A novel IL/MOF/polymer mixed matrix membrane having superior CO2/N2 selectivity

Challenges and recent advances in MOF-based gas separation membranes

Membrane-based gas separation, characterized by a small footprint, low energy consumption and no pollution, has gained widespread attention as an environmentally friendly alternative to traditional gas separation. Metal-organic-frameworks (MOFs) are considered to be one of the most promising membrane-based gas separation materials because of their large specific surface area and high porosity. One of the hottest studies at the moment is how to utilize the characteristics of MOFs to prepare higher performance gas separation membranes. This paper provides a review of gas separation membranes used in recent years. Firstly, the synthesis methods of MOFs and MOF membranes are briefly introduced. Then, methods to improve the membrane properties of MOFs are described in detail, and include applications of lamellar MOFs, ionic liquid (IL) spin coating, functionalization of MOFs, defect engineering and mixed fillers. In addition, the challenges of MOF-based gas separation membranes are presented, including pore size, environmental disturbances, plasticization, interfacial compatibility, and so on. Finally, based on the current development status of the MOF membranes, the development prospects of MOF gas separation membranes are discussed. It is hoped to provide reliable and complete ideas for researchers to prepare high-performance gas separation membranes in the future.

Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation

The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.

Ionic-liquid-modified MOFs incorporated in a mixed-matrix membrane by metal-site anchoring for gas separation

Through metal-site anchoring, metal-organic frameworks (MOFs) were modified with ionic liquids (ILs) and used as a porous filler to prepare mixed-matrix membranes (MMMs). The targeted growth of the IL exposed more active sites and greatly enhanced CO2 transfer in the MMMs, which exhibited excellent gas separation performance and long durability.

Progress in advanced electrospun membranes for CO2 capture: Feedstock, design, and trend

The emission of large amounts of carbon dioxide has caused serious environmental problems and hindered the construction of a green and low-carbon society. Efficient carbon dioxide capture has become an important means to slow down global climate warming and achieve effective utilization of carbon dioxide. Membranes synthesized by electrospinning technology are becoming promising carbon capture materials due to their unique characteristics. This review describes the features of membranes prepared from available raw materials and presents their application performances in carbon capture. The preparation methods of various types of membrane materials with excellent capture performance are summarized, and the effects of electrospinning parameters on electrospun fibers are systematically analyzed. Furthermore, recommendations and expectations for further development of electrospun membranes for carbon capture applications are given. These works provide important references for an in-depth understanding of the development status of electrospun membranes in the field of carbon capture and for expanding future research.

Construction of carbon nitride/zeolitic imidazolate framework-67 heterojunctions on carbon fiber cloth as the photocatalyst for various pollutants removal and hydrogen production

With the macroscale and conductive carbon fiber cloth (CFC) as the substrate, the obtained self-supported photocatalysts hold great promise for enhancing the separation of generated carriers and the recyclability of catalysts, thereby improving the photocatalytic performance and practicality in various applications. Additionally, decorating metal-organic frameworks (MOFs) with ultrahigh surface area on the surface of effective semiconductors is a promising method to enhance the adsorption capacity and photocatalytic performance. Herein, zeolitic imidazolate framework-67 (ZIF-67) as a typical MOFs was applied to modify carbon nitride (C3N4) on the surface of macroscale and conductive CFC. CFC/C3N4/ZIF-67 (4 × 4 cm2) was obtained by a thermal condensation-chemical bath deposition two-step route, and it shows superior adsorption and photocatalytic activity toward bisphenol A (BPA), levofloxacin (LVFX), ciprofloxacin (CIP) and good hydrogen evolution activity. Besides, the recycling test for four cycles indicates the high stability of CFC/C3N4/ZIF-67 with an easy recycling process. In this study, CFC/C3N4/ZIF-67 was prepared through the hydrothermal and chemical bath deposition two-step method, which enhances light absorption and photocatalytic performance, as well as recyclability for solving environmental and energy issues.

