Mid-block quaternized polystyrene-b-polybutadiene-b-polystyrene triblock copolymers as anion exchange membranes

Anion Exchange Membranes Based on Bis-Imidazolium and Imidazolium-Functionalized Poly(phenylene oxide) for Vanadium Redox Flow Battery Applications

Although the Nafion membrane has a high energy efficiency, long service life, and operational flexibility when applied for vanadium redox flow battery (VRFB) applications, its applications are limited due to its high vanadium permeability. In this study, anion exchange membranes (AEMs) based on poly(phenylene oxide) (PPO) with imidazolium and bis-imidazolium cations were prepared and used in VRFBs. PPO with long-pendant alkyl-side-chain bis-imidazolium cations (BImPPO) exhibits higher conductivity than the imidazolium-functionalized PPO with short chains (ImPPO). ImPPO and BImPPO have a lower vanadium permeability (3.2 × 10^-9 and 2.9 × 10^-9 cm² s^-1) than Nafion 212 (8.8 × 10^-9 cm² s^-1) because the imidazolium cations are susceptible to the Donnan effect. Furthermore, under the current density of 140 mA cm^-2, the VRFBs assembled with ImPPO- and BImPPO-based AEMs exhibited a Coulombic efficiency of 98.5% and 99.8%, respectively, both of which were higher than that of the Nafion212 membrane (95.8%). Bis-imidazolium cations with long-pendant alkyl side chains contribute to hydrophilic/hydrophobic phase separation in the membranes, thus improving the conductivity of membranes and the performance of VRFBs. The VRFB assembled with BImPPO exhibited a higher voltage efficiency (83.5%) at 140 mA cm^-2 than that of ImPPO (77.2%). These results of the present study suggest that the BImPPO membranes are suitable for VRFB applications.

Integrated opposite charge grafting induced ionic-junction fiber

The emergence of ionic-junction devices has attracted growing interests due to the potential of serving as signal transmission and translation media between electronic devices and biological systems using ions. Among them, fiber-shaped iontronics possesses a great advantage in implantable applications owing to the unique one-dimensional geometry. However, fabricating stable ionic-junction on curved surfaces remains a challenge. Here, we developed a polyelectrolyte based ionic-junction fiber via an integrated opposite charge grafting method capable of large-scale continuous fabrication. The ionic-junction fibers can be integrated into functions such as ionic diodes and ionic bipolar junction transistors, where rectification and switching of input signals are implemented. Moreover, synaptic functionality has also been demonstrated by utilizing the fiber memory capacitance. The connection between the ionic-junction fiber and sciatic nerves of the mouse simulating end-to-side anastomosis is further performed to realize effective nerve signal conduction, verifying the capability for next-generation artificial neural pathways in implantable bioelectronics.

Vinylbenzyl Chloride/Styrene-Grafted SBS Copolymers via TEMPO-Mediated Polymerization for the Fabrication of Anion Exchange Membranes for Water Electrolysis

In this work, a commercial SBS was functionalized with the 2,2,6,6-tetramethylpiperidin-N-oxyl stable radical (TEMPO) via free-radical activation initiated with benzoyl peroxide (BPO). The obtained macroinitiator was used to graft both vinylbenzyl chloride (VBC) and styrene/VBC random copolymer chains from SBS to create g-VBC-x and g-VBC-x-co-Sty-z graft copolymers, respectively. The controlled nature of the polymerization as well as the use of a solvent allowed us to reduce the extent of the formation of the unwanted, non-grafted (co)polymer, thereby facilitating the graft copolymer's purification. The obtained graft copolymers were used to prepare films via solution casting using chloroform. The -CH₂Cl functional groups of the VBC grafts were then quantitatively converted to -CH₂(CH₃)₃N⁺ quaternary ammonium groups via reaction with trimethylamine directly on the films, and the films, therefore, were investigated as anion exchange membranes (AEMs) for potential application in a water electrolyzer (WE). The membranes were extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. They generally presented ionic conductivity comparable to or higher than that of a commercial benchmark as well as higher water uptake and hydrogen permeability. Interestingly, the styrene/VBC-grafted copolymer was found to be more mechanically resistant than the corresponding graft copolymer not containing the styrene component. For this reason, the copolymer g-VBC-5-co-Sty-16-Q with the best balance of mechanical, water uptake, and electrochemical properties was selected for a single-cell test in an AEM-WE.

