Simultaneous magnetic solid phase extraction of acidic and basic pesticides using triazine-based polymeric network modified magnetic nanoparticles/graphene oxide nanocomposite in water and food samples

A magnetic molecularly imprinted polymer based on an eco-friendly deep eutectic solvent for the selective recognition of dichlorodiphenyl trichloroethane and its degradation products in fruits and vegetables

A new magnetic molecularly imprinted polymer was successfully synthesized using a ternary deep eutectic solvent derived from caffeic acid-choline chloride-formic acid as a functional monomer, thymol-menthol deep eutectic solvent as a template, ethylene glycol dimethacrylate as a cross-linker, potassium peroxodisulfate as an initiator, and aqueous ethanol solution (90% (v/v)) as a porogen. The synthesized material was characterized and applied for magnetic solid-phase extraction of dichlorodiphenyl trichloroethane and its degradation products. Optimization of the extraction condition was carried out using the central composite design and response surface methodology. The good analytical performance of magnetic solid phase extraction/gas chromatography‒mass spectrometry using the proposed adsorbent shows a wide linear range of 0.07-500 ng g-1 with R2 greater than 0.992. Low detection limits and quantitation limits were observed in the ranges of 0.01-2.00 ng g-1 and 0.07-2.50 ng g-1, respectively. The precisions shown in terms of relative standard deviations were lower than 7.0% for intraday (n=5) and 8.6% for interday (n=5 × 3) experiments. The proposed method was applied for preconcentration and determination of dichlorodiphenyl trichloroethane and its degradation products in fruit and vegetable samples. The satisfactory recoveries of the real samples at three spiked concentrations were obtained in the range of 79.1%-110.9% with RSDs lower than 7.5%. The findings highlight the importance of developing efficient sorbents for the enrichment of persistent organic pollutants in food matrices.

Nanoporous carbon fiber derived from Cu-BDC metal organic framework @pencil graphite as a sorbent for solid phase microextraction of acetamiprid and imidacloprid

Solid-phase microextraction (SPME) is a sample pretreatment technique for enrichment of trace level of compounds from complex matrices. The fiber coating, as an extraction phase, is the significant part of SPME, which specifying the analytical performance of the developed SPME. In this study, a novel in situ fabricated Cu@porous carbon fiber that derived from copper benzene-1,4-dicarboxylate framework@pencil graphite (Cu-BDC MOF@PG) fiber was prepared as a SPME fiber. The Cu-BDC MOF was electrodeposited on the surface of pencil graphite. The Cu@porous carbon fiber with nanoporous structure was constructed by the direct carbonization of the electrosynthesized fiber. The Cu@porous carbon fiber showed high analytical performance for direct immersion SPME (DI-SPME) of acetamiprid and imidacloprid in fruit and vegetable samples. The SPME method was coupled by high-performance liquid chromatography-ultraviolet detection (SPME-HPLC-UV) for determination of the analytes. Under the optimized condition, good linear ranges (1-500 μg L-1 and 0.5-200 μg L-1) and acceptable limits of detection (LODs = 0.30 and 0.15 μg L-1), appropriate spiking recoveries in the range 87-109.0% were attained for acetamiprid and imidacloprid, respectively. Intra- and inter-day relative standard deviations were found within the ranges of 2.35-3.46% and 3.30-3.70%, respectively. These results signify promising potential of the in situ fabricated porous carbon fiber for SPME applications. Considering that most of the pencil graphite is made of carbon, after the carbonization of the Cu-BDC MOF@PG fiber, a unified porous carbon fiber is obtained. Compared to other reported procedures, in situ direct carbonization of Cu-BDC MOF@PG fiber was a one-step and straightforward method to fabricate carbon fiber.

Challenges and effectiveness of nanotechnology-based photocatalysis for pesticides-contaminated water: A review

Pesticides have been frequently used in agricultural fields. Due to the expeditious utilization of pesticides, their excessive usage has negative impacts on the natural environment and human health. This review discusses the successful implications of nanotechnology-based photocatalysis for the removal of environmental pesticide contaminants. Notably, various nanomaterials, including TiO₂, ZnO, Fe₂O₃, nanoscale zero-valent iron, nanocomposite-based materials, have been proposed and have played a progressively essential role in wastewater treatment. In addition, a detailed review of the crucial reaction condition factors, including water matrix, pH, light source, temperature, flow rate (retention time), initial concentration of pesticides, a dosage of photocatalyst, and radical scavengers, is also highlighted. Additionally, the degradation pathway of pesticide mineralization is also elucidated. Finally, the challenges of technologies and the future of nanotechnology-based photocatalysis toward the photo-degradation of pesticides are thoroughly discussed. It is expected that those innovative extraordinary photocatalysts will significantly enhance the performance of pesticides degradation in the coming years.

