Preparation of functionalized MXene-stitched-graphene oxide/poly (ethylene-co-acrylic acid) nanocomposite with enhanced hydrogen gas barrier properties

A microfluidic ratiometric electrochemical aptasensor for highly sensitive and selective detection of 3,3',4,4'-tetrachlorobiphenyl

This study proposes a strategy using a microfluidic ratiometric electrochemical aptasensor to detect PCB77 with excellent sensitivity and specificity. This sensing platform combines a microfluidic chip, a wireless integrated circuit system for aptamer-based electrochemical detection, and a mobile phone control terminal for parameter configuration, identification, observation, and wireless data transfer. The sensing method utilizes a cDNA (MB-COOH-cDNA-SH) that is labelled with the redox probe Methylene Blue (MB) at the 5' end and has a thiol group at the 3' end. Additionally, it utilizes a single strand PCB aptamer that has been modified with ferrocenes at the 3' end (aptamer-Fc). Through gold-thiol binding, the labelled probe of MB-COOH-cDNA-SH was self-assembled onto the surface of an Au/Nb2CTx/GO modified electrode. On exposure to aptamer-Fc, it will hybridize with MB-COOH-cDNA-SH to form a stable double-stranded structure on the electrode surface. When PCB77 is present, aptamer-Fc binds specifically to the target, enabling the double-stranded DNA to unwind. Such variation caused changes in the differential pulse voltammetry (DPV) peak currents of both MB and Fc. A substantial improvement is observed in the ratio between the two DPV peaks. Under the optimum experimental conditions, this assay has a response that covers the 0.0001 to 1000 ng mL-1 PCB77 concentration range, and the detection limit is 1.56 × 10-5 ng mL-1. The integration of a ratiometric electrochemical aptasensor with designed microfluidic and integrated devices in this work is an innovative and promising approach that offers an efficient platform for on-site applications.

MXene-NH2/chitosan hemostatic sponges for rapid wound healing

Effective control of wound bleeding and sustained promotion of wound healing remain a major challenge for hemostatic materials. In this study, the hemostatic sponge with controllable antibacterial and adjustable continuous promotion of wound healing (CMNCu) was prepared by chitosan, aminated MXene and copper ion. Interestingly, the internal topological point-line-surface interaction endowed the CMN-Cu sponge longitudinal staggered tubular porous microstructure, combined with the lipophilic properties obtained by modified MXene, which greatly improved its flexibility, wet elasticity and blood enrichment capacity. In addition, the sponge achieved controlled release of active ingredients, which made it present highly effective antibacterial activity and long-lasting ability to promote wound healing. In vitro and in vivo experiments confirmed that CMN-Cu sponge presented high-efficient hemostatic performance. Last but not least, a series of cell experiments showed that the CMN-Cu sponge had excellent safety as a hemostatic material.

MXene-Based Elastomer Mimetic Stretchable Sensors: Design, Properties, and Applications

Flexible sensors based on MXene-polymer composites are highly prospective for next-generation wearable electronics used in human-machine interfaces. One of the motivating factors behind the progress of flexible sensors is the steady arrival of new conductive materials. MXenes, a new family of 2D nanomaterials, have been drawing attention since the last decade due to their high electronic conductivity, processability, mechanical robustness and chemical tunability. In this review, we encompass the fabrication of MXene-based polymeric nanocomposites, their structure-property relationship, and applications in the flexible sensor domain. Moreover, our discussion is not only limited to sensor design, their mechanism, and various modes of sensing platform, but also their future perspective and market throughout the world. With our article, we intend to fortify the bond between flexible matrices and MXenes thus promoting the swift advancement of flexible MXene-sensors for wearable technologies.

