Maxwell–Stefan modeling of the separation of H2 and CO2 at high pressure in an MFI membrane

Modeling the transport of CO2, N2, and their binary mixtures through highly permeable silicalite-1 membranes using Maxwell-Stefan equations

Carbon dioxide (CO₂) is the main contributor to global warming; therefore, research efforts aim at its capture. Membranes, in particular, zeolite membranes offer a promising approach for CO₂ separation and capture. Membranes are typically characterized by their selectivity and permeance that are highly dependent on the operating conditions namely, total feed pressure and composition. Therefore, more reliable characterization parameters are required such as Maxwell- Stefan exchange diffusivities. In this work, a model based on Maxwell-Stefan equations and Extended Langmuir isotherm was developed to investigate the transport of binary mixtures of CO₂ and N₂ through thin silicalite-1 membranes. The exchange diffusivities, D₁₂ and D₂₁, of CO₂ and N₂ were determined at different total feed pressures and feed compositions. All gas separation tests were conducted at stage cut not exceeding 5%. The single component diffusivities of CO₂ and N₂ required by the model were found experimentally using the results of the respective single gas permeation tests. The results displayed that as CO₂ concentration in the feed increased from 15% to 85%, the values of D₁₂ and D₂₁ decreased from 2.8 × 10^-10 to 1.1 × 10^-10 m²/s and 2.8 × 10^-10 to 1.3 × 10^-10 m²/s, respectively, while the N₂ permeance decreased by about one order of magnitude from 2.7 × 10^-7 to 2.4 × 10^-8 mol/m².s.Pa. Consequently, the exchange diffusivities showed considerably smaller dependence on the operating conditions compared to the permselectivity and permeance. Hence, they are more appropriate in describing the intrinsic transport characteristics of silicalite-1 membranes.

CO2 capture using membrane contactors: a systematic literature review

With fossil fuel being the major source of energy, CO2 emission levels need to be reduced to a minimal amount namely from anthropogenic sources. Energy consumption is expected to rise by 48% in the next 30 years, and global warming is becoming an alarming issue which needs to be addressed on a thorough technical basis. Nonetheless, exploring CO2 capture using membrane contactor technology has shown great potential to be applied and utilised by industry to deal with post- and pre-combustion of CO2. A systematic review of the literature has been conducted to analyse and assess CO2 removal using membrane contactors for capturing techniques in industrial processes. The review began with a total of 2650 papers, which were obtained from three major databases, and then were excluded down to a final number of 525 papers following a defined set of criteria. The results showed that the use of hollow fibre membranes have demonstrated popularity, as well as the use of amine solvents for CO2 removal. This current systematic review in CO2 removal and capture is an important milestone in the synthesis of up to date research with the potential to serve as a benchmark databank for further research in similar areas of work. This study provides the first systematic enquiry in the evidence to research further sustainable methods to capture and separate CO2.

CO2 and CH4 permeation through zeolitic imidazolate framework (ZIF)-8 membrane synthesized via in situ layer-by-layer growth: an experimental and modeling study

In this work, a general model representing the permeation of CO₂ and CH₄ through Zeolitic Imidazole Framework-8 (ZIF-8) membrane synthesized via in situ layer-by-layer growth under microwave irradiation is developed.

A predictive mass transport model for gas separation using glassy polymer membranes

The NELF model was used for estimating gas sorption in non-equilibrium glassy polymers and a predictive mass transfer model was developed.

Zeolite membranes – a review and comparison with MOFs

The latest developments in zeolite and MOF membranes are reviewed, with an emphasis on synthesis techniques. Industrial applications, hydrothermal stability, polymer-supported and mixed matrix membranes are some of the aspects discussed.