Mn-Doped ZnS Quantum dots–An Effective Nanoscale Sensor

Unmasking the Electrochemiluminescence Properties of Ternary Mn/Fe/Co Metals Doped Porous g-C3N4 Fiber-like Nanostructure

Graphitic-phase carbon nitride (g-C3N4) materials have exhibited increasingly remarkable performance as emerging electrochemiluminescence (ECL) emitters, owing to their unique optical and electronic properties; however, the ECL merits of porous g-C3N4 nanofibers doped with ternary metals are not yet explored. Deciphering the ECL properties of trimetal-doped g-C3N4 nanofibers could provide an exquisite pathway for ultrasensitive sensing and imaging with impressive advantages of minimal background signal, great sensitivity, and durability. Herein, we rationally synthesized g-C3N4 nanofibers doped atomically with Mn, Fe, and Co elements (Mn/Fe/Co/g-C3N4) in a one-pot via the protonation in ethanol and annealing process driven by the rolling up mechanism. The ECL performance of g-C3N4 with and without metal dopants was investigated and compared with standard Ru(bpy)32+ in the presence of potassium persulfate (K2S2O8) as the coreactant. Notably, g-C3N4 nanofibers doped with metal ions exhibited an ECL efficiency of 483% that was 4.83 times higher than that of Ru(bpy)32+. Mechanistic investigations unveiled that the g-C3N4 nanofibers possess a large surface area and, as a result, exhibit a reduced interfacial impedance within the porous microstructure. These factors contribute to the acceleration of charge transfer rates and the stabilization of charge carriers and excitons, ultimately facilitating the ECL process. This research endeavor may pave the way for a new hot research area and serves as a powerful tool for elucidating fundamental inquiries of ECL on one-dimensional g-C3N4 nanostructures.

Time-resolved Fluorescence DNA-based Sensors for Reducing Background Fluorescence of Environment

The fluorescence assay is one of the popular methods that is applied for detection of different targets. However, this method may show low sensitivity and high background in biological samples due to the natural fluorescence of different compounds in complicated samples. In addition, it inevitably affects the detection results accuracy. A fundamental solution to this problem is the use of the time-resolved fluorescence technique (TRF). The main component of this technique is the use of long fluorescence lifetime reagents. In this review, various time-resolved fluorescent reagents such as complexes of lanthanide ions, lanthanide-doped inorganic nanoparticles; Mn-doped ZnS quantum dots (QDs) and pyrene excimer are introduced. Moreover, TRF sensors, especially TRF aptasensors (DNA-based sensors) are discussed. This review will give new ideas for researchers to develop novel high-sensitive TRF sensors that can remove or decrease background fluorescence and use them for the detection of various targets in complicated samples without treatment.

Multifunctional Cu:ZnS quantum dots for degradation of Amoxicillin and Dye Sulphon Fast Black-F and efficient determination of urea for assessing environmental aspects

This work is particularly aimed at the preparation of ZnS and Cu doped ZnS (Cu:ZnS) QDs by facile and easy technique, chemical precipitation method for the degradation of water pollutants and a simple scheme was proposed to prepare the urea-sensing system. The morphological and optical properties of the synthesized QDs was studied using high resolution transmission and scanning electron microscopes, X-ray diffraction, energy dispersive X-ray analysis, fluorescence and ultraviolet-visible spectroscopy, differential thermal and thermogravimetric analyses, Brunauer-Emmett-Teller analysis. The photocatalytic performance was systematically assessed by the photodegradation of an important pharmaceutical water pollutant, Amoxicillin (AMX) and a dye Fast Sulphon Black F (SFBF) in aqueous medium under UV light irradiation. Also, a very sensitive system was prepared by depositing the dots over an indium-tin-oxide (ITO) glass substrate for the sensing of biologically active molecule urea as it is an important monitor of public health in water and soil productivity. The results illustrated excellent photocatalytic efficiency (86.46% for AMX and 99.41% for SFBF) with stability up to four cycles of degradation reaction. The optimal photocatalyst dosage for achieving maximum removal of AMX was found to be 70 mg at a pH of 9.5, with a treatment time of 40 min. Similarly, for SFBF, the optimal photocatalyst dosage was determined to be 60 mg at pH 9, with a treatment time of 60 min. Further, the electrochemical analysis was done by fabricating Urease enzyme (UR)/Cu:ZnS QDs/ITO bioelectrode and then the fabricated bioelectrode, was utilized to determine the different concentrations of urea by cyclic voltammetry. Thus, the obtained limit of detection and sensitivity of the fabricated biosensing device for urea detection was obtained to be 0.0092 μM and 12 μA μM-1cm-2, respectively; under the optimized experimental conditions. Hence, it is anticipated that Cu:ZnS QDs can also successfully be applied as a promising material for fabrication of novel bioelectrode for urea determination and the biosensing platform is desirable and viable.

