Identifying promoters for gene expression in Clostridium thermocellum

The 6-phosphofructokinase reaction in Acetivibrio thermocellus is both ATP- and pyrophosphate-dependent

Acetivibrio thermocellus (formerly Clostridium thermocellum) is a potential platform for lignocellulosic ethanol production. Its industrial application is hampered by low product titres, resulting from a low thermodynamic driving force of its central metabolism. It possesses both a functional ATP- and a functional PPi-dependent 6-phosphofructokinase (PPi-Pfk), of which only the latter is held responsible for the low driving force. Here we show that, following the replacement of PPi-Pfk by cytosolic pyrophosphatase and transaldolase, the native ATP-Pfk is able to carry the full glycolytic flux. Interestingly, the barely-detectable in vitro ATP-Pfk activities are only a fraction of what would be required, indicating its contribution to glycolysis has consistently been underestimated. A kinetic model demonstrated that the strong inhibition of ATP-Pfk by PPi can prevent futile cycling that would arise when both enzymes are active simultaneously. As such, there seems to be no need for a long-sought-after PPi-generating mechanism to drive glycolysis, as PPi-Pfk can simply use whatever PPi is available, and ATP-Pfk complements the rest of the PFK-flux. Laboratory evolution of the ΔPPi-Pfk strain, unable to valorize PPi, resulted in a mutation in the GreA transcription elongation factor. This mutation likely results in reduced RNA-turnover, hinting at transcription as a significant (and underestimated) source of anabolic PPi. Together with other mutations, this resulted in an A. thermocellus strain with the hitherto highest biomass-specific cellobiose uptake rate of 2.2 g/gx/h. These findings are both relevant for fundamental insight into dual ATP/PPi Pfk-nodes, which are not uncommon in other microorganisms, as well as for further engineering of A. thermocellus for consolidated bioprocessing.

The role of AdhE on ethanol tolerance and production in Clostridium thermocellum

Many anaerobic microorganisms use the bifunctional aldehyde and alcohol dehydrogenase enzyme, AdhE, to produce ethanol. One such organism is Clostridium thermocellum, which is of interest for cellulosic biofuel production. In the course of engineering this organism for improved ethanol tolerance and production, we observed that AdhE was a frequent target of mutations. Here, we characterized those mutations to understand their effects on enzymatic activity, as well ethanol tolerance and product formation in the organism. We found that there is a strong correlation between NADH-linked alcohol dehydrogenase (ADH) activity and ethanol tolerance. Mutations that decrease NADH-linked ADH activity increase ethanol tolerance; correspondingly, mutations that increase NADH-linked ADH activity decrease ethanol tolerance. We also found that the magnitude of ADH activity did not play a significant role in determining ethanol titer. Increasing ADH activity had no effect on ethanol titer. Reducing ADH activity had indeterminate effects on ethanol titer, sometimes increasing and sometimes decreasing it. Finally, this study shows that the cofactor specificity of ADH activity was found to be the primary factor affecting ethanol yield. We expect that these results will inform efforts to use AdhE enzymes in metabolic engineering approaches.

Pyrophosphate as allosteric regulator of ATP-phosphofructokinase in Clostridium thermocellum and other bacteria with ATP- and PPi-phosphofructokinases

The phosphofructokinase (Pfk) reaction represents one of the key regulatory points in glycolysis. While most organisms encode for Pfks that use ATP as phosphoryl donor, some organisms also encode for PP_i-dependent Pfks. Despite this central role, the biochemical characteristics as well as the physiological role of both Pfks is often not known. Clostridium thermocellum is an example of a microorganism that encodes for both Pfks, however, only PP_i-Pfk activity has been detected in cell-free extracts and little is known about the regulation and function of both enzymes. In this study, the ATP- and PP_i-Pfk of C. thermocellum were purified and biochemically characterized. No allosteric regulators were found for PP_i-Pfk amongst common effectors. With fructose-6-P, PP_i, fructose-1,6-bisP, and P_i PP_i-Pfk showed high specificity (K_M < 0.62 mM) and maximum activity (V_max > 156 U mg^-1). In contrast, ATP-Pfk showed much lower affinity (K_0.5 of 9.26 mM) and maximum activity (14.5 U mg^-1) with fructose-6-P. In addition to ATP, also GTP, UTP and ITP could be used as phosphoryl donors. The catalytic efficiency with GTP was 7-fold higher than with ATP, suggesting that GTP is the preferred substrate. The enzyme was activated by NH₄⁺, and pronounced inhibition was observed with GDP, FBP, PEP, and especially with PP_i (K_i of 0.007 mM). Characterization of purified ATP-Pfks originating from eleven different bacteria, encoding for only ATP-Pfk or for both ATP- and PP_i-Pfk, identified that PP_i inhibition of ATP-Pfks could be a common phenomenon for organisms with a PP_i-dependent glycolysis.

Rewiring metabolism of Clostridium thermocellum for consolidated bioprocessing of lignocellulosic biomass poplar to produce short-chain esters

Consolidated bioprocessing (CBP) of lignocellulosic biomass uses cellulolytic microorganisms to enable enzyme production, saccharification, and fermentation to produce biofuels, biochemicals, and biomaterials in a single step. However, understanding and redirecting metabolisms of these microorganisms compatible with CBP are limited. Here, a cellulolytic thermophile Clostridium thermocellum was engineered and demonstrated to be compatible with CBP integrated with a Co-solvent Enhanced Lignocellulosic Fractionation (CELF) pretreatment for conversion of hardwood poplar into short-chain esters with industrial use as solvents, flavors, fragrances, and biofuels. The recombinant C. thermocellum engineered with deletion of carbohydrate esterases and stable overexpression of alcohol acetyltransferases improved ester production without compromised deacetylation activities. These esterases were discovered to exhibit promiscuous thioesterase activities and their deletion enhanced ester production by rerouting the electron and carbon metabolism. Ester production was further improved up to 80-fold and ester composition could be modulated by deleting lactate biosynthesis and using poplar with different pretreatment severity.

Synthetic biology of extremophiles: a new wave of biomanufacturing

Microbial biomanufacturing, powered by the advances of synthetic biology, has attracted growing interest for the production of diverse products. In contrast to conventional microbes, extremophiles have shown better performance for low-cost production owing to their outstanding growth and synthesis capacity under stress conditions, allowing unsterilized fermentation processes. We review increasing numbers of products already manufactured utilizing extremophiles in recent years. In addition, genetic parts, molecular tools, and manipulation approaches for extremophile engineering are also summarized, and challenges and opportunities are predicted for non-conventional chassis. Next-generation industrial biotechnology (NGIB) based on engineered extremophiles promises to simplify biomanufacturing processes and achieve open and continuous fermentation, without sterilization, and utilizing low-cost substrates, making NGIB an attractive green process for sustainable manufacturing.

Simple and Rapid Site-Specific Integration of Multiple Heterologous DNAs into the Escherichia coli Chromosome

Escherichia coli is the most studied and well understood microorganism, but research in this system can still be limited by available genetic tools, including the ability to rapidly integrate multiple DNA constructs efficiently into the chromosome. Site-specific, large serine-recombinases can be useful tools, catalyzing a single, unidirectional recombination event between 2 specific DNA sequences, attB and attP, without requiring host proteins for functionality. Using these recombinases, we have developed a system to integrate up to 12 genetic constructs sequentially and stably into in the E. coli chromosome. A cassette of attB sites was inserted into the chromosome and the corresponding recombinases were cloned onto temperature sensitive plasmids to mediate recombination between a non-replicating, attP-containing "cargo" plasmid and the corresponding attB site on the chromosome. The efficiency of DNA insertion into the E. coli chromosome was approximately 10⁷ CFU/μg DNA for six of the recombinases when the competent cells already contained the recombinase-expressing plasmid and approximately 10⁵ CFU/μg DNA or higher when the recombinase-expressing plasmid and "cargo" plasmid were co-transformed. The "cargo" plasmid contains ΦC31 recombination sites flanking the antibiotic gene, allowing for resistance markers to be removed and reused following transient expression of the ΦC31 recombinase. As an example of the utility of this system, eight DNA methyltransferases from Clostridium clariflavum 4-2a were inserted into the E. coli chromosome to methylate plasmid DNA for evasion of the C. clariflavum restriction systems, enabling the first demonstration of transformation of this cellulose-degrading species. IMPORTANCE More rapid genetic tools can help accelerate strain engineering, even in advanced hosts like Escherichia coli. Here, we adapt a suite of site-specific recombinases to enable simple, rapid, and highly efficient site-specific integration of heterologous DNA into the chromosome. This utility of this system was demonstrated by sequential insertion of eight DNA methyltransferases into the E. coli chromosome, allowing plasmid DNA to be protected from restriction in Clostridium clariflavum and enabling genetic transformation of this organism. This integration system should also be highly portable into non-model organisms.

