TiO2/sulfonated graphene oxide/Ag nanoparticle membrane: In situ separation and photodegradation of oil/water emulsions

Robust and stable superhydrophilic MIL-101 (Cr)-coated copper mesh for highly efficient oil/water emulsion separation

In this study, dip coating method was investigated to prepare superhydrophilic MIL-101 (Cr)-coated copper mesh for highly efficient oil/water emulsion separation. To increase the surface area of synthesized MIL-101 (Cr), a purification procedure was developed to remove unreacted H2BDC crystals present in the channel of the initial MIL-101 (Cr) sample synthesized. After that, a dispersing solution of MIL-101 (Cr) was needed to coat on the copper mesh. Thermoplastic polyurethane (TPU) was used as a binder in this procedure. The prepared membranes of M1 (once coated mesh) to M6 (six times coated mesh) were performed to separate oil/water emulsion effectively. Contact angle tests showed the superhydrophilic/underwater superoleophobic wettability behavior of MIL-101 (Cr)-coated copper meshes. The wetting mechanism of the prepared membranes is mostly relevant to the surface functional groups of purified MIL-101 (Cr). Also, the roughness of the nanostructured coated membranes was improved because of the uniform coating of MIL-101 (Cr) which is integrated into hydrophilic TPU. Oil/water separation results showed that M2 (twice coated mesh) showed the maximum amount of water flux (83076 L m-2 h-1) in oil/water separation and M3 (three times coated mesh) had the best performance of oil/water emulsion with 99.99% separation efficiency.

Superb microplastics separation performance of graphene oxide tuned by laser bombardment

Microplastics have been identified as a significant environmental threat to aquatic ecosystems and human health. Consequently, there is an urgent need for efficient separation methods for small-sized MPs. In this study, a super-hydrophilic graphene oxide (GO) membrane is successfully prepared by facilely depositing GO on a microfiltration substrate, without introducing any surface modification materials, especially nanoparticles, which may cause secondary pollution. Laser bombardment reduces GO lamellar size (23.6% of its original size) and creates an abundance of defects and undulating wrinkles, enabling the deposited GO membrane to have more and shorter pathways for water. As a result, the filtration permeance for 10 μm polyvinyl chloride reaches up to 3396 L m-2 h-1 bar-1, a 1-2-order-of-magnitude enhancement compared to the unirradiated GO membrane, and is also superior to most nanoparticle-modified GO membranes. Simultaneously, the labyrinth structure endows the membrane with a high filtration efficiency of approximately 99% for the majority of MPs. This excellent performance remains virtually unchanged after repeated use. The integration of outstanding separation effects and health safety presents opportunities for practical applications in long-term MP-in-water separation.

Transition metal compounds: From properties, applications to wettability regulation

Transition metal compounds (TMCs) have the advantages of abundant reserves, low cost, non-toxic and pollution-free, and have attracted wide attention in recent years. With the development of two-dimensional layered materials, a new two-dimensional transition metal carbonitride (MXene) has attracted extensive attention due to its excellent physicochemical properties such as gas selectivity, photocatalytic properties, electromagnetic interference shielding and photothermal properties. They are widely used in gas sensors, oil/water separation, wastewater and waste-oil treatment, cancer treatment, seawater desalination, strain sensors, medical materials and some energy storage materials. In this view, we aim to emphatically summarize MXene with their properties, applications and their wettability regulation in different applications. In addition, the properties of transition metal oxides (TMOs) and other TMCs and their wettability regulation applications are also discussed.

Effect of Thermally Reduced Graphene on the Characteristics and Performance of Polysulfone Mixed Matrix Ultrafiltration Membranes

