Immobilized enzymatic membrane surfaces for biocatalytic organics removal and fouling resistance

This research reported on the immobilization of environmentally friendly enzymes, such as horseradish peroxidase (HRP) and laccase (L), along with the hydrophilic zwitterionic compound l-DOPA on nano-filtration (NF) membranes. This approach introduced biocatalytic membranes, leveraging combined effects between membranes and enzymes. The aim was to systematically assess the efficacy of the enzymatic modified membrane (HRP-NF) in degrading colors in the wastewater, as well as enhancing the membrane resistance toward organic fouling. The enzymatic immobilized membrane demonstrated 96.3 ± 1.8% to 96.6 ± 1.9% removal of colors, and 65.2 ± 1.3% to 67.2 ± 1.3% removal of TOC. This result was underpinned by the insights obtained from the radical scavenger coumarin, which was employed to trap and confirm the formation of PRs through the reaction of enzymes and H2O2. Furthermore, membranes modified with enzymes exhibited significantly improved antifouling properties. The HRP-NF membrane experienced an 8% decline in flux, while the co-immobilized HRP-L-NF membrane demonstrated as low as 6% flux decline, contributed by the synergistic effect of increased hydrophilicity and biocatalytic effects. These findings confirmed that the immobilized enzymatic surface has added function of degrading contaminants in addition to separation function of nanofiltration membrane. These l-DOPA-immobilized enzymatic membranes offered a promising hybrid biocatalytic membrane to eliminate dyes and mitigate membrane fouling, which can be applied in many industrial and domestic water and wastewater treatment.

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles for photocatalytic ozonation of lomefloxacin

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles were prepared by a simple sol-gel auto-combustion process and used for the photocatalytic ozonation of lomefloxacin (LOM). The morphology, crystallinity, and structure of the synthesized CuFe2O4 and P-CuFe2O4 nanoparticles were investigated using various techniques. The high-performance liquid chromatography (HPLC) analysis revealed that the degradation of LOM achieved a 99% reduction after a duration of 90 min in the photocatalytic ozonation system. In accordance with the charge-to-mass ratio, four intermediates were proposed with the help of their fragments obtained in LC-MS/MS. The degradation kinetics of lomefloxacin followed a pseudo-first order reaction, and the degradation mechanism was proposed based on the results. P0.035Cu0.965Fe2O4 showed the highest total organic carbon (TOC) removal with 20.15% in 90 min, highest specific surface area and the highest fluoride and ammonium production using the ion chromatography (IC). The experimental results obtained from the electron paramagnetic resonance (EPR) analysis indicated that the modified P-CuFe2O4 samples exhibited significantly elevated levels of superoxide (.O2-) production compared to the CuFe2O4 samples. The findings of this study demonstrate that the introduction of phosphorus modification into the copper ferrite photocatalyst led to an augmentation of both the specific surface area and the total pore volume. Furthermore, the incorporation of phosphorus served to promote the efficient separation of electron-hole pairs by effectively trapping electrons in the conduction band, hence enhancing the degradation efficiency.

Cotransplantation of marginal mass allogeneic islets with 3D culture-derived adult human skin cells improves glycemia in diabetic mice

Islet transplantation represents a therapeutic option for type 1 diabetes (T1D). Long-term viability of transplanted islets requires improvement. Mesenchymal stromal cells (MSCs) have been proposed as adjuvants for islet transplantation facilitating grafting and functionality. Stem cell aggregation provides physiological interactions between cells and enhances the in situ concentration of modulators of inflammation and immunity. We established a hanging-drop culture of adult human skin fibroblast-like cells as spheroids, and skin spheroid-derived cells (SphCs) were characterized. We assessed the potential of SphCs in improving islet functionality by cotransplantation with a marginal mass of allogeneic islets in an experimental diabetic mouse model and characterized the secretome of SphCs by mass spectrometry-based proteomics. SphCs were characterized as multipotent progenitors and their coculture with anti-CD3 stimulated mouse splenocytes decreased CD4+ T cell proliferation with skewed cytokine secretion through an increase in the Th2/Th1 ratio profile. SphCs-conditioned media attenuated apoptosis of islets induced by cytokine challenge in vitro and importantly, intratesticular SphCs administration did not show tumorigenicity in immune-deficient mice. Moreover, SphCs improved glycemic control when cotransplanted with a marginal mass of allogeneic islets in a diabetic mouse model without pharmacological immunosuppression. SphCs' protein secretome differed from its paired skin fibroblast-like counterpart in containing 70% of up- and downregulated proteins and biological processes that overall positively influenced islets such as cytoprotection, cellular stress, metabolism, and survival. In summary, SphCs improved the performance of transplanted allogeneic islets in an experimental T1D model, without pharmacological immunosuppression. Future research is warranted to identify SphCs-secreted factors responsible for islets' endurance.

