Using zwitterionic amino acid l-DOPA to modify the surface of thin film composite polyamide reverse osmosis membranes to increase their fouling resistance

Immobilized enzymatic membrane surfaces for biocatalytic organics removal and fouling resistance

This research reported on the immobilization of environmentally friendly enzymes, such as horseradish peroxidase (HRP) and laccase (L), along with the hydrophilic zwitterionic compound l-DOPA on nano-filtration (NF) membranes. This approach introduced biocatalytic membranes, leveraging combined effects between membranes and enzymes. The aim was to systematically assess the efficacy of the enzymatic modified membrane (HRP-NF) in degrading colors in the wastewater, as well as enhancing the membrane resistance toward organic fouling. The enzymatic immobilized membrane demonstrated 96.3 ± 1.8% to 96.6 ± 1.9% removal of colors, and 65.2 ± 1.3% to 67.2 ± 1.3% removal of TOC. This result was underpinned by the insights obtained from the radical scavenger coumarin, which was employed to trap and confirm the formation of PRs through the reaction of enzymes and H2O2. Furthermore, membranes modified with enzymes exhibited significantly improved antifouling properties. The HRP-NF membrane experienced an 8% decline in flux, while the co-immobilized HRP-L-NF membrane demonstrated as low as 6% flux decline, contributed by the synergistic effect of increased hydrophilicity and biocatalytic effects. These findings confirmed that the immobilized enzymatic surface has added function of degrading contaminants in addition to separation function of nanofiltration membrane. These l-DOPA-immobilized enzymatic membranes offered a promising hybrid biocatalytic membrane to eliminate dyes and mitigate membrane fouling, which can be applied in many industrial and domestic water and wastewater treatment.

Preparation and antifouling performance of low-pressure carbon nanotube membranes based on polydopamine biomimetic modification

In order to investigate the antifouling performance of low-pressure carbon nanotube membranes based on polydopamine (PDA) biomimetic modification, layered multi-walled carbon nanotubes PDA membrane (layered MWCNTs-PDA) and PDA blended MWCNTs membrane (blended PDA/MWCNTs) were prepared. The MWCNTs membranes' antifouling performance and recoverability was significantly improved in filtrating BSA, HA and SA after PDA biomimetic modification, and the total fouling and irreversible fouling were all decreased. Compared with the blended PDA/MWCNTs membrane, the layered MWCNTs-PDA membrane had higher antifouling property as it further improved the electronegativity and hydrophilicity of membrane surface. In addition, denser surface pore size of the layered MWCNTs-PDA membrane can effectively reduce the fouling by trapping foulants on its surface. The combination of PDA biomimetic modification with MWCNTs membrane had a superior antifouling performance and rejection performance in processing NOM and artificial wastewater, and the majority of humic-like foulants could be excluded by the layered MWCNTs-PDA membrane. PDA biomimetic modification alleviated the adhesion of FITC-BSA on the MWCNTs membrane. The layered MWCNTs-PDA membrane especially alleviated the attachment of bacteria and processed excellent antimicrobial ability for bacteria.

Bioinspired N-Oxide-Based Zwitterionic Polymer Brushes for Robust Fouling-Resistant Surfaces

Fouling-resistant surfaces are needed for various environmental applications. Inspired by superhydrophilic N-oxide-based osmolytes in saltwater fish, we demonstrate the use of a trimethylamine N-oxide (TMAO) analogue for constructing fouling-resistant surfaces. The readily synthesized N-oxide monomer of methacrylamide is grafted to filtration membrane surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP). Successful grafting of the amine N-oxide brush layer as confirmed by material characterization endows the surface with increased hydrophilicity, reduced charge, and decreased roughness. Notably, the introduction of the N-oxide layer does not compromise transport properties, i.e., water permeability and water-salt selectivity. Moreover, the modified membrane exhibits improved antifouling properties with a lower flux decline (32.1%) and greater fouling reversibility (18.55%) than the control sample (45.4% flux decline and 3.26% fouling reversibility). We further evaluate foulant-membrane interaction using surface plasmon resonance (SPR) to relate the reduced fouling tendency to the synergic effects of surface characteristic changes after amine N-oxide modification. Our results demonstrate the promise and potential of the N-oxide-based polymer brushes for the design of fouling resistance surfaces for a variety of emerging environmental applications.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

