A single drop histamine sensor based on AuNPs/MnO2 modified screen-printed electrode

Three-dimensional Au-MnO2 nanostructure as an agent of synergistic cancer therapy: chemo-/photodynamic and photothermal approaches

The design of multimodal cancer therapy was focused on reaching an efficient process and minimizing harmful effects on patients. In the present study, the Au-MnO2 nanostructures have been successfully constructed and produced as novel multipurpose photosensitive agents simultaneously for photodynamic therapy (PDT), photothermal therapy (PTT), and chemodynamic therapy (CDT). The prepared AuNPs were conjugated with MnO2 NPs by its participation in the thermal decomposition process of KMnO4 confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy (FT-IR). The 16.5 nm Au-MnO2 nanostructure exhibited an absorbance at 438 nm, which is beneficial for application in light induction therapy due to the NIR band, as well as its properties of generating reactive oxygen species (ROS) associated with the 808 nm laser light for PDT. The photothermal transduction efficiency was calculated and compared with that of the non-irradiated nanostructure, in which it was found that the 808 nm laser induced a high efficiency of 83%, 41.5%, and 37.5% for PDT, PTT, and CDT, respectively. The results of DPBF and TMB assays showed that the efficiency of PDT and PTT was higher than that of CDT. The nanostructure also confirmed the time-dependent peroxidase properties at different H2O2, TMB, and H2TMB concentrations, promising good potency in applying nanomedicine in clinical cancer therapy.

Design of manganese-based nanomaterials for pharmaceutical and biomedical applications

In the past few years, manganese-based nanostructures have been extensively investigated in the biomedical field particularly to design highly biocompatible theranostics, which can not only act as efficient diagnostic imaging contrast agents but also deliver the drugs to the target sites. The nanoscale size, large surface area-to-volume ratio, availability of cheap precursors, flexibility to synthesize nanostructures with reproducible properties and high yield, and easy scale up are the major reasons for the attraction towards manganese nanostructures. Along with these properties, the nontoxic nature, pH-sensitive degradation, and easy surface functionalization are additional benefits for the use of manganese nanostructures in biomedical and pharmaceutical sciences. Therefore, in this review, we discuss the recent progress made in the synthesis of manganese nanostructures, describe the attempts made to modify their surfaces to impart biocompatibility and stability in biological fluids, and critically discuss their use in magnetic resonance imaging, drug and gene delivery, hyperthermia, photothermal/photodynamic, immunotherapy, biosensing and tumor diagnosis.

A do-it-yourself electrochemical cell based on pencil leads and transparency sheets: Application to the enzymatic determination of histamine

The availability of more efficient analytical methods that answer the world's demands is a challenge and their development continues to be a difficult task. In this work the construction of an electrochemical cell, based on low-cost and accessible materials, that can be easily constructed and used for electroanalytical purposes, is described. Pencil leads were used as electrodes and a transparency sheet as the base. This cell was used as transducer for developing an amperometric biosensor for the quantification of histamine, which is the only biogenic amine regulated by law. The analysis was based on the use of diamine oxidase as biorecognition element, hexacyanoferrate(III) as electron-transfer mediator, and chronoamperometry, at +0.5 V during 100 s, to record the analytical signal. A linear relationship between histamine concentration and the analytical signal was established between 5.0 and 35 mg L-1 and a low limit of detection (1.0 mg L-1) was achieved. The analysis of different fish species (sardine and tuna) was performed, obtaining recovery values between 102% and 110%. The stability of the sensor is noteworthy: it maintained 95% of the initial analytical signal after 15 days.