ZnS QDs Stabilized Concurrently with Glutathione and L-cysteine for Highly Sensitive Determining Adriamycin Based on the Fluorescence Enhancement Mechanism

In this work, a facile and fast aqueous-phase synthetic method is proposed to prepare water-soluble ZnS quantum dots stabilized simultaneously with glutathione and L-cysteine (ZnS QDs-GSH/L-Cys). As-synthesized ZnS QDs-GSH/L-Cys were monodispersed spherical nanocrystals with a mean diameter of 5.0 ± 0.7 nm. Besides, the obtained ZnS QDs-GSH/L-Cys emitted more intensive blue fluorescence and exhibited an improved stability in aqueous solution compared with ZnS quantum dots merely stabilized with GSH (ZnS QDs-GSH). Interestingly, Adriamycin, a representative anticancer drug, was added into the solution of ZnS QDs-GSH/L-Cys, the blue fluorescence of ZnS QDs-GSH/L-Cys was greatly enhanced instead of being quenched, which indicated that ZnS QDs-GSH/L-Cys can be used as an enhanced-fluorescence nanoprobe for determining Adriamycin. The observed fluorescent enhancement could be attributed to the blocking of photoinduced electron transfer (PET) in ZnS QDs-GSH/L-Cys due to the electrostatic interaction between the -COO- groups on the surface of quantum dots and the -NH3+ groups in Adriamycin, followed by the coordination interaction among ZnS QDs-GSH/L-Cys and Adriamycin. The fluorescence intensity of ZnS QDs-GSH/L-Cys presented a good linear response with the concentration of Adriamycin ranging from 2.0 to 20 µg•mL-1. The proposed fluorescent nanoprobe exhibited an excellent sensitivity with the LOD of 0.1 µg•mL-1 and a good accuracy for detecting Adriamycin.

Fluorescence Turn-on Detection of Alkaline Phosphatase Activity and Al3+ Using Vitamin B6 Cofactor Conjugated GSH Capped Mn-doped ZnS Quantum Dots

The glutathione (GSH) functionalized Mn-doped ZnS quantum dots (GSH_Mn_ZnS QDs) was conjugated with pyridoxal 5'-phosphate (PLP). The -CHO group of vitamin B₆ cofactor PLP interacted with the -NH₂ group of GSH functionalized Mn_ZnS QDs. The conjugation of PLP quenched the fluorescence emission of GSH_Mn_ZnS QDs at 601 nm. Addition of alkaline phosphatase (ALP) catalytically dephosphorylated the PLP into pyridoxal that restored the fluorescence emission of GSH_Mn_ZnS QDs. With a sensitivity of 0.035 U/L, the PLP conjugated GSH_Mn_ZnS QDs was applied to quantify ALP activity in human serum and plasma. Further, the developed nanoprobe PLP conjugated GSH_Mn_ZnS QDs was also applied to detect Al³⁺. The complexation-induced fluorescence enhancement was observed at 492 nm upon the interaction of Al³⁺ with the PLP conjugated GSH_Mn_ZnS QDs. Without any interference from other tested metal ions, this nanoprobe can be employed to detect Al³⁺ down to 2.30 µM.