Zwitterionic Biomaterials

The term "zwitterionic polymers" refers to polymers that bear a pair of oppositely charged groups in their repeating units. When these oppositely charged groups are equally distributed at the molecular level, the molecules exhibit an overall neutral charge with a strong hydration effect via ionic solvation. The strong hydration effect constitutes the foundation of a series of exceptional properties of zwitterionic materials, including resistance to protein adsorption, lubrication at interfaces, promotion of protein stabilities, antifreezing in solutions, etc. As a result, zwitterionic materials have drawn great attention in biomedical and engineering applications in recent years. In this review, we give a comprehensive and panoramic overview of zwitterionic materials, covering the fundamentals of hydration and nonfouling behaviors, different types of zwitterionic surfaces and polymers, and their biomedical applications.

Impacts of seasonality and operating conditions on algal-dual osmosis membrane system for potable water reuse: Part 2

This study investigated the impact of seasonal variation and operating conditions on recovery of potable quality water from municipal wastewater effluent using an integrated algal treatment process with a dual forward osmosis (FO)-reverse osmosis (RO) membrane system. Pilot study of the algal process treating primary effluent validated the technical viability and seasonal performance during warm weather (May to October, 25-55 °C) using an extremophilic algal strain Galdieria sulphuraria, and during cold weather (November to April, 4-17 °C) using polyculture strains of algae and bacteria. Algal effluents from both seasons were used as the feed solution for the laboratory FO-RO study. In addition, pilot-scale FO-RO experiments were conducted to compare the system performance during treatment of algal effluent and secondary effluent from the conventional treatment facility. At 90% water recovery, the FO-RO achieved over 90% overall rejection of major ions and organic matter using the bench-scale system and over 99% rejection of all contaminants in pilot-scale studies. Detailed water quality analysis indicated that the product water from the integrated system met both the primary and secondary drinking water standards. This study demonstrated that the FO-RO system can be engineered as a viable alternative to treat algal effluent and secondary effluent for potable water reuse independent of seasonal variations and operating conditions.

Biomolecule-Enabled Liquid Separation Membranes: Potential and Recent Progress

The implementation of membrane surface modification to enhance the performance of membrane-based separation has become a favored strategy due to its promise to address the trade-off between water permeability and salt rejection as well as to improve the durability of the membranes. Tremendous work has been committed to modifying polymeric membranes through physical approaches such as surface coating and ontology doping, as well as chemical approaches such as surface grafting to introduce various functional groups to the membrane. In the context of liquid separation membranes applied for desalination and water and wastewater treatment, biomolecules have gained increasing attention as membrane-modifying agents due to their intriguing structural properties and chemical functionalities. Biomolecules, especially carbohydrates and proteins, exhibit attractive features, including high surface hydrophilicity and zwitterionic and antimicrobial properties that are desired for liquid separation membranes. In this review, we provide an overview of the recent developments in biomolecule-enabled liquid separation membranes. The roles and potentials of some commonly explored biomolecules in heightening the performance of polymeric membranes are discussed. With the advancements in material synthesis and the need to answer the call for more sustainable materials, biomolecules could serve as attractive alternatives for the development of high-performance composite membranes.

Fouling control in reverse osmosis for water desalination & reuse: Current practices & emerging environment-friendly technologies