Ultrafiltration (UF) polymeric membranes are widely used in water treatment and support desalination and gas separation membranes. In this article, we enhance the performance of Polysulfone (PSF) mixed matrix membranes (MMMs) by dispersing different concentrations of thermally reduced graphene (TRG) nanofillers. The UF PSF-TRG MMMs were fabricated via the phase inversion process, and the impact of TRG loading on the characteristics of the membrane, including hydrophilicity, porosity, roughness, and morphology, were analyzed using a contact angle measurement, atomic force microscopy (AFM), scanning electron microscopy (SEM), and dynamic mechanical analysis. Incorporating TRG into the PSF matrix led to favorable effects in the instantaneous de-mixing during phase inversion, increasing the porosity and hydrophilicity of MMMs and improving the mechanical properties of the membranes. Moreover, membrane performance was examined to remove dispersed oil from oil-water emulsion and support air-dehumidification membranes. MMM performance in terms of flux and oil rejection was superior to the control PSF membrane. Incorporating 0.25% TRG into PSF resulted in a 70% water flux increase and higher oil rejection compared to the control PSF membrane. As a support for air-dehumidification membranes, the MMM also demonstrated enhanced humidity reduction and an over 20% increase in water vapor permeance over the control PSF membrane. These results indicate that the PSF-TRG MMMs are an excellent candidate for reliable oil-water separation and as a support for air-dehumidification membranes.

Blow-Spun Nanofibrous Membrane for Simultaneous Treatment of Emulsified Oil/Water Mixtures, Dyes, and Bacteria

Membrane separation is of great significance due to its unique performance in treating wastewater. However, the simultaneous treatment of oily emulsions and other complex pollutants in water remains challenging. Herein, we have proposed a simple strategy to prepare a multifunctional titanium dioxide/silver nanoparticles/polyacrylonitrile (TiO₂/AgNPs/PAN) nanofibrous membrane. The experimental results showed that the combination of the hierarchical structure composed of PAN nanofibers and Ag/TiO₂ nanoprotrusions contributed to the superhydrophilicity and superoleophobicity (UOCA = 153.3 ± 2.0°). Further, the nanofibrous membrane exhibited a rapid gravity-driven permeate flux (>1829.37 ± 83.51 L m^-2 h^-1) and an ultrahigh separation efficiency (>99.9%) for the surfactant-stabilized oil/water emulsions. Moreover, due to the synergistic effect between the PAN fibers and TiO₂/Ag heterojunction, Rhodamine B dye in water can be removed quickly and efficiently (up to 97.67% in 90 min). More importantly, the obtained nanofibrous membrane exhibited ultrahigh stability in different harsh environments. The design of superoleophobic nanofiber membrane with a high separation efficiency and high photocatalytic activity has great potential for practical applications in the purification of oily wastewater.

GO/TiO2-Related Nanocomposites as Photocatalysts for Pollutant Removal in Wastewater Treatment

Water pollution has been a prevalent issue globally for some time. Some pollutants are released into the water system without treatment, making the water not suitable for consumption. This problem may lead to more grave problems in the future including the destruction of the ecosystem along with the organisms inhabiting it, and illness and diseases endangering human health. Conventional methods have been implemented to remove hazardous pollutants such as dyes, heavy metals, and oil but are incapable of doing so due to economic restraints and the inability to degrade the pollutants, leading to secondary pollution. Photocatalysis is a more recently applied concept and is proven to be able to completely remove and degrade pollutants into simpler organic compounds. Titanium dioxide (TiO₂) is a fine example of a photocatalyst owing to its cost-effectiveness and superb efficiency. However, issues such as the high recombination rate of photogenerated electrons along with positive holes while being only limited to UV irradiation need to be addressed. Carbonaceous materials such as graphene oxide (GO) can overcome such issues by reducing the recombination rate and providing a platform for adsorption accompanied by photocatalytic degradation of TiO₂. The history and development of the synthesis of GO will be discussed, followed by the methods used for GO/TiO₂ synthesis. The hybrid of GO/TiO₂ as a photocatalyst has received some attention in the application of wastewater treatment due to its efficiency and it being environmentally benign. This review paper thereby aims to identify the origins of different pollutants followed by the sickness they may potentially inflict. Recent findings, including that GO/TiO₂-related nanocomposites can remove pollutants from the water system, and on the photodegradation mechanism for pollutants including aromatic dyes, heavy metal and crude oil, will be briefly discussed in this review. Moreover, several crucial factors that affect the performance of photocatalysis in pollutant removal will be discussed as well. Therefore, this paper presents a critical review of recent achievements in the use of GO/TiO₂-related nanocomposites and photocatalysis for removing various pollutants in wastewater treatment.

