Poly(calixarene ionic liquid) modified Fe3O4 nanoparticles as new sorbent for extraction of flavonoids in fruit juice and green tea

Separation of soy isoflavones from soy sauce residue by MIL-100(Fe)

Soy sauce residue (SSR) is a valuable biological resource, which contains soy isoflavones (SIs) with antioxidant activity and can be used to scavenge radicals. Herein, MIL-100(Fe) was synthesized for the extraction of SIs from SSR. Under the optimal adsorption conditions, the adsorption capacity of MIL-100(Fe) for SIs was 51.81 mg/g, which could achieve a purity of 56.17% and a recovery of 93.8%. These results demonstrated MIL-100(Fe) possessed effective properties of adsorption and purification for SIs. The content of SIs in the purified product was 167 times than that of SSR. The purified total SIs had a good antioxidant activity. The established method had a good scavenging ability toward 2, 2-diphenyl-1-picrylhydrazyl, superoxide and hydroxyl radicals, with IC₅₀ values of 0.177, 0.116 and 0.082 mg/mL, respectively. Besides, the ferrous ion chelating potency was better than others, with IC₅₀ values of 0.63 ± 0.0044 mg/mL. The established method was suitable for large-scale separation of purified total SIs and provided a reference for purification of bioactive factors from complex substrates.

Combination of a dispersive solid phase extraction method based on octadecylamine modified magnetic nanoparticles with dispersive liquid-liquid microextraction for the extraction and preconcentration of pesticides

In the present work, a new and efficient sorbent has been prepared using the co-precipitation method for magnetic dispersive solid phase extraction followed by dispersive liquid-liquid microextraction. This method was used for the extraction and preconcentration of some widely-used pesticides (chlorpyrifos, haloxyfop-R-methyl, oxadiazon, diniconazole, clodinafop-propargyl, fenpropathrin, and fenoxaprop-P-ethyl) from fruit juices prior to their determination by gas chromatography-flame ionization detection. The sorbent was prepared by octadecylamine co-precipitation with Fe₃O₄. In the first step, mg amount of the magnetic sorbent was spread into an aqueous sample solution including the selected analytes and vortexed. Then the analytes were eluted with acetonitrile from the surface of the nanoparticles separated with an external magnetic field from the aqueous solution. In the second step, the obtained eluent was mixed with an extraction solvent (chloroform) at the μL-level and rapidly injected into deionized water. After centrifugation, an aliquot of the sedimented phase was injected into the separation system. Experimental parameters which control the performance of both steps were investigated and optimized. Using optimum extraction conditions, the proposed method provided low limits of detection (0.23-0.41 μg L^-1) and quantification (0.81-1.3 μg L^-1), high enrichment factors (353-443), acceptable extraction recoveries (70-88%), and satisfactory relative standard deviations (≤6%) for intra- (n = 6) and inter-day (n = 4) precisions at a concentration of 30 μg L^-1 of each pesticide.

Ionic liquid-based magnetic nanoparticles for magnetic dispersive solid-phase extraction: A review

Due to their highly tunable nature and outstanding physicochemical properties, ionic liquids (ILs) have been widely reported for use in the synthesis of multitudinous magnetic nanoparticles (MNPs). IL-based magnetic nanoparticles (IL-MNPs) have great potential in magnetic dispersive solid-phase extraction (MDSPE). At present, IL-MNPs have been successfully applied in the pretreatment of MDSPE samples from medicines, pesticides, veterinary drugs, heavy metals, dyes, additives, and proteins in agricultural products, foods and beverages, environmental water, and biological samples. In this review, the preparation of IL-MNPs and their application in MDSPE are comprehensively summarized. The structural characteristics of the introduced ILs used to prepare the IL-MNPs and the synthetic routes employed to obtain the IL-MNPs are described, including physical coating and chemical bonding methods. The IL-MNPs are then classified and described according to different modified materials, including silica-based materials, carbon-based materials, metal-organic frameworks, molecularly imprinted polymers and other interesting large/small molecules. Finally, the research prospects and development directions of IL-MNPs in the context of MDSPE are further identified.

Selective separation of main flavonoids by combinational use of ionic liquid-loaded microcapsules from crude extract of Tartary buckwheat

For selective adsorption of main flavonoids from crude Tartary buckwheat extract (rutin, 0.021 mg/mL; quercetin, 0.030 mg/mL; and kaempferol, 0.011 mg/mL), new ionic liquid-based sorbents were successfully prepared by encapsulating [Bmim]Br and [Bmim]Pro in regular spherical non-magnetic and magnetic microcapsules with polysulfone content of 8%, respectively. After appropriate loading process, the microcapsules were comprehensively characterized by infrared spectroscopy, thermogravimetry analysis and scanning electron microscopy. Then the separation strategy was designed to separate rutin and quercetin from kaempferol by combinational use of two kinds of IL-loaded microcapsules (ILLMs). The effects of solid-liquid ratio of ILLMs and extract, pH, time and adsorption temperature were all investigated. The experimental data fit well with the quasi-second-order kinetics model and Langmuir model. After desorption, target flavonoids were well recovered and the ILLMs showed good stability. As the result, a new IL-based separation technology for main flavonoids from food crop was developed for the first time.