Nonaqueous Interfacial Polymerization-Derived Polyphosphazene Films for Sieving or Blocking Hydrogen Gas

A series of cyclomatrix polyphosphazene films have been prepared by nonaqueous interfacial polymerization (IP) of small aromatic hydroxyl compounds in a potassium hydroxide dimethylsulfoxide solution and hexachlorocyclotriphosphazene in cyclohexane on top of ceramic supports. Via the amount of dissolved potassium hydroxide, the extent of deprotonation of the aromatic hydroxyl compounds can be changed, in turn affecting the molecular structure and permselective properties of the thin polymer networks ranging from hydrogen/oxygen barriers to membranes with persisting hydrogen permselectivities at high temperatures. Barrier films are obtained with a high potassium hydroxide concentration, revealing permeabilities as low as 9.4 × 10^-17 cm³ cm cm^-2 s^-1 Pa^-1 for hydrogen and 1.1 × 10^-16 cm³ cm cm^-2 s^-1 Pa^-1 for oxygen. For films obtained with a lower concentration of potassium hydroxide, single gas permeation experiments reveal a molecular sieving behavior, with a hydrogen permeance of around 10^-8 mol m^-2 s^-1 Pa^-1 and permselectivities of H₂/N₂ (52.8), H₂/CH₄ (100), and H₂/CO₂ (10.1) at 200 °C.

Challenges and issues with the performance of boron nitride rooted membrane for gas separation

Various fillers such as zeolites, metal-organic framework, carbon, metal framework, graphene, and covalent organic framework have been incorporated into the polymers. However, these materials are facing issues such as incompatibility with the polymer matrix, which leads to the formation of non-selective voids and thus, reduces the gas separation properties. Recent studies show that hexagonal boron nitride (h-BN) possesses attractive characteristics such as high aspect ratio, good compatibility with polymer materials, enhanced gas barrier performance, and improved mechanical properties, which could make h-BN the potential candidate to replace conventional fillers. The synthesis of materials and membranes is the subject of this review, which focuses on recent developments and ongoing problems. Additionally, a summary of the mathematical models that were utilised to forecast how well polymer composites would perform in gas separation is provided. It was found in the previous studies that tortuosity is the governing factor for the determination of the effectiveness of a nanofiller as a gas barrier enhancer in polymer matrices. The shape of the nanofiller particles and sheets, disorientation and distribution of the nanofillers within the polymer matrix, state of aggregation and rate of reaggregation of the nanofiller particles, as well as the compatibility of the nanofiller with the polymer matrix all played a significant role in determining how well a particular nanofiller will perform in enhancing the gas barrier properties of the nanocomposites. For this purpose, this review has been focused not only on the experimentation work but also on the effect of tortuosity, exfoliation quality, compatibility, disorientation, and reaggregation of nanofillers.

Synthesis of Large-Area MXenes with High Yields through Power-Focused Delamination Utilizing Vortex Kinetic Energy

Evaluating the delamination process in the synthesis of MXenes (2D transition metal carbides and nitrides) is critical for their development and applications. However, the preparation of large defect-free MXene flakes with high yields is challenging. Here, a power-focused delamination (PFD) strategy is demonstrated that can enhance both the delamination efficiency and yield of large Ti₃ C₂ T_x MXene nanosheets through repetitive precipitation and vortex shaking processes. Following this protocol, a colloidal concentration of 20.4 mg mL^-1 of the Ti₃ C₂ T_x MXene can be achieved after five PFD cycles, and the yield of the basal-plane-defect-free Ti₃ C₂ T_x nanosheets reaches 61.2%, which is 6.4-fold higher than that obtained using the sonication-exfoliation method. Both nanometer-thin devices and self-supporting films exhibit excellent electrical conductivities (≈25 000 and 8260 S cm^-1 for a 1.8 nm thick monolayer and 11 µm thick film, respectively). Hydrodynamic simulations reveal that the PFD method can efficiently concentrate the shear stress on the surface of the unexfoliated material, leading to the exfoliation of the nanosheets. The PFD-synthesized large MXene nanosheets exhibit superior electrical conductivities and electromagnetic shielding (shielding effectiveness per unit volume: 35 419 dB cm² g^-1 ). Therefore, the PFD strategy provides an efficient route for the preparation of high-performance single-layer MXene nanosheets with large areas and high yields.