Purifying water with silver nanoparticles (AgNPs)-incorporated membranes: Recent advancements and critical challenges

In the face of the growing global water crisis, membrane technology is a promising means of purifying water and wastewater. Silver nanoparticles (AgNPs) have been widely used to improve membrane performance, for antibiofouling, and to aid in photocatalytic degradation, thermal response, and electro-conductivity. However, several critical issues such as short antimicrobial periods, trade-off effects and silver inactivation seriously restrict the engineering application of AgNPs-incorporated membranes. In addition, there is controversy around the use of AgNPs given the toxic preparation process and environmental/biological risks. Hence, it is of great significance to summarize and analyze the recent developments and critical challenges in the use of AgNPs-incorporated membranes in water and wastewater treatment, and to propose potential solutions. We reviewed the different properties and functions of AgNPs and their corresponding applications in AgNPs-incorporated membranes. Recently, multifunctional, novel AgNP-incorporated membranes combined with other functional materials have been developed with high-performance. We further clarified the synergistic mechanisms between AgNPs and these novel nanomaterials and/or polymers, and elucidated their functions and roles in membrane separation. Finally, the critical challenges of AgNPs-incorporated membranes and the proposed solutions were outlined: i) Prolonging the antimicrobial cycle through long-term and controlled AgNPs release; ii) Overcoming the trade-off effect and organic fouling of the AgNPs-incorporated membranes; iii) Preparation of sustainable AgNPs-incorporated membranes; iv) Addressing biotoxicity induced by AgNPs; and v) Deactivation of AgNPs-incorporated membrane. Overall, this review provides a comprehensive discussion of the advancements and challenges of AgNPs-incorporated membranes and guides the development of more robust, multi-functional and sustainable AgNPs-incorporated membranes.

Evaluation of the self-assembled functional PPFS-P-AM composite for treating oilfield sewage

Oilfield sewage has a complex composition with large amounts of emulsified oils, polymers and surfactants. Efficient coagulants are required to purify such sewage to meet emissions standards. In this study, oxidized FeSO₄·7H₂O and NaHCO₃were condensed by basic titration and polyferric sulfate phosphate (PPFS) was prepared by the addition of NaH₂PO₄·2H₂O to improve its charge and stability. In addition, by adding modified palygorskite and cationic amylum, a functional polyferric sulfate phosphate, palygorskite and cationic amylum copolymer (PPFS-P-AM) composite coagulant was synthesized through self-assembly, and then used to treat oilfield sewage. The characteristic functional groups and crystal forms of the coagulant were characterized by FTIR and XRD. The zeta potential and radius of gyration (R_h) indicate that the introduction of palygorskite and cationic amylum enhance the charge neutralization and bridging adsorption abilities, respectively. The optimal dosage of cationic amylum is 5% in 80 mg·L^-1 PPFS-P-AM, which provides turbidity and oil removal rates of 98% and 94%, respectively. Observation by SEM shows that the micro-morphology of PPFS-P-AM flocs has adendritic distribution with a reticular macromolecular structure that provides good sweeping performance during the sedimentation process. Finally, an analysis of its properties and performance reveals the mechanism by which PPFS-P-AM coagulates oilfield sewage. PPFS-P-AM provides better coagulation than the other studied coagulants via the synergistic effects of reinforced charge neutralization, bridging adsorption and sweeping.

Poly(ethylene-co-vinyl alcohol) Electrospun Nanofiber Membranes for Gravity-Driven Oil/Water Separation

Fabrication of highly efficient oil/water separation membranes is attractive and challenging work for the actual application of the membranes in the treatment of oily wastewater and cleaning up oil spills/oil leakage accidents. In this study, hydrophilic poly(ethylene-co-polyvinyl alcohol) (EVOH) nanofiber membranes were made using an electrospinning technique for oil/water separation. The as-prepared EVOH electrospun nanofiber membranes (ENMs) exhibited a super-hydrophilic property (water contact angle 33.74°) without further treatment. As prepared, ENMs can provide continuous separation of surfactant-free and surfactant-stabilized water-in-oil emulsions with high efficiency (i.e., flux 8200 L m−2 h−1 (LMH), separation efficiency: >99.9%). In addition, their high stability (i.e., reusable, mechanically robust) would broaden the conditions under which they can be employed in the real field oil/water separation applications. Various characterization techniques (including morphology investigation, pore size, porosity, mechanical properties, and performance test) for gravity-driven oil/water separation were employed to evaluate the newly prepared EVOH ENMs.

