A fast multi-source information fusion strategy based on FTIR spectroscopy for geographical authentication of wild Gentiana rigescens

Influence of heating temperatures and storage on the odor of duck meat and identification of characteristic odorous smell compounds

To clarify the characteristic odor of compounds present in duck meat, especially reheating after storage, the effect of duck breast cooked at three temperatures (90 °C, 100 °C, 105 °C) and reheating after 7 days of storage was studied. Electronic nose analysis and sensory evaluation revealed a significant increase (p < 0.05) in reheated duck meat odor after 7 days of storage. The 90 °C treatment group had the heaviest odor, which increased by 12.19 % after seven days of storage. Using headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS), 60 volatile flavor compounds were identified across various groups. Although the volatile compounds were consistent among different groups, their relative contents varied. By combining the sensory evaluation results with the Relative Odor Activity Value (ROAV) of these flavor compounds, chemometric orthogonal partial least squares discriminant analysis (OPLS-DA) was used to identify the following 9 characteristic volatile compounds: 2-methylbutanal, pentanal, octanal, heptanal, hexanal, (E)-2-octenal, (E)-2-nonenal, and 2-pentyl furan.

Using Pharmacokinetic-Pharmacodynamic Modeling to Study the Main Active Substances of the Anticancer Effect in Mice from Panax ginseng-Ophiopogon japonicus

Ginseng Radix et Rhizoma Rubra (Panax ginseng C.A. Mey, Hongshen, in Chinese) and Ophiopogonis Radix (Ophiopogon japonicus (L.f) Ker-Gawl., Maidong, in Chinese) are traditional Chinese herbal pairs, which were clinically employed to enhance the immune system of cancer patients. This study employed the pharmacokinetic and pharmacodynamic (PK-PD) spectrum-effect association model to investigate the antitumor active substances of P. ginseng and O. japonicus (PG-OJ). The metabolic processes of 20 major bioactive components were analyzed using Ultra-Performance Liquid Chromatography-Mass Spectrometry/Mass Spectrometry (UPLC-MS/MS) in the lung tissue of tumor-bearing mice treated with PG-OJ. The ELISA method was employed to detect the levels of TGF-β1, TNF-α, and IFN-γ in the lung tissue of mice at various time points, and to analyze their changes after drug administration. The results showed that all components presented a multiple peaks absorption pattern within 0.083 to 24 h post-drug administration. The tumor inhibition rate of tumor and repair rate of IFN-γ, TNF-α, and TGF-β1 all increased, indicating a positive therapeutic effect of PG-OJ on A549 tumor-bearing mice. Finally, a PK-PD model based on the GBDT algorithm was developed for the first time to speculate that Methylophiopogonanone A, Methylophiopogonanone B, Ginsenoside Rb1, and Notoginsenoside R1 are the main active components in PG-OJ for lung cancer treatment.

Network pharmacology and fingerprint for the integrated analysis of mechanism, identification and prediction in Panax notoginseng

INTRODUCTION

Panax notoginseng (Burkill) F. H. Chen ex C. H. Chow, is a well-known herb with multitudinous efficacy. In this study, a series of overall analyses on the action mechanism, component content, origin identification, and content prediction of P. notoginseng are conducted.

OBJECTIVES

The purpose was to analyse the mechanism of pharmacological efficacy, differences between contents and groups of P. notoginseng from different origins, and to identify the origin and predict the content.

MATERIALS AND METHODS

The P. notoginseng samples from four different origins were used for analysis by the database, network pharmacology (Q-marker) and fingerprint analysis [high-performance liquid chromatography (HPLC), attenuated total reflectance Fourier-transform infrared (ATR-FTIR) and near-infrared (NIR)] combined with data fusion strategy (low- and feature-level).

