Silibinin as a natural antioxidant for modifying polysulfone membranes to suppress hemodialysis-induced oxidative stress

Photo-responsive anti-fouling polyzwitterionic brushes: a mesoscopic simulation

The antifouling effects of a toothbrush-shaped photo-responsive polyzwitterionic membrane were studied via dissipative particle dynamics simulations in this work. The results reveal that the membrane modified by spiropyran methacrylate brushes displays photo-switchable and antifouling capability due to the photo-induced ring-opening reaction. Namely, surface morphology and hydrophilicity change in response to visible or UV light irradiation, which can be observed visually by protein adsorption and desorption. Further study indicates that: (1) brush-modification density can influence the structure and properties of the membrane. With low modification density, systems cannot establish an intact selective layer, which hinders the antifouling ability; as the modification density increases, the intact selective layer can be formed, which is conducive to the expression of photo-responsiveness and antifouling capability. (2) Factors of toothbrush-hair length and grafting ratio can influence the establishment of a light-responsive surface: as the grafting ratio and toothbrush-hair length increase, the light-responsive surface is gradually formed, meanwhile, the antifouling ability can be continuously reinforced under UV light irradiation. (3) As the brushes switch into a zwitterionic merocyanine state under UV exposure, the selective layer swelling becomes stronger than that with a hydrophobic spiropyran state under visible exposure. This is owing to the enhanced interaction between zwitterionic brushes and water, which is the root of the antifouling effect. The present work is expected to provide some guidelines for the design and development of novel antifouling membrane surfaces.

The novel hepatoprotective effects of silibinin-loaded nanostructured lipid carriers against diazinon-induced liver injuries in male mice

In the current study, silibinin-loaded nanostructured lipid carriers (Sili-NLCs) was synthesized, and the hepatoprotective effectiveness of Sili-NLCs against diazinon (DZN)-induced liver damage in male mice was evaluated. The emulsification-solvent evaporation technique was applied to prepare Sili-NLCs, and characterized by using particle size, zeta potential, entrapment efficacy (EE %), in vitro drug release behavior, and stability studies. In vivo, studies were done on male mice. Hepatotoxicity in male mice were induced by DZN (10 mg/kg/day, i.p.). Four groups treated with silibinin and Sili-NLCs with the same doses (100 and 200 mg/kg, p.o.). On 31th days, serum and liver tissue samples were collected. Alanine (ALT) and aspartate (AST) aminotransferase levels, oxidative stress biomarkers, inflammatory cytokines, and histopathological alterations were assessed. The Sili-NLCs particle size, zeta potential, polydispersity index (PDI), and EE % were obtained at 220.8 ± 0.86 nm, -18.7 ± 0.28 mV, 0.118 ± 0.03, and 71.83 ± 0.15%, respectively. The in vivo studies revealed that DZN significantly increased the serum levels of AST, ALT, hepatic levels of lipid peroxidation (LPO), and tumor necrosis factor-α (TNF-α), while decreased the antioxidant defense system in the mice's liver. However, Sili-NLCs was more effective than silibinin to return the aforementioned ratio toward the normal situation, and these results were well correlated with histopathological findings. Improvement of silibinin protective efficacy and oral bioavailability by using NLCs caused to Sili-NLCs can be superior to free silibinin in ameliorating DZN-induced hepatotoxicity in male mice.

Alleviation of Oxidative Stress during Hemodialysis Sessions by Hemodialysis Membrane Innovation: A Multidisciplinary Perspective

Oxidative stress is prevalent in end-stage kidney disease patients receiving chronic hemodialysis and is associated with heavy cardiovascular disease burdens and increased mortality risks. Hemoincompatible hemodialysis membranes per se contribute to the activation of oxidative reactions and the generation of oxygen free radicals. Since the early 1990s, vitamin E-coated membranes have been extensively used in hemodialysis patients to reduce oxidative stress during hemodialysis sessions. However, the beneficial effects of vitamin E-coated membranes versus unmodified synthetic membranes on long-term patient-centered outcomes, such as survival, quality of life, and prevalence of cardiovascular diseases, remain controversial. Accordingly, novel antioxidant hemodialysis membranes were prepared to replace the use of vitamin E-coated membranes despite the translational research on these membranes unfortunately coming to a standstill. In this review, we first summarize the state-of-the-art on the use of vitamin E-coated membranes in hemodialysis patients to highlight their strengths and limitations. Then, we discuss the latest advances in fabricating antioxidant hemodialysis membranes and provide perspectives to bridge knowledge gaps between laboratorial investigations and clinical practice in fabricating antioxidant hemodialysis membranes.

