High effective adsorption of acid fuchsin dye using magnetic biodegradable polymer-based nanocomposite from aqueous solutions

Efficacy of exopolysaccharide in dye-laden wastewater treatment: A comprehensive review

The discharge of dye-laden wastewater into the water streams causes severe water and soil pollution, which poses a global threat to aquatic ecosystems and humans. A diverse array of microorganisms such as bacteria, fungi, and algae produce exopolysaccharides (EPS) of different compositions and exhibit great bioflocculation potency to sustainably eradicate dyes from water bodies. Nanomodified chemical composites of EPS enable their recyclability during dye-laden wastewater treatment. Nevertheless, the selection of potent EPS-producing strains and physiological parameters of microbial growth and the remediation process could influence the removal efficiency of EPS. This review will intrinsically discuss the fundamental importance of EPS from diverse microbial origins and their nanomodified chemical composites, the mechanisms in EPS-mediated bioremediation of dyes, and the parametric influences on EPS-mediated dye removal through sorption/bioflocculation. This review will pave the way for designing and adopting futuristic green and sustainable EPS-based bioremediation strategies for dye-laden wastewater in situ and ex situ.

Hydrogels Based on Chitosan and Nanoparticles and Their Suitability for Dyes Adsorption from Aqueous Media: Assessment of the Last-Decade Progresses

Water is one of the fundamental resources for the existence of humans and the environment. Throughout time, due to urbanization, expanding population, increased agricultural production, and intense industrialization, significant pollution with persistent contaminants has been noted, placing the water quality in danger. As a consequence, different procedures and various technologies have been tested and used in order to ensure that water sources are safe for use. The adsorption process is often considered for wastewater treatment due to its straightforward design, low investment cost, availability, avoidance of additional chemicals, lack of undesirable byproducts, and demonstrated significant efficacious potential for treating and eliminating organic contaminants. To accomplish its application, the need to develop innovative materials has become an essential goal. In this context, an overview of recent advances in hydrogels based on chitosan and nanocomposites and their application for the depollution of wastewater contaminated with dyes is reported herein. The present review focuses on (i) the challenges raised by the synthesis process and characterization of the different hydrogels; (ii) the discussion of the impact of the main parameters affecting the adsorption process; (iii) the understanding of the adsorption isotherms, kinetics, and thermodynamic behavior; and (iv) the examination of the possibility of recycling and reusing the hydrogels.

Nanoremediation strategies to address environmental problems

A rapid rise in population, extensive anthropogenic activities including agricultural practices, up-scaled industrialization, massive deforestation, etc. are the leading causes of environmental degradation. Such uncontrolled and unabated practices have affected the quality of environment (water, soil, and air) synergistically by accumulating huge quantities of organic and inorganic pollutants in it. Environmental contamination is posing a threat to the existing life on the Earth, therefore, demands the development of sustainable environmental remediation approaches. The conventional physiochemical remediation approaches are laborious, expensive, and time-consuming. In this regard, nanoremediation has emerged as an innovative, rapid, economical, sustainable, and reliable approach to remediate various environmental pollutants and minimize or attenuate the risks associated with them. Owing to their unique properties such as high surface area to volume ratio, enhanced reactivity, tunable physical parameters, versatility, etc. nanoscale objects have gained attention in environmental clean-up practices. The current review highlights the role of nanoscale objects in the remediation of environmental contaminants to minimize their impact on human, plant, and animal health; and air, water, and soil quality. The aim of the review is to provide information about the applications of nanoscale objects in dye degradation, wastewater management, heavy metal and crude oil remediation, and mitigation of gaseous pollutants including greenhouse gases.