The Roles of Nicotinamide Adenine Dinucleotide Phosphate Reoxidation and Ammonium Assimilation in the Secretion of Amino Acids as Byproducts of Clostridium thermocellum

Clostridium thermocellum is a cellulolytic thermophile that is considered for the consolidated bioprocessing of lignocellulose to ethanol. Improvements in ethanol yield are required for industrial implementation, but the incompletely understood causes of amino acid secretion impede progress. In this study, amino acid secretion was investigated via gene deletions in ammonium-regulated, nicotinamide adenine dinucleotide phosphate (NADPH)-supplying and NADPH-consuming pathways as well as via physiological characterization in cellobiose-limited or ammonium-limited chemostats. First, the contribution of the NADPH-supplying malate shunt was studied with strains using either the NADPH-yielding malate shunt (Δppdk) or a redox-independent conversion of PEP to pyruvate (Δppdk ΔmalE::P_eno-pyk). In the latter, branched-chain amino acids, especially valine, were significantly reduced, whereas the ethanol yield increased from 46 to 60%, suggesting that the secretion of these amino acids balances the NADPH surplus from the malate shunt. The unchanged amino acid secretion in Δppdk falsified a previous hypothesis on an ammonium-regulated PEP-to-pyruvate flux redistribution. The possible involvement of another NADPH-supplier, namely, NADH-dependent reduced ferredoxin:NADP⁺ oxidoreductase (nfnAB), was also excluded. Finally, the deletion of glutamate synthase (gogat) in ammonium assimilation resulted in the upregulation of NADPH-linked glutamate dehydrogenase activity and decreased amino acid yields. Since gogat in C. thermocellum is putatively annotated as ferredoxin-linked, a claim which is supported by the product redistribution observed in this study, this deletion likely replaced ferredoxin with NADPH in ammonium assimilation. Overall, these findings indicate that a need to reoxidize NADPH is driving the observed amino acid secretion, likely at the expense of the NADH needed for ethanol formation. This suggests that metabolic engineering strategies that simplify the redox metabolism and ammonium assimilation can contribute to increased ethanol yields. IMPORTANCE Improving the ethanol yield of C. thermocellum is important for the industrial implementation of this microorganism in consolidated bioprocessing. A central role of NADPH in driving amino acid byproduct formation was demonstrated by eliminating the NADPH-supplying malate shunt and separately by changing the cofactor specificity in ammonium assimilation. With amino acid secretion diverting carbon and electrons away from ethanol, these insights are important for further metabolic engineering to reach industrial requirements on ethanol yield. This study also provides chemostat data that are relevant for training genome-scale metabolic models and for improving the validity of their predictions, especially considering the reduced degree-of-freedom in the redox metabolism of the strains generated here. In addition, this study advances the fundamental understanding on the mechanisms underlying amino acid secretion in cellulolytic Clostridia as well as on the regulation and cofactor specificity in ammonium assimilation. Together, these efforts aid in the development of C. thermocellum for the sustainable consolidated bioprocessing of lignocellulose to ethanol with minimal pretreatment.

Ethanol tolerance of Clostridium thermocellum: the role of chaotropicity, temperature and pathway thermodynamics on growth and fermentative capacity

BACKGROUND

Clostridium thermocellum is a promising candidate for consolidated bioprocessing of lignocellulosic biomass to ethanol. The low ethanol tolerance of this microorganism is one of the remaining obstacles to industrial implementation. Ethanol inhibition can be caused by end-product inhibition and/or chaotropic-induced stress resulting in increased membrane fluidization and disruption of macromolecules. The highly reversible glycolysis of C. thermocellum might be especially sensitive to end-product inhibition. The chaotropic effect of ethanol is known to increase with temperature. This study explores the relative contributions of these two aspects to investigate and possibly mitigate ethanol-induced stress in growing and non-growing C. thermocellum cultures.

RESULTS

To separate chaotropic from thermodynamic effects of ethanol toxicity, a non-ethanol producing strain AVM062 (P_{clo1313_2638}::ldh* ∆adhE) was constructed by deleting the bifunctional acetaldehyde/alcohol dehydrogenase gene, adhE, in a lactate-overproducing strain. Exogenously added ethanol lowered the growth rate of both wild-type and the non-ethanol producing mutant. The mutant strain grew quicker than the wild-type at 50 and 55 °C for ethanol concentrations ≥ 10 g L^-1 and was able to reach higher maximum OD₆₀₀ at all ethanol concentrations and temperatures. For the wild-type, the maximum OD₆₀₀ and relative growth rates were higher at 45 and 50 °C, compared to 55 °C, for ethanol concentrations ≥ 15 g L^-1. For the mutant strain, no positive effect on growth was observed at lower temperatures. Growth-arrested cells of the wild-type demonstrated improved fermentative capacity over time in the presence of ethanol concentrations up to 40 g L^-1 at 45 and 50 °C compared to 55 °C.

CONCLUSION

Positive effects of temperature on ethanol tolerance were limited to wild-type C. thermocellum and are likely related to mechanisms involved in the ethanol-formation pathway and redox cofactor balancing. Lowering the cultivation temperature provides an attractive strategy to improve growth and fermentative capacity at high ethanol titres in high-cellulose loading batch cultivations. Finally, non-ethanol producing strains are useful platform strains to study the effects of chaotropicity and thermodynamics related to ethanol toxicity and allow for deeper understanding of growth and/or fermentation cessation under industrially relevant conditions.

Heterologous Gene Regulation in Clostridia: Rationally Designed Gene Regulation for Industrial and Medical Applications

Several species from the Clostridium genus show promise as industrial solvent producers and cancer therapeutic delivery vehicles. Previous development of shuttle plasmids and genome editing tools has aided the study of these species and enabled their exploitation in industrial and medical applications. Nevertheless, the precise control of gene expression is still hindered by the limited range of characterized promoters. To address this, libraries of promoters (native and synthetic), 5' UTRs, and alternative start codons were constructed. These constructs were tested in Escherichia coli K-12, Clostridium sporogenes NCIMB 10696, and Clostridium butyricum DSM 10702, using β-glucuronidase (gusA) as a gene reporter. Promoter activity was corroborated using a second gene reporter, nitroreductase (nmeNTR) from Neisseria meningitides. A strong correlation was observed between the two reporters. In C. sporogenes and C. butyricum, respectively, changes in GusA activity between the weakest and strongest expressing levels were 129-fold and 78-fold. Similar results were obtained with the nmeNTR. Using the GusA reporter, translation initiation from six alternative (non-AUG) start codons was measured in E. coli, C. sporogenes, and C. butyricum. Clearly, species-specific differences between clostridia and E. coli in translation initiation were observed, and the performance of the start codons was influenced by the upstream 5' UTR sequence. These results highlight a new opportunity for gene control in recombinant clostridia. To demonstrate the value of these results, expression of the sacB gene from Bacillus subtilis was optimized for use as a novel negative selection marker in C. butyricum. In summary, these results indicate improvements in the understanding of heterologous gene regulation in Clostridium species and E. coli cloning strains. This new knowledge can be utilized for rationally designed gene regulation in Clostridium-mediated industrial and medical applications, as well as fundamental research into the biology of Clostridium species.

