The use of prepared activated carbon as adsorbent for the removal of orange G from aqueous solution

Adsorptive removal of orange G dye from aqueous solution by ultrasonic-activated peanut shell powder: isotherm, kinetic and thermodynamic studies

The current study is to develop surface-modified peanut shell granules by incorporating activated carbon to enhance the removal efficiency of Orange G dye (OGD) through adsorption. Activated carbon was prepared from Arachis hypogaea shell (Peanut shell) using a chemical activation method. Ultrasonic Activated Peanut Shell Powder (UAPSP) was characterised using FT-IR and SEM analysis to identify functional groups and assess surface morphology. To determine the optimal conditions, a batch adsorption study was conducted. The results indicated a maximum removal efficiency of 99.5% and a maximum adsorption capacity of 298.36 mg/g under the following parameters: pH 5, temperature 303 K, interaction period of 60 min, a dosage of 0.5 g/L for an OGD concentration of 10 mg/L. The adsorption mechanism in the current system was evaluated using the Langmuir, Freundlich, Sips, Temkin, and D-R isotherms models. Among these, the Langmuir isotherm exhibited the best fit with an R2 value of 0.997. UAPSP demonstrated a monolayer adsorption capacity of 1.9 mg/g for OGD removal. The pseudo-second-order kinetic model provided the most effective fit with an R2 value of 0.998. Thermodynamic studies revealed that the adsorption process was spontaneous and exothermic, as evidenced by the negative values of ΔG° ( -1.497) and ΔS° (16.4052) at 303 K. Additionally, the mean free energy value (E) in the D-R isotherm increased to 10.58 KJ/mol with a temperature rise from 303 K to 343 K. The characterisation results confirmed that UAPSP is an effective, cost-free, and commercial alternative adsorbent for the removal of hazardous dyes from wastewater.

Effective adsorption of Orange G dye using chitosan cross-linked by glutaraldehyde and reinforced with quartz sand

In this study, quartz sand (QS) incorporated into a crosslinked chitosan-glutaraldehyde matrix (QS@Ch-Glu) was prepared and employed as an efficient adsorbent for the elimination of Orange G (OG) dye from water. The sorption process is adequately described by the pseudo-second order kinetic model and the Langmuir isotherm model with maximum adsorption capacities of 172.65, 188.18, and 206.65mg/g at 25, 35, and 45 °C, respectively. A statistical physics model was adopted to elucidate the adsorption mechanism of OG on QS@Ch-Glu. Calculated thermodynamic factors revealed that the adsorption of OG is endothermic, spontaneous, and occurs via physical interactions. Overall, the proposed adsorption mechanism was based on electrostatic attractions, n-π stacking interaction, hydrogen bonding interaction, and Yoshida hydrogen bonding. The adsorption rate of QS@Ch-Glu was still above 95 % even after 6 cycles of adsorption and desorption. Furthermore, QS@Ch-Glu demonstrated high efficiency in real water samples. All these findings demonstrate that QS@Ch-Glu is qualified for practical applications.

Effectiveness of a novel polyaniline@Fe-ZSM-5 hybrid composite for Orange G dye removal from aqueous media: Experimental study and advanced statistical physics insights

A polyaniline@Fe-ZSM-5 composite was synthesized via an in situ interfacial polymerization procedure. The morphology, crystallinity, and structural features of the as-developed PANI@Fe-ZSM-5 composite were assessed using scanning electron microscopy - energy dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The composite was efficiently employed for the first time as an adsorbent Orange G (OG) dyestuff from water. The OG dye adsorption performance was investigated as a function of several operating conditions. The kinetic study demonstrated that a pseudo-second-order model was appropriate to anticipate the OG adsorption process. The maximum adsorption capacity was found to be 217 mg/g. The adsorption equilibrium data at different temperatures were calculated via advanced statistical physics formalism. The entropy function indicated that the disorder of OG molecules improved at low concentrations and lessened at high concentrations. The free enthalpy and internal energy functions suggested that the OG adsorption was a spontaneous process and physisorption in nature. Regeneration investigation showed that the PANI@Fe-ZSM-5 could be effectively reused up to five cycles. The main results of this work provided a deep insight on the experimental study supported by advanced statistical physics prediction for the adsorption of Orange G dye onto the novel polyaniline@Fe-ZSM-5 hybrid composite. Additionally, the experimental and advanced statistical physics findings stated in this study may arouse research interest in the field of wastewater treatment.

Polyaniline coated tungsten trioxide as an effective adsorbent for the removal of orange G dye from aqueous media

In this work, the core–shell PANI@WO₃ composite was obtained from the reaction of aniline monomer polymerization with WO₃ particles; sodium persulfate was used as an oxidant. Various analytical techniques such as scanning electron microscopy (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), and X-ray photoelectron spectroscopy (XPS) were used to characterize the as-prepared PANI@WO₃ adsorbent, which well confirmed that the WO₃ particles were coated by polyaniline polymer. The PANI@WO₃ composite was tested as an adsorbent to remove reactive orange G (OG) for the first time. pH, adsorbent dose, contact time, initial dye concentration, and temperature were systematically investigated in order to study their effect on the adsorption process. The experimental findings showed that the PANI@WO₃ composite has considerable potential to remove an aqueous OG dye. Langmuir and Freundlich's models were used to analyze the equilibrium isotherms of OG dye adsorption on the PANI@WO₃ composite. As a result, the best correlation of the experimental data was provided by the Langmuir model, and the maximum capacity of adsorption was 226.50 mg g⁻¹. From a thermodynamic point of view, the OG dye adsorption process occurred spontaneously and endothermically. Importantly, PANI@WO₃ still exhibited an excellent adsorption capability after four regeneration cycles, indicating the potential reusability of the PANI@WO₃ composite. These results indicate that the as prepared PANI@WO₃ composite could be employed as an efficient adsorbent and was much better than the parent material adsorption of OG dye.

In this work, the core–shell PANI@WO₃ composite was obtained from the reaction of aniline monomer polymerization with WO₃ particles; sodium persulfate was used as an oxidant.

Elaboration of novel polyaniline@Almond shell biocomposite for effective removal of hexavalent chromium ions and Orange G dye from aqueous solutions

A novel polyaniline@Almond shell (PANI@AS) biocomposite was synthesized via facile in situ chemical polymerization method. The as-synthesized adsorbent was characterized using various analytical techniques such as Fourier transform infrared spectroscopy (FTIR), X-ray energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), and potentiometric titration. A batch adsorption system was applied with the aim of investigating as-synthesized adsorbent ability to remove Cr(VI) ions and Orange G (OG) textile dye from aqueous solutions. Obtained results revealed that adsorption process was strongly depended upon the physicochemical parameters. The adsorption of Cr(VI) and OG dye onto PANI@AS was better described by the pseudo second-order-kinetic model and followed the Freundlich isotherm model. The maximum uptakes were 335.25 for Cr(VI) and 190.98 mg g^-1 for OG dye. We further evaluated that PANI@AS biocomposite could be regenerated easily with NaOH solution and efficiently reused for Cr(VI) and OG dye removal from aqueous media. Thus, these results indicated the potential practical application of PANI@AS biocomposite for wastewater treatment.