Preparation of Magnetic Surface Ion-Imprinted Polymer Based on Functionalized Fe3O4 for Fast and Selective Adsorption of Cobalt Ions from Water

A novel cobalt ion-imprinted polymer (Co(II)-MIIP) based on magnetic Fe3O4 nanoparticles was prepared by using Co(II) as the template ion, and bis(2-methacryloxyethyl) phosphate and glycylglycine as dual functional monomers. The fabricated material was analyzed by Fourier transform infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, Brunauer–Emmett–Teller, X-ray diffraction, and vibrating sample magnetometer. The adsorption experiments with Co(II)-MIIP, found that the maximum adsorption capacity could reach 33.4 mg·g−1, while that of the non-imprinted polymer (Co(II)-NIP) was found to reach 15.7 mg·g−1. The adsorption equilibriums of Co(II)-MIIP and Co(II)-NIP was established within 20 min and 30 min, respectively. The adsorption process could be suitably described by the Langmuir isotherm model and the pseudo-second-order kinetics model. In binary mixtures of Co(II)/Fe(II), Co(II)/Cu(II), Co(II)/Mg(II), Co(II)/Zn(II), and Co(II)/Ni(II), the relative selectivity coefficients of Co(II)-MIIP toward Co(II)-NIP were 5.25, 4.05, 6.06, 11.81, and 4.48, respectively. The regeneration experiments indicated that through six adsorption–desorption cycles, the adsorption capacity of Co(II)-MIIP remained nearly 90%.

Emerging novel polymeric adsorbents for removing dyes from wastewater: A comprehensive review and comparison with other adsorbents

Dye molecules are one of the most hazardous compounds for human and animal health and the excess intake of these materials can create toxic impacts. Several studies show the practicality of the adsorption process for dye uptake from wastewaters. In recent years, various adsorbents were used to be efficient in this process. Among all, polymeric adsorbents demonstrate great applicability in different environmental conditions and attract many researchers to work on them, although there is not enough reliable and precise information regarding these adsorbents. This study aims to investigate some influential parameters such as their type, physical properties, experimental conditions, their capacity, and further modeling along with a comparison with non-polymeric adsorbents. The influence of the main factors of adsorption capacity was studied and the dominant mechanism is explained extensively.

Degradation of Acid Violet 19 textile dye by electro-peroxone in a laboratory flow plant

This paper deals with the degradation of Acid Violet 19 (AV19) textile dye by the electro-peroxone (E-peroxone) process in a laboratory flow plant using a filter press cell fitted with a 3D gas diffusion electrode (3D GDE) containing a graphite felt positioned on carbon-cloth PTFE as cathode, and a Ti|IrSnSb-oxides plate as anode. H₂O₂ was formed by the oxygen reduction reaction (ORR) in the cathode; the air was supplied by an external compressor. The O₃ produced externally by an ozonator was added in the pipeline at the outlet of the electrolyzer to promote the reaction between the H₂O₂ and O₃ to produce OH, which is the responsible for the mineralization of the dye. The effect of electrolyte flow rate (Q), current density (j), and initial concentration of AV19 dye on its degradation was addressed. The best electrolysis in a solution containing 40 mg TOC L^-1, 0.05 M Na₂SO₄, at pH 3, was obtained at j = 20 mA cm^-2, Q = 2.0 L min^-1, using a pressure of the air fed to the 3D GDE of P_GDE = 3 psi, and an ozone inlet mass flow rate of [Formula: see text]  = 14.5 mg L^-1, achieving 100% discoloration, 60% mineralization, with mineralization current efficiency and energy consumption of 36% and 0.085 kWh(gTOC)^-1. The degradation of AV19 dye was also performed by anodic oxidation plus H₂O₂ electrogenerated (AO-H₂O₂) and ozonation. The oxidation power was AO-H₂O₂ < ozonation < E-peroxone. Three carboxylic acids were quantified by chromatography as oxidation end products.

Magnetic nanocomposites for sustainable water purification-a comprehensive review

Numerous contaminants in huge amounts are discharged to the environment from various anthropogenic activities. Waterbodies are one of the major receivers of these contaminants. The contaminated water can pose serious threats to humans and animals, by distrubing the ecosystem. In treating the contaminated water, adsorption processes have attained significant maturity due to lower cost, easy operation and environmental friendliness. The adsorption process uses various adsorbent materials and some of emerging adsorbent materials include carbon- and polymer-based magnetic nanocomposites. These hybrid magnetic nanocomposites have attained extensive applications in water treatment technologies due to their magnetic properties as well as combination of unique characteristics of organic and inorganic elements. Carbon- and polymer-related magnetic nanocomposites are more adapted materials for the removal of various kinds of contaminants from waterbodies. These nanocomposites can be produced via different approaches such as filling, pulse-laser irradiation, ball milling, and electro-spinning. This comprehensive review is compiled by reviewing published work of last the latest recent 3 years. The review article extensively focuses on different approaches for producing various carbon- and polymer-based magnetic nanocomposites, their merits and demerits and applications for sustainable water purification. More specifically, use of carbon- and polymer-based magnetic nanocomposites for removal of heavy metal ions and dyes is discussed in detail, critically analyzed and compared with other technologies. In addition, commercial viability in terms of regeneration of adsorbents is also reviewed. Furthermore, the future challenges and prospects in employing magnetic nanocomposites for contaminant removal from various water sources are presented.

