Effects of coagulant pH and ion strength on the dehydration and self-assembly of poly(N, N-dimethylamino-2-ethyl methacrylate) chains in the preparation of stimuli-responsive polyethersulfone blend membranes

Zwitterionic nanospheres engineered co-polymer composite membrane for precise protein-protein separation via dynamic self-assembly micelle deposition

The accurate protein-protein separation is important but technically challenging. Achieving such a precise separation using membrane requires the selective channels with appropriate pore geometry structure and high anti-fouling property. In this study, polyethersulfone-b-poly(sulfobetaine methyl methacrylate) (PES-b-PSBMA) was synthesized and engineered onto polysulfone (PSF) ultrafiltration (UF) membrane to fabricate zwitterionic nanospheres engineered co-polymer (ZN-e-CoP) composite membrane via dynamic self-assembly micelle deposition. On the one hand, self-assembly zwitterionic nanospheres were used as blocks to construct hydrophilic layers with size-dependent sieving channels, endowing ZN-e-CoP composite membranes with enhanced permselectivity and protein-protein separation abilities, meanwhile zwitterionic groups from nanospheres reinforced the structure stability of nanospheres/nanospheres and nanospheres/membrane via multiple intermolecular interactions. On the other hand, zwitterionic nanospheres can induce to produce the hydration layer enveloping themselves by binding water molecules, where hydration layer acts as a protective barrier on the membrane surface, impeding the protein adhesion. Hence, ZN-e-CoP_1a composite membrane exhibited superior separation properties with Lysozyme/Bovine Serum Albumin (BSA) separation factor of 18.1 and 95.4 % rejection against BSA, 10.1 and 2.3 times, respectively, higher these of pristine PSF membrane (1.8 and 42.1 %), without obviously sacrificing water flux. Simultaneously, hydration layer enables the ZN-e-CoP_1a membrane with enhanced anti-fouling performance and durability during the long-term operations. The proposed approach opens new pathways to fabricate excellent anti-fouling membranes for precise protein-protein separation.

Antifouling and Water Flux Enhancement in Polyethersulfone Ultrafiltration Membranes by Incorporating Water-Soluble Cationic Polymer of Poly [2-(Dimethyl amino) ethyl Methacrylate]

Novel ultrafiltration (UF) polymer membranes were prepared to enhance the antifouling features and filtration performance. Several ultrafiltration polymer membranes were prepared by incorporating different concentrations of water-soluble cationic poly [2-(dimethyl amino) ethyl methacrylate] (PDMAEMA) into a homogenous casting solution of polyethersulfone (PES). After adding PDMAEMA, the effects on morphology, hydrophilicity, thermal stability, mechanical strength, antifouling characteristics, and filtration performance of these altered blended membranes were investigated. It was observed that increasing the quantity of PDMAEMA in PES membranes in turn enhanced surface energy, hydrophilicity, and porosity of the membranes. These new modified PES membranes, after the addition of PDMAEMA, showed better filtration performance by having increased water flux and a higher flux recovery ratio (FRR%) when compared with neat PES membranes. For the PES/PDMAEMA membrane, pure water flux with 3.0 wt.% PDMAEMA and 0.2 MPa pressure was observed as (330.39 L·m^-2·h^-1), which is much higher than that of the neat PES membrane with the value of (163.158 L·m^-2·h^-1) under the same conditions. Furthermore, the inclusion of PDMAEMA enhanced the antifouling capabilities of PES membranes. The total fouling ratio (TFR) of the fabricated PES/PDMAEMA membranes with 3.0 wt.% PDMAEMA at 0.2 MPa applied pressure was 36 percent, compared to 64.9 percent for PES membranes.

Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Modification of Polysulfone Ultrafiltration Membranes via Addition of Anionic Polyelectrolyte Based on Acrylamide and Sodium Acrylate to the Coagulation Bath to Improve Antifouling Performance in Water Treatment

Surface modification of polysulfone ultrafiltration membranes was performed via addition of an anionic polymer flocculant based on acrylamide and sodium acrylate (PASA) to the coagulation bath upon membrane preparation by non-solvent induced phase separation (NIPS). The effect of PASA concentration in the coagulant at different coagulation bath temperatures on membrane formation time, membrane structure, surface roughness, hydrophilic-hydrophobic balance of the skin layer, surface charge, as well as separation and antifouling performance was studied. Scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, contact angle and zeta potential measurements were utilized for membrane characterization. Membrane barrier and antifouling properties were evaluated in ultrafiltration of model solutions containing human serum albumin and humic acids as well as with real surface water. PASA addition was found to affect the kinetics of phase separation leading to delayed demixing mechanism of phase separation due to the substantial increase of coagulant viscosity, which is proved by a large increase of membrane formation time. Denser and thicker skin layer is formed and formation of macrovoids in membrane matrix is suppressed. FTIR analysis confirms the immobilization of PASA macromolecules into the membrane skin layer, which yields improvement of hydrophilicity and change of zeta potential. Modified membrane demonstrated better separation and antifouling performance in the ultrafiltration of humic acid solution and surface water compared to the reference membrane.