Application of Graphene and its Derivatives in Detecting Hazardous Substances in Food: A Comprehensive Review

Graphene and its derivatives have been a burning issue in the last 10 years. Although many reviews described its application in electrochemical detection, few were focused on food detection. Herein, we reviewed the recent progress in applying graphene and composite materials in food detection during the past 10 years. We pay attention to food coloring materials, pesticides, antibiotics, heavy metal ion residues, and other common hazards. The advantages of graphene composites in electrochemical detection are described in detail. The differences between electrochemical detection involving graphene and traditional inherent food detection are analyzed and compared in depth. The results proved that electrochemical food detection based on graphene composites is more beneficial. The current defects and deficiencies in graphene composite modified electrode development are discussed, and the application prospects and direction of graphene in future food detection are forecasted.

[Recent advance of new sample preparation materials in the analysis and detection of environmental pollutants]

To successfully analyze complex samples and detect trace targets, sample pretreatment is essential. Efficient sample pretreatment techniques can remove or reduce interference from the sample matrix. It can also enrich analytes, thereby improving analytical accuracy and sensitivity. In recent years, various sample preparation techniques, including SPE, magnetic dispersion SPE, pipette tip SPE, stir bar extraction, fiber SPME, and in-tube SPME, have received increasing attention in environmental analysis and monitoring. The extraction efficiency mainly depends on the type of adsorbent material. Therefore, the development of efficient adsorbents is a crucial step toward sample preparation. This review summarizes and discusses the research advances in extraction materials over recent years. These extraction materials contain inorganic adsorbents, organic adsorbents, and inorganic-organic hybrid materials such as graphene, graphene oxide, carbon nanotubes, inorganic aerogels, organic aerogels, triazinyl-functionalized materials, triazine-based polymers, molecularly imprinted polymers, covalent organic frameworks, metal-organic frameworks, and their derivatives. These materials have been applied to extract different types of pollutants, including metal ions, polycyclic aromatic hydrocarbons, plasticizers, alkanes, phenols, chlorophenols, chlorobenzenes, polybrominated diphenyl ethers, perfluorosulfonic acids, perfluorocarboxylic acids, estrogens, drug residues, and pesticide residues, from environmental samples (such as water and soil samples). These sample preparation materials possess high surface areas, numerous adsorption sites, and allow extraction via various mechanisms, such as π-π, electrostatic, hydrophobic, and hydrophilic interactions, as well as hydrogen and halogen bond formation. Various sample pretreatment techniques based on these extraction materials have been combined with various detection methods, including chromatography, mass spectrometry, atomic absorption spectroscopy, fluorescence spectroscopy, and ion mobility spectroscopy, and have been extensively used for the determination of environmental pollutants. The existing challenges associated with the development of sample preparation techniques are proposed, and prospects for such extraction materials in environmental analysis and monitoring are discussed. Major trends in the field, including the development of efficient extraction materials with high enrichment ability, good selectivity, excellent thermal stability, and chemical stability, are discussed. Green sample pretreatment materials, environmentally friendly synthesis methods, and green sample pretreatment methods are also explored. Rapid sample pretreatment methods that can be conducted within minutes or seconds are of significant interest. Further, online sample pretreatment and automatic analysis methods have attracted increasing attention. Besides, real-time analysis and in situ detection have been important development directions, and are expected to be widely applicable in environmental analysis, biological detection, and other fields. Modern synthesis technology should be introduced to synthesize specific extraction materials. Controllable preparation methods for extraction materials, such as the in situ growth or in situ preparation of extraction coatings, will acquire importance in coming years. It will also be important to adopt high-performance materials from other fields for sample pretreatment. Organic-inorganic hybrid extraction materials can combine the advantages both organic materials and inorganic materials, and mutually compensate for any disadvantages. Extraction materials doped with nanomaterials are also promising. Although existing sample pretreatment techniques are relatively efficient, it is still imperative to develop novel sample preparation methods.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.

