Heritability and genetic correlations of carcass and meat quality traits in Piemontese young bulls

Fetal Programming and Its Effects on Meat Quality of Nellore Bulls

This work aimed to evaluate the effects of prenatal nutritional stimulation at different pregnancy stages on carcass traits and meat quality in bovine progeny. For this purpose, 63 Nellore bulls, born from cows submitted to three nutritional plans, were used: not programmed (NP), which did not receive protein supplementation; partially programmed (PP), which had protein-energy supplementation (0.3% of mean body weight of each batch) only in the final third of pregnancy; and full programming (FP), which received supplementation (0.3% of mean body weight of each batch) throughout pregnancy. The averages of parameters were submitted to the ANOVA, and the supplementation periods, which were different when p value < 0.05, were compared. Carcass weights and rib eye area (REA) did not differ between treatments (p > 0.05), but subcutaneous fat thickness (SFT) showed a tendency (p = 0.08) between groups. For lipids and marbling, no differences were found (p > 0.05). In the analyses of maturation time and shelf life, no difference was observed between treatments. However, there was a tendency between treatments at 14 days of maturation time for cooking loss (CL) (p = 0.08). Treatments did not affect shear force in the progenies (p > 0.05). Fetal programming had no effect on the meat quality of Nellore bulls.

Understanding the phenotypic and genetic background of the lactose content in Sarda dairy sheep

Lactose, the principal carbohydrate found in milk, plays an important role in the physiological processes of milk production because it is related to milk volume, and it is responsible for the osmotic equilibrium between blood and milk in the mammary gland. In this study, factors affecting lactose content (LC) in sheep milk are investigated. For this purpose, 2,358 test-day records were sampled from 509 ewes (3-7 records per animal). The LC and other main milk traits were analyzed using a mixed linear model that included days in milk (DIM) class, parity, lambing month, and type of lambing as fixed effects and animal, permanent environment, and flock test day as random effects. The pedigree-based approach was used to estimate the heritability and repeatability of LC. Moreover, the genomic background of LC was investigated through a GWAS. The LC was affected by all tested factors (i.e., DIM class, parity, lambing month, and type of lambing). Low heritability (0.10 ± 0.05) and moderate repeatability (0.42 ± 0.02) were estimated for LC. High negative genetic correlations were estimated between LC and NaCl (-0.99 ± 0.01) and between LC and somatic cell count (-0.94 ± 0.05). Only 2 markers passed the chromosome-wide Bonferroni threshold. Results of the present study, although obtained on a relatively small sample, suggest the possibility to include LC in the breeding programs, particularly because of its strong relationship with NaCl and somatic cell count.

Whole Genome Sequencing Analysis to Identify Candidate Genes Associated With the rib eye Muscle Area in Hu Sheep

In sheep meat production, the rib eye area is an important index to evaluate carcass traits. However, conventional breeding programs have led to slow genetic progression in rib eye muscle area. Operationalizing molecular marker assisted breeding is an optimized breeding method that might improve this situation. Therefore, the present study used whole genome sequencing data to excavate candidate genes associated with the rib eye muscle. Male Hu lambs (n = 776) with pedigrees and 274 lambs with no pedigree were included. The genetic parameters of the rib eye area were estimated using a mixed linear mixed model. The rib eye area showed medium heritability (0.32 ± 0.13). Whole-genome sequencing of 40 large rib eye sheep [17.97 ± 1.14, (cm²)] and 40 small rib eye sheep [7.89 ± 0.79, (cm²)] was performed. Case-control genome-wide association studies and the fixation index identified candidate rib eye-associated genes. Seven single nucleotide polymorphisms (SNPs) in six genes (ALS2, ST6GAL2, LOC105611989, PLXNA4, DPP6, and COL12A1) were identified as candidates. The study population was expanded to 1050 lambs to perform KASPar genotyping on five SNPs, which demonstrated that SNPs in LOC105611989, DPP6, and COL12A1 correlated significantly with the rib eye area, which could be used as genetic markers for molecular breeding of the rib eye area. The results provided genetic parameters estimated on the rib eye area and information for breeding based on carcass traits in Hu sheep.

Long-term effects of early maternal undernutrition on the growth, physiological profiles, carcass and meat quality of male beef offspring

The effects of maternal undernutrition in early gestation on growth, metabolic and endocrine profiles, carcass and meat quality of male offspring in cattle were assessed. Twenty-one Parda de Montaña and 14 Pirenaica cows received a CONTROL (100% nutrition requirements) or a SUBNUT (65%) diet from day 0 to 82 of gestation and thereafter were fed to requirements until calf weaning at 4 months of age. The performance and physiological profiles of male offspring during an 8-month fattening period were analyzed. Bulls were slaughtered at 12 months of age, and their carcasses and meat color, tenderness and intramuscular fatty acid profile were evaluated. Maternal undernutrition increased plasma NEFAs and impaired the growth of Pirenaica bulls, resulting in lower weights at slaughter and fatter carcasses with impaired meat tenderness. Irrespective of the breed, maternal undernutrition affected meat color and increased the meat content of some healthy fatty acids. In summary, early maternal undernutrition affected the fetal programming of beef male offspring with persistent consequences at slaughter.