Copolyimide Brushes as a Component of a Hybrid Poly(phenylene Oxide) Membrane for Controlling Gas Separation: Effect of Water, Methanol, and Hexane Vapors

The effect of water, methanol, and hexane vapors on gas permeability was studied in a hybrid membrane containing 5 wt% copolyimide brushes with poly(methyl methacrylate) side chains (PI-g-PMMA) in a poly(phenylene oxide) (PPO) matrix, and in a pristine PPO membrane. These membranes in the form of dense nonporous films were further examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM), as well as by measuring their mechanical and gas transport properties. A gas separation study of the membranes in a dry state and the membranes saturated with water, methanol, and hexane vapors was performed to estimate the effect of each vapor on the H2, CO2, N2 permeability and selectivity in the separation of H2/N2 and CO2/N2 pairs. In general, saturation with water, methanol, and hexane vapors caused a decrease in the gas permeability of both membranes. The hybrid membrane containing copolyimide brushes demonstrated enhanced selectivity in the separation of H2/N2 and CO2/N2 pairs. It was found that a special effect of the vapors used for membrane saturation is associated with their molar volume. The solubility and diffusion coefficients of N2 and CO2 were obtained by Grand Canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations.

Ionic Liquids Functionalized MOFs for Adsorption

Metal-organic frameworks (MOFs) and ionic liquids (ILs) represent promising materials for adsorption separation. ILs incorporated into MOF materials (denoted as IL/MOF composites) have been developed, and IL/MOF composites combine the advantages of MOFs and ILs to achieve enhanced performance in the adsorption-based separation of fluid mixtures. The designed different ILs are introduced into the various MOFs to tailor their functional properties, which affect the optimal adsorptive separation performance. In this Perspective, the rational fabrication of IL/MOF composites is presented, and their functional properties are demonstrated. This paper provides a critical overview of an emergent class of materials termed IL/MOF composites as well as the recent advances in the applications of IL/MOF composites as adsorbents or membranes in fluid separation. Furthermore, the applications of IL/MOF in adsorptive gas separations (CO2 capture from flue gas, natural gas purification, separation of acetylene and ethylene, indoor pollutants removal) and liquid separations (separation of bioactive components, organic-contaminant removal, adsorptive desulfurization, radionuclide removal) are discussed. Finally, the existing challenges of IL/MOF are highlighted, and an appropriate design strategy direction for the effective exploration of new IL/MOF adsorptive materials is proposed.

Composite of MIL-101(Cr) with a Pyrrolidinium-Based Ionic Liquid Providing High CO2 Selectivity

Capturing CO₂ selectively from flue gas and natural gas addresses the criteria of a sustainable society. In this work, we incorporated an ionic liquid (IL) (1-methyl-1-propyl pyrrolidinium dicyanamide, [MPPyr][DCA]) into a metal organic framework (MOF), MIL-101(Cr), by wet impregnation and characterized the resulting [MPPyr][DCA]/MIL-101(Cr) composite in deep detail to identify the interactions between [MPPyr][DCA] molecules and MIL-101(Cr). Consequences of these interactions on the CO₂/N₂, CO₂/CH₄, and CH₄/N₂ separation performance of the composite were examined by volumetric gas adsorption measurements complemented by the density functional theory (DFT) calculations. Results showed that the composite offers remarkably high CO₂/N₂ and CH₄/N₂ selectivities of 19,180 and 1915 at 0.1 bar and 15 °C corresponding to 1144- and 510-times improvements, respectively, as compared to the corresponding selectivities of pristine MIL-101(Cr). At low pressures, these selectivities reached practically infinity, making the composite completely CO₂-selective over CH₄ and N₂. The CO₂/CH₄ selectivity was improved from 4.6 to 11.7 at 15 °C and 0.001 bar, yielding a 2.5-times improvement, attributed to the high affinity of [MPPyr][DCA] toward CO₂, validated by the DFT calculations. These results offer broad opportunities for the design of composites where ILs are incorporated into the pores of MOFs for high performance gas separation applications to address the environmental challenges.