Enabling Ethanologenesis in Moorella thermoacetica through Construction of a Replicating Shuttle Vector

Replicating plasmid shuttle vectors are key tools for efficient genetic and metabolic engineering applications, allowing the development of sustainable bioprocesses using non-model organisms with unique metabolic capabilities. To date, very limited genetic manipulation has been achieved in the thermophilic acetogen, Moorella thermoacetica, partly due to the lack of suitable shuttle vectors. However, M. thermoacetica has considerable potential as an industrial chassis organism, which can only be unlocked if reliable and effective genetic tools are in place. This study reports the construction of a replicating shuttle vector for M. thermoacetica through the identification and implementation of a compatible Gram-positive replicon to allow plasmid maintenance within the host. Although characterisation of plasmid behaviour proved difficult, the designed shuttle vector was subsequently applied for ethanologenesis, i.e., ethanol production in this organism. The non-native ethanologenesis in M. thermoacetica was achieved via plasmid-borne overexpression of the native aldh gene and heterologous expression of Clostridium autoethanogenum adhE1 gene. This result demonstrates the importance of the developed replicating plasmid vector for genetic and metabolic engineering efforts in industrially important M. thermoacetica.

Increasing the Thermodynamic Driving Force of the Phosphofructokinase Reaction in Clostridium thermocellum

The ability to control the distribution of thermodynamic driving force throughout a metabolic pathway is likely to be an important tool for metabolic engineering. The phosphofructokinase reaction is a key enzyme in Embden-Mayerhof-Parnas glycolysis and therefore improving the thermodynamic driving force of this reaction in C. thermocellum is believed to enable higher product titers.

Exploiting the Type I-B CRISPR Genome Editing System in Thermoanaerobacterium aotearoense SCUT27 and Engineering the Strain for Enhanced Ethanol Production

Thermoanaerobacterium aotearoense strain SCUT27 is a potential industrial biofuel-producing strain because of its broad substrate spectrum, especially the ability to co-use glucose and xylose. The bottleneck hindering the development of strain SCUT27 is the lack of selective markers for polygene manipulation in this thermophilic bacterium. In this study, the endogenous type I-B clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas) system was developed for multiplex genome editing of strain SCUT27. The protospacer-adjacent motif was identified by in silico analysis and verified with orotidine-5'-phosphate decarboxylase (pyrF) or lactate dehydrogenase (ldh) as the editing target. The type I-B CRISPR/Cas system was functional in strain SCUT27 with 58.3% to 100% editing efficiency. A multiplex genome editing method based on thymidine kinase (tdk) as a negative selection marker was developed, and strain SCUT27/Δtdk/Δldh/ΔargR, in which ldh and the arginine repressor (argR) were knocked out successively, was successfully obtained. Strain SCUT27/Δtdk/Δldh/ΔargR exhibited prominent advantages over wild-type SCUT27 in ethanol production, with significantly improved ability to metabolize xylose. IMPORTANCE Thermophilic microbes have attracted great attention as potential candidates for production of biofuels and chemicals from lignocellulose because of their thermal tolerance and wide substrate spectra. The ability to edit multiple genes using the native type I-B CRISPR/Cas system would speed up engineering of Thermoanaerobacterium aotearoense strain SCUT27 for higher ethanol production from lignocellulosic hydrolysates. Here, we produced a mutant strain, T. aotearoense SCUT27/Δtdk/Δldh/ΔargR, using the native CRISPR/Cas system. The engineered strain showed satisfactory performance with improved ethanol productivity from various lignocellulosic hydrolysates. Our data lay the foundations for development of this thermophilic microbe into an excellent ethanol producer using lignocellulosic hydrolysates. The methods described here may also provide a reference to develop multigene editing methods for other microorganisms.

CRISPR/Cas genome editing systems in thermophiles: Current status, associated challenges, and future perspectives

Thermophiles, offering an attractive and unique platform for a broad range of applications in biofuels and environment protections, have received a significant attention and growing interest from academy and industry. However, the exploration and exploitation of thermophilic organisms have been hampered by the lack of a powerful genome manipulation tool to improve production efficiency. At current, the clustered Regularly Interspaced Short Palindromic Repeat (CRISPR)/CRISPR associated (Cas) system has been successfully exploited as a competent, simplistic, and powerful tool for genome engineering both in eukaryotes and prokaryotes. Indeed, with the significant efforts made in recent years, some thermostable Cas9 proteins have been well identified and characterized and further, some thermostable Cas9-based editing tools have been successfully established in some representative obligate thermophiles. In this regard, we reviewed the current status and its progress in CRISPR/Cas-based genome editing system towards a variety of thermophilic organisms. Despite the potentials of these progresses, multiple factors/barriers still have to be overcome and optimized for improving its editing efficiency in thermophiles. Some insights into the roles of thermostable CRISPR/Cas technologies for the metabolic engineering of thermophiles as a thermophilic microbial cell factory were also fully analyzed and discussed.

Examination of Genetic Control Elements in the Phototrophic Firmicute Heliomicrobium modesticaldum

Heliomicrobium modesticaldum has been used as a model organism for the Heliobacteria, the only phototrophic family in the Firmicutes. It is a moderately thermophilic anoxygenic phototrophic bacterium that is capable of fermentative growth in the dark. The genetic manipulation of H. modesticaldum is still in its infancy. Methods to introduce genes through the use of exogenous plasmids and to delete genes from the chromosome through the use of the native CRISPR/Cas system have been developed in the last several years. To expand our genetic toolkit, it was necessary to control gene expression. In this study, we analyzed constitutive and inducible promoters developed for clostridia for their use in H. modesticaldum and further tested two reporters, adhB and lacZ, as indicators of promoter strength. Alcohol dehydrogenase (AdhB) was unsuitable as a reporter in this species due to high endogenous activity and/or low activity of the reporter, but a thermostable LacZ worked well as a reporter. A set of constitutive promoters previously reported to work in Clostridium thermocellum was found to be reliable for controlling the expression of the lacZ reporter gene in H. modesticaldum at a range of activities spanning an order of magnitude. An anhydrotetracycline-inducible promoter was created by inserting tetO operators into a strong constitutive promoter, but it was not fully repressible. The implementation of a xylose-inducible promoter resulted in complete repression of β-gal in the absence of xylose, and reliable expression tunable through the concentration of xylose added to the culture.

Synergy of Cellulase Systems between Acetivibrio thermocellus and Thermoclostridium stercorarium in Consolidated-Bioprocessing for Cellulosic Ethanol

Anaerobes harbor some of the most efficient biological machinery for cellulose degradation, especially thermophilic bacteria, such as Acetivibrio thermocellus and Thermoclostridium stercorarium, which play a fundamental role in transferring lignocellulose into ethanol through consolidated bioprocessing (CBP). In this study, we compared activities of two cellulase systems under varying kinds of hemicellulose and cellulose. A. thermocellus was identified to contribute specifically to cellulose hydrolysis, whereas T. stercorarium contributes to hemicellulose hydrolysis. The two systems were assayed in various combinations to assess their synergistic effects using cellulose and corn stover as the substrates. Their maximum synergy degrees on cellulose and corn stover were, respectively, 1.26 and 1.87 at the ratio of 3:2. Furthermore, co-culture of these anaerobes on the mixture of cellulose and xylan increased ethanol concentration from 21.0 to 40.4 mM with a high cellulose/xylan-to-ethanol conversion rate of up to 20.7%, while the conversion rates of T. stercorarium and A. thermocellus monocultures were 19.3% and 15.2%. The reason is that A. thermocellus had the ability to rapidly degrade cellulose while T. stercorarium co-utilized both pentose and hexose, the metabolites of cellulose degradation, to produce ethanol. The synergistic effect of cellulase systems and metabolic pathways in A. thermocellus and T. stercorarium provides a novel strategy for the design, selection, and optimization of ethanol production from cellulosic biomass through CBP.