Environmental fate of sulfonated-PCBs: Soil partitioning properties, bioaccumulation, persistence, and mobility

Two new classes of PCB metabolites were recently discovered: sulfonated-polychlorinated biphenyls (sulfonated-PCBs) and hydroxy-sulfonated-polychlorinated biphenyls (OH-sulfonated-PCBs). These metabolites, originating from PCB degradation, seem to possess more polar characteristics than their parent compounds. However, no other information, such as their chemical identity (CAS number) or their ecotoxicity or toxicity, is available so far, although more than about one hundred different chemicals were observed in soil samples. In addition, their physico-chemical properties are still uncertain since only estimations are available. Here we show the first evidence on the fate of these new classes of contaminants in the environment, producing results from several experiments, to evaluate sulfonated-PCBs and OH-sulfonated-PCBs soil partition coefficients, degradation in soil after 18 months of rhizoremediation, uptake into plant roots and earthworms, as well as a preliminary analytical method to extract and concentrate these chemicals from water. The results give an overview of the expected environmental fate of these chemicals and open questions for further studies.

From Batch to the Semi-Continuous Flow Hydrogenation of pNB, pNZ-Protected Meropenem

Meropenem is currently the most common carbapenem in clinical applications. Industrially, the final synthetic step is characterized by a heterogeneous catalytic hydrogenation in batch mode with hydrogen and Pd/C. The required high-quality standard is very difficult to meet and specific conditions are required to remove both protecting groups [i.e., p-nitrobenzyl (pNB) and p-nitrobenzyloxycarbonyl (pNZ)] simultaneously. The three-phase gas-liquid-solid system makes this step difficult and unsafe. The introduction of new technologies for small-molecule synthesis in recent years has opened up new landscapes in process chemistry. In this context, we have investigated meropenem hydrogenolysis using microwave (MW)-assisted flow chemistry for use as a new technology with industrial prospects. The reaction parameters (catalyst amount, T, P, residence time, flow rate) in the move from the batch process to semi-continuous flow were investigated under mild conditions to determine their influence on the reaction rate. The optimization of the residence time (840 s) and the number of cycles (4) allowed us to develop a novel protocol that halves the reaction time compared to batch production (14 min vs. 30 min) while maintaining the same product quality. The increase in productivity using this semi-continuous flow technique compensates for the slightly lower yield (70% vs. 74%) obtained in batch mode.

Synthesis of a new sulfonated-hexachlorobiphenyl standard for environmental analysis, ecotoxicological, and toxicological studies

Sulfonated-polychlorinated biphenyls (sulfonated-PCBs) are a newly discovered class of PCB metabolites. They were observed for the first time in polar bear serum and lately, in soil, together with hydroxy-sulfonated-PCBs. Their presence is ubiquitous in soils, and their estimated physical chemical properties show high mobility in water, compared to the parent compounds. However, no single pure standards exist so far and therefore their quantification in the environmental matrices is not accurate. Additionally, pure standards are needed to experimentally determine their physical chemical properties, as well as the ecotoxicological and toxicological characteristics. In the present work, the challenging goal of preparing a polychlorinated biphenyl monosulfonic acid was achieved exploring different synthetic approaches, along which the selection of the starting material resulted in a crucial point. Using PCB-153 (2,2'-4,4'-5,5'-hexachloro-1,1'-biphenyl) the synthesis afforded, as the major species, a side compound. On the contrary, the use of PCB-155 (2,2'-4,4'-6,6'-hexachloro-1,1'-biphenyl), a symmetric hexachlorobiphenyl derivative showing chlorine atoms at all the ortho positions, gave the target sulfonated-PCB compound. In this case, sulfonation was successfully carried out through a two-step procedure, involving chlorosulfonylation and the subsequent hydrolysis of the chlorosulfonyl intermediate.

Towards Antibiotic Synthesis in Continuous-Flow Processes

Continuous-flow chemistry has become a mainstream process and a notable trend among emerging technologies for drug synthesis. It is routinely used in academic and industrial laboratories to generate a wide variety of molecules and building blocks. The advantages it provides, in terms of safety, speed, cost efficiency and small-equipment footprint compared to analog batch processes, have been known for some time. What has become even more important in recent years is its compliance with the quality objectives that are required by drug-development protocols that integrate inline analysis and purification tools. There can be no doubt that worldwide government agencies have strongly encouraged the study and implementation of this innovative, sustainable and environmentally friendly technology. In this brief review, we list and evaluate the development and applications of continuous-flow processes for antibiotic synthesis. This work spans the period of 2012-2022 and highlights the main cases in which either active ingredients or their intermediates were produced under continuous flow. We hope that this manuscript will provide an overview of the field and a starting point for a deeper understanding of the impact of flow chemistry on the broad panorama of antibiotic synthesis.