Poly(ionic liquid)/OPBI Composite Membrane with Excellent Chemical Stability for High-Temperature Proton Exchange Membrane

Despite the outstanding proton conductivity of phosphoric acid (PA)-doped polybenzimidazole (PBI) membranes as high-temperature proton exchange membranes (HT-PEMs), chemical stability is a critical issue for the operation life of PEM fuel cells (PEMFCs). Herein, we introduced polymerized [HVIM]H2PO4 ionic liquids (PIL) into an OPBI membrane to accelerate proton transfer and enhance the chemical stability of the membrane. Based on the regulation of the intrinsic viscosity of PIL, the entanglement between PIL chains and OPBI chains is enhanced to prevent the loss of PIL and the oxidative degradation of membrane materials. The PIL/OPBI membrane with the intrinsic viscosity of 2.34 dL·g-1 (2.34-PIL/OPBI) exhibited the highest proton conductivity of 113.9 mS·cm-1 at 180 °C, which is 3.5 times that of the original OPBI membrane. The 2.34-PIL/OPBI membrane exhibited the highest remaining weight of 92.1% under harsh conditions (3 wt% H2O2; 4 ppm Fe2+ at 80 °C) for 96 h, and a much lower attenuation amplitude than the OPBI did in mechanical strength and proton conductivity performance. Our present work demonstrates a simple and effective method for blending PIL with OPBI to enhance the chemical durability of the PA-PBI membranes as HT-PEMs.

Increased therapeutic effect of nanotized silibinin against glycation and diabetes: An in vitro and in silico-based approach

BACKGROUND

The global prevalence of diabetes has increased sharply, with the number of cases expected to rise from 424.9 million in 2017 to 628.6 million by 2045. Flavonoids are plant derived molecules with well-established antioxidant potential in addition to other therapeutic properties. Silibinin is a naturally occurring flavonoid with antioxidant and antidiabetic properties. However, its rapid metabolism and low bioavailability limit its therapeutic effects.

AIMS & OBJECTIVES

In this study, we have synthesized the nanoformulation of silibinin and compared its antiglycating and antidiabetic potential with the soluble form.

METHODOLOGY

The inhibitory effect was tested on carbohydrate-hydrolyzing enzymes as well as glycation of human serum albumin (HSA). The structural and biochemical changes in HSA were assessed by spectroscopic analyses and different assays.

KEY FINDINGS

The nanoforms were found to be better inhibitors of α-amylase and α-glucosidase compared to the bulk forms. Glycation of HSA in the presence of nano-silibinin resulted in the formation of lower level of early and advanced glycation products. This was also confirmed by spectroscopic studies and by estimating protein oxidation and free lysine residues. Molecular docking studies further supported the experimental outcomes. These results indicate that the nano form has significantly stronger antidiabetic and antiglycating effects than the bulk form. Nano-silibinin could therefore be recommended as a dietary supplement for diabetics to help control glycation and other associated complications.

Tacrine-Based Hybrids: Past, Present, and Future

Alzheimer's disease (AD) is a neurodegenerative disorder which is characterized by β-amyloid (Aβ) aggregation, τ-hyperphosphorylation, and loss of cholinergic neurons. The other important hallmarks of AD are oxidative stress, metal dyshomeostasis, inflammation, and cell cycle dysregulation. Multiple therapeutic targets may be proposed for the development of anti-AD drugs, and the "one drug-multiple targets" strategy is of current interest. Tacrine (THA) was the first clinically approved cholinesterase (ChE) inhibitor, which was withdrawn due to high hepatotoxicity. However, its high potency in ChE inhibition, low molecular weight, and simple structure make THA a promising scaffold for developing multi-target agents. In this review, we summarized THA-based hybrids published from 2006 to 2022, thus providing an overview of strategies that have been used in drug design and approaches that have resulted in significant cognitive improvements and reduced hepatotoxicity.