Recent Developments and Advancements in Graphene-Based Technologies for Oil Spill Cleanup and Oil-Water Separation Processes

The vast demand for petroleum industry products led to the increased production of oily wastewaters and has led to many possible separation technologies. In addition to production-related oily wastewater, direct oil spills are associated with detrimental effects on the local ecosystems. Accordingly, this review paper aims to tackle the oil spill cleanup issue as well as water separation by providing a wide range of graphene-based technologies. These include graphene-based membranes; graphene sponges; graphene-decorated meshes; graphene hydrogels; graphene aerogels; graphene foam; and graphene-coated cotton. Sponges and aerogels modified by graphene and reduced graphene oxide demonstrated effective oil water separation owing to their superhydrophobic/superoleophilic properties. In addition, oil particles are intercepted while allowing water molecules to penetrate the graphene-oxide-coated metal meshes and membranes thanks to their superhydrophilic/underwater superoleophobic properties. Finally, we offer future perspectives on oil water separation that are hindering the advancements of such technologies and their large-scale applications.

Graphene coupled TiO2 photocatalysts for environmental applications: A review

Nanostructured photocatalysts have always offered opportunities to solve issues concerned with the environmental challenges caused by rapid urbanization and industrialization. These materials, due to their tunable physicochemical characteristics, are capable of providing a clean and sustainable ecosystem to humanity. One of the current thriving research focuses of visible-light-driven photocatalysts is on the nanocomposites of titanium dioxide (TiO₂) with carbon nanostructures, especially graphene. Coupling TiO₂ with graphene has proven more active by photocatalysis than TiO₂ alone. It is generally considered that graphene sheets act as an electron acceptor facilitating the transfer and separation of photogenerated electrons during TiO₂ excitation, thereby reducing electron-hole recombination. This study briefly reviews the fundamental mechanism and interfacial charge-transfer dynamics in TiO₂/graphene nanocomposites. Design strategies of various graphene-based hybrids are highlighted along with some specialized synthetic routes adopted to attain preferred properties. Importantly, the enhancing interfacial charge transfer of photogenerated e¯_CB through the graphene layers by morphology orientation of TiO₂, predominated exposure of their high energy crystal facets, defect engineering, enhancing catalytic sites in graphene, constructing dedicated architectures, tuning the nanomaterial dimensionality at the interface, and employing the synergism adopted through various modifications, are systematically compiled. Portraying the significance of these photocatalytic hybrids in environmental remediation, important applications including air and water purification, self-cleaning surfaces, H₂ production, and CO₂ reduction to desired fuels, are addressed.

pH-Sensitive Membranes with Smart Cleaning Capability for Efficient Emulsion Separation and Pollutant Removal

Since anionic dyes and surfactants abundantly exist in oily wastewater, both the separation of oil/water mixture and removal of low-molecular-weight pollutants are important to realize the advanced purification of water. By grafting poly(2-dimethylaminoethyl methacrylate) (pDMAEMA) onto polyethylene (PP) membrane via ultraviolet (UV)-initiated polymerization, the obtained PP-g-pDMAEMA membrane presented positively in water and negatively in an alkaline buffer (pH 9.0), respectively. Due to the switchable surface charge, the membrane had high emulsion separation efficiency and flux recovery ratio (approximately 100%). Besides, the dye (reactive black 5, RB-5) adsorption capacity reached 140 mg/m² in water, and approximately 90% RB-5 could be released in pH 9.0. The anionic surfactant (sodium dodecyl benzene sulfonate, SDBS) was also reversely interpreted and released by the membrane via manipulating the ambient pH. The membrane constructed in this study is supposed to realize emulsion separation with smart cleaning capability, as well as the removal of dyes and surfactants, which could be utilized for multifunctional water purification.

Cone-shaped titanate immobilized on polyacrylonitrile nanofibers: hierarchical architecture for effective photocatalytic activity

A new photocatalytic composite material, based on flexible functional polyacrylonitrile nanofibers (denoted as f-PAN NF), was developed by depositing composite layers of α-TiO₂ and cone-shaped titanate (H₂Ti₅O₁₁·3H₂O) successively. The α-TiO₂ coated on f-PAN NF as a seed accelerated the nucleation of titanate. Cone-shaped titanate deposited on α-TiO₂@f-PAN NF tightly at 35 °C with the assistance of cyanuric acid via Ostwald ripening. Due to the uniform distribution of cone-shaped titanate, the photocatalytic performance of hybrid f-PAN NF was remarkable under LED light irradiation and yielded additional photocatalytic applications as well. In addition, the composite photocatalyst exhibited better reusability and retrievability because of the special design involving a bonding between the nanofibers and layers.