Acrylamide adsorption by Enterococcus durans and Enterococcus faecalis: In vitro optimization, simulated digestive system and binding mechanism

Acrylamide is an unsaturated amide that forms in heated, starchy food products. This study was conducted to (1) examine the ability of 38 LAB to remove acrylamide; (2) optimize acrylamide removal of selected LAB under various conditions (pH, temperature, time and salt) using the Box–Behnken design (BBD); (3) the behavior of the selected LAB under the simulated gastrointestinal conditions; and (4) investigate the mechanism of adsorption. Out of the 38 LAB, Enterococcus durans and Enterococcus faecalis had the highest results in removing acrylamide, with 33 and 30% removal, respectively. Those two LAB were further examined for their binding abilities under optimized conditions of pH (4.5–6.5), temperature (32°C - 42°C), time (14–22 h), and NaCl (0–3% w/v) using BBD. pH was the main factor influenced the acrylamide removal compared to other factors. E. durans and E. faecalis exhibited acrylamide removal of 44 and 53%, respectively, after the in vitro digestion. Zeta potential results indicated that the changes in the charges were not the main cause of acrylamide removal. Transmission electron microscopes (TEM) results indicated that the cell walls of the bacteria increased when cultured in media supplemented with acrylamide.

Cefonicid Benzathine Salt: A Convenient, Lean, and High-Performance Protocol to Make an Old Cephalosporin Shine

Cefonicid is a second-generation cephalosporin sold under the brand name Sintocef™. It is an injectable drug obtained via a freeze-drying process and is also available for oral preparations. The high-quality standard required is very challenging to satisfy, and current production protocols are characterized by steps that are lengthy and cumbersome, making the product unattractive for the international market. Industrial R&D is constantly working on the process optimization for API synthesis, with the aim of increasing productivity and decreasing production costs and waste. We herein report a new and efficient method for the synthesis of the cefonicid benzathine salt that provides a good yield and high product stability. The double-nucleophilic and lipophilic nature of N',N″-dibenzylethylene diacetate enables the deformylation of the OH-protected group on the mandelic moiety and also enables product crystallization to occur. We demonstrate that the formyl group in the peculiar position has high reactivity, promoting an amidation reaction that deprotects a hydroxy group and generates a new C-N bond in the reaction by-product. Several amines and OH-protected groups have been studied, but none were able to replicate the excellent results of benzathine diacetate.

Coupling Long-Range Facet Junction and Interfacial Heterojunction via Edge-Selective Deposition for High-Performance Z-Scheme Photocatalyst

The construction of photocatalytic systems that have strong redox capability, effective charge separation, and large reactive surfaces is of great scientific and practical interest. Herein, an edge-connected 2D/2D Z-scheme system that combines the facet junction and the interfacial heterojunction to achieve effective long-range charge separation and large reactive surface exposure is designed and fabricated. The heterostructure is realized by the selective growth of 2D-layered MoS₂ nanoflakes on the edge-sites of thin TiO₂ nanosheets via an Au-promoted photodeposition method. Attributed to the synergetic coupling of the facet junction and the interfacial heterojunction that assures the effective charge separation, and the tremendous but physically separated reactive sites offered by layered MoS₂ and highly-exposed (001) facets of TiO₂ , respectively, the artificial Z-scheme exhibits excellent photocatalytic performance in photodegradation tests. Moreover, the junctional plasmonic Au nanoclusters not only act as electron traps to promote the edge-selective synthesis but also generate "hot electrons" to further boost photocatalytic performance. The Z-scheme charge-flow direction in the heterostructure and the roles of electrons and holes are comprehensively studied using in situ irradiated X-ray photoelectron spectroscopy and photodegradation tests. This work offers a new insight into designing high-performance Z-scheme photocatalytic systems.

