Study of the effects of the applied current regime and the concentration of chromic acid on the transport of Ni2+ ions through Nafion 117 membranes

Electrodialysis as a potential technology for 4-nitrophenol abatement from wastewater

4-Nitrophenol is a widely used emerging pollutant in various industries, including the production of agrochemicals, drugs, and synthetic dyes. Due to its potential environmental harmful effects, there is a need to study its reuse and removal from wastewater. This study used electrodialysis technology to separate 4-nitrophenol ions using a four-compartment stack. The effects of supporting electrolyte concentration, pH, voltages, and current density on the performance of electrodialysis for separating 4-nitrophenol were investigated. A high extraction percentage of 77% was achieved with low energy consumption (107 kWh kg-1) when high 4-nitrophenol flows and transport numbers were reached.

Interplay between Forced Convection and Electroconvection during the Overlimiting Ion Transport through Anion-Exchange Membranes: A Fourier Transform Analysis of Membrane Voltage Drops

Electrodialysis (ED) applications have expanded in recent years and new modes of operation are being investigated. Operation at overlimiting currents involves the phenomenon of electroconvection, which is associated with the generation of vortices. These vortices accelerate the process of solution mixing, making it possible to increase the transport of ions across the membranes. In this work, frequency analysis is applied to investigate the interaction between different parameters on the development of electroconvection near anion-exchange membranes, which would provide a basis for the development of ED systems with favored electroconvection. Chronopotentiometric curves are registered and Fast Fourier Transform analysis is carried out to study the amplitude of the transmembrane voltage oscillations. Diverse behaviors are detected as a function of the level of forced convection and current density. The synergistic combination of forced convection and overlimiting currents leads to an increase in the signal amplitude, which is especially noticeable at frequencies around 0.1 Hz. Fast Fourier Transform analysis allows identifying, for a given system, the conditions that lead to a transition between stable and chaotic electroconvection modes.

A Comprehensive Review of the Current Progress of Chromium Removal Methods from Aqueous Solution

Chromium (Cr) exists in aqueous solution as trivalent (Cr³⁺) and hexavalent (Cr⁶⁺) forms. Cr³⁺ is an essential trace element while Cr⁶⁺ is a dangerous and carcinogenic element, which is of great concern globally due to its extensive applications in various industrial processes such as textiles, manufacturing of inks, dyes, paints, and pigments, electroplating, stainless steel, leather, tanning, and wood preservation, among others. Cr³⁺ in wastewater can be transformed into Cr⁶⁺ when it enters the environment. Therefore, research on Cr remediation from water has attracted much attention recently. A number of methods such as adsorption, electrochemical treatment, physico-chemical methods, biological removal, and membrane filtration have been devised for efficient Cr removal from water. This review comprehensively demonstrated the Cr removal technologies in the literature to date. The advantages and disadvantages of Cr removal methods were also described. Future research directions are suggested and provide the application of adsorbents for Cr removal from waters.

Recovery of nickel in the form of Ni(OH)2 from plating wastewater containing Ni-EDTA using bipolar membrane electrodialysis

Ni is often present in plating wastewater as a complexing state. It is difficult to remove this Ni using traditional chemical precipitation technology. In this study, a bipolar membrane electrodialysis system was used to recover Ni in the form of Ni(OH)₂ from plating wastewater containing Ni-ethylenediaminetetraacetic acid (Ni-EDTA) without adding chemical reagents. The stable structure of Ni-EDTA can be destroyed by H⁺ produced by the bipolar membrane to obtain free Ni²⁺, which can combine with OH^- produced by the bipolar membrane to form Ni(OH)₂. When the electrolyte Na₂SO₄ concentration, current density and initial Ni-EDTA concentration were 0.2 mol/L, 16 mA/cm² and 1000 mg/L, respectively, 99.0% of Ni-EDTA was removed after 32 h. When the system was used to treat actual plating wastewater, 92.1% of Ni-EDTA was removed and 88.7% was recovered. When the number of wastewater compartments in the system was increased from one to three, the current efficiency increased from 1.7% to 5.8%, and the specific energy consumption decreased from 0.39 to 0.19 kW h/g. The results of an X-ray diffraction study indicate that the Ni(OH)₂ obtained in this study is similar to commercial Ni(OH)₂. Moreover, the recovery mechanism of Ni-EDTA was analysed. Thus, bipolar membrane electrodialysis can be regarded as an effective method to recover Ni from wastewater containing Ni-EDTA.

