The air–liquid flow in a microfluidic airway tree

Effect of Non-Newtonian Dynamics on the Clearance of Mucus From Bifurcating Lung Airway Models

Mucus hypersecretion is a common pathophysiological manifestation of several obstructive airway diseases in which the mucociliary clearance is impaired, and the airflow generated by a cough or a forced expiratory maneuver called the huff is primarily responsible for clearing mucus. This airflow driven clearance of mucus is a complex process that is affected by the mucus rheology, airflow rate, airway geometry, and gravity. This study examines the role of mucus rheology in the transport and distribution of mucus in idealized 3D airway geometries. The complex air-mucus interface was tracked by the volume-of-fluid (VOF) model, and the turbulence in the core airflow was modeled using the k-ω shear stress transport (SST) model. Mucus was modeled as a shear-thinning liquid by using a power-law model. The computational model was validated using in vitro experimental data available in the literature. Gravity-dominated eccentric core-annular flow was observed with the core biased toward the outer wall in the inclined daughter branches of the bifurcation models, which transitions into concentric core-annular flow in the trachea. The increase in tangential shear at the interface due to the secondary flow structures developed in the flow divider location resulted in a region of enhanced mucus clearance with reduced mucus layer thickness. Secondary flow developed due to the curvature in the airway geometry resulted in a local redistribution of mucus that reduced the eccentricity. The accumulation of mucus around the carinal ridges and the regions with reduced clearance are sites with the potential for microbial growth.

Conjunctivodacryocystorhinostomy (CDCR) success rates and complications in endoscopic vs non-endoscopic approaches: a systematic review

BACKGROUND

Epiphora due to refractory bicanalicular obstructions is typically managed by conjunctivodacryocystorhinostomy (CDCR) with or without the assistance of nasal endoscopy. However, the evidence for its benefit is unclear.

METHODS

A systematic review of the literature on the treatment of epiphora by CDCR was performed (March 1, 2018). All studies reporting original data on patients suffering from epiphora treated with CDCR surgery were included. Primary outcomes were success and satisfaction rates. Secondary outcomes were CDCR complications. A comparison was made between the results obtained in patients undergoing CDCR with vs without assistance of nasal endoscopy.

RESULTS

Fifty-four studies representing information on 2555 CDCR procedures were included in the systematic review. All the studies are case series, most of them retrospective. Lester Jones tube (LJT) is the most commonly used in CDCR (66.7%). The overall success rate with all studies included (n = 2555) was 88.9%; 90.8% (n = 890) in CDCR with assistance of nasal endoscope and 87.7% (n = 1575) in the non-endoscopic approach. The overall "tube displacement" rate, the most common complication, was 24.5% (n = 2522), 20.8% (n = 1575) tube displacement in CDCR with assistance of nasal endoscope vs 26.7% (n = 1575) in the non-endoscopic approach. Only 3 studies (5.5%) used patient-reported outcome measures (PROMs) to evaluate epiphora improvement. Due to the low level of evidence and the high bias of the studies, a meta-analysis was not performed.

CONCLUSION

Based on the data available in the literature, CDCR is considered an effective procedure for treating epiphora due to proximal obstruction. Controlled and qualitative studies are needed to clarify the significance of the endoscope's contribution to CDCR.

Aerosol delivery into small anatomical airway model through spontaneous engineered breathing

Pulmonary administration is a noninvasive drug delivery method that, in contrast to systemic administration, reduces drug dosage and possible side effects. Numerous testing models, such as impingers and impactors, have previously been developed to evaluate the fate of inhaled drugs. However, such models are limited by the lack of information regarding several factors, such as pulmonary morphology and breathing motion, which are required to fully interpret actual inhaled-drug deposition profiles within the human respiratory tract. In this study, a spontaneous breathing-lung model that integrates branched morphology and deformable alveolar features was constructed using a multilayered fabrication technology to mimic the complex environment of the human lower respiratory tract. The developed model could emulate cyclic and spontaneous breathing motions to inhale and exhale aerosols generated by a nebulizer under diseaselike conditions. Results of this research demonstrate that aerosols (4.2 μm) could reach up to the deeper lung regions (generation 19 of the branched lung structure) within the obstructivelike model, whereas lesser penetration (generation 17) was observed when using the restrictivelike model. The proposed breathing-lung model can serve as a testing platform to provide a comprehensive understanding of the pharmacokinetics of pulmonary drugs within the lower lungs.