Mixed Matrix Membranes for Carbon Capture and Sequestration: Challenges and Scope

Carbon dioxide (CO₂) is a major greenhouse gas responsible for the increase in global temperature, making carbon capture and sequestration (CCS) crucial for controlling global warming. Traditional CCS methods such as absorption, adsorption, and cryogenic distillation are energy-intensive and expensive. In recent years, researchers have focused on CCS using membranes, specifically solution-diffusion, glassy, and polymeric membranes, due to their favorable properties for CCS applications. However, existing polymeric membranes have limitations in terms of permeability and selectivity trade-off, despite efforts to modify their structure. Mixed matrix membranes (MMMs) offer advantages in terms of energy usage, cost, and operation for CCS, as they can overcome the limitations of polymeric membranes by incorporating inorganic fillers, such as graphene oxide, zeolite, silica, carbon nanotubes, and metal-organic frameworks. MMMs have shown superior gas separation performance compared to polymeric membranes. However, challenges with MMMs include interfacial defects between the polymeric and inorganic phases, as well as agglomeration with increasing filler content, which can decrease selectivity. Additionally, there is a need for renewable and naturally occurring polymeric materials for the industrial-scale production of MMMs for CCS applications, which poses fabrication and reproducibility challenges. Therefore, this research focuses on different methodologies for carbon capture and sequestration techniques, discusses their merits and demerits, and elaborates on the most efficient method. Factors to consider in developing MMMs for gas separation, such as matrix and filler properties, and their synergistic effect are also explained in this Review.

The Effect of Complex Modifier Consisting of Star Macromolecules and Ionic Liquid on Structure and Gas Separation of Polyamide Membrane

A novel hybrid membrane was developed on the basis of poly(m-phenylene isophthalamide) (PA) by introducing an original complex modifier into the polymer; this modifier consisted of equal amounts of heteroarm star macromolecules with a fullerene C₆₀ core (HSM) and the ionic liquid [BMIM][Tf₂N] (IL). The effect of the (HSM:IL) complex modifier on characteristics of the PA membrane was evaluated using physical, mechanical, thermal, and gas separation techniques. The structure of the PA/(HSM:IL) membrane was studied by scanning electron microscopy (SEM). Gas transport properties were determined by measuring He, O₂, N₂, and CO₂ permeation through the membranes based on PA and its composites containing a 5 wt% modifier. The permeability coefficients of all gases through the hybrid membranes were lower than the corresponding parameters for the unmodified membrane, whereas the ideal selectivity in the separation of He/N₂, CO₂/N_2, and O₂/N₂ gas pairs was higher for the hybrid membrane. The position of the PA/(HSM:IL) membrane on the Robeson's diagram for the O₂/N₂ gas pair is discussed.

Nanocarbon-Based Mixed Matrix Pebax-1657 Flat Sheet Membranes for CO2/CH4 Separation

In the present work, Pebax-1657, a commercial multiblock copolymer (poly(ether-block-amide)), consisting of 40% rigid amide (PA6) groups and 60% flexible ether (PEO) linkages, was selected as the base polymer for preparing dense flat sheet mixed matrix membranes (MMMs) using the solution casting method. Carbon nanofillers, specifically, raw and treated (plasma and oxidized) multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were incorporated into the polymeric matrix in order to improve the gas-separation performance and polymer's structural properties. The developed membranes were characterized by means of SEM and FTIR, and their mechanical properties were also evaluated. Well-established models were employed in order to compare the experimental data with theoretical calculations concerning the tensile properties of MMMs. Most remarkably, the tensile strength of the mixed matrix membrane with oxidized GNPs was enhanced by 55.3% compared to the pure polymeric membrane, and its tensile modulus increased 3.2 times compared to the neat one. In addition, the effect of nanofiller type, structure and amount to real binary CO₂/CH₄ (10/90 vol.%) mixture separation performance was evaluated under elevated pressure conditions. A maximum CO₂/CH₄ separation factor of 21.9 was reached with CO₂ permeability of 384 Barrer. Overall, MMMs exhibited enhanced gas permeabilities (up to fivefold values) without sacrificing gas selectivity compared to the corresponding pure polymeric membrane.