[Research progress in application of immobilized ionic liquid materials to separation by solid-phase extraction]

Ionic liquids are low-temperature molten salts with almost no vapor pressure, and they are composed of organic cations and inorganic anions. Ionic liquids are characterized by the properties of good chemical stability, high solubility, designable structure, high conductivity and so on. The physicochemical properties of an ionic liquid depend on the nature and size of the cation and anion, which confer unique characteristics; hence, these reagents are also termed "designed extractants." As a new class of green solvents, ionic liquids are potential replacements to traditional volatile organic solvents used for extraction; for this reason, ionic liquids have attracted the attention of scientists. Research on the methods of preparation and applications of ionic liquids is being diversified, and they are extensively used in catalytic chemistry, photoelectron chemistry, materials chemistry, analytical chemistry, etc. By functional guiding design, the structures of ionic liquids, especially the imidazole ring cations, can be easily grafted with active groups such as hydroxyl, amino, carboxyl, and cyano groups, so that interactions between the ionic liquids and target molecules can be promoted via the formation of π-π bonds, hydrogen bonds, ionic bonds, and van der Waals forces. In addition, ionic liquids can be readily immobilized on solid carriers by physical or chemical means in order to obtain a new solid material with ionic liquids embedded internally or decorated on the surface. Furthermore, ionic liquids could be converted into ionic liquid-immobilized composite materials by impregnation, grafting, etc. The resulting composites not only suffer minimal loss of ionic liquids but also retain the typical characteristics of the ionic liquids and solid materials, thus showing improved mass transfer performance and better adsorption performance. Immobilized materials are characterized by high enrichment efficiency, high adsorption capacity, good stability, and strong extraction selectivity, as well as the presence of numerous recognition sites and high utilization rate of ionic liquids. In recent years, they have been widely used as solid-phase extraction adsorption materials for the separation of small organic molecules. This review introduces common immobilization methods and the characteristics of ionic liquid-immobilized materials, as well as their application in solid-phase extraction. In this paper, methods for the immobilization of ionic liquids with solid carriers such as silica gel, molecular sieves, molecularly imprinted polymers, graphene oxide, and magnetic nanomaterials are summarized, and the application of ionic liquid-immobilized materials in solid-phase extraction is reviewed. The target substances include alkaloids, flavonoids, polyphenols, and other natural active components as well as common drug molecules, organic pesticides, and other organic small molecular compounds. The properties, applications, and separation mechanisms of ionic liquids immobilized with various carriers are systematically introduced. Literature survey shows that the distribution of the binding active sites of ionic liquid-immobilized materials to the target molecules is more uniform, which increases the adsorption capacity of the materials. The adsorption efficiency of ionic liquid-immobilized materials is related to the type of ionic liquid, amount of adsorption material, concentration of the sample solution, adsorption temperature, solution pH, flow rate of the eluent, and type and amount of the eluting solvent. The existing disadvantages of ionic liquids, such as simple structures, insufficient basic theoretical research, and unsatisfactory extraction degree in complex matrixes would also be discussed. The corresponding solutions would be presented with the aim of providing guidance for the application of ionic liquid-immobilized materials in the separation and analysis of targets in complex matrices, thus paving the way for a new direction in the field of extraction and separation.

Greenness of magnetic nanomaterials in miniaturized extraction techniques: A review

Green analytical chemistry principles should be followed, as much as possible, and particularly during the development of analytical sample preparation methods. In the past few years, outstanding materials such as ionic liquids, metal-organic frameworks, carbonaceous materials, molecularly imprinted materials, and many others, have been introduced in a wide variety of miniaturized techniques in order to reduce the amount of solvents and sorbents required during the analytical sample preparation step while pursuing more efficient extraction methods. Among them, magnetic nanomaterials (MNMs) have gained special attention due to their versatile properties. Mainly, their ability to be separated from the sample matrix using an external magnetic field (thus enormously simplifying the entire process) and their easy combination with other materials, which implies the inclusion of a countless number of different functionalities, highly specific in some cases. Therefore, MNMs can be used as sorbents or as magnetic support for other materials which do not have magnetic properties, the latter permiting their combination with novel materials. The greenness of these magnetic sorbents in miniaturized extractions techniques is generally demonstrated in terms of their ease of separation and amount of sorbent required, while the nature of the material itself is left unnoticed. However, the synthesis of MNMs is not always as green as their applications, and the resulting MNMs are not always as safe as desired. Is the analytical sample preparation field ready for using green magnetic nanomaterials? This review offers an overview, from a green analytical chemistry perspective, of the current state of the use of MNMs as sorbents in microextraction strategies, their preparation, and the analytical performance offered, together with a critical discussion on where efforts should go.