Recent advancement challenges with synthesis of biocompatible hemodialysis membranes

The focus of this study is to enhance the protein fouling resistance, hydrophilicity, biocompatibility, hemocompatibility and ability of the membranes and to reduce health complications like chronic pulmonary disease, peripheral vascular disease, cerebrovascular disease, and cardiovascular disease after dialysis, which are the great challenges in HD applications. In the current study, the PSF-based dialysis membranes are studied broadly. Significant consideration has also been provided to membrane characteristics (e.g., flowrate coefficient, solute clearance characteristic) and also on commercially available polysulfone HD membranes. PSF has gained a significant share in the development of HD membranes, and continuous improvements are being made in the process to make high flux PSF-based dialysis membranes with enhanced biocompatibility and improved protein resistance ability as the major issue in the development of membranes for HD application is biocompatibility. There has been a great increase in the demand for novel biocompatible membranes that offer the best performances during HD therapy, for example, low oxidative stress and low change ability of blood pressure.

Novel Pullulan/Gellan Gum Bilayer Film as a Vehicle for Silibinin-Loaded Nanocapsules in the Topical Treatment of Atopic Dermatitis

In this study a novel gellan gum/pullulan bilayer film containing silibinin-loaded nanocapsules was developed for topical treatment of atopic dermatitis (AD). The bilayer films were produced by applying a pullulan layer on a gellan gum layer incorporated with silibinin nanocapsules by two-step solvent casting method. The bilayer formation was confirmed by microscopic analysis. In vitro studies showed that pullulan imparts bioadhesitvity for the films and the presence of nanocapsules increased their occlusion factor almost 2-fold. Besides, the nano-based film presented a slow silibinin release and high affinity for cutaneous tissue. Moreover, this film presented high scavenger capacity and non-hemolytic property. In the in vivo study, interestingly, the treatments with vehicle film attenuated the scratching behavior and the ear edema in mice induced by 2,4-dinitrochlorobenzene (DNCB). However, the nano-based film containing silibinin modulated the inflammatory and oxidative parameters in a similar or more pronounced way than silibinin solution and vehicle film, as well as than hydrocortisone, a classical treatment of AD. In conclusion, these data suggest that itself gellan gum/pullulan bilayer film might attenuate the effects induced by DNCB, acting together with silibinin-loaded nanocapsules, which protected the skin from oxidative damage, improving the therapeutic effect in this AD-model.

Functionalized Hemodialysis Polysulfone Membranes with Improved Hemocompatibility

The field of membrane materials is one of the most dynamic due to the continuously changing requirements regarding the selectivity and the upgradation of the materials developed with the constantly changing needs. Two membrane processes are essential at present, not for development, but for everyday life—desalination and hemodialysis. Hemodialysis has preserved life and increased life expectancy over the past 60–70 years for tens of millions of people with chronic kidney dysfunction. In addition to the challenges related to the efficiency and separative properties of the membranes, the biggest challenge remained and still remains the assurance of hemocompatibility—not affecting the blood during its recirculation outside the body for 4 h once every two days. This review presents the latest research carried out in the field of functionalization of polysulfone membranes (the most used polymer in the preparation of membranes for hemodialysis) with the purpose of increasing the hemocompatibility and efficiency of the separation process itself with a decreasing impact on the body.