Preparation and properties of boron affinity molecularly imprinted mesoporous polymers based on Mn-doped ZnS quantum dots

Sialic acid (SA), known as N-acetyl neuraminic acid, is a natural 9-carbomonosaccharide derivative. SA has been widely applied in the early diagnosis of diseases as therapeutic target. However, the abundance of SA is very low in biological samples, which is usually interfered by the similar molecules coexisting at high abundance. Combining the advantages of high selectivity and specificity of molecularly imprinted technology, high specific surface area of mesoporous materials and excellent optical properties of quantum dots, we chose Mn-doped ZnS quantum dots as signal elements, and sialic acid as the template molecule. KH-4-MAPB with recognition ability to SA was synthesized by one-step hydrothermal method using thiolene click reaction as functional monomer. Based on the principle of boron affinity, molecularly imprinted polymers with highly ordered mesoporous structure were prepared, and the structure and fluorescence properties of fluorescent molecularly imprinted polymers were studied. FT-IR, XRD, TEM and nitrogen adsorption-desorption experiments were used to characterize the structure and morphology of the molecularly imprinted polymers. The results showed that the prepared molecularly imprinted polymers had highly ordered mesoporous structure and a large number of imprinted holes, which ensured the specific selectivity of the molecularly imprinted polymers. The fluorescence properties of MIMPs were characterized and analyzed by fluorescence spectra, equilibrium adsorption kinetics experiments were conducted and imprinting properties were recorded under different pH. The above experimental results showed that the fluorescence quenching was successfully achieved when the template molecule SA was captured by the molecularly imprinted polymer. When the concentration of SA was 1.25-100 × 10^-2 g/L, the fluorescence quenching degree of MIMPs showed a fine linear relationship with SA. The correlation coefficient was 0.9946, and the detection equation was F₀/F - 1 = 0.0215 [CSA] + 0.0241. MIMPs had a high recognition ability for SA, and the imprinting factor was 2.44. As a fluorescent sensor for SA, the response time of MIMPs was 20 min. When the buffer solution pH was 7, the imprinting factor was the largest. Under the best conditions, MIMPs revealed good selectivity and specificity for the fluorescence recognition of SA. MIMPS were also applied to the analysis of SA in real human serum samples with satisfactory results.

Highly selective and sensitive spectrofluorimetric method for determination of cypermethrin in different environmental samples

A sensitive, selective, and simple spectrofluorimetric method for the detection and determination of cypermethrin (CYP) in various samples based on thioglycolic acid-caped Mn-doped ZnS quantum dots (TGA@Mn-ZnS-QDs) is reported. These quantum dots were synthesized using the Gonzalez method. The synthesized quantum dots were structurally characterized with the help of different spectroscopic techniques including X-ray diffraction (XRD) and energy dispersive X-ray (EDX) techniques and fluorescence spectroscopy. The quantum dots were used for spectrofluorimetric detection and determination of CYP. The emission peak of these quantum dots at 632 nm showed a linear quenching with increasing the concentration of CYP, noticing an excellent linear relationship between F°/F values and CYP in the range of 0.5-12 µg mL^-1 with a correlation coefficient (R²) of 0.992. The influence of different physiochemical parameters such as time, pH, the concentration of quantum dots, and other pesticides interference on the fluorescence quenching was investigated. The detection limit was calculated to be 0.132 µg mL^-1. The developed method was successfully applied for the detection and determination of CYP in various spiked samples (tomato, okra, pea, spinach, soil, and water) using the spike and recovery methods. The percent recoveries of CYP from these samples were found to be 77 ± 0.05% to 95 ± 0.12% at various levels.