Recent Advances of Triazine-Based Materials for Adsorbent Based Extraction Techniques

This review mainly focused on the synthesis and properties of triazine-based materials as well as the state-of-the-art development of these materials in adsorption-based extraction techniques in the past 5 years, such as solid-phase extraction, magnetic solid-phase extraction, solid-phase microextraction and stir bar sorptive extraction, and the detection of various pollutants, including metal ions, drugs, estrogens, nitroaromatics, pesticides, phenols, polycyclic aromatic hydrocarbons and parabens. In the triazine-functionalized composites, triazine-based polymers and covalent triazine frameworks have been developed as the adsorbents with potential for environmental pollutants, mainly relying on the large surface area and the affinity of triazinyl groups with the targets. Triazine-based adsorbents have satisfactory sensitivity and selectivity towards different types of analytes, attributed from various mechanisms including π-π, electrostatics, hydrogen bonds, and hydrophobic and hydrophilic effects. The prospects of the materials for adsorption-based extraction were also presented, which can offer an outlook for the further development and applications.

Recent advances in the applications of nano-agrochemicals for sustainable agricultural development

Modern agricultural practices have triggered the process of agricultural pollution. This process can cause the degradation of eco-systems, land, and environment owing to the modern-day by-products of agriculture. The substantial use of chemical fertilizers, pesticides, and, contaminated water for irrigation cause further damage to agriculture. The current scenario of the agriculture and food sector has therefore become unsustainable. Nanotechnology has provided innovative and resourceful frontiers to the agriculture sector by contributing practical applications in conventional agricultural ways and practices. There is a large possibility that agri-nanotechnology can have a significant impact on the sustainable agriculture and crop growth. Recent research has shown the potential of nanotechnology in improving the agriculture sector by enhancing the efficiency of agricultural inputs and providing solutions to agricultural problems for improving food productivity and security. The prospective use of nanoscale agrochemicals such as nanofertilizers, nanopesticides, nanosensors, and nanoformulations in agriculture has transformed traditional agro-practices, making them more sustainable and efficient. However, the application of these nano-products in real field situations raises concern about nanomaterial safety, exposure levels, and toxicological repercussions to the environment and human health. The present review gives an insight into recent advancements in nanotechnology-based agrochemicals that have revolutionized the agriculture sector. Further, the implementation barriers related to the nanomaterial use in agriculture, their commercialization potential, and the need for policy regulations to assess possible nano-agricultural risks are also discussed.

Magnetic restricted-access carbon nanotubes for the extraction/pre-concentration of organophosphates from food samples followed by spectrophotometric determination

In this work, magnetic restricted-access carbon nanotubes (M-RACNTs) were synthesized, characterized and used in the dispersive solid-phase extraction (d-SPE) of organophosphate pesticides (OPPs) from food samples (broccoli, eggplant, cauliflower, and soy milk), followed by spectrophotometric determination in a flow injection analysis system. Fe₃O₄ nanoparticles were incorporated in the multi-walled carbon nanotubes employing dimethylformamide. The dimethylformamide was used as a solvent in the incorporation process, forming the suspension of both particles. The resulting M-CNTs were covered with an external bovine serum albumin (BSA) layer, chemically crosslinked. M-RACNTs were able to efficiently capture OPPs, excluding about 95% of the proteins from food matrices. The analyses were carried out in a flow injection analysis system (FIA), with the spectrophotometric detection (at 560 nm) of the complex formed by the reaction between OPPs, N-bromosuccinimide and rhodamine B. A fractional factorial design method was used to optimize the experimental parameters. The addition/recovery test showed results from 95.5% to 108.9%. Accuracies were checked by comparing the results obtained with the proposed and standard HPLC methods, which were in agreement. The proposed method was linear from 5 to 90 μg L^-1 of OPPs, with limits of detection and quantification of 0.74 and 5 μg L^-1 and precision of 3.67%, expressed as relative standard deviation. The pre-concentration factor was about 164 times.