Use of three-dimensional organoids and lung-on-a-chip methods to study lung development, regeneration and disease

Differences in lung anatomy between mice and humans, as well as frequently disappointing results when using animal models for drug discovery, emphasise the unmet need for in vitro models that can complement animal studies and improve our understanding of human lung physiology, regeneration and disease. Recent papers have highlighted the use of three-dimensional organoids and organs-on-a-chip to mimic tissue morphogenesis and function in vitro Here, we focus on the respiratory system and provide an overview of these in vitro models, which can be derived from primary lung cells and pluripotent stem cells, as well as healthy or diseased lungs. We emphasise their potential application in studies of respiratory development, regeneration and disease modelling.

A bioinspired microfluidic model of liquid plug-induced mechanical airway injury

Occlusion of distal airways due to mucus plugs is a key pathological feature common to a wide variety of obstructive pulmonary diseases. Breathing-induced movement of airway mucus plugs along the respiratory tract has been shown to generate abnormally large mechanical stresses, acting as an insult that can incite acute injury to the airway epithelium. Here, we describe a unique microengineering strategy to model this pathophysiological process using a bioinspired microfluidic device. Our system combines an air-liquid interface culture of primary human small airway epithelial cells with a microengineered biomimetic platform to replicate the process of mucus exudation induced by airway constriction that leads to the formation of mucus plugs across the airway lumen. Specifically, we constructed a compartmentalized three-dimensional (3D) microfluidic device in which extracellular matrix hydrogel scaffolds reminiscent of airway stroma were compressed to discharge fluid into the airway compartment and form liquid plugs. We demonstrated that this plug formation process and subsequent movement of liquid plugs through the airway channel can be regulated in a precisely controlled manner. Furthermore, we examined the detrimental effect of plug propagation on the airway epithelium to simulate acute epithelial injury during airway closure. Our system allows for a novel biomimetic approach to modeling a complex and dynamic biophysical microenvironment of diseased human airways and may serve as an enabling platform for mechanistic investigation of key disease processes that drive the progression and exacerbation of obstructive pulmonary diseases.

Biomimetics of the pulmonary environment in vitro: A microfluidics perspective

The entire luminal surface of the lungs is populated with a complex yet confluent, uninterrupted airway epithelium in conjunction with an extracellular liquid lining layer that creates the air-liquid interface (ALI), a critical feature of healthy lungs. Motivated by lung disease modelling, cytotoxicity studies, and drug delivery assessments amongst other, in vitro setups have been traditionally conducted using macroscopic cultures of isolated airway cells under submerged conditions or instead using transwell inserts with permeable membranes to model the ALI architecture. Yet, such strategies continue to fall short of delivering a sufficiently realistic physiological in vitro airway environment that cohesively integrates at true-scale three essential pillars: morphological constraints (i.e., airway anatomy), physiological conditions (e.g., respiratory airflows), and biological functionality (e.g., cellular makeup). With the advent of microfluidic lung-on-chips, there have been tremendous efforts towards designing biomimetic airway models of the epithelial barrier, including the ALI, and leveraging such in vitro scaffolds as a gateway for pulmonary disease modelling and drug screening assays. Here, we review in vitro platforms mimicking the pulmonary environment and identify ongoing challenges in reconstituting accurate biological airway barriers that still widely prevent microfluidic systems from delivering mainstream assays for the end-user, as compared to macroscale in vitro cell cultures. We further discuss existing hurdles in scaling up current lung-on-chip designs, from single airway models to more physiologically realistic airway environments that are anticipated to deliver increasingly meaningful whole-organ functions, with an outlook on translational and precision medicine.

Numerical simulation of high inertial liquid-in-gas droplet in a T-junction microchannel

Two new flow regimes named unstable dripping and unstable jetting are identified in aqueous droplet generation within high inertial air flow inside a T-Junction microchannel.