Design of a Microfluidic Photocatalytic Reactor for Removal of Volatile Organic Components: Process Simulation and Techno-Economic Assessment

This study reports on a gas-phase photocatalytic microreactor (MR) employed for the degradation of 2-propanol in indoor air. A process flow diagram was developed and simulated in Aspen Hysys V10, and a techno-economic assessment was carried out based on the simulated results. An economic evaluation was carried out using a fixed and demand-dependent variable cost model. Decreasing the mass flow rate or the initial concentration of the 2-propanol in indoor air and increasing the diameter or length of the MR resulted in a better air remediation efficacy. Sensitivity analysis for the economics of the manufactured MR showed that the optimal plant production volume is 10,000 units per year. At this volume, the total manufacturing cost was 2.8 M$/y with a production cost of $ 127 per unit and a levelized cost of a MR (LCOM) of about $ 280 per unit. These findings herein can help bolster research into both technical and economic aspects of MR production for the photocatalytic remediation of air. The resulting design could be applied in air conditioner units and other home ventilation units for the removal of harmful volatile organic compounds in the air.

Acrylamide Elimination by Lactic Acid Bacteria: Screening, Optimization, In Vitro Digestion, and Mechanism

Acrylamide is a toxic compound that is formed in cooked carbohydrate-rich food. Baking, roasting, frying, and grilling are cooking methods that cause its formation in the presence of reducing sugar and asparagine. To prevent acrylamide formation or to remove it after its formation, scientists have been trying to understand acrylamide formation pathways, and methods of prevention and removal. Therefore, this study aimed to: (1) screen newly isolated LAB for acrylamide removal, (2) optimize conditions (pH, temperature, time, salt) of the acrylamide removal for selected LAB isolates using Box-Behnken design (BBD), (3) investigate the acrylamide removal abilities of selected LAB isolates under the in vitro digestion conditions using INFO-GEST2.0 model, and (4) explore the mechanism of the acrylamide removal using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS), zeta potential, transmission electron microscopy (TEM) measurement, and Fourier transform infrared spectroscopy (FTIR). Forty strains were tested in MRS broth, where Streptococcus lutetiensis and Lactiplantibacillus plantarum had the highest capability of acrylamide removal by 39% and 26%, respectively. To enhance the binding ability, both strains were tested under controlled conditions of pH (4.5, 5.5 and 6.5), temperature (32 °C, 37 °C and 42 °C), time (14, 18 and 22 h), and NaCl (0%, 1.5% and 3% w/v) using Box-Behnken design (BBD). Both strains removed more acrylamide in the range of 35–46% for S. lutetiensis and 45–55% for L. plantarum. After testing the bacterial binding ability, both strains were exposed to a simulated gastrointestinal tract environment, removing more than 30% of acrylamide at the gastric stage and around 40% at the intestinal stage. To understand the mechanism of removal, LAB cells were characterized via scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) and transmission electron microscopy (TEM) techniques. Cell charges were characterized by zeta potential and functional groups analyzed by Fourier transform infrared spectroscopy (FTIR). Results indicated that increasing cell wall thickness improved acrylamide adsorption capacity. Both FTIR and EDS indicated that functional groups C=O, C-O, and N-H were associated with acrylamide adsorption.

Micronized cellulose from citrus processing waste using water and electricity only

Along with a water-soluble fraction rich in pectin, the hydrodynamic cavitation of citrus processing waste carried out in water demonstrated directly on semi-industrial scale affords an insoluble fraction consisting of micronized cellulose of low crystallinity ("CytroCell"). Lemon and grapefruit CytroCell respectively consist of 100-500 nm wide cellulose nanorods, and of 500-1000 nm wide ramified microfibrils extending for several μm. These findings establish a technically viable route to low crystallinity micronized cellulose laying in between nano- and microcellulose, using water and electricity only.

A new process for the recovery of palladium from a spent Pd/TiO2 catalyst through a combination of mild acidic leaching and photodeposition on ZnO nanoparticles

Currently, palladium represents an expensive and scarce element in the Earth’s crust, with the mineral resources of Platinum group metals (PGMs) predominately localized in South Africa and Russia. The growing...

Current and future perspectives on catalytic-based integrated carbon capture and utilization

There exist several well-known methods with varying maturity for capturing carbon dioxide from emission sources of different concentrations, including absorption, adsorption, cryogenics and membrane separation, among others. The capture and separation steps can produce almost pure CO₂, but at substantial cost for being conditioned for transport and final utilization, with high economical risks to be considered. A possible way for the elimination of this conditioning and cost is direct CO₂ utilization, whether on-site in a further process but within the same plant, or in-situ, coupling both capture and conversion in the same unit. This approach is usually called integrated carbon capture and utilization (ICCU) or integrated carbon capture and conversion (ICCC), and has lately started receiving considerable attention in many circles. As CO₂ is already industrially employed in other sectors, such as food preservation, water treatment and conversion to high added-value chemicals and fuels such as methanol, methane, etc., among others, it is of great interest to explore the global ICCC approach. Catalytic-based processes play a key role in CO₂ conversion, and different technologies are gaining great attention from both academia and industry. However, the 'big picture of ICCU' and in which technology the efforts should focus on at large scale is still unclear. This review analyzes some promising concepts of ICCU specifically on CO₂ catalytic conversion, highlighting their current commercial relevance as well as challenges that have to be faced today and in the next future.