Auto-fluorescence of cellulose paper with spatial solid phrase dispersion-induced fluorescence enhancement behavior for three heavy metal ions detection

Auto-fluorescence of cellulose paper is often considered as an interfering fluorescence, which directly impedes the cellulose paper as a substrate material. This paper creatively explored the composition and properties of auto-fluorescence, and lignosulfonate was primarily speculated as the main source of auto-fluorescence. Surprisingly, its spatial solid phrase dispersion-induced fluorescence enhancement behavior was found. Then, cellulose paper was modified with Mn-doped ZnS quantum dots, and the prepared ratiometric fluorescent paper chip has good performances on morphology, stability, and fluorescence properties. Besides, the paper chip exhibited different fluorescence responses to three heavy metal ions in water sample. The limit of detection for Cd²⁺, Hg²⁺ and Pb²⁺ reached 1.61 nM, 0.01 nM, and 0.02 nM, respectively. In short, the molecular simulation results theoretically proved that heavy metal ions owned substitution affinity with lignosulfonate. Ultimately, this study was the first attempt to utilize paper-based auto-fluorescence, which could better accelerate the development of paper-based chips.

The role of doping strategy in nanoparticle-based electrochemiluminescence biosensing

Doping plays a crucial role in electrochemiluminescence (ECL) due to the followings: (1) Modulation of electronic structure, alteration of the surface state of nanoparticles (NPs), providing effective protection from the surrounding environment, thereby leading to ECL emitters with exceptional properties including tunable spectra, high luminescence efficiency, low excitation potential, and good stability. (2) Employment of doped NPs as promising coreactant alternatives due to the presence of functional groups such as amines induced by NP doping. (3) Serving as novel co-reaction accelerators (CRAs) for ECL through doping induced high catalytic properties. (4) Behaving as excellent carriers to load ECL emitters, recognition elements, and catalysts due to doping-induced larger surface area, higher conductivity and better biocompatibility of NPs. As a consequence, doped NPs have aroused broad interest and found wide applications in various ECL sensing platforms. In this review, the current promising improvements, concepts, and excellent applications of doped NPs for ECL biosensing are addressed. We aim to bring to light the physicochemical characteristics of various doped NPs that endow them with appealing ECL performance, leading to diverse applications in biosensing.

Improving photocatalytic activity of the ZnS QDs via lanthanide doping and photosensitizing with GO and g-C3N4 for degradation of an azo dye and bisphenol-A under visible light irradiation

In this research, insertion of Gd ions (2 wt%) into the crystalline lattice of the ZnS QDs enhanced the photocatalytic activity of the QDs. In addition, the influence of graphene oxide (GO) and graphitic carbon nitride (g-C₃N₄) was assessed on the photocatalytic activity of the ZnS QDs through degradation of acid red 14 (AR14) and bisphenol-A (BA) under visible light. Higher photocatalytic degradation efficiency (97.1% for AR14 and 67.4% for BA within 180 min) and higher total organic carbon (TOC) removal (67.1% for AR14 and 59.2% for BA within 5 h) was achieved in the presence of ZnS QDs/g-C₃N₄ compared with ZnS QDs/GO nanocomposite. Finally, the Gd-doped ZnS QDs were hybridized with g-C₃N₄ as optimal support to fabricate a potent visible-light-driven photocatalyst for the decomposition of organic contaminants. The maximum photocatalytic degradation of 99.1% and 80.5% were achieved for AR14 and BA, respectively, in the presence of Gd-doped ZnS QDs/g-C₃N₄ nanocomposite. The photosensitization mechanism was suggested for the improved photocatalytic activity of the ZnS QDs/GO, ZnS QDs/g-C₃N₄, and Gd-doped ZnS QDs/g-C₃N₄ nanocomposites under visible light.

Nanomaterials for fluorescent detection of curcumin

Owing to the attractive biological and pharmacological activities, sensitive and selective detection of curcumin is of great significance. Nanomaterials possessing unique optical properties exhibit potential applications in the fluorescent detection of curcumin. This review first discussed the detection strategies of fluorescent nanosensors. In the subsequent section, we highlighted the recent advances of different nanomaterials for fluorescent detection of curcumin, including semiconductor QDs, lanthanide upconversion nanoparticles, fluorescent metal nanoclusters, and carbon quantum dots. And we further provided the merits of fluorescent nanosensors for curcumin. Lastly, the challenges and further directions were presented.