Coordinated β-glucosidase activity with the cellulosome is effective for enhanced lignocellulose saccharification

Consolidated bio-saccharification (CBS) technology employs cellulosome-producing bacterial cells, rather than fungal cellulases, as biocatalysts for cost-effective production of lignocellulosic sugars. Extracellular β-glucosidase (BGL) expression in the whole-cell arsenal is indispensable, due to severe cellobiose inhibition of the cellulosome. However, high-level BGL expression in Clostridium thermocellum is challenging, and the optimal BGL production level for efficient cellulose saccharification is currently unknown. Herein, we obtained new CBS biocatalysts by transforming BGL-expressing plasmids into C. thermocellum, which produced abundant BGL proteins and hydrolyzed cellulose effectively. The optimal ratio of extracellular BGL-to-cellulosome activity was determined to be in a range of 5.5 to 21.6. Despite the critical impact of BGL, both excessive BGL expression and its assembly on the cellulosome via type I cohesin-dockerin interaction led to reduced cellulosomal activity, which further confirmed the importance of coordinated BGL expression with the cellulosome. This study will further promote industrial CBS application in lignocellulose conversion.

Deletion of the cytochrome bc complex from Heliobacterium modesticaldum results in viable but non-phototrophic cells

The heliobacteria, a family of anoxygenic phototrophs, possess the simplest known photosynthetic apparatus. Although they are photoheterotrophs in the light, the heliobacteria can also grow chemotrophically via pyruvate metabolism in the dark. In the heliobacteria, the cytochrome bc complex is responsible for oxidizing menaquinol and reducing cytochrome c₅₅₃ in the electron flow cycle used for phototrophy. However, there is no known electron acceptor for the mobile cytochrome c₅₅₃ other than the photochemical reaction center. We have, therefore, hypothesized that the cytochrome bc complex is necessary for phototrophy, but unnecessary for chemotrophic growth in the dark. We used a two-step method for CRISPR-based genome editing in Heliobacterium modesticaldum to delete the genes encoding the four major subunits of the cytochrome bc complex. Genotypic analysis verified the deletion of the petCBDA gene cluster encoding the catalytic components of the complex. Spectroscopic studies revealed that re-reduction of cytochrome c₅₅₃ after flash-induced photo-oxidation was over 100 times slower in the ∆petCBDA mutant compared to the wild-type. Steady-state levels of oxidized P₈₀₀ (the primary donor of the photochemical reaction center) were much higher in the ∆petCBDA mutant at every light level, consistent with a limitation in electron flow to the reaction center. The ∆petCBDA mutant was unable to grow phototrophically on acetate plus CO₂ but could grow chemotrophically on pyruvate as a carbon source similar to the wild-type strain in the dark. The mutants could be complemented by reintroduction of the petCBDA gene cluster on a plasmid expressed from the clostridial eno promoter.

Thermophilic whole-cell degradation of polyethylene terephthalate using engineered Clostridium thermocellum

Polyethylene terephthalate (PET) is a mass-produced synthetic polyester contributing remarkably to the accumulation of solid plastics waste and plastics pollution in the natural environments. Recently, bioremediation of plastics waste using engineered enzymes has emerged as an eco-friendly alternative approach for the future plastic circular economy. Here we genetically engineered a thermophilic anaerobic bacterium, Clostridium thermocellum, to enable the secretory expression of a thermophilic cutinase (LCC), which was originally isolated from a plant compost metagenome and can degrade PET at up to 70°C. This engineered whole-cell biocatalyst allowed a simultaneous high-level expression of LCC and conspicuous degradation of commercial PET films at 60°C. After 14 days incubation of a batch culture, more than 60% of the initial mass of a PET film (approximately 50 mg) was converted into soluble monomer feedstocks, indicating a markedly higher degradation performance than previously reported whole-cell-based PET biodegradation systems using mesophilic bacteria or microalgae. Our findings provide clear evidence that, compared to mesophilic species, thermophilic microbes are a more promising synthetic microbial chassis for developing future biodegradation processes of PET waste.

Translating New Synthetic Biology Advances for Biosensing Into the Earth and Environmental Sciences

The rapid diversification of synthetic biology tools holds promise in making some classically hard-to-solve environmental problems tractable. Here we review longstanding problems in the Earth and environmental sciences that could be addressed using engineered microbes as micron-scale sensors (biosensors). Biosensors can offer new perspectives on open questions, including understanding microbial behaviors in heterogeneous matrices like soils, sediments, and wastewater systems, tracking cryptic element cycling in the Earth system, and establishing the dynamics of microbe-microbe, microbe-plant, and microbe-material interactions. Before these new tools can reach their potential, however, a suite of biological parts and microbial chassis appropriate for environmental conditions must be developed by the synthetic biology community. This includes diversifying sensing modules to obtain information relevant to environmental questions, creating output signals that allow dynamic reporting from hard-to-image environmental materials, and tuning these sensors so that they reliably function long enough to be useful for environmental studies. Finally, ethical questions related to the use of synthetic biosensors in environmental applications are discussed.

Structures of ISCth4 transpososomes reveal the role of asymmetry in copy-out/paste-in DNA transposition

Copy-out/paste-in transposition is a major bacterial DNA mobility pathway. It contributes significantly to the emergence of antibiotic resistance, often by upregulating expression of downstream genes upon integration. Unlike other transposition pathways, it requires both asymmetric and symmetric strand transfer steps. Here, we report the first structural study of a copy-out/paste-in transposase and demonstrate its ability to catalyze all pathway steps in vitro. X-ray structures of ISCth4 transposase, a member of the IS256 family of insertion sequences, bound to DNA substrates corresponding to three sequential steps in the reaction reveal an unusual asymmetric dimeric transpososome. During transposition, an array of N-terminal domains binds a single transposon end while the catalytic domain moves to accommodate the varying substrates. These conformational changes control the path of DNA flanking the transposon end and the generation of DNA-binding sites. Our results explain the asymmetric outcome of the initial strand transfer and show how DNA binding is modulated by the asymmetric transposase to allow the capture of a second transposon end and to integrate a circular intermediate.

Construction of lactic acid overproducing Clostridium thermocellum through enhancement of lactate dehydrogenase expression

Rapid expansion of global market of lactic acid (LA) has prompted research towards cheaper and more eco-friendly strategies for its production. Nowadays, LA is produced mainly through fermentation of simple sugars or starchy biomass (e.g. corn) and its price is relatively high. Lignocellulose could be an advantageous alternative feedstock for LA production owing to its high abundance and low cost. However, the most effective natural producers of LA cannot directly ferment lignocellulose. So far, metabolic engineering aimed at developing microorganisms combining efficient LA production and cellulose hydrolysis has been generally based on introducing designer cellulase systems in natural LA producers. In the present study, the approach consisted in improving LA production in the natural cellulolytic bacterium Clostridium thermocellum DSM1313. The expression of the native lactate dehydrogenase was enhanced by functional replacement of its original promoter with stronger ones resulting in a 10-fold increase in specific activity, which resulted in a 2-fold increase of LA yield. It is known that eliminating allosteric regulation can also increase lactic acid production in C. thermocellum, however we were unable to insert strong promoters upstream of the de-regulated ldh gene. A strategy combining these regulations and inactivation of parasitic pathways appears essential for developing a homolactic C. thermocellum.

Transcriptomic analysis of a Clostridium thermocellum strain engineered to utilize xylose: responses to xylose versus cellobiose feeding

Clostridium (Ruminiclostridium) thermocellum is recognized for its ability to ferment cellulosic biomass directly, but it cannot naturally grow on xylose. Recently, C. thermocellum (KJC335) was engineered to utilize xylose through expressing a heterologous xylose catabolizing pathway. Here, we compared KJC335′s transcriptomic responses to xylose versus cellobiose as the primary carbon source and assessed how the bacteria adapted to utilize xylose. Our analyses revealed 417 differentially expressed genes (DEGs) with log₂ fold change (FC) >|1| and 106 highly DEGs (log₂ FC >|2|). Among the DEGs, two putative sugar transporters, cbpC and cbpD, were up-regulated, suggesting their contribution to xylose transport and assimilation. Moreover, the up-regulation of specific transketolase genes (tktAB) suggests the importance of this enzyme for xylose metabolism. Results also showed remarkable up-regulation of chemotaxis and motility associated genes responding to xylose feeding, as well as widely varying gene expression in those encoding cellulosomal enzymes. For the down-regulated genes, several were categorized in gene ontology terms oxidation–reduction processes, ATP binding and ATPase activity, and integral components of the membrane. This study informs potentially critical, enabling mechanisms to realize the conceptually attractive Next-Generation Consolidated BioProcessing approach where a single species is sufficient for the co-fermentation of cellulose and hemicellulose.