RESULTS

Four saponins were identified as Q-markers, and exerted pharmacological effects on signalling pathways through 24 core targets. The qualitative and quantitative analysis of HPLC showed that there were differences among groups and different origins. Therefore, considering the need to treat diseases, combined with network database and network pharmacology, the suitable producing areas were determined through the mechanism of action and the required saponin content. The low-level data fusion successfully identified the origin and predicted the content of P. notoginseng from different origins. The accuracy rate of each evaluation index of the partial least squares discriminant analysis (PLS-DA) model was 1, and the t-SNE (t-distributed stochastic neighbor embedding) visualisation results were good. The coefficient of determination (R2 ) of the partial least squares regression (PLSR) model ranged from 0.9235-0.9996, and the root mean square error of cross-validation (RMSECV) and root mean square error of prediction (RMSEP) range is 0.301-1.519.

CONCLUSION

This study was designed to provide a sufficient theoretical basis for the quality control of P. notoginseng.

Quality assessment of traditional Chinese medicine based on data fusion combined with machine learning: A review

The authenticity and quality of traditional Chinese medicine (TCM) directly impact clinical efficacy and safety. Quality assessment of traditional Chinese medicine (QATCM) is a global concern due to increased demand and shortage of resources. Recently, modern analytical technologies have been extensively investigated and utilized to analyze the chemical composition of TCM. However, a single analytical technique has some limitations, and judging the quality of TCM only from the characteristics of the components is not enough to reflect the overall view of TCM. Thus, the development of multi-source information fusion technology and machine learning (ML) has further improved QATCM. Data information from different analytical instruments can better understand the connection between herbal samples from multiple aspects. This review focuses on the use of data fusion (DF) and ML in QATCM, including chromatography, spectroscopy, and other electronic sensors. The common data structures and DF strategies are introduced, followed by ML methods, including fast-growing deep learning. Finally, DF strategies combined with ML methods are discussed and illustrated for research on applications such as source identification, species identification, and content prediction in TCM. This review demonstrates the validity and accuracy of QATCM-based DF and ML strategies and provides a reference for developing and applying QATCM methods.

Trends in digital detection for the quality and safety of herbs using infrared and Raman spectroscopy

Herbs have been used as natural remedies for disease treatment, prevention, and health care. Some herbs with functional properties are also used as food or food additives for culinary purposes. The quality and safety inspection of herbs are influenced by various factors, which need to be assessed in each operation across the whole process of herb production. Traditional analysis methods are time-consuming and laborious, without quick response, which limits industry development and digital detection. Considering the efficiency and accuracy, faster, cheaper, and more environment-friendly techniques are highly needed to complement or replace the conventional chemical analysis methods. Infrared (IR) and Raman spectroscopy techniques have been applied to the quality control and safety inspection of herbs during the last several decades. In this paper, we generalize the current application using IR and Raman spectroscopy techniques across the whole process, from raw materials to patent herbal products. The challenges and remarks were proposed in the end, which serve as references for improving herb detection based on IR and Raman spectroscopy techniques. Meanwhile, make a path to driving intelligence and automation of herb products factories.

Non-Targeted Analytical Technology in Herbal Medicines: Applications, Challenges, and Perspectives

Herbal medicines (HMs) have been utilized to prevent and treat human ailments for thousands of years. Especially, HMs have recently played a crucial role in the treatment of COVID-19 in China. However, HMs are susceptible to various factors during harvesting, processing, and marketing, affecting their clinical efficacy. Therefore, it is necessary to conclude a rapid and effective method to study HMs so that they can be used in the clinical setting with maximum medicinal value. Non-targeted analytical technology is a reliable analytical method for studying HMs because of its unique advantages in analyzing unknown components. Based on the extensive literature, the paper summarizes the benefits, limitations, and applicability of non-targeted analytical technology. Moreover, the article describes the application of non-targeted analytical technology in HMs from four aspects: structure analysis, authentication, real-time monitoring, and quality assessment. Finally, the review has prospected the development trend and challenges of non-targeted analytical technology. It can assist HMs industry researchers and engineers select non-targeted analytical technology to analyze HMs' quality and authenticity.

