Zeolitic imidazolate framework decorated on 3D nanofiber network towards superior proton conduction for proton exchange membrane

Hybrid Membrane of Sulfonated Poly(aryl ether ketone sulfone) Modified by Molybdenum Clusters with Enhanced Proton Conductivity

Developing novel proton exchange membranes (PEMs) with low cost and superior performance to replace Nafion is of great significance. Polyoxometalate-doped sulfonated poly(aryl ether ketone sulfone) (SPAEKS) allows for the amalgamation of the advantages in each constituent, thereby achieving an optimized performance for the hybrid PEMs. Herein, the hybrid membranes by introducing 2MeIm-{Mo132} into SPAEKS are obtained. Excellent hydrophilic properties of 2MeIm-{Mo132} can help more water molecules be retained in the hybrid membrane, providing abundant carriers for proton transport and proton hopping sites to build successive hydrophilic channels, thus lowering the energy barrier, accelerating the proton migration, and significantly fostering the proton conductivity of hybrid membranes. Especially, SP-2MIMo132-5 exhibits an enhanced proton conductivity of 75 mS cm-1 at 80 °C, which is 82.9% higher than pristine SPAEKS membrane. Additionally, this membrane is suitable for application in proton exchange membrane fuel cells, and a maximum power density of 266.2 mW cm-2 can be achieved at 80 °C, which far exceeds that of pristine SPAEKS membrane (54.6 mW cm-2). This work demonstrates that polyoxometalate-based clusters can serve as excellent proton conduction sites, opening up the choice of proton conduction carriers in hybrid membrane design and providing a novel idea to manufacture high-performance PEMs.

Bimetallic metal-organic framework aerogels supported by aramid nanofibers for efficient CO2 capture

The excessive CO2 emission has gained global attentions due to its potential effects on climate change, plant nutrition deterioration, and human health and safety. Metal-organic frameworks (MOFs) featured with high specific surface area, adjustable pore size, and tailorable morphology have been widely applied for CO2 capture. However, some drawbacks of poor mechanical stability and uneven distribution of mesopores limit their further applications. Herein, we demonstrate a one-step synthesis of bimetallic center framework (OSSBCF) and pore reconstruction (PRC) strategy to prepare the hierarchical porous Zn/Co-ZIF@ANF aerogels. This unique design achieves the construction of efficient gas transfer channels and creates massive micropores with abundant Lewis basic adsorption sites. Benefiting from theses merits, the bimetallic Zn/Co-ZIF@ANF aerogels demonstrate high MOFs loading mass of 47.51 wt%, high specific surface area of 686.39 m2g-1, and large porosity of 99.31 %. Moreover, the bimetallic Zn/Co-ZIF@ANF aerogels exhibit an enhanced CO2 adsorption capacity of 5.99 mmol/g and CO2/N2 adsorption selectivity of 35 at 25 °C and 1 bar. The CO2 capacity of bimetallic Zn/Co-ZIF@ANF aerogels keep up to 95.19 % after ten cycles of CO2 adsorption, indicating the excellent long-term recycle stability. Therefore, this study provides a promising strategy to engineer hierarchical porous bimetallic MOF aerogels toward practical CO2 capture.

Flexible nanofibrous membranes of dual metallic metal-organic framework with enhanced Lewis basic sites and high loading mass for efficient CO2 capture

Excessive CO2 emissions and the resultant global warming present significant environmental challenges, posing threats to human health and public safety. Metal-organic frameworks (MOFs), known for their high specific area and large porosity, hold the promise for CO2 capture. However, a major obstacle is the low loading mass of MOFs and the limited interface affinity and compatibility between MOFs and substrates. In this study, we present an electrospinning-assisted in-situ synthesis dual metallic framework strategy for preparing flexible Zn/Co-ZIF nanofibrous membranes (NFMs). This method achieves the high loading mass of MOFs and introduces abundant Lewis basic sites, thereby enhancing the CO2 adsorption. The dual metallic Zn/Co-ZIF NFMs exhibit remarkable features, including high MOF loading mass (70.23 wt%), high specific surface area (379.63 m2g-1), large porosity (92.34 %), high CO2 adsorption capacity (4.43 mmol/g), high CO2/N2 adsorption selectivity (37), and high CO2/CH4 adsorption selectivity (31). Moreover, the dual metallic Zn/Co-ZIF NFMs demonstrate robust structural stability and durability attributed to the excellent interface affinity between MOFs and NFMs, retaining 96.56 % of their initial capacity after 10 adsorption-desorption cycles. This work presents a prospective direction for developing flexible dual metallic MOF NFMs for the efficient capture of CO2.

Precise Control of the Preparation of Proton Exchange Membranes via Direct Electrostatic Deposition

In this work, we reported a novel preparation method for a proton exchange membrane (PEM) named, the direct electrostatic deposition method. In theory, any required thickness and size of PEM can be precisely controlled via this method. By direct electrostatic spraying of Nafion solution containing amino modified SiO2 nanoparticles onto a metal collector, a hybrid membrane of 30 μm thickness was fabricated. The DMFC assembled with a prepared ultrathin membrane showed a maximum power density of 124.01 mW/cm2 at 40 °C and 100% RH, which was 95.29% higher than that of Nafion. This membrane formation method provides potential benefits for the preparation of ultrathin PEMs.