Anion-Exchange Membrane Water Electrolyzers

This Review provides an overview of the emerging concepts of catalysts, membranes, and membrane electrode assemblies (MEAs) for water electrolyzers with anion-exchange membranes (AEMs), also known as zero-gap alkaline water electrolyzers. Much of the recent progress is due to improvements in materials chemistry, MEA designs, and optimized operation conditions. Research on anion-exchange polymers (AEPs) has focused on the cationic head/backbone/side-chain structures and key properties such as ionic conductivity and alkaline stability. Several approaches, such as cross-linking, microphase, and organic/inorganic composites, have been proposed to improve the anion-exchange performance and the chemical and mechanical stability of AEMs. Numerous AEMs now exceed values of 0.1 S/cm (at 60–80 °C), although the stability specifically at temperatures exceeding 60 °C needs further enhancement. The oxygen evolution reaction (OER) is still a limiting factor. An analysis of thin-layer OER data suggests that NiFe-type catalysts have the highest activity. There is debate on the active-site mechanism of the NiFe catalysts, and their long-term stability needs to be understood. Addition of Co to NiFe increases the conductivity of these catalysts. The same analysis for the hydrogen evolution reaction (HER) shows carbon-supported Pt to be dominating, although PtNi alloys and clusters of Ni(OH)₂ on Pt show competitive activities. Recent advances in forming and embedding well-dispersed Ru nanoparticles on functionalized high-surface-area carbon supports show promising HER activities. However, the stability of these catalysts under actual AEMWE operating conditions needs to be proven. The field is advancing rapidly but could benefit through the adaptation of new in situ techniques, standardized evaluation protocols for AEMWE conditions, and innovative catalyst-structure designs. Nevertheless, single AEM water electrolyzer cells have been operated for several thousand hours at temperatures and current densities as high as 60 °C and 1 A/cm², respectively.

Translational Jump-Diffusion of Hydroxide Ion in Anion Exchange Membrane: Deciphering the Nature of Vehicular Diffusion

Earlier, ab initio and reactive force-field-based molecular dynamics (MD) simulation studies suggested an overwhelming contribution of the vehicular diffusion in the total diffusion of hydroxide ions rather than structural diffusion. But does the vehicular diffusion occur via small-step displacement? This question is important to have an understanding of the real characteristics of vehicular diffusion. To answer this question, we perform a classical molecular dynamics simulation of a system containing a hydroxide ion exchange membrane polymer and hydroxide ion at different hydration levels and temperatures using the same molecular force field (Dubey, V. Chem. Phys. Lett. 2020, 755, 137802), which successfully captured the microscopic structure and dynamics of the system. We use the translational jump-diffusion approach, used previously in supercooled water for understanding the origin of breakdown of the Stokes-Einstein relation, to calculate the jump-diffusion coefficient of hydroxide ion and water in the anion exchange membrane. We have seen a significant role of hydration level and temperature in the mechanism of vehicular diffusion. In overhydrated membrane, both hydroxide ions and water molecules diffuse via both small- and large-step displacement. With decreasing hydration level and temperature, the diffusion is increasingly governed by the jump-diffusion mechanism. The larger contribution of jump-diffusion comes from the stronger caging of the diffusing species by the solvent at lower hydration levels and temperature. These results, therefore, suggest that the hydration level and temperature of the hydroxide ion exchange membrane determine the detailed mechanism of the vehicular diffusion of hydroxide ion, especially whether the diffusion follows hydrodynamics or not.