A review of recent and emerging antimicrobial nanomaterials in wastewater treatment applications

In this paper, we present a critical review on antimicrobial nanomaterials with demonstrated potential for application as a disinfection technology in wastewater treatment. Studies involving fabrication and testing of antimicrobial nanomaterials for wastewater treatment were gathered, critically reviewed, and analyzed. Our review shows that there are only a few eligible candidate nanoparticles (NPs) (metal and metal oxide) that can adequately serve as an antimicrobial agent. Nanosilver (nAg) was the most studied and moderately understood metal NPs with proven antimicrobial activity followed by ZnO (among antimicrobial metal oxide NPs) which outperformed titania (in the absence of light) in efficacy due to its better solubility in aqueous condition. The direction of future work was found to be in the development of antimicrobial nanocomposites, since they provide more stability for antimicrobial metal and metal oxides NPs in water, thereby increasing their activity. This review will serve as an updated survey, yet touching also the fundamentals of the antimicrobial activity, with vital information for researchers planning to embark on the development of superior antimicrobial nanomaterials for wastewater treatment applications.

Antiscaling 3D printed feed spacers via facile nanoparticle coating for membrane distillation

Surface modification of feed spacers rather than membranes may hold more merit as an antiscaling strategy in membrane distillation (MD), as it avoids compromising the functionality of MD membrane. In this work, an antiscaling polyamide 3D printed spacer was developed for MD. The surface of the printed spacer was coated with fluorinated silica (FS) nanoparticles synthesized via a sol-gel process. The sol-gel approach used to synthesize the FS nanoparticles is considered a convenient and easy approach for engineering the spacer's surface structure and roughness. The performance of the FS coated printed surface was evaluated against other coating materials of different chemical properties. The coated surfaces were characterized using water contact angle measurements, ATR-FTIR, Raman, FESEM-EDX, atomic force and 3D microscopes. The 3D printed surface's microscale roughness and hydrophobicity increased, while its surface-free energy decreased with FS nanoparticles coating. The antiscaling performance of uncoated and FS coated spacers was then assessed in a direct contact MD process, using a scale-inducing aqueous solution of calcium sulfate as its feed. The scalant (Ca²⁺) attachment on the FS coated spacer was 0.24 mg cm^-2, 74% lower than on the uncoated 3D spacer (0.95 mg cm^-2). Also, by using the antiscaling FS coated spacer, scaling on the membrane surface dropped by 60%. The predominant factors that helped minimize scaling with FS coating were microscale roughness-induced hydrophobicity and reduced surface-free energy that weakened the scalant 's interaction with the spacer surface.

Rabdomiólise em militares: uma missão de reconhecimento para prevenção

O treinamento físico regular faz parte do cotidiano militar, com intuito de aprimorar competências físicas essenciais para tarefas de combate. No entanto, quando executado de forma extenuante ou desenvolvido em condições climáticas adversas pode ocasionar o desenvolvimento da rabdomiólise por esforço físico. A rabdomiólise por esforço físico é definida como uma síndrome decorrente da necrose das células musculares, com sintomas variáveis, como dor muscular, fraqueza e aumento plasmático de enzimas musculares. A severidade da rabdomiólise por esforço físico varia individualmente, porém, pode se tornar clinicamente relevante, contribuindo para a hospitalização, insuficiência renal aguda, incapacidade permanente ou óbito. Sendo assim, o objetivo desta revisão narrativa é apresentar possíveis causas e fatores de risco para rabdomiólise, discutir sua fisiopatologia, seus possíveis diagnósticos e suas principais complicações, enfatizando o contexto militar.

Selective photocatalytic oxidation of 3-pyridinemethanol on platinized acid/base modified TiO2

TEM micrographs of selected platinized samples.

A Direct, Regioselective and Atom-Economical Synthesis of 3-Aroyl-N-hydroxy-5-nitroindoles by Cycloaddition of 4-Nitronitrosobenzene with Alkynones

We introduced a regioselective and atom-economical procedure for the synthesis of 3-substituted indoles by annulation of nitrosoarenes with ethynyl ketones. The reactions were carried out achieving indoles without any catalyst and with excellent regioselectivity. No traces of 2-aroylindole products were detected. Working with 4-nitronitrosobenzene as starting material, the 3-aroyl-N-hydroxy-5-nitroindole products precipitated from the reaction mixtures and were isolated by filtration without any further purification technique. Differently from the corresponding N-hydroxy-3-aryl indoles that, spontaneously in solution, give dehydrodimerization products, the N-hydroxy-3-aroyl indoles are stable and no dimerization compounds were observed.

