Upconversion fluorescence resonance energy transfer—a novel approach for sensitive detection of fluoroquinolones in water samples

Design of an Antigen-Triggered Nanobody-Based Fluorescence Probe for PET Immunoassay to Detect Quinalphos in Food Samples

Photoinduced electron-transfer (PET) immunoassay based on a fluorescence site-specifically labeled nanobody, also called mini Quenchbody (Q-body), exhibits extraordinary sensitivity and saves much time in the homogeneous noncompetitive mode and is therefore regarded as a valuable method. However, limited by the efficiency of both quenching and dequenching of the fluorescence signal before and after antigen binding associated with the PET principle, not all original nanobodies can be used as candidates for mini Q-bodies. Herein, with the anti-quinalphos nanobody 11A (Nb-11A) as the model, we, for the first time, adopt a strategy by combining X-ray structural analysis with site-directed mutagenesis to design and produce a mutant Nb-R29W, and then successfully generate a mini Q-body by labeling with ATTO520 fluorescein. Based on this, a novel PET immunoassay is established, which exhibits a limit of detection of 0.007 μg/mL with a detection time of only 15 min, 25-fold improved sensitivity, and faster by 5-fold compared to the competitive immunoassay. Meanwhile, the recovery test of vegetable samples and validation by the standard ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) both demonstrated that the established PET immunoassay is a novel, sensitive, and accurate detection method for quinalphos. Ultimately, the findings of this work will provide valuable insights into the development of triggered PET fluorescence probes by using existing antibody resources.

Gold@Carbon Quantum Dots Nanocomposites Based Two-In-One Sensor: A Novel Approach for Sensitive Detection of Aminoglycosides Antibiotics in Food Samples

Antibiotics are life-saving drugs for humans, but their unwanted use leads to antibacterial resistance (ABR) and causes serious health problems. The excess of these antibiotics entered to the food chain and caused food contamination. Here, Au@CQDs nanocomposites (NCs) was used as a two-in-one sensor to detect two antibiotics. The color change of AuNCs and fluorescence resonance energy transfer are two distance-dependent phenomena used as sensing mechanisms. In the sensing process, Au@CQDs NCs change their color, enhancing the fluorescence intensity of NCs in the presence of Gentamicin (GENTA) and Kanamycin (KMC) antibiotics. The limit of detection of 116 nM and 133 nM for GENTA and 195 nM and 120 nM for KMC have been achieved with colorimetric and fluorimetric readout, respectively. The practicality of the reported sensor was evaluated in real spiked samples and showed excellent recovery efficiency. Therefore this two-in-one sensor can be used for the food monitoring system.

Upconversion Nanomaterials in Bioimaging and Biosensor Applications and Their Biological Response

In recent decades, upconversion nanomaterials (UCNMs) have attracted considerable research interest because of their unique optical properties, such as large anti-Stokes shifts, sharp emissions, non-photobleaching, and long lifetime. These unique properties make them ideal candidates for unified applications in biomedical fields, including drug delivery, bioimaging, biosensing, and photodynamic therapy for specific cancers. This review describes the general mechanisms of upconversion, synthesis methods, and potential applications in biology and their biological responses. Additionally, the biological toxicity of UCNMs is explained and summarized with the associated intracellular association mechanisms. Finally, the prospects and future challenges of UCNMs at the clinical level in biological applications are described, along with a summary of opportunity for biological as well as clinical applications of UCNMs.

A novel terbium (III) and aptamer-based probe for label-free detection of three fluoroquinolones in honey and water samples

Fluoroquinolones, a family of synthetic broad-spectrum antibiotics, are widely used in clinical medicine, farm animals and aquaculture. Residues of fluoroquinolones in samples have attracted much attention because of growing food safety and public health concerns. Here, a novel Tb³⁺ ion-enrofloxacin aptamer coordination probe was prepared to develop a sensitive and rapid label-free fluorescence assay for specific detection three fluoroquinolones. In presence of the target, Tb³⁺ ion- enrofloxacin aptamer probe specifically bound with enrofloxacin, norfloxacin and ciprofloxacin, leading to a sharp increase in fluorescence emission of the probe. Under the optimized conditions, fluorescence increased linearly in the 1.0-100.0 ng/mL range for the three fluoroquinolones, with 0.053 ng/mL limit of detection for ciprofloxacin, 0.020 ng/mL limit of detection for norfloxacin and 0.061 ng/mL limit of detection for enrofloxacin. Satisfactory recovery (80.10-102.48%) in spiked honey and water samples were obtained for the three fluoroquinolones with relative standard deviations between 0.21% and 5.44% (n = 3).

