Kinetic study of tyrosinase immobilized on polymeric membrane

Development of a model to study browning caused by tyrosinase in grape must

Enzymatic browning caused by polyphenol oxidases, tyrosinase and laccase, continues to be one of the main problems in winemaking. Therefore, wineries are very interested in studying the mechanisms of browning and procedures for decreasing the use sulphur dioxide. This research proposes a model to study tyrosinase activity from grape must using different substrates: one monophenol (p-hydroxybenzoic acid), two diphenols (caftaric acid and (-)-epicatechin) and one triphenol (gallic acid). The kinetic constants of tyrosinase, Vmax and KM, indicate that caftaric acid is the best substrate for tyrosinase, followed in decreasing order by (-)-epicatechin, gallic acid and p-hydroxybenzoic acid. This last acid does not appear to be susceptible to browning by the action of grape must tyrosinase. The influence of pH, temperature and ethanol on grape must tyrosinase were also determined and the results indicate that tyrosinase Vmax increases when pH and temperature are higher and that the presence of ethanol reduces it.

Pancreatic lipase immobilization on cellulose filter paper for inhibitors screening and network pharmacology study of anti-obesity mechanism

The discovery of pancreatic lipase (PL) inhibitors is an essential route to develop new anti-obesity drugs. In this experiment, chitosan was used to add amino groups to cellulose filter paper (CFP) and then glutaraldehyde was used to covalently combine PL with amino-modified CFP through the Schiff base reaction. Under optimal immobilization conditions, CFP immobilized PL has a wide range of pH and temperature tolerance, as well as excellent reproducibility, reusability and storage stability. Subsequently, 26 natural products (NPs) were screened by immobilized PL with black tea extract having the highest inhibition rate. Three compounds with binding effects on PL (epigallocatechin gallate, theaflavin-3-gallate and theaflavin-3,3'-digallate) were captured. Molecular docking proved that these three compounds have a strong binding affinity for PL. Fluorescence spectra further revealed that theaflavin-3,3'-digallate could statically quench the intrinsic fluorescence of pancreatic lipase. The molecular docking and thermodynamic parameters indicated that electrostatic interaction was considered as the main interaction force between PL and theaflavin-3,3'-digallate. Finally, the potential anti-obesity targets and pathways of the three compounds were discussed through network pharmacology. This study not only proposes a simple and efficient method for screening PL inhibitors, but also sheds light on the anti-obesity mechanism of active compounds in black tea.

Tyrosinase covalently immobilized on carboxyl functionalized magnetic nanoparticles for fishing of the enzyme's ligands from Prunellae Spica

In this study, tyrosinase was immobilized on carboxyl functionalized silica-coated magnetic nanoparticles for the first time to be used for fishing of tyrosinase's ligands present in complex plant extract. The immobilized tyrosinase was characterized by transmission electron microscopy, vibrating sample magnetometry, Fourier transform infrared spectroscopy, thermo-gravimetric analyzer, and atomic force microscopy. The reusability and thermostability of the immobilized tyrosinase were found significantly superior to its free counterpart. Two tyrosinase's ligands, that is, caffeic acid (1) and rosmarinic acid (2), were fished out from extract of the traditional Chinese medicine Prunellae Spica by the immobilized tyrosinase. Compound 1 was found to be an activator of the enzyme with the half maximal effective concentration value of 0.27 ± 0.06 mM, while compound 2 was an inhibitor with the half maximal inhibitory concentration value of 0.14 ± 0.03 mM. Taking advantage of the convenience of magnetic separation and specific extraction ability of ligand fishing, the proposed method exhibited great potential for screening of bioactive compounds from complex matrices.

Piezoelectric inkjet printing of tyrosinase (polyphenol oxidase) enzyme on atmospheric plasma treated polyamide fabric

Tyrosinase enzyme was digitally printed on plasma pretreated polyamide-6,6 fabric using several sustainable technologies. Ink containing carboxymethyl cellulose was found to be the most suitable viscosity modifier for this enzyme. Before and after being deposited on the fabric surface, the printed inks retained enzyme activity of 69% and 60%, respectively, compared to activity prior printing process. A good number of the printed enzyme was found to be strongly adsorbed on the fabric surface even after several rinsing cycles due to surface activation by plasma treatment. Rinsed out fabrics retained a maximum activity of 34% resulting from the well-adsorbed enzymes. The activity of tyrosinase on printed fabrics was more stable than ink solution for at least 60 days. Effects of pH, temperature and enzyme kinetics on ink solution and printed fabrics were assessed. Tyrosinase printed synthetic fabrics can be utilized for a range of applications from biosensing and wastewater treatment to cultural heritage works.