Facile synthesis of rGO-MoS2-Ag nanocomposites with long-term antimicrobial activities

The abuse of antibiotics has led to the emergence of numerous super resistant bacteria, which pose a serious threat to public health. Developing nanomaterials with novel modes of bactericidal activity offers the promise of fighting pathogens without the risk of causing drug resistances. Here, we used reduced graphene oxide (rGO), bulk molybdenum disulfide (MoS₂) and silver nitrate (AgNO₃) to synthesize a ternary nanocomposite, rGO-MoS₂-Ag, via a simple one-pot method. The resulting rGO-MoS₂-Ag presented as crumpled and sheet-like structures decorated with Ag nanoparticles. The minimum inhibitory concentration and minimum bactericidal concentration of rGO-MoS₂-Ag against Escherichia coli were 50 and 100 μg ml^-1, while Staphylococcus aureus reacted only to twice higher concentrations of 100 and 200 μg ml^-1, respectively. Notably, rGO-MoS₂-Ag exhibited better antibacterial activity towards E. coli and S. aureus than rGO, MoS₂, or rGO-MoS₂. This result can be attributed to the excellent performance of rGO-MoS₂-Ag in destroying the bacterial cell membrane and inducing the generation of reactive oxygen species. The Ag⁺ ion release of rGO-MoS₂-Ag was delayed, endowing the nanocomposite with long-term antibacterial capabilities and better biosafety. Our results indicate that the as-prepared rGO-MoS₂-Ag has promising potential for application in biomedicine and public health.

Controllable synthesis of in situ grown titanate hierarchical microspheres and subsequent chemical modifications for superhydrophobic and oil-water separation properties

Sodium titanate nanowire-assembled microspheres on titanium mesh have been synthesized through controlling an over the surface acidification and hydrothermal process in terms of a proposed in situ "nucleation-cum-growth" solution chemistry strategy. These directly grown microspheres crystallize in an orthorhombic lepidocrocite layered structure of sodium titanate with the composition of Na1.8Ti1.95□0.05O4.8 (□ ∼ vacancy) determined by the XRD, Raman and SEM-EDX techniques. An individual microsphere has a uniform size of around 10 microns while the constituent nanowires have a diameter of 100 nm growing along the [110] orientation. Owing to the specially well-defined hierarchical structure and robust in situ interfaces, these titanate nanowire-assembled microspheres, after 2,2,3,3,4,4,5,5-octafluoro-1-pentanol (OFP) surface modification, could achieve superhydrophobicity. This work demonstrates an in situ "nucleation-cum-growth" synthesis strategy and facile functionalization towards superhydrophobicity for oil-water separation, which might extend to a broad variety of oxide nanowire systems to fabricate well-defined structures for wettability tailoring and multi-functional applications.

Highly flexible and stable carbon nitride/cellulose acetate porous films with enhanced photocatalytic activity for contaminants removal from wastewater

This study describes the successful fabrication of flexible photocatalytic films to remove contaminants from wastewater, the film is comprising sulfuric acid treated graphitic carbon nitride (SA-g-C₃N₄) embedded within a porous cellulose network (denoted here as CN/CA films). The SA-g-C₃N₄ content in the films was varied from 0 to 50 wt.%. The sulfuric acid treatment introduced carboxyl and sulfonyl groups on the surface of g-C₃N₄, which resulted in strong hydrogen bonding with the hydroxyl groups of cellulose acetate (so strong the partial delimination of the SA-g-C₃N₄ occurred on CN/CA film formation via solvent casting). The obtained films were around 10 μm in thickness, extremely flexible and durable, with the SA-g-C₃N₄ uniformly distributed throughout the cellulose acetate network. The CN/CA films showed excellent activities for aqueous dye degradation under direct sunlight, as well as outstanding performance for photocatalytic reduction of Cr (VI). The photocatalytic activity of the CN/CA films at the optimum SA-g-C₃N₄ content of 50 wt.% was far higher than that of pristine SA-g-C₃N₄, highlighting a main advantage of the composite film fabrication strategy introduced here. Further, the CN/CA films showed excellent stability and reusability, with no loss in activity seen over 5 cycles of dye degradation.