In Situ Growth of COF on PAN Nanofibers to Improve Proton Conductivity and Dimensional Stability in Proton Exchange Membranes

Perfluorosulfonic acid (PFSA) polymer is considered as a proton exchange membrane material with great potential. Nevertheless, excessive water absorption caused by abundant sulfonic acid groups makes PFSA have low dimensional stabilities. In order to improve the dimensional stability of PFSA membranes, nanofibers are introduced into PFSA membranes. However, because nanofibers lack proton conducting groups, it usually reduces the proton conductivities of PFSA membranes. It is a challenge to improve dimensional stabilities while maintaining high proton conductivities. Due to the structural designability, covalent organic frameworks (COFs) with proton conductive groups are chosen to improve the overall performance of PFSA membranes. Herein, COFs synthesized in situ on three-dimensional PAN nanofibers were introduced into PFSA to prepare PFSA@PAN/TpPa-SO3H sandwiched membranes. The PFSA@PAN/TpPa-SO3H-5 composite membrane exhibited outstanding proton conductivity, which reached 260.81 mS·cm−1 at 80 °C and 100% RH, and only decreased by 4.7% in 264 h. The power density of a single fuel cell with PFSA@PAN/TpPa-SO3H-5 was as high as 392.7 mW·cm−2. Compared with the pristine PFSA membrane, the conductivity of PFSA@PAN/TpPa-SO3H-5 increased by 70.0 mS·cm−1, and the area swelling ratio decreased by 8.1%. Our work provides a novel strategy to prepare continuous proton transport channels to simultaneously improve conductivities and dimensional stabilities of proton exchange membranes.

De Novo Ion-Exchange Membranes Based on Nanofibers

The unique functions of nanofibers (NFs) are based on their nanoscale cross-section, high specific surface area, and high molecular orientation, and/or their confined polymer chains inside the fibers. The introduction of ion-exchange (IEX) groups on the surface and/or inside the NFs provides de novo ion-exchangers. In particular, the combination of large surface areas and ionizable groups in the IEX-NFs improves their performance through indices such as extremely rapid ion-exchange kinetics and high ion-exchange capacities. In reality, the membranes based on ion-exchange NFs exhibit superior properties such as high catalytic efficiency, high ion-exchange and adsorption capacities, and high ionic conductivities. The present review highlights the fundamental aspects of IEX-NFs (i.e., their unique size-dependent properties), scalable production methods, and the recent advancements in their applications in catalysis, separation/adsorption processes, and fuel cells, as well as the future perspectives and endeavors of NF-based IEMs.

Self-Standing combined covalent-organic-framework membranes for subzero conductivity assisted by ionic liquids

The development of proton-conducting materials in cold regions is still at the initial stage due to the challenge in breaking the subzero temperature limit, especially in covalent organic frameworks (COFs). Herein, we fabricated a series of proton-conductive COFs as self-standing, highly flexible combined membranes (ssc-COFMs) composed of a processable TpBD-Me₂ and a conductive Tp-TG_Cl, in-situ encapsulated proton-conducting ionic liquids (PCILs) as additional proton sources into backbones. Compositions and microstructures of ssc-COFMs are monitored by XRD, FTIR, nitrogen adsorption and elemental analysis. Comparison to other porous organic conductors, a great advance propelled renders the combined COF membranes to have a high protonic conductivities at medium and subzero temperatures (243 to 353 K), owing to the resultant multifaceted synergistic effect of multiple proton units. Specifically, the proton conductivities of the ssc-COFMs loaded with -SO₄H functionalized PCILs reaches 2.87 × 10^-4 S cm^-1 (~58% RH) and 9.93 × 10^-4 S cm^-1 (~98% RH) at 243 K, together with 6.84 × 10^-2 S·cm^-1 under 353 K and ~ 98% RH.

SO42-/SnO2 Solid Superacid Granular Stacked One-Dimensional Hollow Nanofiber for a Highly Conductive Proton-Exchange Membrane

A novel sulfated tin oxide solid superacid granular stacked one-dimensional (1D) hollow nanofiber (SO₄^2-/FSnO₂) is proposed as a nanofiller in sulfonated poly(phthalazinone ether sulfone ketone) (SPPESK) to manipulate a highly conductive proton nanochannel. It has unique microstructures with an open-end hollow nanofibric morphology and grain-stacked single-layer mesoporous fiber wall, which greatly enlarge the specific surface area and aspect ratio. The diverse acid sites, that is, SO₄^2-, Sn-OH Brönsted, and Sn⁴⁺ Lewis superacids, provide a high concentration of strong acidic proton carriers on the nanofiber surface and dynamically abundant hydrogen bonds for rapid proton transfer and interfacial interactions with -SO₃H groups in the SPPESK along the 1D hollow nanofiber. As a result, long-range orientated ionic clusters are observed in the SO₄^2-/FSnO₂ incorporated membrane, leading to simultaneous enhancement of proton conductivity (226.7 mS/cm at 80 °C), mechanical stability (31.4 MPa for the hydrated membrane), fuel permeation resistance, and single-cell performance (936.5 and 147.3 mW/cm² for H₂/O₂ and direct methanol fuel cells, respectively). The superior performance, as compared with that of the zero-dimensional nanoparticle-incorporated membrane, Nafion 115, and previously reported SPPESK-based membranes, suggests a great potential of elaborating superstructural 1D hollow nanofillers for highly conductive proton-exchange membranes.

Performance enhancement of direct methanol fuel cells using a methanol barrier boron nitride–Nafion hybrid membrane

Sulfonated hexagonal boron nitride is explored as a potential filler to prepare Nafion hybrid membranes for direct methanol fuel cell (DMFC) applications.