Dynamics of liquid plugs in prewetted capillary tubes: from acceleration and rupture to deceleration and airway obstruction

The dynamics of individual liquid plugs pushed at a constant pressure head inside prewetted cylindrical capillary tubes is investigated experimentally and theoretically. It is shown that, depending on the thickness of the prewetting film and the magnitude of the pressure head, the plugs can either experience a continuous acceleration leading to a dramatic decrease of their size and eventually their rupture or conversely, a progressive deceleration associated with their growth and an exacerbation of the airway obstruction. These behaviors are quantitatively reproduced using a simple nonlinear model [Baudoin et al., Proc. Natl. Acad. Sci. U. S. A., 2013, 110, 859] adapted here for cylindrical channels. Furthermore, an analytical criterion for the transition between these two regimes is derived and successfully compared with extensive experimental data. The potential implications of this work for pulmonary obstructive diseases are discussed.

A Microfluidic Model of Biomimetically Breathing Pulmonary Acinar Airways

Quantifying respiratory flow characteristics in the pulmonary acinar depths and how they influence inhaled aerosol transport is critical towards optimizing drug inhalation techniques as well as predicting deposition patterns of potentially toxic airborne particles in the pulmonary alveoli. Here, soft-lithography techniques are used to fabricate complex acinar-like airway structures at the truthful anatomical length-scales that reproduce physiological acinar flow phenomena in an optically accessible system. The microfluidic device features 5 generations of bifurcating alveolated ducts with periodically expanding and contracting walls. Wall actuation is achieved by altering the pressure inside water-filled chambers surrounding the thin PDMS acinar channel walls both from the sides and the top of the device. In contrast to common multilayer microfluidic devices, where the stacking of several PDMS molds is required, a simple method is presented to fabricate the top chamber by embedding the barrel section of a syringe into the PDMS mold. This novel microfluidic setup delivers physiological breathing motions which in turn give rise to characteristic acinar air-flows. In the current study, micro particle image velocimetry (µPIV) with liquid suspended particles was used to quantify such air flows based on hydrodynamic similarity matching. The good agreement between µPIV results and expected acinar flow phenomena suggest that the microfluidic platform may serve in the near future as an attractive in vitro tool to investigate directly airborne representative particle transport and deposition in the acinar regions of the lungs.

Microfluidic analysis of pressure drop and flow behavior in hypertensive micro vessels

The retinal arterial network is the only source of the highly nutrient-consumptive retina, thus any insult on the arteries can impair the retinal oxygen and nutrient supply and affect its normal function. The aim of this work is to study the influences of vascular structure variation on the flow and pressure characteristics via microfluidic devices. Two sets of micro-channel were designed to mimic the stenosed microvessels and dichotomous branching structure in the retinal arteries. Three working fluids including red blood cell (RBC) suspension were employed to investigate the pressure drop in the stenosed channel. The flow behaviors of RBC suspensions inside the micro channels were observed using high speed camera system. Pressure drop of different working fluids and RBC velocity profiles in the stenosed channel were obtained. Moreover, hematocrit levels of RBC suspensions inside the bifurcated channels were analyzed from the sequential images of RBC flow. The results of the flow in the stenosed channel show that RBCs drift from the center of the channels, and RBC velocity is influenced not only by the inlet flow rate but also the interaction between RBCs. The measured pressure drops in the stenosed channel increase notably with the increase of fluid viscosity. Furthermore, the dimensionless pressure drop due to the stenosis decreases with Reynolds number. On the other hand, the results of flow through the bifurcated channels show that as the ratio of the daughter-branch width to the mother-channel width increases, the ratio of hematocrit in two connected branches (Ht/Hd) decreases, which is in favorable agreement with the available analysis results.

Rapid retraction of microvolume aqueous plugs traveling in a wettable capillary

We report a transport behavior-specifically, rapid retraction movement-of small (∼μL) deionized water plugs traveling in series within a small wettable tubular geometry. In this study, two water plugs separated by a certain distance in a dry cylindrical glass capillary were moved by positive pressure airflow applied at the tube inlet. As the plugs travel, a thin aqueous film is generated between the plugs as a result of the leading plug's aqueous deposition onto the inner surface of the tube. The leading plug continuously loses volume by film deposition onto the surface and eventually ruptures. Then, the lagging plug quickly travels the distance initially separating the two plugs (plug retraction). Our studies show that the rapid retraction of the lagging plug is caused by surface tension in addition to the positive pressure applied. Furthermore, the plug retraction speed is strongly affected by tube radius and the distance between the plugs.

