness on a wider range of field samples are recommended.

Evaluation of the stability of lyophilized loop-mediated isothermal amplification reagents for the detection of Coxiella burnetii

Coxiella burnetii, the causative pathogen for Q fever, is an obligate intracellular bacterium and designated as a biosafety level 3 agent. Detection and quantification of the bacteria with conventional culturing methods is time-consuming and poses significant health risks. Polymerase chain reaction (PCR)-based assays have been developed for detecting C. burnetii and could provide rapid diagnosis. However, they require specialized equipment, including a cold chain for PCR reagents that maintains their stability during storage and transport. These requirements limit the advantage of PCR-based methods, especially in resource-limited areas.

Previously, we had developed a lyophilized loop-mediated isothermal amplification (LAMP) assay to detect the presence of C. burnetii. To simplify and improve this assay, the reagents for the LAMP assay and the detecting reagent, SYBR green, were lyophilized together. The stability of the lyophilized reagents was evaluated by measuring changes in detection limit for plasmid DNA encoding a C. burnetii gene upon storage at 4 °C, 25 °C, or 37 °C. Our data indicate that the lyophilized reagents remain stable for 24 months when stored at 4 °C, 28 days at 25 °C, and 2 days at 37 °C. This improved LAMP assay can be easily performed in a simple water bath or heating block. The stability at ambient temperature, the simplicity of assay procedure, and the availability of low cost equipment make this method ideal for use in resource-limited settings where Q fever is endemic.

Comparison of a new visual isothermal nucleic acid amplification test with PCR and skin snip analysis for diagnosis of onchocerciasis in humans

Accurate, simple and affordable diagnostics are needed to detect Onchocerca volvulus infection in humans. A newly developed colorimetric loop-mediated isothermal amplification (LAMP) assay was compared to PCR and skin snip analysis for diagnosis of onchocerciasis. The robustness and simplicity of the assay indicates that it may be a useful field tool for surveillance in endemic countries.

Visual Detection of Brucella spp. in Spiked Bovine Semen Using Loop-Mediated Isothermal Amplification (LAMP) Assay

Several pathogens including Brucella spp. are shed in semen of infected bulls and can be transmitted to cows through contaminated semen during artificial insemination. The present study reports omp2a and bcsp31 gene based loop-mediated isothermal amplification (LAMP) assays for detection of Brucella genomic DNA in semen from infected bulls. The positive results could be interpreted visually by change in colour of reaction mixture containing hydroxyl naphthol blue (HNB) dye from violet to sky blue. LAMP assays based on omp2a and bcsp31 could detect as little as 10 and 100 fg of B. abortus S19 genomic DNA, respectively. Sensitivity of omp2a and bcsp31 LAMP assays for direct detection of organisms in bovine semen was 2.28 × 10(1) CFU and 2.28 × 10(2) CFU of B. abortus S19 in spiked bovine semen, respectively. The omp2a LAMP assay was found equally sensitive to TaqMan probe based real-time PCR and 100 times more sensitive than conventional PCR in identifying Brucella in spiked semen. The diagnostic applicability of the omp2a LAMP assay was evaluated with seventy-nine bovine semen samples and results were re-evaluated through TaqMan probe based real-time PCR and conventional PCR. Taken together, the omp2a LAMP assay is easy to perform, rapid and sensitive in diagnosis of Brucella spp. in bovine semen.

LAMP technology: Rapid identification of Brucella and Mycobacterium avium subsp. paratuberculosis

In this study, we developed new sets of primers to detect Brucella spp. and M. avium subsp. paratuberculosis (MAP) through isothermal amplification. We selected a previously well-characterized target gene, bscp31, specific for Brucella spp. and IS900 for MAP. The limits of detection using the loop-mediated isothermal amplification (LAMP) protocols described herein were similar to those of conventional PCR targeting the same sequences. Hydroxynaphtol blue and SYBR Green^TM allowed direct naked-eye detection with identical sensitivity as agarose gel electrophoresis. We included the LAMP-based protocol in a rapid identification scheme of the respective pathogens, and all tested isolates were correctly identified within 2 to 3 h. In addition, both protocols were suitable for specifically identifying the respective pathogens; in the case of Brucella, it also allowed the identification of all the biovars tested. We conclude that LAMP is a suitable rapid molecular typing tool that could help to shorten the time required to identify insidious bacteria in low-complexity laboratories, mainly in developing countries.

