Novel microwave-driven synthesis of hydrophilic polyvinylidene fluoride/polyacrylic acid (PVDF/PAA) membranes and decoration with nano zero-valent-iron (nZVI) for water treatment applications

Recent Advances in Nanoscale Zero-Valent Iron (nZVI)-Based Advanced Oxidation Processes (AOPs): Applications, Mechanisms, and Future Prospects

The fast rise of organic pollution has posed severe health risks to human beings and toxic issues to ecosystems. Proper disposal toward these organic contaminants is significant to maintain a green and sustainable development. Among various techniques for environmental remediation, advanced oxidation processes (AOPs) can non-selectively oxidize and mineralize organic contaminants into CO2, H2O, and inorganic salts using free radicals that are generated from the activation of oxidants, such as persulfate, H2O2, O2, peracetic acid, periodate, percarbonate, etc., while the activation of oxidants using catalysts via Fenton-type reactions is crucial for the production of reactive oxygen species (ROS), i.e., •OH, •SO4-, •O2-, •O3CCH3, •O2CCH3, •IO3, •CO3-, and 1O2. Nanoscale zero-valent iron (nZVI), with a core of Fe0 that performs a sustained activation effect in AOPs by gradually releasing ferrous ions, has been demonstrated as a cost-effective, high reactivity, easy recovery, easy recycling, and environmentally friendly heterogeneous catalyst of AOPs. The combination of nZVI and AOPs, providing an appropriate way for the complete degradation of organic pollutants via indiscriminate oxidation of ROS, is emerging as an important technique for environmental remediation and has received considerable attention in the last decade. The following review comprises a short survey of the most recent reports in the applications of nZVI participating AOPs, their mechanisms, and future prospects. It contains six sections, an introduction into the theme, applications of persulfate, hydrogen peroxide, oxygen, and other oxidants-based AOPs catalyzed with nZVI, and conclusions about the reported research with perspectives for future developments. Elucidation of the applications and mechanisms of nZVI-based AOPs with various oxidants may not only pave the way to more affordable AOP protocols, but may also promote exploration and fabrication of more effective and sustainable nZVI materials applicable in practical applications.

Advanced Oxidation Processes Coupled to Nanofiltration Membranes with Catalytic Fe0 Nanoparticles in Symmetric and Asymmetric Polyelectrolyte Multilayers

The in situ synthesis of Fe⁰ particles using poly-(acrylic acid) (PAA) is an effective tool for fabricating catalytic membranes relevant to advanced oxidation processes (AOPs). Through their synthesis in polyelectrolyte multilayer-based nanofiltration membranes, it becomes possible to reject and degrade organic micropollutants simultaneously. In this work, we compare two approaches, where Fe⁰ nanoparticles are synthesized in or on symmetric multilayers and asymmetric multilayers. For the membrane with symmetric multilayers (4.0 bilayers of poly (diallyldimethylammonium chloride) (PDADMAC)/PAA), the in situ synthesized Fe⁰ increased its permeability from 1.77 L/m²/h/bar to 17.67 L/m²/h/bar when three Fe²⁺ binding/reducing cycles were conducted. Likely, the low chemical stability of this polyelectrolyte multilayer allows it to become damaged through the relatively harsh synthesis. However, when the in situ synthesis of Fe⁰ was performed on top of asymmetric multilayers, which consist of 7.0 bilayers of the very chemically stable combination of PDADMAC and poly(styrene sulfonate) (PSS), coated with PDADMAC/PAA multilayers, the negative effect of the Fe⁰ in situ synthesized can be mitigated, and the permeability only increased from 1.96 L/m²/h/bar to 2.38 L/m²/h/bar with three Fe²⁺ binding/reducing cycles. The obtained membranes with asymmetric polyelectrolyte multilayers exhibited an excellent naproxen treatment efficiency, with over 80% naproxen rejection on the permeate side and 25% naproxen removal on the feed solution side after 1 h. This work demonstrates the potential of especially asymmetric polyelectrolyte multilayers to be effectively combined with AOPs for the treatment of micropollutants (MPs).

Synergistic Effect of Chitosan and Metal Oxide Additives on Improving the Organic and Biofouling Resistance of Polyethersulfone Ultrafiltration Membranes

The combination of chitosan and metal oxides was utilized as an addition to improve the fouling resistance of polyethersulfone (PES) ultrafiltration membranes. Pure water flux, membrane hydrophilicity by the contact angle, scanning electron micrographs, and Fourier-transform infrared spectra were used to characterize the membranes. With the addition of metal oxides, the modified membrane's water flux increased. The PES membrane with 0.25% wt chitosan and 2.0% wt AgNO₃ had the highest flux and antibacterial activity among the membranes tested. Because of its potential to improve membrane hydrophilicity, the water flux increased with the addition of chitosan and AgNO₃. Because of the improved hydrophilicity, the contact angle reduced as chitosan and Ag loading was increased. The PES-chitosan-Ag₂O (from AgNO₃ 2.0% wt) membrane had high antibacterial activity against Escherichia coli and Staphylococcus aureus, whereas the PES-2.0% wt Ag membrane did not show the same result. Finally, the addition of chitosan in the PES-Ag membrane increased the membrane's antibacterial activity substantially.