Reverse Osmosis (RO) is becoming increasingly popular for seawater desalination and wastewater reclamation. However, fouling of the membranes adversely impacts the overall process efficiency and economics. To date, several strategies and approaches have been used in RO plants and investigated at the laboratory-scale for their effectiveness in the control of different fouling types. Amid growing concerns and stringent regulations for the conservation of environment, there is an increasing trend to identify technologies that are effective in fouling mitigation as well as friendly to the environment. The present review elaborates on the different types of environment-friendly technologies for membrane fouling control that are currently being used or under investigation. It commences with a brief introduction to the global water crisis and the potential of membrane-based processes in overcoming this problem. This is followed by a section on membrane fouling that briefly describes the major fouling types and their impact on the membrane performance. Section 3 discusses the predominant fouling control/prevention strategies including feedwater pretreatment, membrane and spacer surface modification and membrane cleaning. The currently employed techniques are discussed together with their drawbacks, with some light being shed on the emerging technologies that have the ability to overcome the current limitations. The penultimate section provides a detailed discussion on a variety of eco-friendly/chemical free techniques investigated to control different fouling types. These include both control and prevention strategies, for example, bioflocculation and electromagnetic fields, as well as remediation techniques such as osmotic backwashing and gas purging. In addition, quorum sensing has been specifically discussed for biofouling remediation. The promising findings from different studies are presented followed by a discussion on their drawbacks and limitations. The review concludes with a need for carrying out fundamental studies to develop better understanding of the eco-friendly processes discussed in the penultimate section and their optimization for possible integration into the RO plants.

Codeposition of Levodopa and Polyethyleneimine: Reaction Mechanism and Coating Construction

Mussel-inspired poly(catecholamine) coatings from polydopamine (PDA) have been widely studied to design functional coatings for various materials. The chemical precursor of dopamine (DA), levodopa (l-DOPA, 3,4-dihydroxyphenyl-l-alanine), is known as the main element of mussel adhesive foot protein, but it is relatively hard to be constructed into a desirable coating on a given material surface under the same conditions as those for DA. Herein, we report a codeposition strategy to achieve the rapid fabrication of mussel-inspired coatings by l-DOPAwith polyethyleneimine (PEI) and to deeply understand the formation mechanism of those aggregates and coatings from l-DOPA/PEI. DFT calculations, fluorescence spectra, nuclear magnetic resonance analysis, and liquid chromatography-tandem mass spectrometry identification demonstrate that the formation of l-DOPA/PEI aggregates is effectively accelerated by PEI crosslinking with those intermediates of oxidized l-DOPA, including l-DOPAquinone and 5,6-dihydroxyindole-2-carboxylic acid as well as 5,6-dihydroxyindole, through Michael-addition and Schiff-base reactions. Therefore, we can facilely control the growth rate and the particle size of the l-DOPA/PEI aggregates in the deposition solution by adjusting the concentration of PEI. The coating formation rate of l-DOPA/PEI is four times faster than that of PDA and DA/PEI within 12 h. These l-DOPA/PEI coatings are demonstrated to display potential as structure colors, superhydrophilic surfaces, and antibacterial materials.

Impact of MWCO and Dopamine/Polyethyleneimine Concentrations on Surface Properties and Filtration Performance of Modified Membranes

The mussel-inspired method has been investigated to modify commercial ultrafiltration membranes to induce antifouling characteristics. Such features are essential to improve the feasibility of using membrane processes in protein recovery from waste streams, wastewater treatment, and reuse. However, some issues still need to be clarified, such as the influence of membrane pore size and the polymer concentration used in modifying the solution. The aim of the present work is to study a one-step deposition of dopamine (DA) and polyethyleneimine (PEI) on ultrafiltration membrane surfaces. The effects of different membrane molecular weight cut-offs (MWCO, 20, 30, and 50 kDa) and DA/PEI concentrations on membrane performance were assessed by surface characterization (FTIR, AFM, zeta potential, contact angle, protein adsorption) and permeation of protein solution. Results indicate that larger MWCO membranes (50 kDa) are most benefited by modification using DA and PEI. Moreover, PEI is primarily responsible for improving membrane performance in protein solution filtration. The membrane modified with 0.5:4.0 mg mL^-1 (DA: PEI) presented a better performance in protein solution filtration, with only 15% of permeate flux drop after 2 h of filtration. The modified membrane can thus be potentially applied to the recovery of proteins from waste streams.