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

Fiberoptic-Coupled Spectrofluorometer with Array Detection as a Process Analytical Chemistry Tool for Continuous Flow Monitoring of Fluoroquinolone Antibiotics

Nowadays, there is an increasing need for sensitive real-time measurements of various analytes and monitoring of industrial products and environmental processes. Herein, we describe a fluorescence spectrometer in continuous flow mode in which the sample is fed to the flow cell using a peristaltic pump. The excitation beam is introduced to the sample chamber by an optical fiber. The fluorescence emitted upon excitation is collected at the right angle using another optical fiber and then transmitted to the fluorescence spectrometer which utilizes an array detector. The array detection, as a key factor in process analytical chemistry, made the fluorescence spectrometer suited for multiwavelength detection of the fluorescence spectrum of the analytes. After optimization of the experimental parameters, the system has been successfully employed for sensitive determination of four fluoroquinolone antibiotics such as ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin. The linear dynamic ranges of four fluoroquinolones were between 0.25 and 20 μg·mL-1, and the detection limit of the method for ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin were 81, 36, 35, and 93 ng·mL-1, respectively. Finally, the proposed system is carried out for determination of fluoroquinolones in some pharmaceutical formulations.

Electrochemical synthesis of carbon nano spheres and its application for detection of ciprofloxacin

Carbon nano spheres (CNSs) were synthesized by single step electrochemical synthesis route in ultra-pure water as a medium of synthesis. Characterization of synthesized CNSs was carried out using atomic force microscope (AFM), particle size analyzer, zeta potential analyzer and Fourier Transform Infrared (FTIR) measurements, from which the information about the morphology and functional groups present on the surface of the particles are obtained. The particle size of the CNSs was found to be 6 nm. FTIR spectrum shows the presence of functional groups such as -OH, C≡C, C = C and on the CNSs. Electrochemical and spectroscopic experiments were conducted to determine the interaction of the drug molecule ciprofloxacin (Cf) with CNSs, strong interaction between Cf and CNSs leads to the development of analytical method of detection of Cf using CNSs as the pre-concentrating agent. The detection of limit of the present method is obtained as 0.15 μM at (S/N) ratio of 3. CNSs can be considered as a potential candidate for the fabrication of sensor for high sensitive determination of Cf.

Fluorescent carbon dots based sensing system for detection of enrofloxacin in water solutions

Enrofloxacin (ENR) is one of the environmental pollutants need to remove in many wastewater treatment processes. Traditional methods for measuring ENR are often complex and time-consuming. Due to their low cost and high efficiency, fluorescent carbon dots can be used for detecting many pharmaceuticals. In this contribution, nitrogen doped fluorescent carbon dots (N-CDs) were firstly synthesized with a fluorescence quantum yield of 20.5%. The N-CDs can emit strong blue fluorescence when excited at 368 nm and there exist a large amount of carboxyl, hydroxyl and amine groups on their surfaces. In addition, the fluorescence of N-CDs could be quenched in the presence of Cu²⁺, which could be gradually restored upon adding ENR. Thereby, a rapid and sensitive fluorescent sensing strategy based on the fluorescence recovery of the N-CDs-Cu²⁺ system was designed for selective detection of ENR. The possible sensing mechanism was also proposed in terms of the results of resonance Rayleigh scattering, UV-vis absorption and Fourier transform infrared (FITR) spectra. Under the optimal condition, a good linear relationship was obtained for ENR determination with concentrations ranging from 1.0 to 15.0 μg·mL^-1 and the detection limit of 0.16 μg·mL^-1 was achieved. Finally the proposed sensing system was applied for the detection of ENR in real water samples with satisfactory results.

Optical and Electrochemical Sensors and Biosensors for the Detection of Quinolones

One major concern associated with food safety is related to residual effects of antibiotics that are widely used to treat animals and result in antimicrobial resistance. Among different groups of antibiotic, the use of quinolones in livestock is of major concern due to the significance of these antimicrobial drugs for the treatment of a range of infectious diseases in humans. Therefore, it is desirable to develop reliable methods for the rapid, sensitive, and on-site detection of quinolone residue levels in animal-derived foods to ensure food safety. Sensors and biosensors are promising future platforms for rapid and on-site monitoring of antibiotic residues. In this review, we focus on recent advancements and modern approaches in quinolone sensors and biosensors.

An aptamer-based fluorescence bio-sensor for chiral recognition of arginine enantiomers

In this study, a novel aptamer - based fluorescence bio-sensor (aptamer-AuNps) was developed for chiral recognition of arginine (Arg) enantiomers based on aptamer and gold nanoparticles (AuNps). Carboxyfluorescein (FAM) labeled aptamers (Apt) were absorbed on AuNps and their fluorescence intensity could be significantly quenched by AuNps based on fluorescence resonance energy transfer (FRET). Once d-Arg or l-Arg were added into the above solution, the aptamer specifically bind to Arg enantiomers and released from AuNps, so the fluorescence intensity of d-Arg system and l-Arg system were all enhanced. The affinity of Apt to l-Arg is tighter to d-Arg, so the enhanced fluorescence signals of l-Arg system was stronger than d-Arg system. What's more, the enhanced fluorescence were directly proportional to the concentration of d-Arg and l-Arg ranging from 0-300 nM and 0-400 nM with related coefficients of 0.9939 and 0.9952, respectively. Furthermore, the method was successfully applied to detection l-Arg in human urine samples with satisfactory results. Eventually, a simple "OR" logic gate with d-Arg &l-Arg as inputs and AuNps aggregation state as outputs was fabricated, which can help us understand the chiral recognition process deeply.