Two-step grafting of 2-hydroxyethyl methacrylate (HEMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) onto a polyethylene plate for enhancement of Cr(VI) ion adsorption

Polyethylene (PE) plates grafted with a neutral monomer, 2-hydroxyethyl methacrylate (HEMA), and a cationic monomer, 2-(dimethylamino)ethyl methacrylate (DMAEMA), (PE-g-PHEMA)-g-PDMAEMA plates were prepared by the two-step photografting. The Cr(VI) ion adsorption behavior of the (PE-g-PHEMA)-g-PDMAEMA plates was investigated as a function of the amounts of grafted HEMA, amount of grafted DMAEMA, initial pH value, and temperature. The adsorption capacity of the DMAEMA-grafted PE (PE-g-PDMAEMA) and (PE-g-PHEMA)-g-PDMAEMA plates had the maximum value at the initial pH value of 3.0, independent of the temperature. The adsorption capacity of (PE-g-PHEMA)-g-PDMAEMA plates increased with the amount of grafted HEMA (G_HEMA) in the first-step grafting. The increase in the water absorptivity of the grafted layers and thereby the increase in the degree of protonation of dimethylamino groups on grafted PDMAEMA chains were found to lead to the increase in the adsorption capacity. This adsorption capacity was higher than or comparable to those of other polymeric adsorbents for Cr(VI) ions. The Cr(VI) ion adsorption behavior on both PE-g-DMAEMA and (PE-g-PHEMA)-g-PDMAEMA plates obeyed the mechanism of the pseudo-second-order kinetic model and was well expressed by Langmuir isotherm. The high values of the Langmuir constant suggest that the adsorption of Cr(VI) ions occurs through an electrostatic interaction between protonated dimethylamino groups on grafted PDMAEMA chains and HCrO4- ions. Cr(VI) ions were successfully desorbed from PE-g-PDMAEMA and (PE-g-PHEMA)-g-PDMAEMA plates in eluents such as NaCl, NaCl containing NaOH, NH₄Cl, NH₄Cl containing NaOH, and NaOH.

Self-Cleaning Interfaces of Polydimethylsiloxane Grafted with pH-Responsive Zwitterionic Copolymers

Self-cleaning surfaces allow the reversible attachment and detachment of microorganisms which show great promise in regards to their reusability as smart biomaterials. However, a widely used biomaterial such as polydimethylsiloxane (PDMS) suffers from high biofouling activity and hydrophobic recovery that results in decreased efficiency and stability. A current challenge is to modify and fabricate self-cleaning PDMS surfaces by incorporating antifouling and pH-sensitive properties. To address this, we synthesized a zwitterionic and pH-sensitive random poly(glycidyl methacrylate- co-sulfobetaine methacrylate- co-2-(dimethylamino)ethyl methacrylate) polymer, poly(GMA- co-SBMA- co-DMAEMA). In this work, chemical modification of PDMS was done by grafting onto poly(GMA- co-SBMA- co-DMAEMA) after surface activation via UV and ozone for 90 min to ensure the formation of covalent bonds necessary for stable grafting. The PDMS grafted with G20-S40-D40 exhibit antifouling and pH-sensitive properties by mitigating fibrinogen adsorption, blood cell adhesion, and releasing 98% adhered E. coli bacteria after immersion at basic pH. The grafting of poly(GMA- co-SBMA- co-DMAEMA) presented in this work shows attractive potential for biomedical and industrial applications as a simple, smart, and effective method for the modification of PDMS interfaces.

Surface zwitterionicalization of poly(vinylidene fluoride) membranes from the entrapped reactive core-shell silica nanoparticles

We demonstrate the preparation and properties of poly(vinylidene fluoride) (PVDF) filtration membranes modified via surface zwitterionicalization mediated by reactive core-shell silica nanoparticles (SiO2 NPs). The organic/inorganic hybrid SiO2 NPs grafted with poly(methyl meth acrylate)-block-poly(2-dimethylaminoethyl methacrylate) copolymer (PMMA-b-PDMAEMA) shell were prepared by surface-initiated reversible addition fragmentation chain transfer (SI-RAFT) polymerization and then used as a membrane-making additive of PVDF membranes. The PDMAEMA exposed on membrane surface and pore walls were quaternized into zwitterionic poly(sulfobetaine methacrylate) (PSBMA) using 1,3-propane sultone (1,3-PS) as the quaternization agent. The membrane surface chemistry and morphology were analyzed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), respectively. The hydrophilicity, permeability and antifouling ability of the investigated membranes were evaluated in detail. It was found that the PSBMA chains brought highly-hydrophilic and strong fouling resistant characteristics to PVDF membranes due to the powerful hydration of zwitterionic surface. The SiO2 cores and PMMA chains in the hybrid NPs play a role of anchors for the linking of PSBMA chains to membrane surface. Compared to the traditional strategies for membrane hydrophilic modification, the developed method in this work combined the advantages of both blending and surface reaction.

Durable antifouling polyvinylidene fluoride membrane via surface zwitterionicalization mediated by an amphiphilic copolymer

The antifouling properties of PVDF membrane were remarkably enhanced by facile incorporation of an amphiphilic triblock copolymer PDMAEMA-b-PDMS-b-PDMAEMA and subsequent surface zwitterionicalization.

A facile photopolymerization method for fabrication of pH and light dual reversible stimuli-responsive surfaces

This study proposes a simple and facile two-stage photopolymerization method for fabrication of pH and light dual reversible stimuli-responsive surfaces.