ResNet Model Automatically Extracts and Identifies FT-NIR Features for Geographical Traceability of Polygonatum kingianum

Medicinal plants have incredibly high economic value, and a practical evaluation of their quality is the key to promoting industry development. The deep learning model based on residual convolutional neural network (ResNet) has the advantage of automatic extraction and the recognition of Fourier transform near-infrared spectroscopy (FT-NIR) features. Models are difficult to understand and interpret because of unknown working mechanisms and decision-making processes. Therefore, in this study, artificial feature extraction methods combine traditional partial least squares discriminant analysis (PLS-DA) and support vector machine (SVM) models to understand and compare deep learning models. The results show that the ResNet model has significant advantages over traditional models in feature extraction and recognition. Secondly, preprocessing has a great impact on the feature extraction and feature extraction, and is beneficial for improving model performance. Competitive adaptive reweighted sampling (CARS) and variable importance in projection (VIP) methods screen out more feature variables after preprocessing, but the number of potential variables (LVs) and successive projections algorithm (SPA) methods obtained is fewer. The SPA method only extracts two variables after preprocessing, causing vital information to be lost. The VIP feature of traditional modelling yields the best results among the four methods. After spectral preprocessing, the recognition rates of the PLS-DA and SVM models are up to 90.16% and 88.52%. For the ResNet model, preprocessing is beneficial for extracting and identifying spectral image features. The ResNet model based on synchronous two-dimensional correlation spectra has a recognition accuracy of 100%. This research is beneficial to the application development of the ResNet model in foods, spices, and medicinal plants.

Anticoagulant activity analysis and origin identification of Panax notoginseng using HPLC and ATR-FTIR spectroscopy

INTRODUCTION

Panax notoginseng is one of the traditional precious and bulk-traded medicinal materials in China. Its anticoagulant activity is related to its saponin composition. However, the correlation between saponins and anticoagulant activities in P. notoginseng from different origins and identification of the origins have been rarely reported.

OBJECTIVES

We aimed to analyze the correlation of components and activities of P. notoginseng from different origins and develop a rapid P. notoginseng origin identification method.

MATERIALS AND METHODS

Pharmacological experiments, HPLC, and ATR-FTIR spectroscopy (variable selection) combined with chemometrics methods of P. notoginseng main roots from four different origins (359 individuals) in Yunnan Province were conducted.

RESULTS

The pharmacological experiments and HPLC showed that the saponin content of P. notoginseng main roots was not significantly different. It was the highest in main roots from Wenshan Prefecture (9.86%). The coagulation time was prolonged to observe the strongest effect (4.99 s), and the anticoagulant activity was positively correlated with the contents of the three saponins. The content of ginsenoside Rg₁ had the greatest influence on the anticoagulant effect. The results of spectroscopy combined with chemometrics show that the variable selection method could extract a small number of variables containing valid information and improve the performance of the model. The variable importance in projection has the best ability to identify the origins of P. notoginseng; the accuracy of the training set and the test set was 0.975 and 0.984, respectively.

CONCLUSION

This method is a powerful analytical tool for the activity analysis and identification of Chinese medicinal materials from different origins.

Practical Qualitative Evaluation and Screening of Potential Biomarkers for Different Parts of Wolfiporia cocos Using Machine Learning and Network Pharmacology

Wolfiporia cocos is a widely used traditional Chinese medicine and dietary supplement. Artificial intelligence algorithms use different types of data based on the different strategies to complete multiple tasks such as search and discrimination, which has become a trend to be suitable for solving massive data analysis problems faced in network pharmacology research. In this study, we attempted to screen the potential biomarkers in different parts of W. cocos from the perspective of measurability and effectiveness based on fingerprint, machine learning, and network pharmacology. Based on the conclusions drawn from the results, we noted the following: (1) exploratory analysis results showed that differences between different parts were greater than those between different regions, and the partial least squares discriminant analysis and residual network models were excellent to identify Poria and Poriae cutis based on Fourier transform near-infrared spectroscopy spectra; (2) from the perspective of effectiveness, the results of network pharmacology showed that 11 components such as dehydropachymic acid and 16α-hydroxydehydrotrametenolic acid, and so on had high connectivity in the “component-target-pathway” network and were the main active components. (3) From a measurability perspective, through orthogonal partial least squares discriminant analysis and the variable importance projection > 1, it was confirmed that three components, namely, dehydrotrametenolic acid, poricoic acid A, and pachymic acid, were the main potential biomarkers based on high-performance liquid chromatography. (4) The content of the three components in Poria was significantly higher than that in Poriae cutis. (5) The integrated analysis showed that dehydrotrametenolic acid, poricoic acid A, and pachymic acid were the potential biomarkers for Poria and Poriae cutis. Overall, this approach provided a novel strategy to explore potential biomarkers with an explanation for the clinical application and reasonable development and utilization in Poria and Poriae cutis.

