Mixed matrix membranes containing well-designed composite microcapsules for CO2 separation

Micro and Nanoporous Membrane Platforms for Carbon Neutrality: Membrane Gas Separation Prospects

Recently, carbon neutrality has been promoted as a potentially practical solution to global CO2 emissions and increasing energy-consumption challenges. Many attempts have been made to remove CO2 from the environment to address climate change and rising sea levels owing to anthropogenic CO2 emissions. Herein, membrane technology is proposed as a suitable solution for carbon neutrality. This review aims to comprehensively evaluate the currently available scientific research on membranes for carbon capture, focusing on innovative microporous material membranes used for CO2 separation and considering their material, chemical, and physical characteristics and permeability factors. Membranes from such materials comprise metal-organic frameworks, zeolites, silica, porous organic frameworks, and microporous polymers. The critical obstacles related to membrane design, growth, and CO2 capture and usage processes are summarized to establish novel membranes and strategies and accelerate their scaleup.

Improved CO2/N2 separation performance of Pebax-1074 blend membranes containing poly(ethylene glycol)

Developing blend membrane material is one feasible and effective route for improving the gas separation efficiency and commercial attractiveness of membrane technologies. Here, free-standing membranes were prepared by casting method using Pebax-1074 as continuous polymer matrix and poly(ethylene glycol) (PEG) as dispersive organic fillers. The morphology, surface functional groups, microstructure and thermal stability of the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry, respectively. The effects of preparation variables including average molecular weight and dosage of PEG on the microstructure, morphology and properties of the blend membranes were investigated. In addition, the effects of operation conditions including permeation temperature and permeation pressure on the gas separation performance of the blend membranes were also examined. The results showed that the addition of PEG can obviously modify the structure-properties and significantly improve the separation performance of resultant membranes. Under the conditions of 30°C and 0.25 MPa, the optimal CO2 permeability and CO2/N2 selectivity respectively reached to 124.3Barrer and 115.8 for the blend membranes made by PEG600 with a content of 20% in Pebax-1074 matrix. In brief, the as-prepared blend membranes are proved to be promising for CO2/N2 separation application.

Study on physical properties of four pH responsive Spodoptera exigua multiple nucleopolyhedrovirus (SeMNPV) microcapsules as controlled release carriers

This study provides a promising controlled release form of nuclear polyhedrosis virus (NPV) for targeted control of lepidopteran pests. However, the application of NPV is limited due to its sensitivity to UV inactivation. This study investigated the anti-UV properties of microcapsules of SeMNPV occlusion bodies (OBs) encapsulated by calcium alginate (CA), and also the influence of the modification of CA by chitosan (CS), whey protein (WP), and polydopamine (PDA). These capsules were used to deliver, in a controlled release manner virions under alkaline pH conditions. Characterization of the structure, morphology, particle size, encapsulation efficiency, contact angle, insecticidal activity, UV resistance and in vitro release of the microcapsules was conducted. The modified microcapsules had better sphericity, and were devoid of SeMNPV OBs on the surface. The encapsulation rate was 84.76 ± 0.59%. PDA@CA-NPV had the highest wettability and the contact angle was 74.51 ± 0.53°. The 50% lethal concentration values (LC₅₀) of CA-NPV, CS@CA-NPV, WP@CA-NPV and PDA@CA-NPV were 11.5, 10.7, 10.5 and 1.2 times that of SeMNPV OBs alone. The modified microcapsules all improved the anti-UV performance of the virus, and PDA@CA-NPV was the most UV-resistant. Using qPCR, it was observed that under alkaline conditions, a large number of virions were released from PDA@CA-NPV, CA-NPV and SeMNPV OBs. Microencapsulated virus under alkaline conditions did not change the release pattern of virions.

Effect of Modifying the Membrane Surface with Microcapsules on the Flow Field for a Cross-Flow Membrane Setup: A CFD Study

In this study, the attachment of microcapsules on the membrane surface and its influence on the flow field for a cross-flow membrane setup are investigated. The microcapsules were placed on the top layer of the membrane. The overall purpose of this modification was the prevention of membrane biofouling. Therefore, in a first step, the influence of such a combination on the fluid flow was investigated using computational fluid dynamics (CFD). Here, different properties, which are discussed as indicators for biofouling in the literature, were considered. In parallel, different fixation strategies for the microcapsules were experimentally tested. Two different methods to add the microcapsules were identified and further investigated. In the first method, the microcapsules are glued to the membrane surface, whereas in the second method, the microcapsules are added during the membrane fabrication. The different membrane modifications were studied and compared using CFD. Therefore, virtual geometries mimicking the real ones were created. An idealized virtual geometry was added to the comparison. Results from the simulation were fed back to the experiments to optimize the combined membrane. For the presented setup, it is shown that the glued configuration provides a lower transmembrane pressure than the configuration where microcapsules are added during fabrication.

Aqueous One-Step Modulation for Synthesizing Monodispersed ZIF-8 Nanocrystals for Mixed-Matrix Membrane

Enhancing the monodispersity and surface properties of nanoporous zeolitic imidazolate frameworks (ZIFs) are crucial for maximizing their performance in advanced nanocomposites for separations. Herein, we developed an in situ method to synthesize monodispersed ZIF-8 nanocrystals with unique dopamine (DA) surface decoration layer (ZIF-8-DA) in an aqueous solution at room temperature. Interestingly, the in situ formation of the monodispersed ZIF-8-DA nanocrystals experiences a triple-stage crystallization process, resulting in a rhombic dodecahedron architecture, which is greatly different from the synthesis of conventional ZIF-8. The crystallinity and abundant microporosity of ZIF-8-DA nanocrystals is well maintained even with the DA surface decoration. Owing to the advanced surface compatibility and pore properties of ZIF-8-DA, ZIF-8-DA/Matrimid mixed-matrix membranes exhibit both higher gas permeability and selectivity than the pristine Matrimid polyimide membrane, which breaks out the traditional "trade-off" phenomena between permeability and selectivity.

Nanovoid Membranes Embedded with Hollow Zwitterionic Nanocapsules for a Superior Desalination Performance

In order to lower the capital and operational cost of desalination and wastewater treatment processes, nanofiltration (NF) membranes need to have a high water permeation and ionic rejection, while also maintaining a stable performance through antifouling resistance. Recently, Turing-type reaction conditions [ Science 2018, 360, 518-521] and sacrificed metal organic frame (MOF) nanoparticles [ Nat. Commun. 2018, 9, 2004] have been reported to introduce nanovoids into thin-film composite (TFC) polyamide (PA) NF membranes for an improved performance. Herein, we report a one-step fabrication of thin-film nanocomposite membranes (TFNM) with controllable nanovoids in the polyamide layer by introducing hollow zwitterionic nanocapsules (HZN_Cs) during interfacial polymerization. It was found that embedding HZN_Cs increases the membrane internal free volume, external surface area, and hydrophilicity, thus enhancing the water permeation and antifouling resistance without trading off the rejection of multivalent ions. For example, water permeation of the NF membranes embedded with about 19.0 wt % of HZN_Cs (73 L m^-2 h^-1) increased by 70% relative to the value of the control TFC NF membrane without HZN_Cs (43 L m^-2 h^-1). This increase comes while also maintaining 95% rejection of Na₂SO₄. Further, we also determined the effect of the mass loading of HZN_Cs on the top surface of the TFC NF membranes on the membrane performance. This work provided a direct and simple route to fabricate advanced desalination membranes with a superior separation performance.