Mechano-chemical and biological energetics of immobilized enzymes onto functionalized polymers and their applications

Enzymes of commercial importance, such as lipase, amylase, laccase, phytase, carbonic anhydrase, pectinase, maltase, glucose oxidase etc., show multifunctional features and have been extensively used in several fields including fine chemicals, environmental, pharmaceutical, cosmetics, energy, food industry, agriculture and nutraceutical etc. The deployment of biocatalyst in harsh industrial conditions has some limitations, such as poor stability. These drawbacks can be overcome by immobilizing the enzyme in order to boost the operational stability, catalytic activity along with facilitating the reuse of biocatalyst. Nowadays, functionalized polymers and composites have gained increasing attention as an innovative material for immobilizing the industrially important enzyme. The different types of polymeric materials and composites are pectin, agarose, cellulose, nanofibers, gelatin, and chitosan. The functionalization of these materials enhances the loading capacity of the enzyme by providing more functional groups to the polymeric material and hence enhancing the enzyme immobilization efficiency. However, appropriate coordination among the functionalized polymeric materials and enzymes of interest plays an important role in producing emerging biocatalysts with improved properties. The optimal coordination at a biological, physical, and chemical level is requisite to develop an industrial biocatalyst. Bio-catalysis has become vital aspect in pharmaceutical and chemical industries for synthesis of value-added chemicals. The present review describes the current advances in enzyme immobilization on functionalized polymers and composites. Furthermore, the applications of immobilized enzymes in various sectors including bioremediation, biosensor and biodiesel are also discussed.

Laccases and Tyrosinases in Organic Synthesis

Laccases (Lac) and tyrosinases (TYR) are mild oxidants with a great potential in research and industry. In this work, we review recent advances in their use in organic synthesis. We summarize recent examples of Lac-catalyzed oxidation, homocoupling and heterocoupling, and TYR-catalyzed ortho-hydroxylation of phenols. We highlight the combination of Lac and TYR with other enzymes or chemical catalysts. We also point out the biological and pharmaceutical potential of the products, such as dimers of piceid, lignols, isorhamnetin, rutin, caffeic acid, 4-hydroxychalcones, thiols, hybrid antibiotics, benzimidazoles, benzothiazoles, pyrimidine derivatives, hydroxytyrosols, alkylcatechols, halocatechols, or dihydrocaffeoyl esters, etc. These products include radical scavengers; antibacterial, antiviral, and antitumor compounds; and building blocks for bioactive compounds and drugs. We summarize the available enzyme sources and discuss the scalability of their use in organic synthesis. In conclusion, we assume that the intensive use of laccases and tyrosinases in organic synthesis will yield new bioactive compounds and, in the long-term, reduce the environmental impact of industrial organic chemistry.

Nano-organic supports for enzyme immobilization: Scopes and perspectives

A variety of organic nanomaterials and organic polymers are used for enzyme immobilization to increase enzymes stability and reusability. In this study, the effects of the immobilization of enzymes on organic and organic-inorganic hybrid nano-supports are compared. Immobilization of enzymes on organic support nanomaterials was reported to significantly improve thermal, pH and storage stability, acting also as a protection against metal ions inhibitory effects. In particular, the effects of enzyme immobilization on reusability, physical, kinetic and thermodynamic parameters were considered. Due to their biocompatibility with low health risks, organic support nanomaterials represent a good choice for the immobilization of enzymes. Organic nanomaterials, and especially organic-inorganic hybrids, can significantly improve the kinetic and thermodynamic parameters of immobilized enzymes compared to macroscopic supports. Moreover, organic nanomaterials are more environment friendly for medical applications, such as prodrug carriers and biosensors. Overall, organic hybrid nanomaterials are receiving increasing attention as novel nano-supports for enzyme immobilization and will be used extensively.

Tyrosinase from Penicillium chrysogenum: Characterization and application in phenol removal from aqueous solution

The tyrosinase of Penicillium chrysogenum strain AUMC 14100 Accession No. MN219732 was purified to homogeneity and chemically modified by N-ethylmaleimide (NEM) and 5-(dimethylamino)naphthalene-1-sulfonyl chloride (dansyl chloride, DC). The inactivation of the purified enzyme obeyed pseudo-first-order reaction kinetics in the presence of NEM and DC (1-5 mM). The rate constants of the enzyme inactivation by NEM and DC were calculated to be 0.083 mol/min and 0.0013 mol/min, respectively. The recovery of enzyme activity by the protective effect of substrate indicates a non-specific modification of the active center. The order of tyrosinase inactivation kinetics and the substrate protection revealed the essentiality of sulfhydryl and lysyl residues in the enzyme active site and its role in the enzyme catalysis. The immobilized tyrosinase on alginate showed a gradual increase in residual activity over the immobilization time until the fourth hour. The desorptivity of tyrosinase was gradually raised with higher sodium dodecyl sulfate (SDS) concentrations. The immobilized enzyme retained about 70% of its original activity after 8 repeated cycles. Thus, immobilized tyrosinase of Penicillium chrysogenum removed 75% of phenol after 8 cycles and thus seems likely to be a good candidate for phenol removal in aqueous solution.

