Inhibition of algae-induced membrane fouling by in-situ formed hydrophilic micropillars on ultrafiltration membrane surface

Insight into key interactions between diverse factors and membrane fouling mitigation in anaerobic membrane bioreactor

Anaerobic membrane bioreactors (AnMBRs) have garnered considerable attention as a low-energy and low-carbon footprint treatment technology. With an increasing number of scholars focusing on AnMBR research, its outstanding performance in the field of water treatment has gradually become evident. However, the primary obstacle to the widespread application of AnMBR technology lies in membrane fouling, which leads to reduced membrane flux and increased energy demand. To ensure the efficient and long-term operation of AnMBRs, effective control of membrane fouling is imperative. Nevertheless, the interactions between various fouling factors are complex, making it challenging to predict the changes in membrane fouling. Therefore, a comprehensive analysis of the fouling factors in AnMBRs is necessary to establish a theoretical basis for subsequent membrane fouling control in AnMBR applications. This review aims to provide a thorough analysis of membrane fouling issues in AnMBR applications, particularly focusing on fouling factors and fouling control. By delving into the mechanisms behind membrane fouling in AnMBRs, this review offers valuable insights into mitigating membrane fouling, thus enhancing the lifespan of membrane components in AnMBRs and identifying potential directions for future AnMBR research.

Less pressure contributes to gravity-driven membrane ultrafiltration with greater performance: Enhanced driving efficiency and reduced disinfection by-products formation potential

Gravity-driven membrane (GDM) systems have been well developed previously; however, impacts of driving (i.e., transmembrane) pressure on their performance received little attention, which may influence GDM performance. In this study, we evaluated 4 GDM systems via altering the transmembrane pressure from 50 mbar to 150 mbar with 2 groups, treating surface water in Beijing, China. Results showed that less driving pressure was more favorable. Specifically, compared to groups (150 mbar), groups under a pressure of 50 mbar were found to have greater normalized permeability and lower total resistance. During the whole operation period, the quality of effluents was gradually improved. For example, the removal efficiency of UV254 was significantly improved; particularly, under low driving pressure, the removal efficiency of UV254 in PES GDM system increased by 11.91%, as compared to the corresponding system under high driving pressure. This observation was consistent with the reduction on disinfection by-products (DBPs) formation potential; groups under 50 mbar achieved better DBPs potential control, indicating the advantages of lower driving pressure. Biofilms were analyzed and responsible for these differences, and distinct distributions of bacteria communities of two GDM systems under 50 and 150 mbar may be responsible for various humic-like substances removal efficiency. Overall, GDM systems under less pressure should be considered and expected to provide suggestions on the design of GDM systems in real applications.

Novel sodium percarbonate-MnO2 effervescent tablets for efficient and moderate membrane cleaning

Membrane flux recovery efficiency and durability are two key factors closely associated with the practical application for membrane cleaning process. However, conventional chemical membrane cleaning method by soaking the whole membrane module in highly concentrated chemical reagents has prominent drawbacks including the low mass transfer efficiency of reagents, long period of washing time, and the potential threat to membrane structure. Herein, for the first time, we report a facile approach to fabricate the sodium percarbonate-MnO₂ effervescent tablets which show bubbling reaction to release oxygen and free radicals when being dispersed in water for membrane cleaning. Due to the synergistic effect of MnO₂ and sodium percarbonate, the tablets are highly effective to clean the membrane fouled by humic acid within 5 min, with the terminal membrane flux being recovered from 0.50 to 0.95, and the irreversible fouling resistance being reduced by more than 90%, which is prominently more efficient than the conventional chemical cleaning methods. Moreover, even by consecutive membrane fouling and cleaning for 6 times, the membrane flux and filtration efficiency of the membrane could still be kept almost constant, and the moderateness of this membrane cleaning method was also verified by the systematic microscopic analysis. For mechanism study, results of Electron Spin Resonance (ESR) and quenching experiments indicated that the high-efficiency and robust durability of sodium percarbonate-MnO₂ (SPC-MnO₂) system for membrane cleaning was mainly attributed to the abundantly generated hydroxyl radicals and secondary free radicals (i.e. carbonate radicals). Conclusively, compared with the conventional membrane cleaning method with liquid cleaning reagents, the novel SPC-MnO₂ system with remarkable advantages in terms of convenience and membrane cleaning performance demonstrated high potential for the wide application in practice.