Rapid and specific identification of Brucella abortus using the loop-mediated isothermal amplification (LAMP) assay

A rapid and accurate diagnosis of brucellosis is required to reduce and prevent the spread of disease among animals and the risk of transfer to humans. In this study, a Brucella abortus-specific (Ba) LAMP assay was developed, that had six primers designed from the BruAb2_0168 region of chromosome I. The specificity of this LAMP assay was confirmed with Brucella reference strains, B. abortus vaccine strains, B. abortus isolates and phylogenetically or serologically related strains. The detection limit of target DNA was up to 20 fg/μl within 60 min. The sensitivity of the new LAMP assay was equal to or slightly higher than other PCR based assays. Moreover, this Ba-LAMP assay could specifically amplify all B. abortus biovars compared to previous PCR assays. To our knowledge, this is the first report of specific detection of B. abortus using a LAMP assay. The Ba-LAMP assay can offer a rapid, sensitive and accurate diagnosis of bovine brucellosis in the field.

Development of loop-mediated isothermal amplification test for the diagnosis of contagious agalactia in goats

Contagious agalactia is a highly infectious disease affecting sheep and goats, mainly caused by Mycoplasma agalactiae. Although various tests are available for diagnosis of contagious agalactia, none of them is credited with the capacity to provide rapid and cost-effective diagnosis. This article reports the development of loop-mediated isothermal amplification (LAMP) test targeting the p40 gene of M. agalactiae, for the diagnosis of classical contagious agalactia. Optimum amplification was obtained at 58 °C in 70 min. The developed test was found to be 100-fold more sensitive than PCR and detected up to 20-fg level of DNA. The test was also superior to conventional PCR in detecting from artificially contaminated milk, i.e. 10(4)-fold more sensitive. The developed LAMP test could detect up to 10 cfu/ml of artificially contaminated milk, indicating its potential for being developed as a field test for rapid and sensitive diagnosis.

Loop-mediated isothermal amplification (LAMP) test for specific and rapid detection of Brucella abortus in cattle

BACKGROUND

Brucella abortus, the major causative agent of abortion in cattle and a zoonotic pathogen, needs to be diagnosed at an early stage. Loop-mediated isothermal amplification (LAMP) test is easy to perform and also promising to be adapted at field level.

OBJECTIVE

To develop a LAMP assay for specific and rapid detection of B. abortus from clinical samples of cattle.

METHODS

LAMP primers were designed targeting BruAb2_0168 region using specific software tool and LAMP was optimized. The developed LAMP was tested for its specificity with 3 Brucella spp. and 11 other non-Brucella spp. Sensitivity of the developed LAMP was also carried out with known quantity of DNA. Cattle whole blood samples and aborted fetal stomach contents were collected and used for testing with developed LAMP assay and results were compared with polymerase chain reaction (PCR).

RESULTS

The developed LAMP assay works at 61 °C for 60 min and the detection limit was observed to be 100-fold more than the conventional PCR that is commonly used for diagnosis of B. abortus. Clinical sensitivity and specificity of the developed LAMP assay was 100% when compared with Rose Bengal plate test and standard tube agglutination test. SYB® green dye I was used to visualize the result with naked eye.

CONCLUSION

The novelty of the developed LAMP assay for specifically detecting B. abortus infection in cattle along with its inherent rapidness and high sensitivity can be employed for detecting this economically important pathogen of cattle at field level as well be exploited for screening of human infections.

New closed tube loop mediated isothermal amplification assay for prevention of product cross-contamination

Loop mediated isothermal amplification (LAMP) assay, a promising diagnostic test, has been developed for detection of different pathogens of human as well as animals. Various positive points support its use as a field level test but the major problem is product cross contamination leading to false positive results. Different methods were adopted by various researchers to control this false positive amplification due to cross contamination but all have their own advantages and disadvantages. A new closed tube LAMP assay based on agar dye capsule was developed in the present study and this technique has some advantages over the other closed tube technique.•

Agar at the concentration of 1.5% was used to sandwich SYBR green dye I with the aid of intradermal syringe. This agar dye capsule was placed over the LAMP reaction mixture before it was amplified.