Novel Strategy of Mussel-Inspired Immobilization of Naringinase with High Activity Using a Polyethylenimine/Dopamine Co-deposition Method

Mussel-inspired surface chemistry is recognized as a simple, efficient, and mild surface modification method and has become a research hotspot in many fields. In this study, polyethylenimine/dopamine was coated on the surface of SBA-15 using a co-deposition method, making it possible to immobilize naringinase with high activity and operation stability. The optimal modification and immobilization conditions as well as enzyme properties were investigated. The naringinase activity can reach up to 753.78 U/g carrier, which was much higher than those of the previous works. Besides, the residual naringinase activity still kept 78.91% of the initial activity after one month of storage and maintained 60.79% after 8 cycles. Therefore, the strategy of mussel-inspired enzyme immobilization could be recognized as a promising and universal enzyme immobilization method, with the advantages of high relative enzyme activity, enzyme carrying rate, enzyme activity recovery rate, and good reusability and storage stability.

Process intensification using immobilized enzymes for the development of white biotechnology

Process intensification of biocatalysed reactions using different techniques such as microwaves, ultrasound, hydrodynamic cavitation, ionic liquids, microreactors and flow chemistry in various industries is critically analysed and future directions provided.

Fabrication of the robust and recyclable tyrosinase-harboring biocatalyst using ethylenediamine functionalized superparamagnetic nanoparticles: nanocarrier characterization and immobilized enzyme properties

Immobilized tyrosinase onto the functionalized nanoparticles with the ability to be reused easily in different reaction cycles to degrade phenolic compounds is known as a substantial challenge, which can be overcome through surface modification of the particles via proper chemical groups. Herein, the synthesis and silica coating of superparamagnetic nanoparticles using a simple procedure as well as their potential for tyrosinase immobilization were demonstrated. Therefore, N-[3-(trimethoxysilyl)propyl]ethylenediamine was used to functionalize the silica-coated nanoparticles with amine groups. Then, the ethylenediamine functionalized magnetic nanoparticles (EMNPs) were suspended in a solution containing tetrahydrofuran and cyanuric chloride (as an activating agent) to modify nanocarriers. To immobilize enzyme, a mixture of tyrosinase and cyanuric chloride functionalized magnetic nanoparticle (Cyc/EMNPs) was shaken at room temperature. The particles were characterized by EDX, TGA, SEM, FTIR, and TEM. As a result, the successful functionalization of the magnetic nanoparticles and covalent attachment of tyrosinase onto the Cyc/EMNPs were confirmed. The fabricated nano-biocatalyst particles were semi-spherical in shape. The immobilized tyrosinase (Ty-Cyc/EMNPs) exhibited remarkable reusability of six consecutive reaction cycles while no considerable loss of activity was observed for the first three cycles. Moreover, the excellent stability of the biocatalyst at different temperatures and pHs was proved. The Ty-Cyc/EMNPs with interesting features are promising for practical applications in biosensor development and wastewater treatment.

"Smart" chemistry and its application in peroxidase immobilization using different support materials

In the past few decades, the enzyme immobilization technology has been exploited a lot and thus became a matter of rational design. Immobilization is an alternative approach to bio-catalysis with the added benefits, adaptability to automation and high-throughput applications. Immobilization-based approaches represent simple but effective routes for engineering enzyme catalysts with higher activities than wild-type or pristine counterparts. From the chemistry viewpoint, the concept of stabilization via manipulation of functional entities, the enzyme surfaces have been an important driving force for immobilizing purposes. In addition, the unique physiochemical and structural functionalities of pristine or engineered cues, or insoluble support matrices (carrier) such as mean particle diameter, swelling behavior, mechanical strength, and compression behavior are of supreme interest and importance for the performance of the immobilized systems. Immobilization of peroxidases into/onto insoluble support matrices is advantageous for practical applications due to convenience in handling, ease separation of enzymes from a reaction mixture and the reusability. A plethora of literature is available explaining individual immobilization system. However, current literature lacks the chemistry viewpoint of immobilization. This review work presents state-of-the-art "Smart" chemistry of immobilization and novel potentialities of several materials-based cues with different geometries including microspheres, hydrogels and polymeric membranes, nanoparticles, nanofibers, composite and hybrid or blended support materials. The involvement of various functional groups including amino, thiol, carboxylic, hydroxyl, and epoxy groups via "click" chemistry, amine chemistry, thiol chemistry, carboxyl chemistry, and epoxy chemistry over the protein surfaces is discussed.

The Supramolecular Buildup of Eumelanin: Structures, Mechanisms, Controllability

Research on the supramolecular buildup of eumelanin has gained high momentum in the last years. Several new aspects regarding the involved structures and mechanisms have been established, which has led to a better understanding of the entire process. This review intends to provide a clearly laid-out summary of previous and new findings regarding structures, mechanisms, and controllability. With respect to materials applications, the aspect of controllability is of supreme importance. A focus of this review is therefore set on a novel method with high potential for specific synthesis of various, isolated particle morphologies. Finally, open questions and possibilities for their elucidation are discussed.

Bio-mimetic sensors based on molecularly imprinted membranes

An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template) was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported.