Dynamics of biofilms on different polymeric membranes – A comparative study using five physiologically and genetically distinct bacteria

Comprehensive understanding of the aging and biodegradation of polystyrene-based plastics

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C-C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution.

Encapsulating potential and functional properties of exopolysaccharide from Limosilactobacillus reuteri KCTC 14626BP isolated from human breast milk

Exopolysaccharides (EPS) are natural, nontoxic, biocompatible and biodegradable macromolecules produced by microorganisms, including the Lactic acid bacteria, to enhance protection against environmental stress conditions. The current study focused on the encapsulation and functional efficiency of EPS produced by probiotic strains isolated from human milk. Among 27 isolates, the potential high EPS-producing strain Limosilactobacillus reuteri KCTC 14626BP was selected based on biofilm production. The structural Characterization of EPS was performed based on FTIR, NMR and functional properties were determined; further, the encapsulation efficiency of EPS was determined with caffeic acid. The results indicate that L. reuteri produced EPS major component consisting of glucose, galactose and arabinose with the ratio of (0.78:0.16: 0.05). The antioxidant efficiency of EPS-LR was determined on DPPH (60.3 %) and ABTS (48.9 %); EPS showed enhanced functional activities. The absence of toxicity was confirmed based on Caenorhabditis elegans. The EPS-loaded Caffeic acid (CA) EPS-LR indicated spherical capsules with rough surfaces, with sizes ranging from 1.39 to 6.75 μm. These findings indicate that EPS-LR can be applied as a bioactive compound and encapsulating material in food, cosmetics, and pharmaceutical industries.

New insights into multi-strategies of sludge granulation in up-flow anaerobic sludge blanket reactors from community succession and interaction

This study aimed to elucidate the multiple strategies employed by anaerobes during granulation in a laboratory upflow anaerobic sludge blanket reactor, based on microbial succession and interactions. The anaerobic granulation process featured staged dominance of microbial genera, corresponding well with the environmental traits. Across the stages (selection, seeding, expansion, and maturation), chemotaxis attraction of nitrogen and/or carbon sources and flagellar motion were the primary strategy of microbial assembly. The second messengers - cyclic adenosine and guanosine monophosphates - partially regulated the agglomeration of filamentous Euryachaeota and Chloroflexi as the inner cores, while quorum sensing mediated the expansion of granules prior to maturation. Antagonism or competition governed the interactions within the phylogenetic molecular ecological network during sludge granulation, which were largely driven by the low-abundance (<1%) taxa. These new insights suggest that better engineering solutions to enhance chemotaxis attraction and species selection could achieve more efficient anaerobic granular sludge processes.

Biofouling in Membrane Bioreactors: Mechanism, Interactions and Possible Mitigation Using Biosurfactants

Biofouling roots damage to membrane bioreactors (MBRs), such as physical, functional and organisational changes and even therefore clogging of the membrane pores and successive microbial degradation. Further, it blocks the pores, results into a biomass cake and in due course reduces the membrane flux and leads to an increase in the operational costs. MBR fouling contributed to the rise in transmembrane pressure (TMP) and decrease in permeate flux (in case of constant pressure operation mode). Chemical surfactants adopted for the cleaning of membrane surfaces have certain disadvantages such as toxicity manifestations, damage to the membranes and high CMC concentrations. Biosurfactant surfactants have attained increasing interest due to their low toxicity, biodegradability, stability to extreme environmental conditions such as temperatures, pH and tolerance to salinity. The biosurfactants trapped the foulants via micelle formation, which distresses hydrophobic interactions amongst bacteria and the surface. Rhamnolipids as an anionic biosurfactant pose a significant interfacial potential and have affinity to bind organic matter. The present review discusses the problem of biofouling in MBRs, type and interactions of foulants involved and also highlights the mechanisms of biosurfactant cleaning, effect of different parameters, effect of concentration, TMP, flux recovery, permeability, mitigation practices and challenges.

Biofouling control potential of quorum quenching anaerobes in lab-scale anaerobic membrane bioreactors: Foulants profile and microbial dynamics

Indigenously isolated anaerobes encoding four quorum quenching (QQ) enzymes were applied in immobilized- and bioaugmented forms for their implications on membrane foulants, microbial taxa, and biofouling control. Two identical anaerobic membrane bioreactors (AnMBRs) with different immobilizing media, i.e. silica-alginate (AnMBR-Si) and hollow fiber-alginate (AnMBR-Hf), were sequentially operated for two conventional and three QQ based phases. The synergistic addition of QQ anaerobes in free cells and the immobilized form prolonged the membrane filtration operation by 172 ± 29% and 284 ± 12% in AnMBR-Si and AnMBR-Hf, respectively. Biocake with low surface coverage was prominent during QQ application compared to conventional phases. Despite the better control of AHLs (3OC6-, C6-, 3OC8, C8, and C10-HSL) and AI-2 at various points of QQ phases, the QQ consortium could not maintain a low concentration of signals for longer period. Therefrom, quenching of targeted signal molecules instigate the dominance of microbial species bearing non-targeted quorum sensing mechanism. The QQ significantly altered the biofilm-forming community in mixed liquor, while the members with robust signal transduction systems became dominant to counteract the QQ mechanism and were the ultimate cause of biofouling. The improved methane content in biogas and increased methanogens composition during QQ phases demonstrated the synergism of exogenous and immobilized QQ as the most viable option for long-term AnMBR operation.