A Sm-MOF/GO nanocomposite membrane for efficient organic dye removal from wastewater

The instability of graphene oxide (GO) membranes in aqueous solutions restricts their application in wastewater treatment through the membrane separation technology. In this work, a nanocomposite membrane (Sm-MOF/GO) composed of samarium metal–organic frameworks (Sm-MOFs) and GO nanosheets was successfully fabricated via the filtration of the corresponding Sm-MOF/GO dispersions. The in situ growth of Sm-MOF with aqueous stability on the GO sheets prevented the adjacent GO layers from expanding in aqueous solutions, thus endowing the prepared Sm-MOF/GO membrane with a stable membrane skeleton structure. Besides, the successful loading of Sm-MOF enlarged the layer space of the composite membrane, which was beneficial for higher permeance. The optimization of the Sm-MOF loading contents was also investigated to prepare M-X (where X represents the mass ratio of the MOF raw material to the total mass of the reactants). Subsequently, the fabricated M-0.31 possessed a high permeance of 26 L m⁻² h⁻¹ bar⁻¹, which was 3 times higher than that of a pure GO membrane; moreover, high rejections (>91%) to rhodamine B and methylene blue were obtained. After continuous 5.5 h filtration, the excellent rejection was still maintained as expected, indicating the long-term stability of M-0.31.

A nanocomposite membrane composed of samarium metal-organic frameworks and graphene oxide nanosheets was fabricated for organic dye removal.

Highly Efficient Purification of Multicomponent Wastewater by Electrospinning Kidney-Bean-Skin-like Porous H-PPAN/rGO-g-PAO@Ag+/Ag Composite Nanofibrous Membranes

Due to the complexity of harmful wastewater components, environmental and multifunctional materials are required for sewage purification. In this paper, a novel kidney-bean-skin-like hydrophilic porous polyacrylonitrile/reduced graphene oxide-g-poly(amidoxime)-loaded Ag⁺ (H-PPAN/rGO-g-PAO@Ag⁺/Ag) composite nanofiber membrane was fabricated by combining electrospinning and hydrolysis methods. The spinning solution was pumped at a rate of 0.4 mL/h with the voltage set at a constant value of 23 kV. Then, some of the -CN groups switched to hydrophilic -COOH groups via a hydrolysis method, which acts as a linker of GO-g-PAN, Ag⁺, and the polyacrylonitrile (PAN) matrix. A further step of chelation and thermal treatment were used for generating Schottky junctions between rGO-g-PAO@Ag⁺ and Ag. After five-cycle tests, it exhibited outstanding mechanical properties ensuring the filtration and purification performance of the H-PPAN/rGO-g-PAO@Ag⁺/Ag composite nanofiber membrane (i.e., the tensile strength was still 7.21 MPa, and the elongation was 61.53%) for simulated wastewater. The methods of thermal treatment and high-pressure Hg lamp irradiation promoted the reduction of GO to rGO and Ag⁺ to Ag particles, which endows the final product H-PPAN/rGO-g-PAO@Ag⁺/Ag with excellent photocatalytic and bactericidal properties. Its catalytic efficiency for dyes benzoic acid (BA), Rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) was up to 99.8, 98, 95, and 91%. The antibacterial rate was 100% against Escherichia coli and 99% against Staphylococcus aureus. More importantly, the photocatalytic and antibacterial PAN-based nanofiber membrane can be simply scaled up, which provides the membrane with great potential in highly efficient wastewater treatment and augmenting water supply.