Vibrational Spectroscopy Combined with Chemometrics in Authentication of Functional Foods

Many foods have both edible and medical importance and are appreciated as functional foods, preventing diseases. However, due to unscrupulous vendors and imperfect market supervision mechanisms, curative foods are prone to adulteration or some other events that harm the interests of consumers. However, traditional analytical methods are unsuitable and expensive for a broad and complex application. Therefore, people urgently need a fast, efficient, and accurate detection method to protect self-interests. Recently, the study of target samples by vibration spectrum shows strong qualitative and quantitative ability. The model established by platform technology combined with the stoichiometric analysis method can obtain better parameters, which it has good robustness and can detect functional food efficiently, quickly and nondestructive. The review compared and prospect five different vibrational spectroscopic techniques (near-infrared, Fourier transform infrared, Raman, hyperspectral imaging spectroscopy and Terahertz spectroscopy). In order to better solve some of the actual situations faced by certification, we explore and through relevant research and investigation to appropriately highlight the applicability and importance of technology combined with chemometrics in functional food authentication. There are four categories of authentication discussed: functional food authenticated in source, processing method, fraud and ingredient ratio. This paper provides an innovative process for the authentication of functional food, which has a meaningful reference value for future review or scientific research of relevant departments.

Screening of specific quantitative peptides of beef by LC-MS/MS coupled with OPLS-DA

A rapid, simple, and efficient analysis methodology for screening specific quantitative peptides of beef was established based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) coupled with orthogonal partial least squares-discriminant analysis (OPLS-DA). The OPLS-DA model was built to select species-specific peptides that make a significant contribution to classification. Peptides with statistical significance were selected based on the variable importance in the projection (VIP) values and univariate P values. After the workflow of the statistical process, three specific quantitative peptides were identified by using homemade products with different beef contents. A quantification method for selected specific quantitative peptides was established by using LC-MS/MS. The quantitative results were applied to commercialized beef products. The developed method has high sensitivity, specificity, and repeatability. The results of this study proved that the integration of LC-MS/MS coupled with OPLS-DA is an efficient method for screening specific quantitative peptides and identification of the authenticity of meat products.

Verified the rapid evaluation of the edible safety of wild porcini mushrooms, using deep learning and PLS-DA

BACKGROUND

How to quickly identify poisonous mushrooms is a worldwide problem, because poisonous mushrooms and edible mushrooms have very similar appearances. Even some edible mushrooms must be processed further before they can be eaten. In addition, mushrooms from different geographical origins contain different levels of heavy metals. Eating frequent mushrooms with excessive heavy metal content can also cause food poisoning. This information is very important and needs to be informed to consumers in advance. Through the demand for the safety of porcini mushrooms in the Yunnan area we propose a hierarchical identification system based on Fourier-transform near-infrared (FT-NIR) spectroscopy to evaluate the edible safety of porcini species.

RESULTS

We found that deep learning is the most effective means to identify the edible safety of porcini, and the recognition accuracy was 100%, by comparing two pattern recognition tools, deep learning and partial least square discriminant analysis (PLS-DA). Although the accuracy of the PLS-DA test set is 96.10%, the poisonous porcini is not allowed to be wrongly judged. In addition, the cadmium (Cd) content of Leccinum rugosiceps in the Midu area exceeded the standard. Deep learning can trace Le. rugosiceps geographic origin with an accuracy of 100%.

CONCLUSION

The overall results show that deep learning methods based on FT-NIR can identify porcini that is at risk of being eaten. This has useful application prospects in food safety. © 2021 Society of Chemical Industry.