Phenotypic and genetic variation of ultraviolet-visible-infrared spectral wavelengths of bovine meat

Spectroscopic predictions can be used for the genetic improvement of meat quality traits in cattle. No information is however available on the genetics of meat absorbance spectra. This research investigated the phenotypic variation and the heritability of meat absorbance spectra at individual wavelengths in the ultraviolet-visible and near-infrared region (UV-Vis-NIR) obtained with portable spectrometers. Five spectra per instrument were taken on the ribeye surface of 1185 Piemontese young bulls from 93 farms (13,182 Herd-Book pedigree relatives). Linear animal model analyses of 1481 single-wavelengths from UV-Vis-NIRS and 125 from Micro-NIRS were carried out separately. In the overlapping regions, the proportions of phenotypic variance explained by batch/date of slaughter (14 ± 6% and 17 ± 7%,), rearing farm (6 ± 2% and 5 ± 3%), and the residual variances (72 ± 10% and 72 ± 5%) were similar for the UV-Vis-NIRS and Micro-NIRS, but additive genetics (7 ± 2% and 4 ± 2%) and heritability (8.3 ± 2.3% vs 5.1 ± 0.6%) were greater with the Micro-NIRS. Heritability was much greater for the visible fraction (25.2 ± 11.4%), especially the violet, blue and green colors, than for the NIR fraction (5.0 ± 8.0%). These results allow a better understanding of the possibility of using the absorbance of visible and infrared wavelengths correlated with meat quality traits for the genetic improvement in beef cattle.

Detection of Genomic Regions with Pleiotropic Effects for Growth and Carcass Quality Traits in the Rubia Gallega Cattle Breed

Simple Summary

The breeding scheme in the Rubia Gallega cattle population is based upon traits measured in farms and slaughterhouses. We have developed a ssGWAS by backsolving the SNP effects after implementing a ssGBLUP. The results showed an apparent heterogeneity of the additive genetic variance across the genome. Some of the genomic regions explaining the most of this additive variance were shared across traits, indicating the presence of pleiotropic effects, which were reflected in their genetic correlations.

Abstract

The breeding scheme in the Rubia Gallega cattle population is based upon traits measured in farms and slaughterhouses. In recent years, genomic evaluation has been implemented by using a ssGBLUP (single-step Genomic Best Linear Unbiased Prediction). This procedure can reparameterized to perform ssGWAS (single-step Genome Wide Association Studies) by backsolving the SNP (single nucleotide polymorphisms) effects. Therefore, the objective of this study was to identify genomic regions associated with the genetic variability in growth and carcass quality traits. We implemented a ssGBLUP by using a database that included records for Birth Weight (BW-327,350 records-), Weaning Weight (WW-83,818-), Cold Carcass Weight (CCW-91,621-), Fatness (FAT-91,475-) and Conformation (CON-91,609-). The pedigree included 464,373 individuals, 2449 of which were genotyped. After a process of filtering, we ended up using 43,211 SNP markers. We used the GBLUP and SNPBLUP model equivalences to obtain the effects of the SNPs and then calculated the percentage of variance explained by the regions of the genome between 1 Mb. We identified 7 regions of the genome for CCW; 8 regions for BW, WW, FAT and 9 regions for CON, which explained the percentage of variance above 0.5%. Furthermore, a number of the genome regions had pleiotropic effects, located at: BTA1 (131–132 Mb), BTA2 (1–11 Mb), BTA3 (32–33 Mb), BTA6 (36–38 Mb), BTA16 (24–26 Mb), and BTA 21 (56–57 Mb). These regions contain, amongst others, the following candidate genes: NCK1, MSTN, KCNA3, LCORL, NCAPG, and RIN3.

Quantitative proteomic analysis of beef tenderness of Piemontese young bulls by SWATH-MS

Quantitative proteomic approach is a suitable way to tackle the beef tenderness. Ten aged-beef samples from Longissimus thoracis of Piemontese breed classified as tender (n = 5) and tough (n = 5) meat were evaluated using SWATH-MS and bioinformatic tools for the identification of the proteins and pathways most influencing tenderness variability. Between the two textural groups, proteomic changes were mainly caused by 43 differentially abundant proteins (DAPs) arranged in reference patterns as displayed by the heat map analysis. Most of these DAPs were associated with energy metabolism. From the functional proteomic analysis, two clusters of proteins, including ACO2, MDH1, MDH2 and CS in one cluster and FBP2, PFKL, LDHA, TPI1 and GAPDH/S in the other cluster, suggest gluconeogenesis, glycolysis and citrate cycle as key pathways for Piemontese breed beef tenderness. These findings contribute to a deeper insight into molecular pathways related to beef tenderness.