Alkaline treatment as a means to boost the activity of TiO2 in selective photocatalytic processes

In this work, the activity enhancement of TiO₂ photocatalysts by alkaline treatment has been investigated.

Identification of Sulfonated and Hydroxy-Sulfonated Polychlorinated Biphenyl (PCB) Metabolites in Soil: New Classes of Intermediate Products of PCB Degradation?

In this paper we describe the identification of two classes of contaminants: sulfonated-PCBs and hydroxy-sulfonated-PCBs. This is the first published report of the detection of these chemicals in soil. They were found, along with hydroxy-PCBs, in soil samples coming from a site historically contaminated by the industrial production of PCBs and in background soils. Sulfonated-PCB levels were approximately 0.4-0.8% of the native PCB levels in soils and about twice the levels of hydroxy-sulfonated-PCBs and hydroxy-PCBs. The identification of sulfonated-PCBs was confirmed by the chemical synthesis of reference standards, obtained through the sulfonation of an industrial mixture of PCBs. We then reviewed the literature to investigate for the potential agents responsible for the sulfonation. Furthermore, we predicted their physicochemical properties and indicate that, given the low pK_a of sulfonated- and hydroxy-sulfonated-PCBs, they possess negligible volatility, supporting the case for in situ formation from PCBs. This study shows the need of understanding their origin, their role in the degradation path of PCBs, and their fate, as well as their (still unknown) toxicological and ecotoxicological properties.

Hydrogen and Propane Production From Butyric Acid Photoreforming Over Pt-TiO2

Photocatalysis is a promising technology from economic, energetic, and ecological points of view because it takes advantage of solar light. Hence, it is one of the investigated green routes to produce hydrogen from renewable energy resources. Butyric acid (BA) is largely present in wastewater and as an intermediate product in anaerobic digestion and therefore it is an inexpensive resource, which can be converted to valuable chemicals. In this work, photoreforming of butyric acid (BAPR) under UV light in aqueous suspensions of platinum-modified titanium dioxide-based catalysts is reported for the first time. Titania nanotubes (TNT) synthesized and calcined at different temperatures (300, 400, 500°C) and commercial TiO₂ (P25), decorated with platinum nanoparticles, have been tested and characterized through different techniques including X-ray powder diffraction, UV-vis diffuse reflectance and photoluminescence spectroscopy, transmission electron microscopy, BET and porosimetry analysis. The main identified products of the BAPR were H₂, propane, CO₂ and several organic acids (e.g., pentanoic and 3-methylhexanoic acid). It has been found that the morphology and crystallinity of the photocatalysts affected dramatically their optical properties and, consequently, the reaction rate and the product distribution. Specifically, the highest conversion of BA (X_BA) and selectivity toward H₂ (S_H2) was recorded with P25-Pt (X_BA = 26.9%, S_H2 = 47.2% after 8 h of irradiation). TNT-400-Pt showed the highest selectivity toward propane (S_C3H8 = 16.1%) with X_BA = 23.4% and S_H2 = 36.2%. The activity results in conjunction with the characterization of the catalysts highlighted that the main factor affecting the activity in terms of X_BA and generation of H₂ was the crystallinity, and in particular the presence of rutile phase in TiO₂, whereas S_C3H8 appears to increase when the electron-holes recombination is lower.

Synthesis and Spectroscopic Characterization of 2-(het)Aryl Perimidine Derivatives with Enhanced Fluorescence Quantum Yields

Perimidines are a particularly versatile family of heterocyclic compounds, whose properties are exploited in several applications ranging from industrial to medicinal chemistry. The molecular structure of perimidine incorporates a well-known efficient fluorophore, i.e.: 1,8-diaminonaphthalene. The high fluorescence quantum yield shared by most naphthalene derivatives, has enabled their use as stains for bio-imaging and biophysical characterizations. However, fluorescence is dramatically depressed in perimidine as well as in the few of its derivatives analysed so far to this respect. The use of perimidine-like molecules in life sciences might be notably fostered by enhancement of their fluorescence emission. Even more excitingly, the concomitance of both biologically active moieties and a fluorophore in the same molecular structure virtually discloses application of perimidines as drug compounds in state-of-art theranostics protocols. However, somewhat surprisingly, relatively few attempts were made until now in the direction of increasing the performances of perimidines as fluorescent dyes. In this work we present the synthesis and spectroscopic characterization of four perimidine derivatives designed to this aim, two of which result to be endowed with fluorescence quantum yields comparable to 1,8-diaminonaphthalene. A rationalization for such improved behaviour has been attempted employing TD-DFT calculations, which have unravelled the interrelations among bond structure, lone pair conjugation, local electron density changes and fluorescence quantum yield.