Insight in to sunlight-driven rapid photocatalytic degradation of organic dyes by hexacyanoferrate-based nanoparticles

Release of colouring agents into the environment alarms the need to design a cheap, quick and safe process. Owing to environmental safety concern, synthesis of two metal hexacyanoferrates (MHCFs) based on cadmium (CdHCF) and manganese (MnHCF) was carried out using natural plant extract of Azadirachta indica and water as a solvent. Synthesized MHCFs were utilized for the removal of an acid dye (fuchsin acid, FA) and a xanthenes dye (rhodamine B, RB). The reactions were optimized at various conditions of dye concentration, catalyst dose, reaction pH, time and source of light. The MHCFs showed excellent results with both the dyes within very limited span of time (2 h). Consequently, 98% of FA and 97% of RB were degraded with 10 mg of CdHCF, at neutral pH and under sunlight. The degradation process followed the first-order reaction kinetics having t_1/2 around 0.3 min. The MHCFs exhibited difference of only little percentage in degradation owing to a very slight difference between their surface areas (CdHCF: 54.1 m² g^-1; MnHCF: 49.7 m² g^-1). The synthesised nanocatalysts were stable as indicated by their higher negative zeta potential values. The adsorption of dyes was found to be maximum with CdHCF having X_m value 19.69 mg g^-1 and 18.15 mg g^-1 for FA and RB, respectively. Photocatalytic degradation involved the main role of hydroxyl radical as indicated by decline in activity of nanocatalyst in the presence of scavengers. All in all, this study presents highly active nanomaterials with higher surface area, stability and semiconducting properties under natural conditions.

Selective and rapid removal of Mo(VI) from water using functionalized Fe3O4-based Mo(VI) ion-imprinted polymer

Fe₃O₄ nanoparticles-based magnetic Mo(VI) surface ion-imprinted polymer (Mo(VI)-MIIP) was elaborated employing 4-vinyl pyridine as a functional monomer. The adsorbent preparation was confirmed by Fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectrometry, X-ray diffraction, vibrating sample magnetometer, thermogravimetric analysis, and surface area analysis. Batch adsorption experiments showed that the maximum adsorption capacity of Mo(VI)-MIIP was 296.40 mg g^-1 at pH 3, while that of the magnetic non-imprinted polymer (MNIP) was only 147.10 mg g^-1. The adsorption isotherm model was well fitted by the Langmuir isotherm model. The adsorption experiments revealed that Mo(VI)-MIIP reached adsorption equilibrium within 30 min, and the kinetics data fitting showed that the pseudo-second-order kinetics model suitably described the adsorption process. Mo(VI)-MIIP exhibited an excellent adsorption selectivity to Mo(VI) in binary mixtures of Mo(VI)/Cr(VI), Mo(VI)/Cu(II), Mo(VI)/H₂PO4₄^-, Mo(VI)/Zn(II), and Mo(VI)/I^-, with relative selectivity coefficients toward MNIP of 13.71, 30.27, 20.01, 23.53, and 15.89, respectively. After six consecutive adsorption-desorption cycles, the adsorption capacity of Mo(VI)-MIIP decreased by 9.5% (from 228.4 mg g^-1 to 206.7 mg g^-1 at initial Mo(VI) concentration of 250 mg L^-1), demonstrating its reusability.

Terephthalaldehyde as a good crosslinking agent in crosslinked chitosan hydrogel for the selective removal of anionic dyes

This work reports the selectivity and good adsorption performance for the removal of anionic dyes using an ultrasonic-synthesized terephthalaldehyde crosslinked chitosan hydrogel.