Metabolic pathway engineering: Perspectives and applications

BACKGROUND

Metabolic engineering aims at contriving microbes as biocatalysts for enhanced and cost-effective production of countless secondary metabolites. These secondary metabolites can be treated as the resources of industrial chemicals, pharmaceuticals and fuels. Plants are also crucial targets for metabolic engineers to produce necessary secondary metabolites. Metabolic engineering of both microorganism and plants also contributes towards drug discovery. In order to implement advanced metabolic engineering techniques efficiently, metabolic engineers should have detailed knowledge about cell physiology and metabolism. Principle behind methodologies: Genome-scale mathematical models of integrated metabolic, signal transduction, gene regulatory and protein-protein interaction networks along with experimental validation can provide such knowledge in this context. Incorporation of omics data into these models is crucial in the case of drug discovery. Inverse metabolic engineering and metabolic control analysis (MCA) can help in developing such models. Artificial intelligence methodology can also be applied for efficient and accurate metabolic engineering.

CONCLUSION

In this review, we discuss, at the beginning, the perspectives of metabolic engineering and its application on microorganism and plant leading to drug discovery. At the end, we elaborate why inverse metabolic engineering and MCA are closely related to modern metabolic engineering. In addition, some crucial steps ensuring efficient and optimal metabolic engineering strategies have been discussed. Moreover, we explore the use of genomics data for the activation of silent metabolic clusters and how it can be integrated with metabolic engineering. Finally, we exhibit a few applications of artificial intelligence to metabolic engineering.

Methods for Metabolic Engineering of Thermoanaerobacterium saccharolyticum

In this work, we describe genetic tools and techniques for engineering Thermoanaerobacterium saccharolyticum. In particular, the T. saccharolyticum transformation protocol and the methods for selecting for transformants are described. Methods for determining strain phenotypes are also presented.

Development of both type I-B and type II CRISPR/Cas genome editing systems in the cellulolytic bacterium Clostridium thermocellum

The robust lignocellulose-solubilizing activity of C. thermocellum makes it a top candidate for consolidated bioprocessing for biofuel production. Genetic techniques for C. thermocellum have lagged behind model organisms thus limiting attempts to improve biofuel production. To improve our ability to engineer C. thermocellum, we characterized a native Type I-B and heterologous Type II Clustered Regularly-Interspaced Short Palindromic Repeat (CRISPR)/cas (CRISPR associated) systems. We repurposed the native Type I-B system for genome editing. We tested three thermophilic Cas9 variants (Type II) and found that GeoCas9, isolated from Geobacillus stearothermophilus, is active in C. thermocellum. We employed CRISPR-mediated homology directed repair to introduce a nonsense mutation into pyrF. For both editing systems, homologous recombination between the repair template and the genome appeared to be the limiting step. To overcome this limitation, we tested three novel thermophilic recombinases and demonstrated that exo/beta homologs, isolated from Acidithiobacillus caldus, are functional in C. thermocellum. For the Type I-B system an engineered strain, termed LL1586, yielded 40% genome editing efficiency at the pyrF locus and when recombineering machinery was expressed this increased to 71%. For the Type II GeoCas9 system, 12.5% genome editing efficiency was observed and when recombineering machinery was expressed, this increased to 94%. By combining the thermophilic CRISPR system (either Type I-B or Type II) with the recombinases, we developed a new tool that allows for efficient CRISPR editing. We are now poised to enable CRISPR technologies to better engineer C. thermocellum for both increased lignocellulose degradation and biofuel production.

Clostridium thermocellum: A microbial platform for high-value chemical production from lignocellulose

Second generation biorefining, namely fermentation processes based on lignocellulosic feedstocks, has attracted tremendous interest (owing to the large availability and low cost of this biomass) as a strategy to produce biofuels and commodity chemicals that is an alternative to oil refining. However, the innate recalcitrance of lignocellulose has slowed progress toward economically viable processes. Consolidated bioprocessing (CBP), i.e., single-step fermentation of lignocellulose may dramatically reduce the current costs of 2nd generation biorefining. Metabolic engineering has been used as a tool to develop improved microbial strains supporting CBP. Clostridium thermocellum is among the most efficient cellulose degraders isolated so far and one of the most promising host organisms for application of CBP. The development of efficient and reliable genetic tools has allowed significant progress in metabolic engineering of this strain aimed at expanding the panel of growth substrates and improving the production of a number of commodity chemicals of industrial interest such as ethanol, butanol, isobutanol, isobutyl acetate and lactic acid. The present review aims to summarize recent developments in metabolic engineering of this organism which currently represents a reference model for the development of biocatalysts for 2nd generation biorefining.

Expression and purification of affinity-tagged variants of the photochemical reaction center from Heliobacterium modesticaldum

The heliobacterial photochemical reaction center (HbRC) from the chlorophototrophic Firmicutes bacterium Heliobacterium modesticaldum is the only homodimeric type I RC whose structure is known. Using genetic techniques recently established in our lab, we have developed a rapid heterologous expression system for the HbRC core polypeptide PshA. Our system relies on rescue of the non-chlorophototrophic ∆pshA::cbp2p-aph3 strain of Hbt. modesticaldum by expression of a heterologous pshA gene from a replicating shuttle vector. In addition, we constructed two tagged variants of PshA, one with an N-terminal octahistidine tag and one with an internal hexahistidine tag, which facilitate rapid purification of pure, active HbRC cores in milligram quantities. We constructed a suite of shuttle vectors bearing untagged or tagged versions of pshA driven by various promoters. Surprisingly, we found that the eno and gapDH_2 promoters from Clostridium thermocellum drive better expression of pshA than fragments of DNA derived from the region upstream of the pshA locus on the Hbt. modesticaldum genome. This "pshA rescue" strategy also provided a useful window into how Hbt. modesticaldum regulates pigment synthesis and growth rate when chlorophototrophic output decreases.

Using the Endogenous CRISPR-Cas System of Heliobacterium modesticaldum To Delete the Photochemical Reaction Center Core Subunit Gene

In Heliobacterium modesticaldum, as in many Firmicutes, deleting genes by homologous recombination using standard techniques has been extremely difficult. The cells tend to integrate the introduced plasmid into the chromosome by a single recombination event rather than perform the double recombination required to replace the targeted locus. Transformation with a vector containing only a homologous recombination template for replacement of the photochemical reaction center gene pshA produced colonies with multiple genotypes, rather than a clean gene replacement. To address this issue, we required an additional means of selection to force a clean gene replacement. In this study, we report the genetic structure of the type I-A and I-E CRISPR-Cas systems from H. modesticaldum, as well as methods to leverage the type I-A system for genome editing. In silico analysis of the CRISPR spacers revealed a potential consensus protospacer adjacent motif (PAM) required for Cas3 recognition, which was then tested using an in vivo interference assay. Introduction of a homologous recombination plasmid that carried a miniature CRISPR array targeting sequences in pshA (downstream of a naturally occurring PAM sequence) produced nonphototrophic transformants with clean replacements of the pshA gene with ∼80% efficiency. Mutants were confirmed by PCR, sequencing, optical spectroscopy, and growth characteristics. This methodology should be applicable to any genetic locus in the H. modesticaldum genome.IMPORTANCE The heliobacteria are the only phototrophic members of the largely Gram-positive phylum Firmicutes, which contains medically and industrially important members, such as Clostridium difficile and Clostridium acetobutylicum Heliobacteria are of interest in the study of photosynthesis because their photosynthetic system is unique and the simplest known. Since their discovery in the early 1980s, work on the heliobacteria has been hindered by the lack of a genetic transformation system. The problem of introducing foreign DNA into these bacteria has been recently rectified by our group; however, issues still remained for efficient genome editing. The significance of this work is that we have characterized the endogenous type I CRISPR-Cas system in the heliobacteria and leveraged it to assist in genome editing. Using the CRISPR-Cas system allowed us to isolate transformants with precise replacement of the pshA gene encoding the main subunit of the photochemical reaction center.