Prediction of meat quality traits in the abattoir using portable near-infrared spectrometers: heritability of predicted traits and genetic correlations with laboratory-measured traits

Background

The possibility of assessing meat quality traits over the meat chain is strongly limited, especially in the context of selective breeding which requires a large number of phenotypes. The main objective of this study was to investigate the suitability of portable infrared spectrometers for phenotyping beef cattle aiming to genetically improving the quality of their meat. Meat quality traits (pH, color, water holding capacity, tenderness) were appraised on rib eye muscle samples of 1,327 Piemontese young bulls using traditional (i.e., reference/gold standard) laboratory analyses; the same traits were also predicted from spectra acquired at the abattoir on the intact muscle surface of the same animals 1 d after slaughtering. Genetic parameters were estimated for both laboratory measures of meat quality traits and their spectra-based predictions.

Results

The prediction performances of the calibration equations, assessed through external validation, were satisfactory for color traits (R² from 0.52 to 0.80), low for pH and purge losses (R² around 0.30), and very poor for cooking losses and tenderness (R² below 0.20). Except for lightness and purge losses, the heritability estimates of most of the predicted traits were lower than those of the measured traits while the genetic correlations between measured and predicted traits were high (average value 0.81).

Conclusions

Results showed that NIRS predictions of color traits, pH, and purge losses could be used as indicator traits for the indirect genetic selection of the reference quality phenotypes. Results for cooking losses were less effective, while the NIR predictions of tenderness were affected by a relatively high uncertainty of estimate. Overall, genetic selection of some meat quality traits, whose direct phenotyping is difficult, can benefit of the application of infrared spectrometers technology.

Purebreeding with sexed semen and crossbreeding with semen from double-muscled sires to improve beef production from dairy herds: Live and slaughter performances of crossbred calves

The use of sexed semen to produce purebred replacement heifers allows a large proportion of dairy cows to be mated to beef sires, and quantitative and qualitative improvements to be made to beef production from dairy herds. The major dairy and beef breeds are undergoing rapid genetic improvement as a result of more efficient selection methods, prompting a need to evaluate the meat production of crossbred beef × dairy cattle produced using current genetics. As part of a large project involving 125 commercial dairy farms, we evaluated the combined use of purebreeding with sexed semen and crossbreeding with semen from beef sires, particularly double-muscled breeds. A survey of 1,530 crossbred calves revealed that, whereas purebred dairy calves are destined almost exclusively for veal production, beef × dairy crossbred calves are also destined for beef production after fattening on either the dairy farm of birth or by specialized fatteners. In veal production, compared with Belgian Blue-sired calves (taken as the reference), double-muscled INRA 95-sired calves had a lighter slaughter weight (303 vs. 346 kg), but a greater dressing percent (62.3 vs. 58.4%). Limousin (also known as Limousine)-sired calves had a smaller average daily gain (1.26 vs. 1.34 kg/d), and lighter slaughter (314 vs. 346 kg) and carcass weights (182 vs. 201 kg). Last, Simmental-sired calves had a similar growth rate, but lighter carcass weight (177 vs. 201 kg), smaller dressing percentage (55.3 vs. 58.4%), and smaller muscularity scores (3.25 vs. 3.72). In the case of young bulls and heifers fattened on the dairy farm of birth, Belgian Blue-, Piemontese (also known as Piedmontese)-, and Limousin-sired calves performed similarly; the only exception was that Piemontese-sired calves had a greater dressing percentage. Belgian Blue- and Limousin-sired calves performed similarly when fattened by specialized beef producers. In both veal and beef production, the effects of dam breed were less important than sire breed. Considering the entire project, we can conclude that the combined use of sexed semen for purebreeding and conventional beef semen for terminal crossbreeding improves meat production from dairy herds, especially when the sires are double-muscled beef breeds.

Environmental Factors and Genetic Parameters of Beef Traits in Fleckvieh Cattle Using Field and Station Testing

Simple Summary

Meat production plays an important role in the efficiency of rearing dual-purpose breeds of cattle in Europe. It is generally known and accepted that most of the beef produced in the EU is produced from dairy herds. This fact provided the motivation for analyzing the influence of genetic and environmental factors on the indicators of meat production from Fleckvieh (known also as dairy Simmental) cattle in the Czech Republic and the interrelationships between these factors. The analysis included evaluating the statistical relationship between the degree of fatness, the heritability and genetic correlation with other traits and also the relationship with exterior muscularity. Together with this analysis, the normal indicators, which are usually evaluated in the population, were also analyzed. The results of our study indicate that meat yield traits are positively related to the live weight of the animal. These findings create possibilities for application in breeding strategies of dual-purpose cattle.