Authentication of Herbal Medicines Based on Modern Analytical Technology Combined with Chemometrics Approach: A Review

Since ancient times, herbal medicines (HMs) have been widely popular with consumers as a "natural" drug for health care and disease treatment. With the emergence of problems, such as increasing demand for HMs and shortage of resources, it often occurs the phenomenon of shoddy exceed and mixing the false with the genuine in the market. There is an urgent need to evaluate the quality of HMs to ensure their important role in health care and disease treatment, and to reduce the possibility of threat to human health. Modern analytical technology is can be analyzed for analyzing chemical components of HMs or their preparations. Reflecting complex chemical components' characteristic curves in the analysis sample, and the comprehensive effect of active ingredients of HMs. In this review, modern analytical technology (chromatography, spectroscopy, mass spectrometry), chemometrics methods (unsupervised, supervised) and their advantages, disadvantages, and applicability were introduced and summarized. In addition, the authentication application of modern analytical technology combined with chemometrics methods in four aspects, including origin, processing methods, cultivation methods, and adulteration of HMs have also been discussed and illustrated by a few typical studies. This article offers a general workflow of analytical methods that have been applied for HMs authentication and explains that the accuracy of authentication in favor of the quality assurance of HMs. It was provided reference value for the development and application of modern HMs.

UV-Vis Spectrophotometry and UPLC–PDA Combined with Multivariate Calibration for Kappaphycus alvarezii (Doty) Doty ex Silva Standardization Based on Phenolic Compounds

The algae Kappaphycus alvarezii is considered an important raw material for industrial practices, producing high economic value of various derived products. However, the quality of this commodity, which can be indicated by the level of phenolic compounds, may vary due to growth factors, including cultivation sites. An analytical UV-Vis spectrophotometry method coupled with chemometrics was proposed to standardize the red alga based on the content of phenolic compounds. The correlation between the UV-Vis spectra and UPLC–PDA results, combined with a multivariate calibration of the K. alvarezii extracts, was analyzed. The extracts were prepared using an ultrasound-based technique and subsequently subjected to UV-Vis spectral measurements at 200–800 nm and UPLC–PDA at 260 and 330 nm. Chemometric techniques and partial least squares (PLS) were applied to the acquired data to build a reliable analysis of the phenolics in the K. alvarezii extracts. The result showed that the wavelength combination of 200–450 and 600–690 nm provided a valid method for quantitative analysis of the studied phenolics that belong to hydroxybenzoic acid, hydroxycinnamic acid, and flavonoid with a coefficient of regression (R2) > 0.96 in the calibration and validation models, along with an RMSEC and RMSEP value < 8%. The method was then employed to characterize the K. alvarezii samples from 13 different cultivation areas. Principal component analysis (PCA) generated principal components that produced a clear distribution among the samples of K. alvarezii based on phenolic compounds corresponding to the geographical origin.

A Novel Multi-Preprocessing Integration Method for the Qualitative and Quantitative Assessment of Wild Medicinal Plants: Gentiana rigescens as an Example

Until now, the over-exploitation of wild resources has increased growing concern over the quality of wild medicinal plants. This led to the necessity of developing a rapid method for the evaluation of wild medicinal plants. In this study, the content of total secoiridoids (gentiopicroside, swertiamarin, and sweroside) of Gentiana rigescens from 37 different regions in southwest China were analyzed by high performance liquid chromatography (HPLC). Furthermore, Fourier transform infrared (FT-IR) was adopted to trace the geographical origin (331 individuals) and predict the content of total secoiridoids (273 individuals). In the traditional FT-IR analysis, only one scatter correction technique could be selected from a series of preprocessing candidates to decrease the impact of the light correcting effect. Nevertheless, different scatter correction techniques may carry complementary information so that using the single scatter correction technique is sub-optimal. Hence, the emerging ensemble approach to preprocessing fusion, sequential preprocessing through orthogonalization (SPORT), was carried out to fuse the complementary information linked to different preprocessing methods. The results suggested that, compared with the best results obtained on the scatter correction modeling, SPORT increased the accuracy of the test set by 12.8% in qualitative analysis and decreased the RMSEP by 66.7% in quantitative analysis.