A novel synthesis of N-hydroxy-3-aroylindoles and 3-aroylindoles

A straightforward indole synthesis via annulation of C-nitrosoaromatics with conjugated terminal alkynones was realised achieving a simple, highly regioselective, atom- and step economical access to 3-aroylindoles in moderate to good yields. Further functionalizations of indole scaffolds were investigated and an easy way to JWH-018, a synthetic cannabinoid, was achieved.

The influence of nitrogen doping on the electronic structure of the valence and conduction band in TiO2

X-ray emission spectroscopy (XES) and X-ray absorption spectroscopy (XAS) provide a unique opportunity to probe both the highest occupied and the lowest unoccupied states in matter with bulk sensitivity. In this work, a combination of valence-to-core XES and pre-edge XAS techniques are used to determine changes induced in the electronic structure of titanium dioxide doped with nitrogen atoms. Based on the experimental data it is shown that N-doping leads to incorporation of the p-states on the occupied electronic site. For the conduction band, a decrease in population of the lowest unoccupied d-localized orbitals with respect to the d-delocalized orbitals is observed. As confirmed by theoretical calculations, the N p-states in TiO₂ structure are characterized by higher binding energy than the O p-states which gives a smaller value of the band-gap energy for the doped material.

Photocatalytic ozonation under visible light for the remediation of water effluents and its integration with an electro-membrane bioreactor

Photocatalysis and photocatalytic ozonation under visible light have been applied for the purification of a complex aqueous matrix such as the grey water of Masdar City (UAE), by using N-doped brookite-rutile catalysts. Preliminary runs on 4-nitrophenol (4-NP) solutions allowed to test the reaction system in the presence of a model pollutant and to afford the relevant kinetic parameters of the process. Subsequently, the remediation of grey water effluent has been evaluated in terms of the reduction of total organic carbon (TOC) and bacterial counts. The concentration of the most abundant inorganic ionic species in the effluent has been also monitored during reaction. Photocatalytic ozonation under visible light allowed to reduce the TOC content of the grey water by ca. 60% in the optimized experimental conditions and to reduce the total bacterial count by ca. 97%. The extent of TOC mineralization reached ca. 80% when the photocatalytic ozonation occurred downstream to a preliminary electro-membrane bioreactor (eMBR). Coupling the two processes enhanced the global efficiency. In fact, the eMBR treatment lowered the turbidity and the organic load of the effluent entering the photocatalytic ozonation treatment, which in turn enhanced the extent of purification and disinfection.

Influence of fluorine on the synthesis of anatase TiO2 for photocatalytic partial oxidation: are exposed facets the main actors?

The influence of fluorine on TiO₂ exposed facets and on the physico-chemical properties was evaluated and a synergetic effect of the presence of fluorine and the facets' distribution was observed.

Antifouling and Photocatalytic Antibacterial Activity of the AquaSun Coating in Seawater and Related Media

Prolonged testing of the new xerogel photocatalytic coating AquaSun applied to a surface probe immersed in ocean water irradiated with simulated solar radiation shows excellent action against biofouling. Activated by moderate solar radiation, the organosilica film has also good antimicrobial properties. Considering the high stability, the environmental footprint, and the low cost of this sol-gel marine coating, the technology has significant potential toward replacing conventional antifouling and foul-release coatings with a single product of broad applicability.

Quinone-related hexacyclic by-products in the production process of exemestane

Exemestane, a 3rd-generation aromatase inhibitor, is clinically used in the treatment of breast cancer in postmenopausal women. The key step of the industrial synthetic process, i.e., a dehydrogenation to introduce the Δ¹-unsaturation, is normally performed with quinones such as p-chloranil or DDQ. We observed the formation of two different hexacyclic by-products, depending on the quinone used in the oxidation step. These compounds arise from an initial [4+2] cycloaddition between the precursor 6-methylenandrost-4-ene-3,17-dione and the quinone reagent, followed by a twofold dehydrohalogenation (with p-chloranil) or dehydrogenation (with DDQ). The structures of these unprecedented hexacyclic adducts were determined by a combination of mass spectrometry, NMR techniques and crystallographic analysis.