Predicting nanoemulsion formulation and studying the synergism mechanism between surfactant and cosurfactant: A combined computational and experimental approach

Nanoemulsion (NE) is a dosage form widely used in pharmaceutical, food, agrochemical, cosmetics, and personal care industries. NE systems are usually formulated through trial and error via numerous semi-empirical experiments. Moreover, the complex interaction mechanisms between the formulation surfactant and cosurfactant are difficult to understand. Dissipative particle dynamics (DPD) may be helpful in solving these formulation problems. Silibinin is a flavonolignan isolated from milk thistle, which has demonstrated antioxidant and antimicrobial effects. For this project, silibinin-loaded nanoemulsion (SBNE) was formulated by DPD, including surfactant and cosurfactant screening, pseudo-ternary phase construction, and SBNE characterization, all of which were verified by experimentation. Most importantly, this work shows that DPD can be adopted to explore the synergetic mechanisms between the surfactant and cosurfactant, including emulsification efficiency, distance, angle, arrangement, and order parameter. Additional verification experiments on the antioxidant and antimicrobial applications of simulation-designed SBNE were also carried out and confirmed DPD-predicted results. As such, predicting NE formulation by DPD has been proven to be feasible. For SBNE, the addition of PEG400 cosurfactant stretches the Cremophor RH40 surfactant molecules and assists in a more orderly arrangement. An enhanced interfacial thickness in SBNE could be attributed to the stretched hydrophilic head group and the decreased angle between the molecular axis and interface normal. These DPD and experimentally-verified results indicated that a proper cosurfactant will enhance the interfacial thickness, decrease the consumption of surfactant, and benefit NE formation. This new computationally applied knowledge should facilitate optimizing, designing, and understanding NE formulation more rationally and scientifically.

A Novel Generation of Polysulfone/Crown Ether-Functionalized Reduced Graphene Oxide Membranes with Potential Applications in Hemodialysis

Heavy metal poisoning is a rare health condition caused by the accumulation of toxic metal ions in the soft tissues of the human body that can be life threatening if left untreated. In the case of severe intoxications, hemodialysis is the most effective method for a rapid clearance of the metal ions from the bloodstream, therefore, the development of hemodialysis membranes with superior metal ions retention ability is of great research interest. In the present study, synthetic polysulfone membranes were modified with reduced graphene oxide functionalized with crown ether, an organic compound with high metal ions complexation capacity. The physico-chemical characteristics of the composite membranes were determined by FT-IR, Raman, XPS and SEM analysis while their efficiency in retaining metal ions was evaluated via ICP-MS analysis. The obtained results showed that the thermal stability of reduced graphene oxide was improved after functionalization with crown ether and that the presence of the carbonaceous filler influenced the membranes morphology in terms of pore dimensions and membrane thickness. Moreover, the ability of Cu2+ ions retention from synthetic feed solution was up to three times higher in the case of the composite membranes compared to the neat ones.

Biodegradation Process of PSF-PUR Blend Hollow Fiber Membranes Using Escherichia coli Bacteria-Evaluation of Changes in Properties and Porosity

This work was focused on biodegradation with Escherichia coli bacteria studies of PSF-PUR blend semipermeable hollow fiber membranes that possibly can undergo a partial degradation process. Hollow fiber membranes were obtained from polysulfone (PSF) and polyurethane (PUR) containing ester bonds in the polymer chain in various weight ratios using two solvents: N,N-Dimethylmethanamide (DMF) or N-Methylpyrrolidone (NMP). The membranes that underwent the biodegradation process were tested for changes in the ultrafiltration coefficient (UFC), retention and cut-off point. Moreover, the membranes were subjected to scanning electron microscopy (SEM), MeMoExplorer^TM Software and Fourier-transform infrared spectroscopy (FT-IR) analysis. The influence of E. coli and its metabolites has been proven by the increase in UFC after biodegradation and changes in the selectivity and porosity of individual membranes after the biodegradation process.

Resveratrol as a plant type antioxidant modifier for polysulfone membranes to improve hemodialysis-induced oxidative stress

Resveratrol (RES) is a plant extract with excellent antioxidant, biocompatibility, anti-inflammatory and inhibition of platelet aggregation. RES-modified polysulfone (PSF) hemodialysis membranes have been fabricated using an immersion phase transformation method. The antioxidant properties of the blend membranes were evaluated in terms of their 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS⁺), reactive oxygen species (ROS) free radicals scavenging, total antioxidant capacity (T-AOC) of serum and lipid peroxidation inhibition. The observed results of decreasing DPPH and ABTS⁺ levels, scavenging ROS, significant inhibition of lipid peroxidation and improving the T-AOC of serum all contribute to the recovery of oxidative balance and the use of RES as an antioxidant modifier. The antioxidant stability of PSF/RES blend membranes was also studied. Moreover, the results of blood compatibility experiments showed that the addition of RES improved the blood compatibility of PSF membrane, inhibited the adhesion of red blood cells and platelets; inhibited complement activation; and reduced the blood cells deformation rate. The dialysis simulation experiment indicated that PSF/RES membrane (M-3) can clear 90.33% urea, 89.50% creatinine, 74.60% lysozyme and retention 90.47% BSA. All these results showed the new PSF/RES blend membranes have potential to be used in the field of hemodialysis to improve oxidative stress status in patients.