Electrostatically coupled SiO2 nanoparticles/poly (L-DOPA) antifouling coating on a nanofiltration membrane

In this work, the fouling resistance of TFC (thin film composite) nanofiltration membranes have been enhanced using an electrostatically coupled SiO₂ (silica dioxide) nanoparticles/poly(L-DOPA) (3-(3,4-dihydroxyphenyl)-l-alanine) antifouling coating. SiO₂ nanoparticles were synthesized in different size ranges and combined with L-DOPA; and then coated as an anti-fouling layer on the membrane surface by recirculated deposition. Membranes were coated with S-NP (silica nanoparticles) in small (19.8 nm), medium (31.6 nm) and large (110.1 nm) sizes. The zwitterionic compound L-DOPA in the form of self-polymerized poly(L-DOPA) (PDOPA) helped with the attachment of the S-NP to the membrane surface. It was confirmed by AFM (atomic force microscopy) measurement that coating of membranes led to an increase in hydrophilicity and reduction in surface roughness, which in turn led to a 60% reduction in the adhesion force of the foulant on the membrane as compared to the neat membrane. The modified membranes experienced almost no flux decline during the filtration experimental period, whereas the unmodified membrane showed a sharp flux decline. The best coating conditions of silica nanoparticles resulting in enhanced anti-fouling properties were identified. The biofouling film formation on the membranes was evaluated quantitatively using the flow cytometry method. The results indicated that the modified membranes had 50% lower microbial population growth in terms of total event count compared to the neat membrane. Overall, the experimental results have confirmed that the coating of electrostatically coupled SiO₂ nanoparticles and PDOPA (S-NP/PDOPA) on TFC-NF (nanofiltration) membrane surfaces is effective in improving the fouling resistance of the membranes. This result has positive implications for reducing membrane fouling in desalination and industrial wastewater treatment applications.

Quantitative Interpretation of Hydration Dynamics Enabled the Fabrication of a Zwitterionic Antifouling Surface

In the medical industry, zwitterionic brushes have received significant attention owing to their antifouling effect that arose from their hydration ability. However, sufficient understanding of the hydration dynamics of zwitterionic brushes is required to fabricate the precisely controlled antifouling medical devices. In this paper, we successfully show that hydration, the interaction between water molecules and zwitterionic brushes, and its dynamics can be evaluated logically and quantitatively using (i) water contact angle, (ii) molecular dynamics simulation, and (iii) Raman spectroscopy. Based on the intuitive results on hydration, we precisely optimized the antifouling property of the model medical device, a removable orthodontic retainer, with various grafting efficiencies of 2-methacryloyloxyethyl phosphate choline. As a result, the model device reduced nonspecific adsorption of proteins and bacteria, indicating an improved antifouling effect, and also inhibited the formation of a biofilm. Furthermore, the device showed excellent physical properties desirable for application in the orthodontic field, meaning the balance between the antibacterial property and mechanical strength.

A nanofiltration membrane prepared by PDA-C3N4 for removal of divalent ions

In this study, a positively charged nanofiltration (NF) membrane was prepared by interfacial polymerization for separation of divalent cations, whereby a nanomaterial (modified graphitic carbon nitride (g-C₃N₄) with poly(dopamine), PDA-C₃N₄) was incorporated into the active layer of the NF membrane. PDA-C₃N₄ sheets were synthesized from g-C₃N₄ sheets prepared by thermal oxidation of melamine, and the preparation conditions of NF membrane were also optimized. The results show that the roughness of PDA-C₃N₄ embedded NF membrane decreases, and the hydrophilicity and the permeation increase. The membrane also shows high rejection for divalent cations (Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺ and Zn²⁺) but low rejection (36.8%) for monovalent cation (Li⁺), as well as good fouling resistance performance. The fabricated membrane has the potential for treatment of industrial wastewater.