•

To eliminate the hazardous nature of Ultra Violet (UV) light during result visualization of LAMP products, the present study demonstrates the use of Light Emitting Diode (LED) lights for result visualization.

•

LAMP was carried out for Brucella species detection using this modified techniques yielding good results without any cross contamination and LED showed similar fluorescence compared to UV.

Polymerase chain reaction-based assays for the diagnosis of human brucellosis

Polymerase chain reaction (PCR) is an in vitro technique for the nucleic acid amplification, which is commonly used to diagnose infectious diseases. The use of PCR for pathogens detection, genotyping and quantification has some advantages, such as high sensitivity, high specificity, reproducibility and technical ease. Brucellosis is a common zoonosis caused by Brucella spp., which still remains as a major health problem in many developing countries around the world. The direct culture and immunohistochemistry can be used for detecting infection with Brucella spp. However, PCR has the potential to address limitations of these methods. PCR are now one of the most useful assays for the diagnosis in human brucellosis. The aim of this review was to summarize the main PCR techniques and their applications for diagnosis and follow-up of patients with brucellosis. Moreover, advantages or limitation of the different PCR methods as well as the evaluation of PCR results for treatment and follow-up of human brucellosis were also discussed.

Developing a real-time quantitative loop-mediated isothermal amplification assay as a rapid and accurate method for detection of Brucellosis

AIM

The aim of this study was designing a LAMP method for the rapid detection of Brucella and development of a sensitive quantitative-LAMP (Q-LAMP) assay for quantification of brucellosis.

METHODS AND RESULTS

In this study for the LAMP detection of the causative agent of brucellosis, we used specifically designed primers to target the omp25 conserved gene of Brucella spp. The sensitivity of the LAMP method was evaluated by preparing serial tenfold dilution of omp25 gene containing plasmid followed by performing the LAMP reaction. To improve the assay as a quantitative test, LAMP products in the serial dilution were evaluated by Loopamp real-time turbidimeter system and then standard curve was generated by plotting time threshold values against log of copy number. The assay specificity was evaluated using Brucella genomic DNA and a panel containing genomes of 11 gram-positive and gram-negative organisms. The LAMP assay was highly specific and no amplification products were observed from the non-Brucella organisms. The test sensitivity for visual detection of turbidity or fluorescent colour change and also agarose gel electrophoresis was 560 ng and 5·6 ng, respectively. The lower limit of detection was 17 copies of the gene that could be detected in 50 min.

CONCLUSIONS

The results of this study indicated that the LAMP assay is a simple, rapid, sensitive and specific technique for detection of Brucella spp. that may improve diagnostic potential in clinical laboratories.

SIGNIFICANCE AND IMPACT OF THE STUDY

The LAMP assay because of the simplicity and low cost can be preferred to other molecular methods in the diagnosis of infectious diseases.

Isothermal nucleic acid amplification technologies for point-of-care diagnostics: a critical review

Nucleic Acid Testing (NAT) promises rapid, sensitive and specific diagnosis of infectious, inherited and genetic disease. The next generation of diagnostic devices will interrogate the genetic determinants of such conditions at the point-of-care, affording clinicians prompt reliable diagnosis from which to guide more effective treatment. The complex biochemical nature of clinical samples, the low abundance of nucleic acid targets in the majority of clinical samples and existing biosensor technology indicate that some form of nucleic acid amplification will be required to obtain clinically relevant sensitivities from the small samples used in point-of-care testing (POCT). This publication provides an overview and thorough review of existing technologies for nucleic acid amplification. The different methods are compared and their suitability for POCT adaptation are discussed. Current commercial products employing isothermal amplification strategies are also investigated. In conclusion we identify the factors impeding the integration of the methods discussed in fully automated, sample-to-answer POCT devices.