Investigation of ion-exchange membranes by means of chronopotentiometry: A comprehensive review on this highly informative and multipurpose technique

Electrodialysis is mostly used for drinking water production but it has gained applicability in different new fields in recent decades. Membrane characteristics and ion transport properties strongly influence the efficiency of electrodialysis and must be evaluated to avoid an intense energy consumption and ensure long membrane times of usage. To this aim, conducting studies on ion transport across membranes is essential. Several dynamic characterization methods can be employed, among which, chronopotentiometry has shown special relevance because it allows a direct access to the contribution of the potential in different states of the membrane/solution system. The present paper provides a critical review on the use of chronopotentiometry to determine the main membrane transport properties and to evaluate mass transfer phenomena. Properties, such as limiting current density, electrical resistances, plateau length, transport number of counter-ions in the membrane, transition times, and apparent fraction of membrane conductive area have been intensively discussed in the literature and are presented in this review. Some of the phenomena evaluated using this technique are concentration polarization, gravitational convection, electroconvection, water dissociation, and fouling/scaling, all of them also shown herein. Mathematical and experimental studies were considered. New trends in chronopotentiometric studies should include ion-exchange membranes that have been recently developed (presenting anti-fouling, anti-microbial, and monovalent-selective properties) and a deeper discussion on the behaviour of complex solutions that have been often treated by electrodialysis, such as municipal wastewaters. New mathematical models, especially 3D ones, are also expected to be developed in the coming years.

Mathematical Modeling of the Effect of Pulsed Electric Field on the Specific Permselectivity of Ion-Exchange Membranes

The application of pulsed electric field (PEF) in electrodialysis has been proven to be efficient for a number of effects: increasing mass transfer rate, mitigation of scaling and fouling, reducing water splitting. Recently, the improvement of the membrane permselectivity for specific counterions was discovered experimentally by the group of Laurent Bazinet (N. Lemay et al. J. Memb. Sci. 604, 117878 (2020)). To better understanding the effect of PEF in electrodialysis, simulations were performed using a non-stationary mathematical model based on the Nernst–Planck and Poisson equations. For the first time, it was not only the condition used when the current density is specified but also the condition when the voltage is set. A membrane and two adjacent diffusion layers are considered. It is shown that when applying the regime used by Lemay et al. (the same current density in conventional continuous current (CC) mode and during the pulses in PEF mode), there is a significant gain in specific permselectivity. It is explained by a reduction in the membrane concentration polarization in PEF mode. In the CC mode of electrodialysis, increasing current density leads to a loss in specific permselectivity: concentration profiles in the diffusion layers and membrane are formed in such a way that ion diffusion reduces the migration flux of the preferentially transferred ion and increases that of the poorly transferred ion. In PEF mode, the concentration profiles are partially restored during the pauses when the current is zero. However, if a different condition is used than the condition applied by Lemay et al., that is, when the same average current density is applied in both the PEF and CC modes, there is no gain in specific permeability. It is shown that within the framework of the applied mathematical model, the specific selectivity depends only on the average current density and does not depend on the mode of its application (CC or PEF mode).

Trade-Off between Operating Time and Energy Consumption in Pulsed Electric Field Electrodialysis: A Comprehensive Simulation Study

Electrodialysis (ED) has been recently introduced in a variety of processes where the recovery of valuable resources is needed; thus, enabling sustainable production routes for a circular economy. However, new applications of ED require optimized operating modes ensuring low energy consumptions. The application of pulsed electric field (PEF) electrodialysis has been demonstrated to be an effective option to modulate concentration polarization and reduce energy consumption in ED systems, but the savings in energy are usually attained by extending the operating time. In the present work, we conduct a comprehensive simulation study about the effects of PEF signal parameters on the time and energy consumption associated with ED processes. Ion transport of NaCl solutions through homogeneous cation-exchange membranes is simulated using a 1-D model solved by a finite-difference method. Increasing the pulse frequency up to a threshold value is effective in reducing the specific energy consumption, with threshold frequencies increasing with the applied current density. Varying the duty cycle causes opposed effects in the time and energy usage needed for a given ED operation. More interestingly, a new mode of PEF functions with the application of low values of current during the relaxation phases has been investigated. This novel PEF strategy has been demonstrated to simultaneously improve the time and the specific energy consumption of ED processes.

Layer-by-layer modification of cation exchange membranes controls ion selectivity and water splitting

The present study investigates the possibility of inducing monovalent ion permselectivity on standard cation exchange membranes, by the layer-by-layer (LbL) assembly of poly(ethyleneimine) (PEI)/poly(styrenesulfonate) (PSS) polyelectrolyte multilayers. Coating of the (PEI/PSS)N LbL multilayers on the CMX membrane caused only moderate variation of the ohmic resistance of the membrane systems. Nonetheless, the polyelectrolyte multilayers had a substantial influence on the monovalent ion permselectivity of the membranes. Permselectivity comparable to that of a commercial monovalent-ion-permselective membrane was obtained with only six bilayers of polyelectrolytes, yet with significantly lower energy consumption per mole of Na(+) ions transported through the membranes. The monovalent ion permselectivity stems from an increased Donnan exclusion for divalent ions and hydrophobization of the surface of the membranes concomitant to their modification. Double-layer capacitance obtained from impedance measurements shows a qualitative indication of the divalent ion repulsion of the membranes. At overlimiting current densities, water dissociation occurred at membranes with PEI-terminated layers and increased with the number of layers, while it was nearly absent for the PSS-terminated layers. Hence, LbL layers allow switching on and turning off water splitting at the surface of ion exchange membranes.