Proteomic analysis of differential protein expression in Acidithiobacillus ferrooxidans cultivated in high potassium concentration

Engineered microbes as effective tools for the remediation of polyaromatic aromatic hydrocarbons and heavy metals

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

Biological approaches practised using genetically engineered microbes for a sustainable environment: A review

Conventional methods used to remediate toxic substances from the environment have failed drastically, and thereby, advancement in newer remediation techniques can be one of the ways to improve the quality of bioremediation. The increased environmental pollution led to the exploration of microorganisms and construction of genetically engineered microbes (GEMs) for pollution abatement through bioremediation. The present review deals with the successful bioremediation techniques and approaches practised using genetically modified or engineered microbes. In the present scenario, physical and chemical strategies have been practised for the remediation of domestic and industrial wastes but these techniques are expensive and toxic to the environment. Involving engineered microbes can provide a much safer and cost effective strategy in comparison with the other techniques. With the aid of biotechnology and genetic engineering, GEMs are designed by transforming microbes with a more potent protein to overexpress the desired character. GEMs such as bacteria, fungi and algae have been used to degrade oil spills, camphor, hexane, naphthalene, toluene, octane, xylene, halobenzoates, trichloroethylene etc. These engineered microbes are more potent than the natural strains and have higher degradative capacities with quick adaptation for various pollutants as substrates or cometabolize. The road ahead for the implementation of genetic engineering to produce such organisms for the welfare of the environment and finally, public health is indeed long and worthwhile.

Iron and sulfur oxidation pathways of Acidithiobacillus ferrooxidans

Acidithiobacillus ferrooxidans is a gram-negative, autotrophic and rod-shaped bacterium. It can gain energy through the oxidation of Fe(II) and reduced inorganic sulfur compounds for bacterial growth when oxygen is sufficient. It can be used for bio-leaching and bio-oxidation and contributes to the geobiochemical circulation of metal elements and nutrients in acid mine drainage environments. The iron and sulfur oxidation pathways of A. ferrooxidans play key roles in bacterial growth and survival under extreme circumstances. Here, the electrons transported through the thermodynamically favourable pathway for the reduction to H₂O (downhill pathway) and against the redox potential gradient reduce to NAD(P)(H) (uphill pathway) during the oxidation of Fe(II) were reviewed, mainly including the electron transport carrier, relevant operon and regulation of its expression. Similar to the electron transfer pathway, the sulfur oxidation pathway of A. ferrooxidans, related genes and operons, sulfur oxidation mechanism and sulfur oxidase system are systematically discussed.

A novel approach for recovery of metals from waste printed circuit boards and simultaneous removal of iron from steel pickling waste liquor by two-step hydrometallurgical method

Waste printed circuit boards (WPCBs) and steel pickling waste liquor (SPWL) have received extensive attention in recent years because of its harmfulness and resource. In this work, two-step leaching process was carried out by using SPWL as the leaching agent. A series of continuously domesticated bacteria were used for bioleaching and the bacterial strain was identified as Acidithiobacillus ferrooxidans (A. ferrooxidans) by 16S rDNA gene sequence analysis. The vast majority of the metals in WPCBs were recovered by two-step leaching, such as Cu, Pb, Zn, Sn, Al, Ni. Meanwhile, a large amount of iron was removed from SPWL, which greatly reduces the burden of the subsequent treatment. Pulp density and pH were optimized to achieve maximum recovery of copper and simultaneous removal of iron in bioleaching. It was found that the optimum conditions were pulp density 60 g/L and pH 0.5-1.0. Nearly 100% of copper was recovered and 51.94% of iron was removed under optimum conditions. The kinetic experiments showed that the rate of copper leaching was controlled by external diffusion rather than internal diffusion, because the acidic environment of the leachate prevented the formation of the precipitate and maintained it in a smaller size.

Differential regulation of proteins in rice (Oryza sativa L.) under iron deficiency

Sixty-three proteins were identified to be differentially accumulated due to iron deficiency in shoot and root. The importance of these proteins alterations on shoot physiology is discussed. Iron (Fe) is an essential micronutrient for plant growth and its accumulation affects the quality of edible plant organs. To investigate the adaptive mechanism of a Chinese rice variety grown under iron deficiency, proteins differentially accumulated in leaves and roots of Yangdao 6, an indica cultivar, under Fe deficiency growth condition, were profiled using a two-dimensional electrophoresis (2-DE) and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF/MS). The accumulations of seventy-three proteins were detected to be increased or decreased upon iron deficiency, and sixty-three of them were successfully identified. Among the sixty-three proteins, a total of forty proteins were identified in rice leaves, and twenty-three proteins were in roots. Most of these proteins are involved in photosynthesis, C metabolism, oxidative stress, Adenosine triphosphate synthesis, cell growth or signal transduction. The results provide a comprehensive way to understand, at the level of proteins, the adaptive mechanism used by rice shoots and roots under iron deficiency.

Metal resistance-related genes are differently expressed in response to copper and zinc ion in six Acidithiobacillus ferrooxidans strains

Metal resistance of acidophilic bacteria is very significant during bioleaching of copper ores since high concentration of metal is harmful to the growth of microorganisms. The resistance levels of six Acidithiobacillus ferrooxidans strains to 0.15 M copper and 0.2 M zinc were investigated, and eight metal resistance-related genes (afe-0022, afe-0326, afe-0329, afe-1143, afe-0602, afe-0603, afe-0604, and afe-1788) were sequenced and analyzed. The transcriptional expression levels of eight possible metal tolerance genes in six A. ferrooxidans strains exposed to 0.15 M Cu(2+) and 0.2 M Zn(2+) were determined by real-time quantitative PCR (RT-qPCR), respectively. The copper resistance levels of six A. ferrooxidans strains declined followed by DY26, DX5, DY15, GD-B, GD-0, and YTW. The zinc tolerance levels of six A. ferrooxidans strains exposed to 0.2 M Zn(2+) from high to low were YTW > GD-B > DY26 > GD-0 > DX5 > DY15. Seven metal tolerance-related genes all presented in the genome of six strains, except afe-0604. The metal resistance-related genes showed different transcriptional expression patterns in six A. ferrooxidans strains. The expression of gene afe-0326 and afe-0022 in six A. ferrooxidans strains in response to 0.15 M Cu(2+) showed the same trend with the resistance levels. The expression levels of genes afe-0602, afe-0603, afe-0604, and afe-1788 in six strains response to 0.2 M Zn(2+) did not show a clear correlation between the zinc tolerance levels of six strains. According to the results of RT-qPCR and bioinformatics analysis, the proteins encoded by afe-0022, afe-0326, afe-0329, and afe-1143 were related to Cu(2+) transport of A. ferrooxidans strains.