The unusual symmetric reopening effect induced by pulmonary surfactant

This study investigates the stability of a finger of air as it propagates into a liquid-filled model of a liquid-filled model of a pulmonary bifurcation. We seek to elucidate the stability characteristics of the reopening of daughter airways, an event that may be important to the treatment of acute lung disease. To do so, we investigated the symmetry of reopening under conditions of nearly constant surface tension with 1) purified H2O or 2) an anionic surfactant (sodium dodecyl sulfate). Dynamic surface tension was investigated using pulmonary surfactant (Infasurf) with and without the presence of albumin. Flow visualization was accomplished using a microparticle image velocimetry (μ-PIV)/shadowgraph system through which we measured 1) the propagation velocity of the finger of air that reopens each daughter branch, and 2) the instantaneous and averaged velocity field of liquid phase surrounding the tip of the propagating bubble. Only pulmonary surfactant demonstrated the ability of maintaining a nearly symmetric propagation in the daughter channels, which is likely to lead to homogeneous airway reopening. In contrast, when pulmonary surfactant was inactivated by albumin or when the system was held at a nearly constant surface tension, reopening occurred asymmetrically. Our analysis suggests that Infasurf's dynamic surface tension qualities are important to stabilize the removal of liquid obstructions. This demonstrates a new important function of pulmonary surfactant for airway reopening of a multibranched network.

Airway reopening through catastrophic events in a hierarchical network

When you reach with your straw for the final drops of a milkshake, the liquid forms a train of plugs that flow slowly initially because of the high viscosity. They then suddenly rupture and are replaced with a rapid airflow with the characteristic slurping sound. Trains of liquid plugs also are observed in complex geometries, such as porous media during petroleum extraction, in microfluidic two-phase flows, or in flows in the pulmonary airway tree under pathological conditions. The dynamics of rupture events in these geometries play the dominant role in the spatial distribution of the flow and in determining how much of the medium remains occluded. Here we show that the flow of a train of plugs in a straight channel is always unstable to breaking through a cascade of ruptures. Collective effects considerably modify the rupture dynamics of plug trains: Interactions among nearest neighbors take place through the wetting films and slow down the cascade, whereas global interactions, through the total resistance to flow of the train, accelerate the dynamics after each plug rupture. In a branching tree of microchannels, similar cascades occur along paths that connect the input to a particular output. This divides the initial tree into several independent subnetworks, which then evolve independently of one another. The spatiotemporal distribution of the cascades is random, owing to strong sensitivity to the plug divisions at the bifurcations.

Behavior of liquid plugs at bifurcations in a microfluidic tree network

Flows in complex geometries, such as porous media or biological networks, often contain plugs of liquid flowing within air bubbles. These flows can be modeled in microfluidic devices in which the geometric complexity is well defined and controlled. We study the flow of wetting liquid plugs in a bifurcating network of micro-channels. In particular, we focus on the process by which the plugs divide as they pass each bifurcation. The key events are identified, corresponding to large modifications of the interface curvature, the formation of new interfaces, or the division of a single interface into two new ones. The timing of the different events and the amplitude of the curvature variations are analyzed in view of the design of an event-driven model of flow in branching micro-networks. They are found to collapse onto a master curve dictated by the network geometry.

Respiratory physiology on a chip

Our current understanding of respiratory physiology and pathophysiological mechanisms of lung diseases is often limited by challenges in developing in vitro models faithful to the respiratory environment, both in cellular structure and physiological function. The recent establishment and adaptation of microfluidic-based in vitro devices (μFIVDs) of lung airways have enabled a wide range of developments in modern respiratory physiology. In this paper, we address recent efforts over the past decade aimed at advancing in vitro models of lung structure and airways using microfluidic technology and discuss their applications. We specifically focus on μFIVDs covering four major areas of respiratory physiology, namely, artificial lungs (AL), the air-liquid interface (ALI), liquid plugs and cellular injury, and the alveolar-capillary barrier (ACB).