Integrating Molecular Simulations with Machine Learning Guides in the Design and Synthesis of [BMIM][BF4]/MOF Composites for CO2/N2 Separation

Considering the existence of a large number and variety of metal-organic frameworks (MOFs) and ionic liquids (ILs), assessing the gas separation potential of all possible IL/MOF composites by purely experimental methods is not practical. In this work, we combined molecular simulations and machine learning (ML) algorithms to computationally design an IL/MOF composite. Molecular simulations were first performed to screen approximately 1000 different composites of 1-n-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) with a large variety of MOFs for CO₂ and N₂ adsorption. The results of simulations were used to develop ML models that can accurately predict the adsorption and separation performances of [BMIM][BF₄]/MOF composites. The most important features that affect the CO₂/N₂ selectivity of composites were extracted from ML and utilized to computationally generate an IL/MOF composite, [BMIM][BF₄]/UiO-66, which was not present in the original material data set. This composite was finally synthesized, characterized, and tested for CO₂/N₂ separation. Experimentally measured CO₂/N₂ selectivity of the [BMIM][BF₄]/UiO-66 composite matched well with the selectivity predicted by the ML model, and it was found to be comparable, if not higher than that of all previously synthesized [BMIM][BF₄]/MOF composites reported in the literature. Our proposed approach of combining molecular simulations with ML models will be highly useful to accurately predict the CO₂/N₂ separation performances of any [BMIM][BF₄]/MOF composite within seconds compared to the extensive time and effort requirements of purely experimental methods.

Research on Improved MOF Materials Modified by Functional Groups for Purification of Water

With the rapid development of urbanization and industrialization, water contamination has gradually become a big problem. Relevant studies show that adsorption is an efficient strategy to treat pollutants in water. MOFs are a class of porous materials with a three-dimensional frame structure shaped by the self-assembly of metal centers and organic ligands. Because of its unique performance advantages, it has become a promising adsorbent. At present, single MOFs cannot meet the needs, but the introduction of familiar functional groups on MOFs can promote the adsorption performance of MOFs on the target. In this review, the main advantages, adsorption mechanism, and specific applications of various functional MOF adsorbents for pollutants in water are reviewed. At the end of the article, we summarize and discuss the future development direction.

Preparation of Pebax 1657/MAF-7 Mixed Matrix Membranes with Enhanced CO2/N2 Separation by Active Site of Triazole Ligand

Fillers play a critical role in the performance of mixed matrix membranes (MMMs). Microporous metal azolate frameworks (MAFs) are a subclass material of metal-organic frameworks (MOFs). Due to the uncoordinated nitrogen of the organic ligands, MAF-7 (SOD-[Zn(mtz)₂], Hmtz = 3-methyl-1,2,4-triazole, window: d = 0.34 nm) shows excellent CO₂ adsorption performance. In this work, Pebax 1657/MAF-7 MMMs were prepared by a sample solution casting method with MAF-7 particles as fillers for the first time. By means of X-ray diffraction (XRD), scanning electron microscope (SEM), infrared radiation (IR), and thermogravimetry (TG), the compositional and structural properties of the mixed matrix membrane with different filler content were analyzed. The results show that the compatibility of MAF-7 and Pebax is good with a filler content of 5 wt.%. The pure gas testing showed that mixed matrix membrane has a high ideal CO₂/N₂ selectivity of 124.84 together with a better CO₂ permeability of 76.15 Barrer with the optimized filler content of 5 wt.%. The obtained membrane showed 323.04% enhancement in selectivity of CO₂/N₂ and 27.74% increase in the permeability of CO₂ compared to the pristine membrane at 25 °C and 3 bar. The excellent separation performance may be due to the ligands that can afford a Lewis base active site for CO₂ binding with the uniform dispersion of MAF-7 particles in Pebax and the favorable interface compatibility. The obtained membrane overcomes the Robeson's upper bound in 2008 for CO₂/N₂ separation. This work provides a new strategy by utilizing MAFs as fillers with triazole ligand to enhance the gas separation performance of mixed matrix membranes.