Citrate-stabilized gold nanoparticles hinder fibrillogenesis of a pathological variant of β2-microglobulin

Nanoparticles have repeatedly been shown to enhance fibril formation when assayed with amyloidogenic proteins. Recently, however, evidence casting some doubt about the generality of this conclusion started to emerge. Therefore, to investigate further the influence of nanoparticles on the fibrillation process, we used a naturally occurring variant of the paradigmatic amyloidogenic protein β₂-microglobulin (β2m), namely D76N β2m where asparagine replaces aspartate at position 76. This variant is responsible for aggressive systemic amyloidosis. After characterizing the interaction of the variant with citrate-stabilized gold nanoparticles (Cit-AuNPs) by NMR and modeling, we analyzed the fibril formation by three different methods: thioflavin T fluorescence, native agarose gel electrophoresis and transmission electron microscopy. The NMR evidence indicated a fast-exchange interaction involving preferentially specific regions of the protein that proved, by subsequent modeling, to be consistent with a dimeric adduct interacting with Cit-AuNPs. The fibril detection assays showed that AuNPs are able to hamper D76N β2m fibrillogenesis through an effective interaction that competes with protofibril formation or recruitment. These findings open promising perspectives for the optimization of the nanoparticle surface to design tunable interactions with proteins.

Integrated Nano- and Macroscale Investigation of Photoinduced Hydrophilicity in TiO2 Thin Films

The hydrophilicity of titanium dioxide has been investigated for films, deposited on glass by e-beam evaporation, being exposed to UV radiation and subjected to thermal annealing. The wettability alteration has been showed to depend upon both treatments, and insights into how to introduce more stable hydrophilicity into these films have been presented for the sake of boosting their commercial value. Observations from multiple length scales to assess the wetting behavior of as-deposited and high-temperature annealed samples were assessed through macroscopic measurements, i.e., water contact angle measurements, showing that the annealed crystalline samples, treated at 500 °C, are much more hydrophilic (SCA ≈ 20°) than as-deposited TiO₂ films (SCA ≈ 90°), and the nanoscopic experiments performed by amplitude modulation (AM) atomic force microscopy (AFM) indicated that this increased hydrophilicity is related to an enhanced adhesion force and surface energy, resulting in the partial crystallization of TiO₂ and the consequent formation of crystals on its surface rather than being related to morphologic differences. XRD and Raman measurements have highlighted that the crystallinity of the TiO₂ film is crucial in determining its hydrophilicity, in good agreement with the AFM study. The results also indicated that, after irradiation, the samples treated at 500 °C preserve their hydrophilicity for a significant time compared to previous studies.

Direct identification of trypanosomatids by matrix-assisted laser desorption ionization-time of flight mass spectrometry (DIT MALDI-TOF MS)

Accurate and rapid determination of trypanosomatids is essential in epidemiological surveillance and therapeutic studies. Matrix-assisted laser desorption ionization/time of flight mass spectrometry (MALDI-TOF MS) has been shown to be a useful and powerful technique to identify bacteria, fungi, metazoa and human intact cells with applications in clinical settings. Here, we developed and optimized a MALDI-TOF MS method to profile trypanosomatids. trypanosomatid cells were deposited on a MALDI target plate followed by addition of matrix solution. The plate was then subjected to MALDI-TOF MS measurement to create reference mass spectra library and unknown samples were identified by pattern matching using the BioTyper software tool. Several m/z peaks reproducibly and uniquely identified trypanosomatids species showing the potentials of direct identification of trypanosomatids by MALDI-TOF MS. Moreover, this method discriminated different life stages of Trypanosoma cruzi, epimastigote and bloodstream trypomastigote and Trypanosoma brucei, procyclic and bloodstream. T. cruzi Discrete Typing Units (DTUs) were also discriminated in three clades. However, it was not possible to achieve enough resolution and software-assisted identification at the strain level. Overall, this study shows the importance of MALDI-TOF MS for the direct identification of trypanosomatids and opens new avenues for mass spectrometry-based detection of parasites in biofluids. Copyright © 2016 John Wiley & Sons, Ltd.

Nanoflower-Like Bi2 WO6 Encapsulated in ORMOSIL as a Novel Photocatalytic Antifouling and Foul-Release Coating

Herein, the first multi-purpose antifouling and foul-release photocatalytic coating based on ORMOSIL thin films doped with nanoflower-like Bi2 WO6 is described. Irradiation with visible light of the new films immersed in water produces significant amounts of H2 O2 by photocatalytic oxidation of water, and allows the degradation of (bio)organic pollutants at the outer surface of the xerogel film.

Recent advances and perspectives in the synthesis of bioactive coumarins

The impressive pharmacological properties shown by a number of coumarins have led to extraordinarily large emphasis being placed on the design of more efficient and greener synthetic procedures to produce them.