Hierarchical Surface Architecture of Hemodialysis Membranes for Eliminating Homocysteine Based on the Multifunctional Role of Pyridoxal 5'-phosphate

Patients with end-stage renal disease are prone to developing a complication of hyperhomocysteinemia, manifesting as an elevation of the homocysteine (Hcy) concentration in human plasma. However, Hcy as a protein-bound toxin is barely removed by conventional hemodialysis membranes. Here, we report a novel hemodialysis membrane by preparing a bioactive coating of pyridoxal 5'-phosphate (PLP) and adding biocompatible hyperbranched polyglycerol (HPG) brushes to achieve Hcy removal. The dip-applied PLP coating, a coenzyme with a role in Hcy metabolism, dramatically promoted a decrease in the Hcy concentration in human plasma. Moreover, the aldehyde group of PLP had an intrinsic chemical reactivity toward the terminal amino group to immobilize the HPG brushes on the hemodialysis membrane surface. The hierarchical PLP-HPG layer-functionalized membranes had a high efficacy for eliminating Hcy, with a concentration from the initial stage of 150 μmol/L reduced to a nearly normal level of 20 μmol/L in simulated dialysis. By analyzing the impact of HPG brushes with various chain lengths, we found that HPG brushes with a medium length enabled the PLP coating with the bioactive function of Hcy conversion to additionally protect Hcy-attacked target cells by providing excellent hydrophilicity and a dense enough chain volume overlap of the hyperbranched architecture. Simultaneously, the densely packed HPG brushes generated a maximal steric and hydration barrier that significantly improved biofouling resistance against blood proteins. The optimally functionalized membranes showed a clearance of 83.1% urea and 49.6% lysozyme and a rejection of 96.0% bovine serum albumin. The diversely functionalized PLP-HPG layers demonstrate a potential route for a more integrated hemodialysis membrane that can cope with the urgent issue of hyperhomocysteinemia in clinical hemodialysis therapy.

Lignin Particles for Multifunctional Membranes, Antioxidative Microfiltration, Patterning, and 3D Structuring

We introduce a new type of particle-based membrane based on the combination of lignin particles (LPs) and cellulose nanofibrils (CNF), the latter of which are introduced in small volume fractions to act as networking and adhesive agents. The synergies that are inherent to lignin and cellulose in plants are re-engineered to render materials with low surface energy (contact angle measurements) and can be rendered water-resistant with the aid of wet-strength agents (WSAs). Importantly, they are most suitable for antioxidative separation (ABTS^•+ radical inhibition): membranes with uniform porous structures (air permeability and capillary flow porosimetry) allow effluent oxidation at 95 mL/cm², demonstrating, for the first time, the use of unmodified lignin particles in flexible membranes for active microfiltration. Moreover, the membranes are found to be nonfouling (protein adhesion and activity rate). The inherent properties of lignin, including UV radiation blocking capacity (UV transmittance analysis) and reduced surface energy, are further exploited in the development of tailorable and self-standing architectures that are almost entirely comprised of nonbonding LP (solids content as high as 92 w/w%). Despite such composition, the materials develop high toughness (oscillatory dynamic mechanical analysis), owing to the addition of minor amounts of CNF. Multifunctional materials based on thin films (casting), 3D structures (molding), and patterned geometries (extrusion deposition) are developed as a demonstration of the potential use of lignin particles as precursors of new material generation. Remarkably, our observations hold for spherical LPs since a much poorer performance was observed after using amorphous powder, indicating the role of size and shape in related applications.