Superiority Verification of Deep Learning in the Identification of Medicinal Plants: Taking Paris polyphylla var. yunnanensis as an Example

Medicinal plants have a variety of values and are an important source of new drugs and their lead compounds. They have played an important role in the treatment of cancer, AIDS, COVID-19 and other major and unconquered diseases. However, there are problems such as uneven quality and adulteration. Therefore, it is of great significance to find comprehensive, efficient and modern technology for its identification and evaluation to ensure quality and efficacy. In this study, deep learning, which is superior to conventional identification techniques, was extended to the identification of the part and region of the medicinal plant Paris polyphylla var. yunnanensis from the perspective of spectroscopy. Two pattern recognition models, partial least squares discriminant analysis (PLS-DA) and support vector machine (SVM), were established, and the overall discrimination performance of the three types of models was compared. In addition, we also compared the effects of different sample sizes on the discriminant performance of the models for the first time to explore whether the three models had sample size dependence. The results showed that the deep learning model had absolute superiority in the identification of medicinal plant. It was almost unaffected by factors such as data type and sample size. The overall identification ability was significantly better than the PLS-DA and SVM models. This study verified the superiority of the deep learning from examples, and provided a practical reference for related research on other medicinal plants.

Application of Identification and Evaluation Techniques for Edible Mushrooms: A Review

Edible mushrooms are healthy food with high nutritional value, which is popular with consumers. With the increase of the problem of mushrooms being confused with the real and pollution in the market, people pay more and more attention to food safety. More than 167 articles of edible mushroom published in the past 20 years were reviewed in this paper. The analysis tools and data analysis methods of identification and quality evaluation of edible mushroom species, origin, mineral elements were reviewed. Five techniques for identification and evaluation of edible mushrooms were introduced and summarized. The macroscopic, microscopic and molecular identification techniques can be used to identify species. Chromatography, spectroscopy technology combined with chemometrics can be used for qualitative and quantitative study of mushroom and evaluation of mushroom quality. In addition, multiple supervised pattern-recognition techniques have good classification ability. Deep learning is more and more widely used in edible mushroom, which shows its advantages in image recognition and prediction. These techniques and analytical methods can provide strong support and guarantee for the identification and evaluation of mushroom, which is of great significance to the development and utilization of edible mushroom.

Method Superior to Traditional Spectral Identification: FT-NIR Two-Dimensional Correlation Spectroscopy Combined with Deep Learning to Identify the Shelf Life of Fresh Phlebopus portentosus

The taste of fresh mushrooms is always appealing. Phlebopus portentosus is the only porcini that can be cultivated artificially in the world, with a daily output of up to 2 tons and a large sales market. Fresh mushrooms are very susceptible to microbial attacks when stored at 0-2 °C for more than 5 days. Therefore, the freshness of P. portentosus must be evaluated during its refrigeration to ensure food safety. According to their freshness, the samples were divided into three categories, namely, category I (1-2 days, 0-48 h, recommended for consumption), category II (3-4 days, 48-96 h, recommended for consumption), and category III (5-6 days, 96-144 h, not recommended). In our study, a fast and reliable shelf life identification method was established through Fourier transform near-infrared (FT-NIR) spectroscopy combined with a machine learning method. Deep learning (DL) is a new focus in the field of food research, so we established a deep learning classification model, traditional support-vector machine (SVM), partial least-squares discriminant analysis (PLS-DA), and an extreme learning machine (ELM) model to identify the shelf life of P. portentosus. The results showed that FT-NIR two-dimensional correlation spectroscopy (2DCOS) combined with the deep learning model was more suitable for the identification of fresh mushroom shelf life and the model had the best robustness. In conclusion, FT-NIR combined with machine learning had the advantages of being nondestructive, fast, and highly accurate in identifying the shelf life of P. portentosus. This method may become a promising rapid analysis tool, which can quickly identify the shelf life of fresh edible mushrooms.