Metabolic engineering of Clostridium thermocellum for n-butanol production from cellulose

BACKGROUND

Biofuel production from plant cell walls offers the potential for sustainable and economically attractive alternatives to petroleum-based products. In particular, Clostridium thermocellum is a promising host for consolidated bioprocessing (CBP) because of its strong native ability to ferment cellulose.

RESULTS

We tested 12 different enzyme combinations to identify an n-butanol pathway with high titer and thermostability in C. thermocellum. The best producing strain contained the thiolase-hydroxybutyryl-CoA dehydrogenase-crotonase (Thl-Hbd-Crt) module from Thermoanaerobacter thermosaccharolyticum, the trans-enoyl-CoA reductase (Ter) enzyme from Spirochaeta thermophila and the butyraldehyde dehydrogenase and alcohol dehydrogenase (Bad-Bdh) module from Thermoanaerobacter sp. X514 and was able to produce 88 mg/L n-butanol. The key enzymes from this combination were further optimized by protein engineering. The Thl enzyme was engineered by introducing homologous mutations previously identified in Clostridium acetobutylicum. The Hbd and Ter enzymes were engineered for changes in cofactor specificity using the CSR-SALAD algorithm to guide the selection of mutations. The cofactor engineering of Hbd had the unexpected side effect of also increasing activity by 50-fold.

CONCLUSIONS

Here we report engineering C. thermocellum to produce n-butanol. Our initial pathway designs resulted in low levels (88 mg/L) of n-butanol production. By engineering the protein sequence of key enzymes in the pathway, we increased the n-butanol titer by 2.2-fold. We further increased n-butanol production by adding ethanol to the growth media. By combining all these improvements, the engineered strain was able to produce 357 mg/L of n-butanol from cellulose within 120 h.

Expressing the Thermoanaerobacterium saccharolyticum pforA in engineered Clostridium thermocellum improves ethanol production

BACKGROUND

Clostridium thermocellum has been the subject of multiple metabolic engineering strategies to improve its ability to ferment cellulose to ethanol, with varying degrees of success. For ethanol production in C. thermocellum, the conversion of pyruvate to acetyl-CoA is catalyzed primarily by the pyruvate ferredoxin oxidoreductase (PFOR) pathway. Thermoanaerobacterium saccharolyticum, which was previously engineered to produce ethanol of high yield (> 80%) and titer (70 g/L), also uses a pyruvate ferredoxin oxidoreductase, pforA, for ethanol production.

RESULTS

Here, we introduced the T. saccharolyticum pforA and ferredoxin into C. thermocellum. The introduction of pforA resulted in significant improvements to ethanol yield and titer in C. thermocellum grown on 50 g/L of cellobiose, but only when four other T. saccharolyticum genes (adhA, nfnA, nfnB, and adhEG544D ) were also present. T. saccharolyticum ferredoxin did not have any observable impact on ethanol production. The improvement to ethanol production was sustained even when all annotated native C. thermocellum pfor genes were deleted. On high cellulose concentrations, the maximum ethanol titer achieved by this engineered C. thermocellum strain from 100 g/L Avicel was 25 g/L, compared to 22 g/L for the reference strain, LL1319 (adhA(Tsc)-nfnAB(Tsc)-adhEG544D (Tsc)) under similar conditions. In addition, we also observed that deletion of the C. thermocellum pfor4 results in a significant decrease in isobutanol production.

CONCLUSIONS

Here, we demonstrate that the pforA gene can improve ethanol production in C. thermocellum as part of the T. saccharolyticum pyruvate-to-ethanol pathway. In our previous strain, high-yield (~ 75% of theoretical) ethanol production could be achieved with at most 20 g/L substrate. In this strain, high-yield ethanol production can be achieved up to 50 g/L substrate. Furthermore, the introduction of pforA increased the maximum titer by 14%.

iPro70-FMWin: identifying Sigma70 promoters using multiple windowing and minimal features

In bacterial DNA, there are specific sequences of nucleotides called promoters that can bind to the RNA polymerase. Sigma70 ([Formula: see text]) is one of the most important promoter sequences due to its presence in most of the DNA regulatory functions. In this paper, we identify the most effective and optimal sequence-based features for prediction of [Formula: see text] promoter sequences in a bacterial genome. We used both short-range and long-range DNA sequences in our proposed method. A very small number of effective features are selected from a large number of the extracted features using multi-window of different sizes within the DNA sequences. We call our prediction method iPro70-FMWin and made it freely accessible online via a web application established at http://ipro70.pythonanywhere.com/server for the sake of convenience of the researchers. We have tested our method using a standard benchmark dataset. In the experiments, iPro70-FMWin has achieved an area under the curve of the receiver operating characteristic and accuracy of 0.959 and 90.57%, respectively, which significantly outperforms the state-of-the-art predictors.

Deletion of the Clostridium thermocellum recA gene reveals that it is required for thermophilic plasmid replication but not plasmid integration at homologous DNA sequences

A limitation to the engineering of cellulolytic thermophiles is the availability of functional, thermostable (≥ 60 °C) replicating plasmid vectors for rapid expression and testing of genes that provide improved or novel fuel molecule production pathways. A series of plasmid vectors for genetic manipulation of the cellulolytic thermophile Caldicellulosiruptor bescii has recently been extended to Clostridium thermocellum, another cellulolytic thermophile that very efficiently solubilizes plant biomass and produces ethanol. While the C. bescii pBAS2 replicon on these plasmids is thermostable, the use of homologous promoters, signal sequences and genes led to undesired integration into the bacterial chromosome, a result also observed with less thermostable replicating vectors. In an attempt to overcome undesired plasmid integration in C. thermocellum, a deletion of recA was constructed. As expected, C. thermocellum ∆recA showed impaired growth in chemically defined medium and an increased susceptibility to UV damage. Interestingly, we also found that recA is required for replication of the C. bescii thermophilic plasmid pBAS2 in C. thermocellum, but it is not required for replication of plasmid pNW33N. In addition, the C. thermocellum recA mutant retained the ability to integrate homologous DNA into the C. thermocellum chromosome. These data indicate that recA can be required for replication of certain plasmids, and that a recA-independent mechanism exists for the integration of homologous DNA into the C. thermocellum chromosome. Understanding thermophilic plasmid replication is not only important for engineering of these cellulolytic thermophiles, but also for developing genetic systems in similar new potentially useful non-model organisms.

iPromoter-FSEn: Identification of bacterial σ70 promoter sequences using feature subspace based ensemble classifier

Sigma promoter sequences in bacterial genomes are important due to their role in transcription initiation. Sigma 70 is one of the most important and crucial sigma factors. In this paper, we address the problem of identification of σ⁷⁰ promoter sequences in bacterial genome. We propose iPromoter-FSEn, a novel predictor for identification of σ⁷⁰ promoter sequences. Our proposed method is based on a feature subspace based ensemble classifier. A large set of of features extracted from the sequence of nucleotides are divided into subsets and each subset is given to individual single classifiers to learn. Based on the decisions of the ensemble an aggregate decision is made by the ensemble voting classifier. We tested our method on a standard benchmark dataset extracted from experimentally validated results. Experimental results shows that iPromoter-FSEn significantly improves over the state-of-the art σ⁷⁰ promoter sequence predictors. The accuracy and area under receiver operating characteristic curve of iPromoter-FSEn are 86.32% and 0.9319 respectively. We have also made our method readily available for use as an web application from: http://ipromoterfsen.pythonanywhere.com/server.