Nanomaterials-based biosensor and their applications: A review

A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

The development of an electropolymerized, molecularly imprinted polymer (MIP) sensor for insulin determination using single-drop analysis

An electrochemical sensor for the detection of insulin in a single drop (50 μL) was developed based on the concept of molecularly imprinted polymers (MIP). The synthetic MIP receptors were assembled on a screen-printed carbon electrode (SPCE) by the electropolymerization of pyrrole (Py) in the presence of insulin (the protein template) using cyclic voltammetry. After electropolymerization, insulin was removed from the formed polypyrrole (Ppy) matrix to create imprinting cavities for the subsequent analysis of the insulin analyte in test samples. The surface characterization, before and after each electrosynthesis step of the MIP sensors, was performed using atomic force microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The performance of the developed MIP-SPCE sensor was evaluated using a single drop of solution containing K₃Fe(CN)₆ and the square-wave voltammetry technique. The MIP-SPCE showed a linear concentration range of 20.0-70.0 pM (R² = 0.9991), a limit of detection of 1.9 pM, and a limit of quantification of 6.2 pM. The rapid response time to the protein target and the portability of the developed sensor, which is considered a disposable MIP-based system, make this MIP-SPCE sensor a promising candidate for point-of-care applications. In addition, the MIP-SPCE sensor was successfully used to detect insulin in a pharmaceutical sample. The sensor was deemed to be accurate (the average recovery was 108.46%) and precise (the relative standard deviation was 7.23%).

In situ engineering of Au-Ag alloy embedded PEDOT nanohybrids at a solvent/non-solvent interface for the electrochemical enzyme-free detection of histamine

Steadfast efforts have been made to develop novel materials and incorporate them into functional devices for practical applications, pushing the research on electroactive materials to the forefront of nano electronics. Liquid/liquid interface-assisted polymerization offers a scalable methodology to fabricate hybrid materials with multifunctional applications, in contrast to the conventional and ubiquitous routes. Here, we explored this efficient and versatile approach toward the in situ tailoring of Au-Ag alloy nanostructures with a conducting polymer, poly(3,4-ethylene-dioxythiophene) (PEDOT). With the appropriate choice of organic and inorganic phases for the distribution of monomer and oxidant, the miscibility restraints of the reactants in a single phase were alleviated. Effective nanostructure tuning of highly crystalline and electroactive PEDOT/Au-Ag alloy has been achieved by varying the molar ratio of Au³⁺/Ag⁺ in the reaction mixture. The as-synthesized composite is further explored to detect neuromodulator histamine (HA), which displays high sensitivity with a limit of detection (LOD) of 1.5 nM, and selectivity even in the presence of various interfering analogs of 10-fold concentration. Subsequently, density functional theory (DFT) simulations are employed to assess the mode of interaction between HA and the electroactive surfaces. The competency to detect HA in preserved food entails its potential in food spoilage monitoring. Furthermore, the detection of histamine generated by sub-cultured human neuronal cells SH-SY5Y proves its practical viability in health monitoring devices.

Electrochemical Determination of Morphine in Urine Samples by Tailoring FeWO4/CPE Sensor

Morphine (MORPH) is natural alkaloid and mainly used as a pain reliever. Its monitoring in human body fluids is crucial for modern medicine. In this paper, we have developed an electrochemical sensor for submicromolar detection of MORPH. The sensor is based on modified carbon paste electrode (CPE) by investigating the Fe_xW_1-xO₄ ratio in iron tungstate (FeWO₄), as well as the ratio of this material in CPE. For the first time, the effect of the iron-tungsten ratio in terms of achieving the best possible electrochemical characteristics for the detection of an important molecule for humans was examined. Morphological and electrochemical characteristics of materials were studied. The best results were obtained using Fe₁W₃ and 7.5% of modifier in CPE. For MORPH detection, square wave voltammetry (SWV) was optimized. Under the optimized conditions, Fe₁W₃@CPE resulted in limit of detection (LOD) of the method of 0.58 µM and limit of quantification (LOQ) of 1.94 µM. The linear operating range between 5 and 85 µM of MORPH in the Britton-Robinson buffer solution (BRBS) at pH 8 as supporting electrolyte was obtained. The Fe₁W₃@CPE sensor resulted in good selectivity and excellent repeatability with relative standard deviation (RSD) and was applied in real-world samples of human urine. Application for direct MORPH detection, without tedious sample pretreatment procedures, suggests that developed electrochemical sensor has appeared to be a suitable competitor for efficient, precise, and accurate monitoring of the MORPH in biological fluids.