Synthetic Approaches, Modification Strategies and the Application of Quantum Dots in the Sensing of Priority Pollutants

Polycyclic aromatic hydrocarbons (PAHs) and nitro-aromatic compounds (NACs) are two classifications of environmental pollutants that have become a source of health concerns. As a result, there have been several efforts towards the development of analytical methods that are efficient and affordable that can sense these pollutants. In recent decades, a wide range of techniques has been developed for the detection of pollutants present in the environment. Among these different techniques, the use of semiconductor nanomaterials, also known as quantum dots, has continued to gain more attention in sensing because of the optical properties that make them useful in the identification and differentiation of pollutants in water bodies. Reported studies have shown great improvement in the sensing of these pollutants. This review article starts with an introduction on two types of organic pollutants, namely polycyclic aromatic hydrocarbons and nitro-aromatic explosives. This is then followed by different quantum dots used in sensing applications. Then, a detailed discussion on different groups of quantum dots, such as carbon-based quantum dots, binary and ternary quantum dots and quantum dot composites, and their application in the sensing of organic pollutants is presented. Different studies on the comparison of water-soluble quantum dots and organic-soluble quantum dots of a fluorescence sensing mechanism are reviewed. Then, different approaches on the improvement of their sensitivity and selectivity in addition to challenges associated with some of these approaches are also discussed. The review is concluded by looking at different mechanisms in the sensing of polycyclic aromatic hydrocarbons and nitro-aromatic compounds.

Development of QDs-based nanosensors for heavy metal detection: A review on transducer principles and in-situ detection

Heavy metal pollution has severe threats to the ecological environment and human health. Thus, it is urgent to achieve the rapid, selective, sensitive and portable detection of heavy metal ions. To overcome the defects of traditional methods such as time-consuming, low sensitivity, high cost and complicated operation, QDs (Quantum dots)-based nanomaterials have been used in sensors to significantly improve the sensing performance. Due to their excellent physicochemical properties, high specific surface area, high adsorption and reactive capacity, nanomaterials could act as potential probes or offer enhanced sensitivity and create a promising nanosensors platform. In this review, the rapidly advancing types of QDs for heavy metal ions detection are first summarized. Modified with ligands, nanomaterials, or biomaterials, QDs are assembled on sensors by the interaction of electrostatic adsorption, chemical bonding, steric hindrance, and base-pairing. The stability of QDs-based nanosensors is improved by doping the elements to QDs, providing the reference substance, optimizing the assemble strategies and so on. Then, according to transducer principles, the two most typical sensor categories based on QDs: optical and electrochemical sensors are highlighted to be discussed. In the meanwhile, portable devices combining with QDs to adapt the practical detection in complex situations are summarized. The deficiencies and future challenges of QDs in toxicity, specificity, portability, multi-metal co-detection and degradation during the detection are also pointed out. In the end, the development trends of QDs-based nanosensors for heavy metal ions detection are discussed. This review presents an overall understanding, recent advances, current challenges and future outlook of QDs-based nanosensors for heavy metal detection.

Solochrome Dark Blue Azo Dye Removal by Sonophotocatalysis Using Mn2+ Doped ZnS Quantum Dots

This work investigates the degradation of the azo dye solochrome dark blue (SDB) by measurement of the photocatalytic, sonocatalytic and sonophotocatalytic activities, under low ultrasonic frequency (40 kHz) and UV-C (254 nm) light, using Mn-doped ZnS semiconductor quantum dots (Mn2+:ZnS Qds) as catalysts, prepared by a simple chemical precipitation procedure. In order to study the different morphological and optical crystal properties, various characterization techniques were used, such as high resolution transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, N2 adsorption-desorption at −196 °C and ultraviolet-visible spectroscopy. The average particle size of the semiconductor Qds was in the range of 3–4 nm. The optimal parameters affecting dye degradation, such as the catalyst loading, solution pH, time of irradiation, initial concentration of dye, dopant concentration, ultrasonic power and frequency effect were evaluated. The synthesized catalytic material exhibited a high activity for sonophotocatalytic degradation of SDB (89%), larger than that observed for sonocatalysis (69.7%) or photocatalysis (55.2%) alone, which was due to the improved electron-holes separation, formation of more reactive radicals and enhancement of the active surface area. Qds showed good stability and reusability after five repeated cycles. Finally, the degradation products were identified by liquid chromatography-mass spectrometry (LC-MS).