Repurposing Mitsunobu Reactions as a Generic Approach toward Polyethylene Derivatives

Broad scope of functionality and controllable degree of functionalization are intriguing goals for the development of polar-group-functionalized polyethylene materials. Herein, we propose a generic strategy of using widely available starting materials (i.e., poly(ethylene-co-vinyl acetate), EVA) and mild Mitsunobu functionalization conditions to prepare over 30 polyethylene derivatives. No noble transition metal catalysts (e.g., Ru, Mo, Pd, etc.) or corrosive/explosive reagents (e.g., HBr, NaN₃, C₂H₄, H₂, etc.) are used in the synthesis, while functional groups such as azide, aldehyde, norbornene, and thiol can be easily installed, with tunable content as high as 18 mol %. Using this practical method, we successfully prepared polyethylene-derivatized membranes with excellent antimicrobial and fluorescent properties.

Fast Bulky Anion Conduction Enabled by Free Shuttling Phosphonium Cations

Highly conductive anion-exchange membranes (AEMs) are desirable for applications in various energy storage and conversion technologies. However, conventional AEMs with bulky HCO₃ ^- or Br^- as counterion generally exhibit low conductivity because the covalent bonding restrains the tethered cationic group's mobility and rotation. Here, we report an alternative polyrotaxane AEM with nontethered and free-shuttling phosphonium cation. As proved by temperature-dependent NMR, solid-state NMR, and molecular dynamics simulation, the phosphonium cation possesses a thermally trigged shuttling behavior, broader extension range, and greater mobility, thus accelerating the diffusion conduction of bulky anions. Owing to this striking feature, high HCO₃ ^- conductivity of 105 mS cm^-1 at 90°C was obtained at a relatively lower ion-exchange capacity of 1.17 mmol g^-1. This study provides a new concept for developing highly conductive anion-exchange membranes and will catalyze the exploration of new applications for polyrotaxanes in ion conduction processes.

Designing Highly Conductive Block Copolymer-Based Anion Exchange Membranes by Mesoscale Simulations

Hydroxide ion conductivity is a key aspect of anion exchange membranes and is mainly determined by the nanoscale membrane morphologies. Fundamental understanding of the structural and transport properties of membranes in terms of polymer architectures is crucial for future development of membrane-based applications. Using mesoscale simulations, this work predicts the mesostructure of the hydrated triblock copolymers; the designed polymers are composed of aromatic (polyphenylene oxide, PPO) or aliphatic (polystyrene-ethylene-butylene-styrene, SEBS) backbones, with cationic side chains being modified by hydrophobic or hydrophilic spacers. For PPO-based polymers, using octyl spacers creates a meshlike water network, yielding ion conductivity equal to 30.6 mS/cm at room temperature. For SEBS-based polymers, the nonmodified form is sufficient to produce ion-conducting pathways. Adding hydrophobic spacers further enhances the nanosegregation, and the membranes provide similar conductivity at a lower ion exchange capacity and water content. Adding hydrophilic spacers, however, has negative impacts on the ion transport. The side chains are in the stretched configurations, which sterically hinder the mobility of water and hydroxide ions. Such a resistance can be overcome by adapting multication side-chain designs, where large water channels are formed, yielding ion conductivity as high as 32.8 mS/cm.

De Novo Design of Covalent Organic Framework Membranes toward Ultrafast Anion Transport

The emergence of all-organic frameworks is of fundamental significance, and designing such structures for anion conduction holds great promise in energy conversion and storage applications. Herein, inspired by the efficient anion transport within organisms, a de novo design of covalent organic frameworks (COFs) toward ultrafast anion transport is demonstrated. A phase-transfer polymerization process is developed to acquire dense and ordered alignment of quaternary ammonium-functionalized side chains along the channels within the frameworks. The resultant self-standing COFs membranes exhibit one of the highest hydroxide conductivities (212 mS cm^-1 at 80 °C) among the reported anion exchange membranes. Meanwhile, it is found that shorter, more hydrophilic side chains are favorable for anion conduction. The present work highlights the prospects of all-organic framework materials as the platform building blocks in designing ion exchange membranes and ion sieving membranes.

The emerging applications of click chemistry reactions in the modification of industrial polymers

Click chemistry reactions have been applied to the modification of major industrial polymers by analysing the synthetic approaches and the resulting material properties.