Building a genome engineering toolbox in nonmodel prokaryotic microbes

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g., sunlight, CO₂ , and nonfood biomass) into biofuels and bioproducts at sufficient titers and costs. For model microbes, such as Escherichia coli, advances in DNA reading and writing technologies are driving the adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks, such as photosynthesis, autotrophic growth, and cellulose degradation, have very few, if any, genetic tools for metabolic engineering. Therefore, it is important to develop "design rules" for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and the available genetic tools to expand our ability to genetically engineer nonmodel systems.

A Genetic System for the Thermophilic Acetogenic Bacterium Thermoanaerobacter kivui

Thermoanaerobacter kivui is one of the very few thermophilic acetogenic microorganisms. It grows optimally at 66°C on sugars but also lithotrophically with H2 + CO2 or with CO, producing acetate as the major product. While a genome-derived model of acetogenesis has been developed, only a few physiological or biochemical experiments regarding the function of important enzymes in carbon and energy metabolism have been carried out. To address this issue, we developed a method for targeted markerless gene deletions and for integration of genes into the genome of T. kivui The strain naturally took up plasmid DNA in the exponential growth phase, with a transformation frequency of up to 3.9 × 10-6 A nonreplicating plasmid and selection with 5-fluoroorotate was used to delete the gene encoding the orotate phosphoribosyltransferase (pyrE), resulting in a ΔpyrE uracil-auxotrophic strain, TKV002. Reintroduction of pyrE on a plasmid or insertion of pyrE into different loci within the genome restored growth without uracil. We subsequently studied fructose metabolism in T. kivui The gene fruK (TKV_c23150) encoding 1-phosphofructosekinase (1-PFK) was deleted, using pyrE as a selective marker via two single homologous recombination events. The resulting ΔfruK strain, TKV003, did not grow on fructose; however, growth on glucose (or on mannose) was unaffected. The combination of pyrE as a selective marker and the natural competence of the strain for DNA uptake will be the basis for future studies on CO2 reduction and energy conservation and their regulation in this thermophilic acetogenic bacterium.IMPORTANCE Acetogenic bacteria are currently the focus of research toward biotechnological applications due to their potential for de novo synthesis of carbon compounds such as acetate, butyrate, or ethanol from H2 + CO2 or from synthesis gas. Based on available genome sequences and on biochemical experiments, acetogens differ in their energy metabolism. Thus, there is an urgent need to understand the carbon and electron flows through the Wood-Ljungdahl pathway and their links to energy conservation, which requires genetic manipulations such as deletion or overexpression of genes encoding putative key enzymes. Unfortunately, genetic systems have been reported for only a few acetogenic bacteria. Here, we demonstrate proof of concept for the genetic modification of the thermophilic acetogenic species Thermoanaerobacter kivui The genetic system will be used to study genes involved in biosynthesis and energy metabolism, and may further be applied to metabolically engineer T. kivui to produce fuels and chemicals.

Development of an efficient host-vector system of Ruminiclostridium josui

Although Ruminiclostridium josui (formerly Clostridium josui), a strictly anaerobic mesophilic cellulolytic bacterium, is a promising candidate for biomass utilization via consolidated bioprocessing, its host-vector system has not yet been established. The existence of a restriction and modification system is a significant barrier to the transformation of R. josui. Here, we partially purified restriction endonuclease RjoI from R. josui cell extract using column chromatography. Further characterization showed that RjoI is an isoschizomer of DpnI, recognizing the sequence 5'-G^met ATC-3', where the A nucleotide is Dam-methylated. RjoI cleaved the recognition sequence between the A and T nucleotides, producing blunt ends. We then successfully introduced plasmids prepared from Escherichia coli C2925 (dam^- /dcm^- ) into R. josui by electroporation. The highest transformation efficiency of 6.6 × 10³ transformants/μg of DNA was obtained using a square-wave pulse (750 V, 1 ms). When the R. josui cel48A gene, devoid of the dockerin-encoding region, cloned into newly developed plasmid pKKM801 was introduced into R. josui, a truncated form of RjCel48A, RjCel48AΔdoc, was detected in the culture supernatant but not in the intracellular fraction. This is the first report on the establishment of fundamental technology for molecular breeding of R. josui.

Challenges and Advances for Genetic Engineering of Non-model Bacteria and Uses in Consolidated Bioprocessing

Metabolic diversity in microorganisms can provide the basis for creating novel biochemical products. However, most metabolic engineering projects utilize a handful of established model organisms and thus, a challenge for harnessing the potential of novel microbial functions is the ability to either heterologously express novel genes or directly utilize non-model organisms. Genetic manipulation of non-model microorganisms is still challenging due to organism-specific nuances that hinder universal molecular genetic tools and translatable knowledge of intracellular biochemical pathways and regulatory mechanisms. However, in the past several years, unprecedented progress has been made in synthetic biology, molecular genetics tools development, applications of omics data techniques, and computational tools that can aid in developing non-model hosts in a systematic manner. In this review, we focus on concerns and approaches related to working with non-model microorganisms including developing molecular genetics tools such as shuttle vectors, selectable markers, and expression systems. In addition, we will discuss: (1) current techniques in controlling gene expression (transcriptional/translational level), (2) advances in site-specific genome engineering tools [homologous recombination (HR) and clustered regularly interspaced short palindromic repeats (CRISPR)], and (3) advances in genome-scale metabolic models (GSMMs) in guiding design of non-model species. Application of these principles to metabolic engineering strategies for consolidated bioprocessing (CBP) will be discussed along with some brief comments on foreseeable future prospects.

The ethanol pathway from Thermoanaerobacterium saccharolyticum improves ethanol production in Clostridium thermocellum

Clostridium thermocellum ferments cellulose, is a promising candidate for ethanol production from cellulosic biomass, and has been the focus of studies aimed at improving ethanol yield. Thermoanaerobacterium saccharolyticum ferments hemicellulose, but not cellulose, and has been engineered to produce ethanol at high yield and titer. Recent research has led to the identification of four genes in T. saccharolyticum involved in ethanol production: adhE, nfnA, nfnB and adhA. We introduced these genes into C. thermocellum and observed significant improvements to ethanol yield, titer, and productivity. The four genes alone, however, were insufficient to achieve in C. thermocellum the ethanol yields and titers observed in engineered T. saccharolyticum strains, even when combined with gene deletions targeting hydrogen production. This suggests that other parts of T. saccharolyticum metabolism may also be necessary to reproduce the high ethanol yield and titer phenotype in C. thermocellum.

Efficient whole-cell-catalyzing cellulose saccharification using engineered Clostridium thermocellum

BACKGROUND

Cost-efficient saccharification is one of the main bottlenecks for industrial lignocellulose conversion. Clostridium thermocellum naturally degrades lignocellulose efficiently using the cellulosome, a multiprotein supermolecular complex, and thus can be potentially used as a low-cost catalyst for lignocellulose saccharification. The industrial use of C. thermocellum is restrained due largely to the inhibition of the hydrolysate cellobiose to its cellulosome. Although the supplementation of beta-glucosidase may solve the problem, the production of the enzymes greatly complicates the process and may also increase the cost of saccharification.

RESULTS

To conquer the feedback inhibition and establish an efficient whole-cell catalyst for highly efficient cellulose saccharification, we constructed a recombinant strain of C. thermocellum ∆pyrF::CaBglA which produced a secretory exoglucanase CelS-bearing heterologous BGL using a newly developed seamless genome editing system. Without the extra addition of enzymes, the relative saccharification level of ∆pyrF::CaBglA was stimulated by over twofolds compared to its parent strain ∆pyrF through a two-stage saccharification process with 100 g/L Avicel as the carbon source. The production of reducing sugars and the relative saccharification level were further enhanced to 490 mM and 79.4%, respectively, with increased cell density.

CONCLUSIONS

The high cellulose-degrading ability and sugar productivity suggested that the whole-cell-catalysis strategy for cellulose saccharification is promising, and the C. thermocellum strain ∆pyrF::CaBglA could be potentially used as an efficient whole-cell catalyst for industrial cellulose saccharification.