Properties of Electropolymerized Dopamine and Its Analogues

This work reports a study of electropolymerization kinetics, film thickness, stability, and antifouling properties of polydopamine (PDA) and its three analogues: poly(3-(3,4-dihydroxyphenyl)-l-alanine) (PL-DOPA), poly(5-hydroxytryptophan) (PL-5-HTP), and poly(Adrenalin) (PAdrenalin). It was observed that the number of the hydroxyl groups on the benzene ring and the type (primary vs secondary) of amine group significantly affect the electropolymerization kinetics and thus the thickness of the obtained polymer films. Monomers with two hydroxyl groups (except Adrenalin) resulted in films that were thicker (∼10-15 nm) than the one with only one hydroxyl group (PL-5-HTP) (∼5-8 nm) under similar conditions. Adrenalin containing a secondary amino group could not be deposited onto the ITO substrate, while the other three compounds containing a primary amino group completely covered the ITO. The PDA films had better electrochemical stability than the other films. No film showed stable antifouling surfaces against protein.

Mussel-Inspired Surface Functionalization of PET with Zwitterions and Silver Nanoparticles for the Dual-Enhanced Antifouling and Antibacterial Properties

Herein, we designed and constructed a dual functional surface with antimicrobial and antifouling abilities to prevent protein and bacterial attachment that are significant challenges in biomedical devices. Primary amino-group-capped sulfobetaine of DMMSA was synthesized and then grafted onto polydopamine pretreated PET sheets via click chemistry. The sheets were subsequently immersed into silver ion solution, in which the absorbed silver ions were reduced to silver nanoparticles (AgNPs) in situ by a polydopamine layer. The antifouling assays demonstrated that the resultant PET/DMMSA/AgNPs sheets exhibited great antifouling performances against bovine serum albumin (BSA), bovine fibrinogen (BFG), platelets, and bacteria, the critical proteins/microorganisms leading to implant failure. The antibacterial data suggested that the sheets had dual functions as inhibitors of bacterial growth and bactericide and could efficiently delay the biofilm formation. This repelling and killing approach is green and simple, with potential biomedical applications.

Antifouling enhancement of polyimide membrane by grafting DEDA-PS zwitterions

In order to improve the water flux and antifouling property of polyimide (PI) membrane, zwitterions are grafted on PI membrane surface via a two-step modification route by reactions with N,N-diethylethylenediamine (DEDA) and 1,3-propane sultone (PS) sequentially. The reaction mechanism and physicochemical properties of membranes are confirmed via various characterization techniques. The anti-biofouling performance of the zwitterion-grafted PI membranes is evaluated by bacterial suspension immersion tests in Escherichia coli (E. coli) and staphylococcus aureus (S. aureus) solutions. The antifouling property is assessed via the filtration test using the bovine serum albumin (BSA) and dodecyl trimethyl ammonium bromide (DTAB) aqueous feed solutions. The effect of the reaction time with DEDA in the zwitterion-grafted process on the antifouling property is further investigated systematically. The results show that both the anti-biofouling and antifouling performances of zwitterion-grafted PI membranes are significantly improved.

Antifouling membranes for sustainable water purification: strategies and mechanisms

One of the greatest challenges to the sustainability of modern society is an inadequate supply of clean water. Due to its energy-saving and cost-effective features, membrane technology has become an indispensable platform technology for water purification, including seawater and brackish water desalination as well as municipal or industrial wastewater treatment. However, membrane fouling, which arises from the nonspecific interaction between membrane surface and foulants, significantly impedes the efficient application of membrane technology. Preparing antifouling membranes is a fundamental strategy to deal with pervasive fouling problems from a variety of foulants. In recent years, major advancements have been made in membrane preparation techniques and in elucidating the antifouling mechanisms of membrane processes, including ultrafiltration, nanofiltration, reverse osmosis and forward osmosis. This review will first introduce the major foulants and the principal mechanisms of membrane fouling, and then highlight the development, current status and future prospects of antifouling membranes, including antifouling strategies, preparation techniques and practical applications. In particular, the strategies and mechanisms for antifouling membranes, including passive fouling resistance and fouling release, active off-surface and on-surface strategies, will be proposed and discussed extensively.

Recent Advances in the Fabrication of Membranes Containing "Ion Pairs" for Nanofiltration Processes

In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing “ion pairs”. In this review, the effects of “ion pairs” characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with “ion pairs” are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with “ion pairs”.