A molecularly imprinted polymer based monolith pipette tip for solid-phase extraction of 2,4-dichlorophenoxyacetic acid in an aqueous sample

This paper presents a simple approach for fabrication of a pipette tip solid-phase extraction (PT-SPE) device, which possesses a monolith structure with low back pressure and has high selectivity to 2,4-dichlorophenoxyacetic acid (2,4-D). Pipette tips were packed with molecularly imprinted polymers (MIPs) as a selective adsorbent and high-density polyethylene (HDPE) as a co-sintering agent, and then heated to form a monolith extraction device. The key factors including the particle size and amount of packing material, and the type and volume of elution solvent, which influence PT-SPE device performance were optimized. A packing material of 40 mg/0.20 mL in a ratio of 4/6 (MIPs/HDPE) and treatment temperature of 150 °C was selected. By the determination with high-performance liquid chromatography (HPLC-SPD), the extraction device was found to have a good extraction recovery for a 2,4-D lake water sample at a low concentration (0.006 mg L-1) with an enrichment factor about 50. The proposed method provided a simple approach for the fabrication of a PT-SPE monolith device with reduced back pressure and wall effect, which are very important for improving the extraction efficiency. And the device will have promising application in the extraction of a variety of analytes in complex samples.

Recent Applications of Magnetic Nanoparticles in Food Analysis

Nanotechnology has become a topic of interest due to the outstanding advantages that the use of nanomaterials offers in many fields. Among them, magnetic nanoparticles (m-NPs) have been one of the most widely applied in recent years. In addition to the unique features of nanomaterials in general, which exclusively appear at nanoscale, these present magnetic or paramagnetic properties that result of great interest in many applications. In particular, in the area of food analysis, the use of these nanomaterials has undergone a considerable increase since they can be easily separated from the matrix in sorbent-based extractions, providing a considerable simplification of the procedures. This allows reducing cost and giving fast responses, which is essential in the food trade to guarantee consumer safety. These materials can also be easily tunable, providing higher selectivity. Moreover, their particular electrical, thermal and optical characteristics allow enhancing sensor signals, increasing the sensitivity of the approaches based on this type of device. The aim of this review article is to summarise the most remarkable applications of m-NPs in food analysis in the last five years (2016–2020) showing a general view of the use of such materials in the field.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.

The fabrication of a thiol-modified chitosan magnetic graphene oxide nanocomposite and its adsorption performance towards the illegal drug clenbuterol in pork samples

A novel thiol (provided by (3-mercaptopropyl) trimethoxysilane, MPTS)-modified chitosan magnetic graphene oxide nanocomposite (Fe₃O₄@SiO₂/GO/CS/MPTS) was synthesized and characterized for the first time as an efficient magnetic sorbent for the enrichment and extraction of trace levels of clenbuterol in pork samples (muscle, fat, heart and liver). Various greatly influential parameters were optimized using a Box-Behnken design (BBD) through the response surface methodology (RSM) to obtain more satisfactory recovery. Under optimum conditions, the method detection limits (MDLs) were in the range of 0.054-0.136 ng g^-1. The recoveries of three spiked levels ranged from 84.7% to 101.1%, and the relative standard deviations (RSDs) were lower than 9.3%. The results of the adsorption experiments showed that the maximum adsorption capacity of Fe₃O₄@SiO₂/GO/CS/MPTS for clenbuterol was 214.13 mg g^-1. The adsorption process was most consistent with pseudo second-order kinetics and Langmuir adsorption isotherm, indicating a homogeneous process with a chemisorptive nature. Also, the nanocomposite exhibited high adsorption capability for clenbuterol compared with Fe₃O₄@SiO₂/GO and Fe₃O₄@SiO₂/GO/CS. In addition, regeneration of the nanocomposite was effectively achieved, and it retained about 82% of its initial capacity after four cycles. All these results indicate that the synthetic nanocomposite is a promising efficient adsorbent for the adsorption of clenbuterol with high adsorption capacity and low cost.

Magnetic Solid-Phase Extraction of Organic Compounds Based on Graphene Oxide Nanocomposites

Graphene oxide (GO) is a chemical compound with a form similar to graphene that consists of one-atom-thick two-dimensional layers of sp²-bonded carbon. Graphene oxide exhibits high hydrophilicity and dispersibility. Thus, it is difficult to be separated from aqueous solutions. Therefore, functionalization with magnetic nanoparticles is performed in order to prepare a magnetic GO nanocomposite that combines the sufficient adsorption capacity of graphene oxide and the convenience of magnetic separation. Moreover, the magnetic material can be further functionalized with different groups to prevent aggregation and extends its potential application. Until today, a plethora of magnetic GO hybrid materials have been synthesized and successfully employed for the magnetic solid-phase extraction of organic compounds from environmental, agricultural, biological, and food samples. The developed GO nanocomposites exhibit satisfactory stability in aqueous solutions, as well as sufficient surface area. Thus, they are considered as an alternative to conventional sorbents by enriching the analytical toolbox for the analysis of trace organic compounds.