Recent Advances in Responsive Membrane Functionalization Approaches and Applications

In recent years, significant advances have been made in the field of functionalized membranes. With the functionalization using various materials, such as polymers and enzymes, membranes can exhibit property changes in response to an environmental stimulation, such as heat, light, ionic strength, or pH. The resulting responsive nature allows for an increased breadth of membrane uses, due to the developed functionalization properties, such as smart-gating filtration for size-selective water contaminant removal, self-cleaning antifouling surfaces, increased scalability options, and highly sensitive molecular detection. In this review, new advances in both fabrication and applications of functionalized membranes are reported and summarized, including temperature-responsive, pH-responsive, light-responsive, enzyme-functionalized, and two-dimensional material-functionalized membranes. Specific emphasis was given to the most recent technological improvements, current limitations, advances in characterization techniques, and future directions for the field of functionalized membranes.

Development of Antifouling Polysulfone Membranes by Synergistic Modification with Two Different Additives in Casting Solution and Coagulation Bath: Synperonic F108 and Polyacrylic Acid

This study deals with the development of antifouling ultrafiltration membranes based on polysulfone (PSF) for wastewater treatment and the concentration and purification of hemicellulose and lignin in the pulp and paper industry. The efficient simple and reproducible technique of PSF membrane modification to increase antifouling performance by simultaneous addition of triblock copolymer polyethylene glycol-polypropylene glycol-polyethylene glycol (Synperonic F108, Mn =14 × 103 g mol-1) to the casting solution and addition of polyacrylic acid (PAA, Mn = 250 × 103 g mol-1) to the coagulation bath is proposed for the first time. The effect of the PAA concentration in the aqueous solution on the PSF/Synperonic F108 membrane structure, surface characteristics, performance, and antifouling stability was investigated. PAA concentrations were varied from 0.35 to 2.0 wt.%. Membrane composition, structure, and topology were investigated by Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and scanning electron microscopy (SEM). The addition of PAA into the coagulation bath was revealed to cause the formation of a thicker and denser selective layer with decreasing its pore size and porosity; according to the structural characterization, an interpolymer complex of the two additives was formed on the surface of the PSF membrane. Hydrophilicity of the membrane selective layer surface was shown to increase significantly. The selective layer surface charge was found to become more negative in comparison to the reference membrane. It was shown that PSF/Synperonic F108/PAA membranes are characterized by better antifouling performance in ultrafiltration of humic acid solution and thermomechanical pulp mill (ThMP) process water. Membrane modification with PAA results in higher ThMP process water flux, fouling recovery ratio, and hemicellulose and total lignin rejection compared to the reference PSF/Synperonic F108 membrane. This suggests the possibility of applying the developed membranes for hemicellulose concentration and purification.

Optimization of ozonation process for organic matter and ecotoxicity removal from landfill leachate by applying rotatable central composite design (RCCD)

Ozonation process was used for leachate treatment from a landfill located in Rio de Janeiro, Brazil. The influence of pH and ozone concentration on COD (Chemical Oxygen Demand), TOC (Total Organic Carbon), Absorbance at 254 nm (ABS254nm), and True color was evaluated through RCCD (Rotatable Central Composite Design) experimental design, resulting in mathematical models that were statistically analyzed in Statistica and Design Expert software. The removals obtained was up to 26.1%, 29.9%, 56.9%, and 97.9% for COD ([COD]₀=3,323 mg/L), TOC ([TOC]₀=1,275 mg/L), ABS254nm (ABS₀=32.2), and True color ([True color]₀=3,467 mgPt-Co/L), respectively. Statistical and variance analysis of the experimental data revealed that one quadratic model obtained in Statistica was valid, ABS254nm reduction. However, by applying the Design Expert software, modified models were generated to predict the behavior of all dependent variables. Thus, the optimum point for the best response after ozonation of the landfill leachate was at the highest pH and the lowest ozone dose (9 and 2.2 mgO₃/m³, respectively). Toxicity toward Allivibrio fischeri bacteria was abated at the same time that it decreased the impact of the effluent to Danio rerio fish (from 125 UT to 62 UT) on the treated leachate.

Dual-imprinted mixed matrix membranes for selective recognition and separation: A synergetic imprinting strategy based on complex initiation system

Molecularly imprinted membranes (MIMs) with sufficient and even-distributed recognition sites that can break the permeability-selectivity trade-off phenomenon are desirable in chemical field of selective separation. Herein graphene oxide (GO)/TiO₂-loaded nanocomposite fibrous membranes were prepared by developing two kinds of tetracycline (TC)-imprinted systems in the same MIMs-based material. Thereinto, polydopamine-based and sol-gel-based imprinting processes were applied to the synthesis of GO/TiO₂-loaded dual-imprinted mixed matrix membranes (GT-DIMs). The as-prepared GT-DIMs encompassed innovative GO/TiO₂-based nanocomposite fibrous channels and two kinds of TC-imprinted systems, and critical comparisons regarding the fluxes, rebinding capacities and permselectivity were provided and studied. Importantly, dual-imprinted system of GT-DIMs could not only allow for largely enhanced rebinding result (70.63 mg/g) and fast adsorption equilibrium rate within 30 min, but also facilitate the high permselectivity of TC in complex separation systems and lab-simulated wastewater samples. The permselectivity factors were all around 5.0, which strongly demonstrated the efficiently selective recognition and separation performance of GT-DIMs. Overall, based on testing results of practical separation and scalability, excellent structural stability and separation continuity had been successfully obtained for selective separation applications of pollutants.