Exopolysaccharide composition and size in Sulfolobus acidocaldarius biofilms

Extracellular polymeric substances (EPS) comprise mainly carbohydrates, proteins and extracellular DNA (eDNA) in biofilms formed by the thermoacidophilic Crenarchaeon Sulfolobus acidocaldarius. However, detailed information on the carbohydrates in the S. acidocaldarius biofilm EPS, i.e., the exopolysaccharides (PS), in terms of identity, composition and size were missing. In this study, a set of methods was developed and applied to study the PS in S. acidocaldarius biofilms. It was initially shown that addition of sugars, most significantly of glucose, to the basal N-Z-amine-based growth medium enhanced biofilm formation. For the generation of sufficient amounts of biomass suitable for chemical analyses, biofilm growth was established and optimized on the surface of membrane filters. EPS were isolated and the contents of carbohydrates, proteins and eDNA were determined. PS purification was achieved by enzymatic digestion of other EPS components (nucleic acids and proteins). After trifluoroacetic acid-mediated hydrolysis of the PS fraction, the monosaccharide composition was analyzed by reversed-phase liquid chromatography (RP-LC) coupled to mass spectrometry (MS). Main sugar constituents detected were mannose, glucose and ribose, as well as minor proportions of rhamnose, N-acetylglucosamine, glucosamine and galactosamine. Size exclusion chromatography (SEC) revealed the presence of one single PS fraction with a molecular mass of 4-9 × 10⁴ Da. This study provides detailed information on the PS composition and size of S. acidocaldarius MW001 biofilms and methodological tools for future studies on PS biosynthesis and secretion.

Electrospun Nanofibrous Membranes Accelerate Biofilm Formation and Probiotic Enrichment: Enhanced Tolerances to pH and Antibiotics

Biofilms are the oldest, most successful, and most widely distributed form of microorganism life on earth, existing even in extreme environments. Presently, probiotics in biofilm phenotype are thought as the most advanced fourth-generation probiotics. However, high-efficiency and large-scale biofilm enrichment in an artificial way is difficult. Here, fibrous membranes as probiotic biofilm-enriching materials are studied. Electrospun cellulose acetate nanofibrous membranes with nano-sized fibers show outstanding superiority over fibrous membranes with micron-sized fibers in Lactobacillus paracasei biofilm enrichment. The special 3D structure of electrospun nanofibrous membranes makes other facilitating biofilm formation factors insignificant. With a suitable scaffold/culture medium ratio, nearly 100% of L. paracasei cells exist as biofilm phenotype on the membrane from the very beginning, not planktonic state. L. paracasei biofilms possess a potential for long-term survival and high tolerances toward strong acidic and alkali conditions and antibiotics. RNA sequencing results explain why L. paracasei biofilms possess high tolerances toward harsh environments as compared to planktonic L. paracasei. Electrospun nanofibrous membranes can serve as powerful biofilm-enriching scaffolds for probiotics and other valuable microbes.

Biofilm Formation and Biofouling Development on Different Ultrafiltration Membranes by Natural Anaerobes from an Anaerobic Membrane Bioreactor

Biofouling in anaerobic membrane bioreactors (AnMBRs) has not been studied widely. Moreover, the effect of membrane surface properties on biofilm formation beyond initial deposition is controversial. We investigated biofouling with polyvinyldifluoride, polyacrylonitrile, and zwitterion-modified polyethersulfone ultrafiltration membranes having different properties during 72 h filtration using natural anaerobes isolated from AnMBR and analyzed biofilm characteristics by physicochemical and molecular techniques. A decrease in membrane performance was positively correlated with biofilm formation on polyvinyldifluoride and polyacrylonitrile membranes, and as expected, physical cleaning effectively mitigated biofilm on hydrophilic and low-roughness membranes. Surprisingly, while the biofilm on the hydrophilic and low-surface roughness zwitterion-modified membrane was significantly impaired, the impact on transmembrane pressure was the highest. This was ascribed to the formation of a soft compressible thin biofilm with high hydraulic resistance, and internal clogging and pore blocking due to high pore-size distribution. Anaerobe community analysis demonstrated some selection between the bulk and biofilm anaerobes and differences in the relative abundance of the dominant anaerobes among the membranes. However, correlation analyses revealed that all membrane properties studied affected microbial communities' composition, highlighting the system's complexity. Overall, our findings indicate that the membrane properties can affect biofilm formation and the anaerobic microbial population but not necessarily alleviate biofouling.

Genetic insights unraveling quorum quenching potential of indigenous isolates from an anaerobic membrane bioreactor

Despite a few reports of quorum quenching (QQ) in anaerobic membrane bioreactors (AnMBRs), the sensing, regulation and degradation mechanism for quorum sensing (QS) signals by indigenous QQ isolates have been barely studied. This study employed isolation and screening of indigenous QQ strains from anaerobic sludge for acyl-homoserine lactones (AHLs) degradation and membrane biofouling control. High-quality whole genome sequences of Micrococcus luteus anQ-m1, Bacillus pacificus anQ-h4, and Lysinibacillus capsici anQ-h6 were obtained, with a genome size of 2.5, 5.6, and 4.7 Mbp, respectively. Amidase-encoding amiE was the only QQ gene in anQ-m1, while anQ-h6 carries both amiE and lactonase-encoding aiiB genes. Genes responsible for QS autoinducer synthesis were not identified in anQ-m1 and anQ-h6, suggesting low potential of biofilm promotion via QS. Despite a peptidic QS system responsible for biofilm formation, anQ-h4 bears the most comprehensive QQ system, including amiE-amidase, aiiA-lactonase, CYP102A5-cytochrome oxidoreductase, and lsrK-autoinducer-2 kinase. This study elucidates QS and QQ mechanisms of potential anaerobes and provides fundamentals for designing QQ consortia to effectively control biofouling in AnMBRs.