Enhanced selectivity and sensitivity for colorimetric determination of glyphosate using Mn-ZnS quantum dot embedded molecularly imprinted polymers combined with a 3D-microfluidic paper-based analytical device

We report a novel three-dimensional microfluidic paper-based analytical device (3D-μPAD) with colorimetric detection, using Mn-ZnS quantum dot embedded molecularly imprinted polymer (Mn-ZnS QD-MIP), for selective glyphosate determination in whole grain samples. Detection is based on the catalytic activity of Mn-ZnS QD-MIP in the H₂O₂ oxidation of ABTS. Glyphosate imprinted polymer is successfully synthesized on the Mn-ZnS QD surface using a poly (N-isopropylacrylamide) (NIPAM) and N, N'-Methylenebisacrylamide (MBA) as the functional monomers. The catalytic activity depends on binding or non-binding of glyphosate molecules on the synthetic recognition sites of the Mn-ZnS QD-MIP. Glyphosate selectively binds to the cavities embedded on the Mn-ZnS QD surface, and subsequently turns-off or inhibits the ABTS oxidation and color change to light green. The change of reaction color from dark green to light green depends on the concentration of glyphosate. We report, for the first time, using the relatively new penguard enamel colour to create a hydrophobic barrier. The foldable 3D-μPAD comprises three layers (top/center/bottom), named as the detection zone, immobilized Mn-ZnS QD-MIP disc, and sample loading. Assay on the 3D-μPAD can determine glyphosate by ImageJ detection, over an operating range of 0.005-50 μg mL^-1 and with a detection limit of 0.002 μg mL^-1. Our 3D-μPAD exhibits high accuracy, with a 0.4% (intra-day) and 0.7% (inter-day) relative difference from the certified CRM value. Moreover, the fabricated 3D-μPAD provides good reproducibility (1.7% RSD for ten devices). The developed 3D-μPAD was successfully applied to determine the glyphosate concentration in whole grain samples and shows great promise as an alternative highly selective and sensitive colorimetric method. The 3D-μPAD is well suited to food-quality control and onsite environmental-monitoring applications, without sophisticated instrumentation.

Assessing the Photocatalytic Degradation of Fluoroquinolone Norfloxacin by Mn:ZnS Quantum Dots: Kinetic Study, Degradation Pathway and Influencing Factors

Norfloxacin (NOFX), a broadly used fluoroquinolone antibiotic, has been a subject of great concern in the past few years due to its undesirable effect on human beings and aquatic ecosystems. In this study, novel Mn doped ZnS (Mn:ZnS) quantum dots (QDs) were prepared through a facile chemical precipitation method and used as photocatalysts for NOFX degradation. Prior to photodegradation experiments, morphological and optical parameters of the QDs were examined through transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray analysis, Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, fluorescence spectroscopy, Brunauer-Emmett-Teller analysis, and differential thermal and thermogravimetric analyses. Mn:ZnS QDs exhibited excellent properties of photodegradation, not only under UV irradiation but also in sunlight, which induced NOFX to photodegrade. The utmost photodegradation efficiency was obtained under optimal conditions (25 mL of NOFX, 15 mg/L, pH 10, 60 min UV irradiation, 60 mgs QDs), adopting first order kinetics. In addition, hydroxyl radicals produced by the conduction band electrons were found to be the primary reason dominating the transformation of NOFX in basic conditions, while holes, oxygen atoms, as well as the doped metal (Mn) enhanced the degradation. The QDs showed excellent reusability and stability in four repeated cycles. Finally, four different pathways were predicted, derived from the identified intermediates, with piperazinyl ring transformation being the primary one. It is expected that the synthesized Mn:ZnS QDs could be utilized as efficient photocatalytic materials for energy conversion and ecological remediation.