Synthesis of a magnetic sorbent and its application in extraction of different pesticides from water, fruit, and vegetable samples prior to their determination by gas chromatography-tandem mass spectrometry

In this investigation, an efficient sorbent based on Fe₃O₄@polyphenols magnetic nanoparticles has been prepared using the extract of Mentha piperita leaves for the first time. The main purposes of this study were synthesis of economically affordable and environmentally friendly sorbent using the extract of Mentha piperita leaves and evaluating its application as a sorbent in magnetic solid phase extraction. The functional groups, magnetic property, size, and shape of the synthesized sorbent were characterized. The sorbent was utilized for the extraction and preconcentration of various pesticides (chlorpyrifos, fenazaquin, penconazole, diniconazole, oxadiazon, haloxyfop-methyl, hexaconazole, clodinafop-propargyl, tebuconazole, and fenoxaprop-p-ethyl) from vegetable, fruit, and water samples. After magnetic solid phase extraction, a dispersive liquid-liquid microextraction method was done to achieve low detection limits. The enriched pesticides were monitored by gas chromatography-tandem mass spectrometry. The synthesized sorbent was characterized by Fourier transform infrared, scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction, and vibrating sample magnetometer techniques, which confirmed the successful synthesis of the magnetic nanoparticles. The effective parameters such as the sorbent weight, ionic strength, pH, vortex time, and kind and volume of elution and extraction solvents were studied. Under optimum extraction conditions, the method showed broad linear ranges (0.05-1000 µg L^-1) with low limits of detection (0.27-4.13 ng L^-1) and quantification (0.91-13.8 ng L^-1). Extraction recoveries and enrichment factors were in the ranges of 54-89 % and 491-811, respectively.

Recent applications of magnetic solid phase extraction in sample preparation for phytochemical analysis

Sample preparation such as isolation and pre-concentration is a crucial step for the phytochemical analysis. Magnetic solid-phase extraction (MSPE) has received considerable attention, mainly due to its phase separation more conveniently by facile magnetic decantation as compared to traditional SPE. This review focused on the recent applications of MSPE in sample preparation for the analysis of phytochemical compounds in plants, biological samples and Chinese herbal preparations. In addition, the enzymes immobilized on the magnetic materials and used for the biospecific extraction of enzyme inhibitors were also discussed. The information summarized in this article may provide a reference to the further applications of MSPE in phytochemical analysis.

Facile synthesis of magnetic sulfonated covalent organic framework composites for simultaneous dispersive solid-phase extraction and determination of β-agonists and fluoroquinolones in food samples

In this work, an efficient method for the determination of β-agonists and fluoroquinolones was established, based on a mixed-mode sorbent of magnetic sulfonated covalent organic framework composites. By coupling with HPLC-MS/MS, the main factors that affect the extraction procedure were optimized. Under the optimal conditions, the proposed HPLC-MS/MS method was successfully utilized for the extraction of β-agonists and fluoroquinolones in milk and pork meat samples. The method showed good linearities (R² ≥ 0.9916), and low LOQs of 0.1-0.2 ng g^-1 for β-agonists and fluoroquinolones. The adsorption mechanism was investigated with the assistance of quantum chemistry calculation method, and it is worth noting that the sorbent relied mainly on the multiple adsorption mechanisms, including π-π stacking, hydrophobic, electrostatic attraction and hydrogen-bonding interactions. This work not only provides a simple method for the preparation of a mixed-mode sorbent, but also a routine analysis strategy for monitoring the illegal use of β-agonists and fluoroquinolones.

Adjusting the chromatographic properties of poly(ionic liquid)-modified stationary phases by substitution on the imidazolium cation

Poly(ionic liquid)-modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)-modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)-modified stationary phases can provide various interactions toward solutes. Compared to the cyano-functionalized poly(ionic liquid) stationary phase, the tetrazolyl-functionalized poly(ionic liquid) stationary phase provides additional cation-exchange and π-π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti-inflammatory drugs.

Magnetic mesoporous nanoparticles modified with poly(ionic liquids) with multi-functional groups for enrichment and determination of pyrethroid residues in apples

Considering that the determination of pyrethroid residues is of value for the safety of food, a new poly(ionic liquid)-functionalized magnetic mesoporous nanoparticle was designed and used as an adsorbent in magnetic solid-phase extraction for the enrichment of eight pyrethroids. The porous structure and large surface area of the mesoporous silica shell endow the adsorbent with abundant binding sites. In contrast to the reported poly(ionic liquids) with only one kind of functional group in the cationic part, the new poly(ionic liquids) with mixed cyano and phenyl groups in cationic part matched the chemical structure of the analytes to improve extraction efficiency. Under the optimum conditions, an effective method was established for the determination of eight pyrethroids in apples. Adsorption equilibrium can be quickly reached in 1 min, greatly decreasing the extraction time. The linearity range was found to be 10-200 ng/g, and the detection limits ranged from 0.24 to 1.99 ng/g. Recoveries of analytes in apple samples ranged from 87.3 to 119.0%, with relative standard deviations varying in the range of 3-21.2% (intraday) and 0.3-15.2% (interday). The results indicate that the proposed method is a good candidate for pyrethroid residues in apple samples.

Separation performance of p-tert-butyl(tetradecyloxy)calix[6]arene as a stationary phase for capillary gas chromatography

This work presents the first example of the utilization of p-tert-butyl(tetradecyloxy)calix[6]arene (C6A-C10) as a stationary phase for capillary gas chromatographic (GC) separation.