An ultrasensitive electrochemical sensor based on in situ synthesized manganese dioxide/gold nanoparticles nanocomposites for rapid detection of methylmercury in foodstuffs

The inclusion of methylmercury (CH₃Hg⁺) in the environment and food chain has aroused wide concern due to its high neurotoxicity and cumulative effects. Herein, a highly sensitive electrochemical sensor based on manganese dioxide (MnO₂)/gold nanoparticles (AuNPs) composites is fabricated for CH₃Hg⁺ detection in food. The MnO₂/AuNPs nanocomposites were synthesized in situ on the surface of a glassy carbon electrode by an electrodeposition method and were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The resulting MnO₂/AuNPs modified electrode exhibited a large active surface area, enhanced conductivity and excellent electrocatalytic activity toward CH₃Hg⁺ due to the synergistic effect of MnO₂ and AuNPs. Square wave anodic stripping voltammetry (SWASV) was used as the sensing technique for CH₃Hg⁺, and the stripping peak current showed a good linear relationship with CH₃Hg⁺ concentration in the range of 0.7-15 μg L^-1 with a detection limit of 0.051 μg L^-1. Besides, the interference from Hg²⁺ associated with CH₃Hg⁺ detection can be avoided by the addition of diethylene triamine pentaacetic acid (DTPA). The as-prepared sensor was applied to detect CH₃Hg⁺ in various food samples with satisfactory recoveries, thus providing a promising platform for rapid screening of methylmercury residues.

Electrochemical Sensor Based on ZnFe2O4/RGO Nanocomposite for Ultrasensitive Detection of Hydrazine in Real Samples

We have developed a highly sensitive sensor of ZnFe₂O₄/reduced graphene oxide (ZnFe₂O₄/RGO) nanocomposite for electrochemical detection of hydrazine, fabricated by a simple hydrothermal protocol. Subsequently, a screen-printed electrode (SPE) surface was modified with the proposed nanocomposite (ZnFe₂O₄/RGO/SPE), and revealed an admirable electrocatalytic capacity for hydrazine oxidation. The ZnFe₂O₄/RGO/SPE sensor could selectively determine micromolar hydrazine concentrations. The as-produced sensor demonstrated excellent ability to detect hydrazine due to the synergistic impacts of the unique electrocatalytic capacity of ZnFe₂O₄ plus the potent physicochemical features of RGO such as manifold catalytic sites, great area-normalized edge-plane structures, high conductivity, and large surface area. The hydrazine detection using differential pulse voltammetry exhibited a broad linear dynamic range (0.03–610.0 µM) with a low limit of detection (0.01 µM).

Epitope-imprinted polydopamine electrochemical sensor for ovalbumin detection

A novel, sensitive and selective electrochemical sensor based on epitope-imprinted polydopamine (PDA) was developed for ovalbumin (OVA) detection. Molecularly imprinted polydopamine was synthesized on an AuNP-coated screen-printed carbon electrode (SPCE) via electropolymerization in the presence of OVA IgE-binding epitope as the template. Key process parameters including template concentration, electropolymerization cycle, pH, time required for template removal and rebinding were optimized. Electrochemical detection of OVA was performed by differential pulse voltammetry (DPV) in 5 mM K₃Fe(CN)₆ and 0.1 M KCl as the supporting electrolyte. Under optimized conditions, the sensor demonstrated excellent sensitivity toward OVA with linear range from 23.25 to 232.50 nM (1 to 10 ppm), limit of detection (LOD) of 10.76 nM (0.46 ppm), and limit of quantification (LOQ) of 35.87 nM (1.54 ppm). The sensor also exhibited good selectivity against other proteins such as human serum albumin (HSA), bovine serum albumin (BSA), and lysozyme (LYZ). OVA in wine samples was detected with RSD of 5.63-10.82%, and recovery percentage of 104.74-105.96%. The developed method can be easily adapted to detect other allergic proteins in the food supply chain.