An oil/water separation nanofibrous membrane with a 3-D structure from the blending of PES and SPEEK

A new nanofibrous membrane (NFM) was prepared by blending polyethersulfone (PES) and sulfonated poly(ether ether ketone) (SPEEK) via electrospinning. The membrane exhibits good thermal stability and high mechanical strength. The hydrophilicity of the membrane could be controlled by adjusting the mass ratio of PES to SPEEK. PES acts as the backbone fiber and provides high mechanical strength, while SPEEK provides hydrophilic functional groups due to the strong hydrophilicity of the sulfonic group. The test results show that the composite NFM integrates the advantages of the two polymers. Simple adjustment of the weight ratios of the two polymers can enable an adjustable flux so that the membrane can be used for different kinds of oil/water separation. The results show that NFMs can not only separate immiscible oil/water systems but also separate oil-in-water emulsions. The immiscible oil/water separation process was driven only by gravity and had a high flux of 1119.63 Lm−2 h−1. This separation process conserves energy, which is beneficial for environmental protection. The separation flux of the oil-in-water emulsion was 758.71 Lm−2 h−1 bar−1 based on measurements under different pressures, and the separation purity total organic carbon was below 50 ppm. This work indicates that a membrane comprised of PES and SPEEK has excellent performance and can be used in different fields.

Novel magnetic Fe3O4@rGO@ZnO onion-like microspheres decorated with Ag nanoparticles for the efficient photocatalytic oxidation of metformin: toxicity evaluation and insights into the mechanisms

Emerging water contaminants, including pharmaceutical and personal care products, have become a major concern in water pollution, and several efforts have been made for the efficient removal of these contaminants.

Novel Polymer Material for Efficiently Removing Methylene Blue, Cu(II) and Emulsified Oil Droplets from Water Simultaneously

The pollution of water resources has become a worldwide concern. The primary pollutants including insoluble oil, toxic dyes, and heavy metal ions. Herein, we report a polymer adsorbent, named SPCT, to remove the above three contaminants from water simultaneously. The preparation process of SPCT contains two steps. Firstly, a hydrogel composed of sulfonated phenolic resin (SMP) and polyethyleneimine (PEI) was synthesized using glutaraldehyde (GA) as the crosslinking agent, and the product was named SPG. Then SPCT was prepared by the reaction between SPG and citric acid (CA) at 170 °C. SPCT exhibited an excellent performance for the removal of methylene blue (MB) and Cu(II) from aqueous solution. For a solution with a pollutant concentration of 50 mg L⁻¹, a removal efficiency of above 90% could be obtained with a SPCT dosage of 0.2 g L⁻¹ for MB, or a SPCT dosage of 0.5 g L⁻¹ for Cu(II), respectively. SPCT also presented an interesting wettability. In air, it was both superhydrophilic and superoleophilic, and it was superoleophobic underwater. Therefore, SPCT could successfully separate oil-in-water emulsion with high separation efficiency and resistance to oil fouling. Additionally, SPCT was easily regenerated by using dilute HCl solution as an eluent. The outstanding performance of SPCT and the efficient, cost-effective preparation process highlight its potential for practical applications.

Effective treatment of emulsified oil wastewater by the coagulation–flotation process

Ship emulsified oil wastewater was used as the research object in this study. The highly efficient coagulant demulsification degreasing mechanism and microbubble flotation technology were combined and the effects of coagulant type and dosage amount on the demulsification of emulsified oil wastewater were evaluated. The influence of the mixed coagulation effect of pH values, temperature, and hydraulic condition parameters were determined and water intake, air intake, and oil content were regulated. The coagulant for the demulsification of emulsified oil wastewater was screened; the dosage was 500 mg L⁻¹, and the removal capacity of the coagulant was in the following order: polyaluminum ferric chloride (PAFC) > polyaluminum chloride (PAC) > polysilicate aluminum ferric sulfate (PSAFS) > alum > Al₂(SO₄)₃ > polyferric sulfate > FeCl₃. Polyacrylamide (PAM) with added water was used to further reduce the oil content. The PAFC, PAC, and PSAFS were selected as coagulation–air flotation dynamic test alternative agents. The investment quantities of PAFC, PSAFS and PAM were 300 mg L⁻¹, 300 mg L⁻¹ and 30 mg L⁻¹, respectively. The stirring time was 5 min, the pH value was 6.5–6.9, the flow rate was 0.25 m³ h⁻¹, the oil content of the emulsified oil wastewater was 3000–5000 mg L⁻¹ and the effluent oil was stable below 15 ppm. The microbubble generation device using air flotation effluent was used in the two air flotation treatments to enhance the device efficiency. The air flotation device adopted the structural design of the upper part of the water inlet and the lower part of the micro-air bubble, which can increase the collision probability of the microbubble and improve the efficiency of oil removal.

Ship emulsified oil wastewater was used as the research object in this study.