Abstract

The goal of this study was to analyze the genetic and environmental factors of selected meat yield indicators in Fleckvieh cattle in the Czech Republic, through the application of station (S) and field (F) testing methods. Data collected from fattened bulls were analyzed for F (n = 9378) and for S (n = 6346). In the F method and the S method, the values of the main meat yield indicators were as follows: carcass weight 402.91 kg (F), 339.37 kg (S); carcass daily gain 626.05 g/day (F), 609.74 g/day (S); SEUROP carcass classification 2.73 (F), 2.19 (S). Environmental factors were found to have a significant impact on the selected meat yield indicators; their heritability ranged from 0.14 (SEUROP classification) to 0.33 (dressing percentage). The genetic trend was significantly positive only in relation to those meat yield traits, which had a positive link to the size or weight of the animal. The genetic correlation between observations obtained in the S and F methods of testing was very high in relation to the carcass daily gain (0.8351) and carcass weight (0.8244), while slightly lower correlations were calculated for the SEUROP classification. A genetic evaluation of the degree of fatness is not routinely performed in Fleckvieh populations, and the newly established heritability for this trait ranges between 0.17–0.20. The genetic correlation between beef yield indicators and the exterior trait of muscularity was also established, and shows a strong link to the net daily gain, the SEUROP classification and body weight (0.79–0.97). The aim of the study was to evaluate the genetic and environmental effects on meat yield and also estimate genetic parameters for new traits. We can also state, based on the results, that a strong positive genetic trend is confirmed, especially in traits related to the size or weight of animals. This result can be used in breeding programs of dual-purpose cattle, where we can genetically improve the meat and milk yield through the body size.

Prediction of meat quality traits in the abattoir using portable and hand-held near-infrared spectrometers

The use of near-infrared spectrometers (NIRS) for predicting meat quality traits directly in the abattoir was tested with three trials. For the calibration trial, spectra were acquired from the cross-cut surface of the Longissimus thoracis muscle on 1166 carcasses of Piemontese young bulls with a portable visible-near-infrared spectrometer (Vis-NIRS) and with a small hand-held instrument (Micro-NIRS). A sample of the same muscle was analyzed to provide the reference. Validation statistics of the two instruments were similar. Predictabilities of meat color and purge loss were good, whereas for the other traits they were less promising. The repeatability trial showed that post-slaughter factors, not predictable by NIR spectra collected in the abattoir, affect reference meat quality values. A trial under operative conditions showed that both spectrometers were able to capture the major sources of variation in most of the meat quality traits. Overall, NIRS could be used to predict the animals' "native" characteristics exploitable for genetic improvement of meat quality traits.

Genome-wide association and pathway analysis of carcass and meat quality traits in Piemontese young bulls

A key concern in beef production is how to improve carcass and meat quality traits. Identifying the genomic regions and biological pathways that contribute to explaining variability in these traits is of great importance for selection purposes. In this study, genome wide-association (GWAS) and pathway-based analyses of carcass traits (age at slaughter (AS), carcass weight (CW), carcass daily gain (CDG), conformation score and rib-eye muscle area) and meat quality traits (pH, Warner-Bratzler shear force, purge loss, cooking loss and colour parameters (lightness, redness, yellowness, chroma, hue)) were conducted using genotype data from the 'GeneSeek Genomic Profiler Bovine LD' array in a cohort of 1166 double-muscled Piemontese beef cattle. The genome wide-association analysis was based on the GRAMMAR-GC approach and identified 37 significant single nucleotide polymorphisms (SNPs), which were associated with 12 traits (P<5 × 10-5). In particular, 14 SNPs associated with CW, CDG and AS were located at 38.57 to 38.94 Mb on Bos taurus autosome 6 and mapped within four genes, that is, Leucine Aminopeptidase 3, Family with Sequence Similarity 184 Member B, Non-SMC Condensin I Complex Subunit G and Ligand-Dependent Nuclear Receptor Corepressor-Like. Strong pairwise linkage disequilibrium was found in this region. For meat quality traits, most associations were 1 SNP per trait, except for a signal on BTA25 (at ~11.96 Mb), which was significant for four of the five meat colour parameters assessed. Gene-set enrichment analyses yielded significant results for six traits (right-sided hypergeometric test, false discovery rate <0.05). In particular, several pathways related to transmembrane transport (i.e., oxygen, calcium, ion and cation) were overrepresented for meat colour parameters. The results obtained provide useful information for genomic selection for beef production and quality in the Piemontese breed.