Deletion of Type I glutamine synthetase deregulates nitrogen metabolism and increases ethanol production in Clostridium thermocellum

Clostridium thermocellum rapidly deconstructs cellulose and ferments resulting hydrolysis products into ethanol and other products, and is thus a promising platform organism for the development of cellulosic biofuel production via consolidated bioprocessing. While recent metabolic engineering strategies have targeted eliminating canonical fermentation products (acetate, lactate, formate, and H₂), C. thermocellum also secretes amino acids, which has limited ethanol yields in engineered strains to approximately 70% of the theoretical maximum. To investigate approaches to decrease amino acid secretion, we attempted to reduce ammonium assimilation by deleting the Type I glutamine synthetase (glnA) in an essentially wild type strain of C. thermocellum. Deletion of glnA reduced levels of secreted valine and total amino acids by 53% and 44% respectively, and increased ethanol yields by 53%. RNA-seq analysis revealed that genes encoding the RNF-complex were more highly expressed in ΔglnA and may have a role in improving NADH-availability for ethanol production. While a significant up-regulation of genes involved in nitrogen assimilation and urea uptake suggested that deletion of glnA induces a nitrogen starvation response, metabolomic analysis showed an increase in intracellular glutamine levels indicative of nitrogen-rich conditions. We propose that deletion of glnA causes deregulation of nitrogen metabolism, leading to overexpression of nitrogen metabolism genes and, in turn, elevated glutamine levels. Here we demonstrate that perturbation of nitrogen assimilation is a promising strategy to redirect flux from the production of nitrogenous compounds toward biofuels in C. thermocellum.

Expression of a heat-stable NADPH-dependent alcohol dehydrogenase from Thermoanaerobacter pseudethanolicus 39E in Clostridium thermocellum 1313 results in increased hydroxymethylfurfural resistance

BACKGROUND

Resistance to deconstruction is a major limitation to the use of lignocellulosic biomass as a substrate for the production of fuels and chemicals. Consolidated bioprocessing (CBP), the use of microbes for the simultaneous hydrolysis of lignocellulose into soluble sugars and fermentation of the resulting sugars to products of interest, is a potential solution to this obstacle. The pretreatment of plant biomass, however, releases compounds that are inhibitory to the growth of microbes used for CBP.

RESULTS

Heterologous expression of the Thermoanaerobacter pseudethanolicus 39E bdhA gene, that encodes an alcohol dehydrogenase, in Clostridium thermocellum significantly increased resistance to furan derivatives at concentrations found in acid-pretreated biomass. The mechanism of detoxification of hydroxymethylfurfural was shown to be primarily reduction using NADPH as the cofactor. In addition, we report the construction of new expression vectors for homologous and heterologous expression in C. thermocellum. These vectors use regulatory signals from both C. bescii (the S-layer promoter) and C. thermocellum (the enolase promoter) shown to efficiently drive expression of the BdhA enzyme.

CONCLUSIONS

Toxic compounds present in lignocellulose hydrolysates that inhibit cell growth and product formation are obstacles to the commercialization of fuels and chemicals from biomass. Expression of genes that reduce the effect of these inhibitors, such as furan derivatives, will serve to enable commercial processes using plant biomass for the production of fuels and chemicals.

Improved growth rate in Clostridium thermocellum hydrogenase mutant via perturbed sulfur metabolism

BACKGROUND

Metabolic engineering is a commonly used approach to develop organisms for an industrial function, but engineering aimed at improving one phenotype can negatively impact other phenotypes. This lack of robustness can prove problematic. Cellulolytic bacterium Clostridium thermocellum is able to rapidly ferment cellulose to ethanol and other products. Recently, genes involved in H2 production, including the hydrogenase maturase hydG and NiFe hydrogenase ech, were deleted from the chromosome of C. thermocellum. While ethanol yield increased, the growth rate of ΔhydG decreased substantially compared to wild type.

RESULTS

Addition of 5 mM acetate to the growth medium improved the growth rate in C. thermocellum ∆hydG, whereas wild type remained unaffected. Transcriptomic analysis of the wild type showed essentially no response to the addition of acetate. However, in C. thermocellum ΔhydG, 204 and 56 genes were significantly differentially regulated relative to wild type in the absence and presence of acetate, respectively. Genes, Clo1313_0108-0125, which are predicted to encode a sulfate transport system and sulfate assimilatory pathway, were drastically upregulated in C. thermocellum ΔhydG in the presence of added acetate. A similar pattern was seen with proteomics. Further physiological characterization demonstrated an increase in sulfide synthesis and elimination of cysteine consumption in C. thermocellum ΔhydG. Clostridium thermocellum ΔhydGΔech had a higher growth rate than ΔhydG in the absence of added acetate, and a similar but less pronounced transcriptional and physiological effect was seen in this strain upon addition of acetate.

CONCLUSIONS

Sulfur metabolism is perturbed in C. thermocellum ΔhydG strains, likely to increase flux through sulfate reduction to act either as an electron sink to balance redox reactions or to offset an unknown deficiency in sulfur assimilation.

Promiscuous plasmid replication in thermophiles: Use of a novel hyperthermophilic replicon for genetic manipulation of Clostridium thermocellum at its optimum growth temperature

Clostridium thermocellum is a leading candidate for the consolidated bioprocessing of lignocellulosic biomass for the production of fuels and chemicals. A limitation to the engineering of this strain is the availability of stable replicating plasmid vectors for homologous and heterologous expression of genes that provide improved and/or novel pathways for fuel production. Current vectors relay on replicons from mesophilic bacteria and are not stable at the optimum growth temperature of C. thermocellum. To develop more thermostable genetic tools for C. thermocellum, we constructed vectors based on the hyperthermophilic Caldicellulosiruptor bescii replicon pBAS2. Autonomously replicating shuttle vectors based on pBAS2 reproducibly transformed C. thermocellum at 60 °C and were maintained in multiple copy. Promoters, selectable markers and plasmid replication proteins from C. bescii were functional in C. thermocellum. Phylogenetic analyses of the proteins contained on pBAS2 revealed that the replication initiation protein RepL is unique among thermophiles. These results suggest that pBAS2 may be a broadly useful replicon for other thermophilic Firmicutes.

Development of a plasmid-based expression system in Clostridium thermocellum and its use to screen heterologous expression of bifunctional alcohol dehydrogenases (adhEs)

Clostridium thermocellum is a promising candidate for ethanol production from cellulosic biomass, but requires metabolic engineering to improve ethanol yield. A key gene in the ethanol production pathway is the bifunctional aldehyde and alcohol dehydrogenase, adhE. To explore the effects of overexpressing wild-type, mutant, and exogenous adhEs, we developed a new expression plasmid, pDGO144, that exhibited improved transformation efficiency and better gene expression than its predecessor, pDGO-66. This new expression plasmid will allow for many other metabolic engineering and basic research efforts in C. thermocellum. As proof of concept, we used this plasmid to express 12 different adhE genes (both wild type and mutant) from several organisms. Ethanol production varied between clones immediately after transformation, but tended to converge to a single value after several rounds of serial transfer. The previously described mutant C. thermocellum D494G adhE gave the best ethanol production, which is consistent with previously published results.

Engineering electron metabolism to increase ethanol production in Clostridium thermocellum

The NfnAB (NADH-dependent reduced ferredoxin: NADP⁺ oxidoreductase) and Rnf (ion-translocating reduced ferredoxin: NAD⁺ oxidoreductase) complexes are thought to catalyze electron transfer between reduced ferredoxin and NAD(P)⁺. Efficient electron flux is critical for engineering fuel production pathways, but little is known about the relative importance of these enzymes in vivo. In this study we investigate the importance of the NfnAB and Rnf complexes in Clostridium thermocellum for growth on cellobiose and Avicel using gene deletion, enzyme assays, and fermentation product analysis. The NfnAB complex does not seem to play a major role in metabolism, since deletion of nfnAB genes had little effect on the distribution of fermentation products. By contrast, the Rnf complex appears to play an important role in ethanol formation. Deletion of rnf genes resulted in a decrease in ethanol formation. Overexpression of rnf genes resulted in an increase in ethanol production of about 30%, but only in strains where the hydG hydrogenase maturation gene was also deleted.